From 78beef2d73c4b0b59ea6536dbd8e7ac9d0219d97 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 14 May 2015 00:25:47 -0700 Subject: [PATCH] Use Mendel default for INVERT_Y_DIR --- Marlin/Configuration.h | 2 +- Marlin/configurator/config/Configuration.h | 2 +- .../RepRapWorld/Megatronics/Configuration.h | 2 +- Marlin/example_configurations/makibox/Configuration.h | 1 + 4 files changed, 4 insertions(+), 3 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f71699db7..8e520fa96 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -357,7 +357,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR false +#define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h index a807a56e9..de4c8a5f7 100644 --- a/Marlin/configurator/config/Configuration.h +++ b/Marlin/configurator/config/Configuration.h @@ -357,7 +357,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR false +#define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index e922f472a..27a258290 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -357,7 +357,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR false +#define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index f1f448029..63a402467 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -327,6 +327,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false + #define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false