Fix spelling of Průša

7 years ago · a4a587a897
parent ba1706a265
commit a4a587a897
25 changed files with 26 additions and 25 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -648,7 +648,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
@ -648,7 +648,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -628,7 +628,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -658,7 +658,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/M150/Configuration_adv.h
@ -648,7 +648,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@ -648,7 +648,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@ -650,7 +650,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@ -650,7 +650,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -647,7 +647,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -647,7 +647,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -652,7 +652,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -647,7 +647,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
@ -648,7 +648,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -645,7 +645,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@ -648,7 +648,7 @@
   *
   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
   *
-   * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.
+   * Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode.
   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
   */
  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
--- a/Marlin/planner.cpp
+++ b/Marlin/planner.cpp
@ -1275,7 +1275,8 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
  #endif

  /**
-   * Adapted from Prusa MKS firmware
+   * Adapted from Průša MKS firmware
+   * https://github.com/prusa3d/Prusa-Firmware
   *
   * Start with a safe speed (from which the machine may halt to stop immediately).
   */