Merge pull request #8488 from Tannoo/1.1.x-led_control_menu

[1.1.x] led control menu
master
Scott Lahteine 7 years ago committed by GitHub
commit ace3e50898
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

@ -90,7 +90,7 @@ script:
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
- opt_enable_adv FWRETRACT MAX7219_DEBUG
- opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU
- opt_set ABL_GRID_POINTS_X 16
- opt_set ABL_GRID_POINTS_Y 16
- opt_set_adv FANMUX0_PIN 53

@ -1096,4 +1096,27 @@
#define MAX_VFAT_ENTRIES (2)
#endif
// Set defaults for unspecified LED user colors
#if ENABLED(LED_CONTROL_MENU)
#ifndef LED_USER_PRESET_RED
#define LED_USER_PRESET_RED 255
#endif
#ifndef LED_USER_PRESET_GREEN
#define LED_USER_PRESET_GREEN 255
#endif
#ifndef LED_USER_PRESET_BLUE
#define LED_USER_PRESET_BLUE 255
#endif
#ifndef LED_USER_PRESET_WHITE
#define LED_USER_PRESET_WHITE 0
#endif
#ifndef LED_USER_PRESET_BRIGHTNESS
#ifdef NEOPIXEL_BRIGHTNESS
#define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
#else
#define LED_USER_PRESET_BRIGHTNESS 255
#endif
#endif
#endif
#endif // CONDITIONALS_POST_H

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -284,17 +284,8 @@
#include "Max7219_Debug_LEDs.h"
#endif
#if ENABLED(NEOPIXEL_LED)
#include <Adafruit_NeoPixel.h>
#endif
#if ENABLED(BLINKM)
#include "blinkm.h"
#include "Wire.h"
#endif
#if ENABLED(PCA9632)
#include "pca9632.h"
#if HAS_COLOR_LEDS
#include "leds.h"
#endif
#if HAS_SERVOS
@ -355,20 +346,6 @@
|| isnan(ubl.z_values[0][0]))
#endif
#if ENABLED(NEOPIXEL_LED)
#if NEOPIXEL_TYPE == NEO_RGB || NEOPIXEL_TYPE == NEO_RBG || NEOPIXEL_TYPE == NEO_GRB || NEOPIXEL_TYPE == NEO_GBR || NEOPIXEL_TYPE == NEO_BRG || NEOPIXEL_TYPE == NEO_BGR
#define NEO_WHITE 255, 255, 255
#else
#define NEO_WHITE 0, 0, 0, 255
#endif
#endif
#if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632)
#define LED_WHITE 255, 255, 255
#elif ENABLED(RGBW_LED)
#define LED_WHITE 0, 0, 0, 255
#endif
#if ENABLED(CNC_COORDINATE_SYSTEMS)
int8_t active_coordinate_system = -1; // machine space
float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ];
@ -1013,98 +990,6 @@ void servo_init() {
#endif
#if HAS_COLOR_LEDS
#if ENABLED(NEOPIXEL_LED)
Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800);
void set_neopixel_color(const uint32_t color) {
for (uint16_t i = 0; i < pixels.numPixels(); ++i)
pixels.setPixelColor(i, color);
pixels.show();
}
void setup_neopixel() {
pixels.setBrightness(NEOPIXEL_BRIGHTNESS); // 0 - 255 range
pixels.begin();
pixels.show(); // initialize to all off
#if ENABLED(NEOPIXEL_STARTUP_TEST)
safe_delay(1000);
set_neopixel_color(pixels.Color(255, 0, 0, 0)); // red
safe_delay(1000);
set_neopixel_color(pixels.Color(0, 255, 0, 0)); // green
safe_delay(1000);
set_neopixel_color(pixels.Color(0, 0, 255, 0)); // blue
safe_delay(1000);
#endif
set_neopixel_color(pixels.Color(NEO_WHITE)); // white
}
#endif // NEOPIXEL_LED
void set_led_color(
const uint8_t r, const uint8_t g, const uint8_t b
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
, const uint8_t w = 0
#if ENABLED(NEOPIXEL_LED)
, const uint8_t p = NEOPIXEL_BRIGHTNESS
, bool isSequence = false
#endif
#endif
) {
#if ENABLED(NEOPIXEL_LED)
const uint32_t color = pixels.Color(r, g, b, w);
static uint16_t nextLed = 0;
pixels.setBrightness(p);
if (!isSequence)
set_neopixel_color(color);
else {
pixels.setPixelColor(nextLed, color);
pixels.show();
if (++nextLed >= pixels.numPixels()) nextLed = 0;
return;
}
#endif
#if ENABLED(BLINKM)
// This variant uses i2c to send the RGB components to the device.
SendColors(r, g, b);
#endif
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
// This variant uses 3 separate pins for the RGB components.
// If the pins can do PWM then their intensity will be set.
WRITE(RGB_LED_R_PIN, r ? HIGH : LOW);
WRITE(RGB_LED_G_PIN, g ? HIGH : LOW);
WRITE(RGB_LED_B_PIN, b ? HIGH : LOW);
analogWrite(RGB_LED_R_PIN, r);
analogWrite(RGB_LED_G_PIN, g);
analogWrite(RGB_LED_B_PIN, b);
#if ENABLED(RGBW_LED)
WRITE(RGB_LED_W_PIN, w ? HIGH : LOW);
analogWrite(RGB_LED_W_PIN, w);
#endif
#endif
#if ENABLED(PCA9632)
// Update I2C LED driver
PCA9632_SetColor(r, g, b);
#endif
}
#endif // HAS_COLOR_LEDS
void gcode_line_error(const char* err, bool doFlush = true) {
SERIAL_ERROR_START();
serialprintPGM(err);
@ -1290,13 +1175,13 @@ inline void get_serial_commands() {
SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
#if ENABLED(PRINTER_EVENT_LEDS)
LCD_MESSAGEPGM(MSG_INFO_COMPLETED_PRINTS);
set_led_color(0, 255, 0); // Green
leds.set_green();
#if HAS_RESUME_CONTINUE
enqueue_and_echo_commands_P(PSTR("M0")); // end of the queue!
#else
safe_delay(1000);
#endif
set_led_color(0, 0, 0); // OFF
leds.set_off();
#endif
card.checkautostart(true);
}
@ -7987,14 +7872,11 @@ inline void gcode_M109() {
const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0);
if (blue != old_blue) {
old_blue = blue;
set_led_color(255, 0, blue
#if ENABLED(NEOPIXEL_LED)
, 0
, pixels.getBrightness()
leds.set_color(
MakeLEDColor(255, 0, blue, 0, pixels.getBrightness())
#if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
, true
#endif
#endif
);
}
}
@ -8031,12 +7913,7 @@ inline void gcode_M109() {
if (wait_for_heatup) {
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
#if ENABLED(PRINTER_EVENT_LEDS)
#if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632) || ENABLED(RGBW_LED)
set_led_color(LED_WHITE);
#endif
#if ENABLED(NEOPIXEL_LED)
set_neopixel_color(pixels.Color(NEO_WHITE));
#endif
leds.set_white();
#endif
}
@ -8132,12 +8009,10 @@ inline void gcode_M109() {
const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255);
if (red != old_red) {
old_red = red;
set_led_color(red, 0, 255
#if ENABLED(NEOPIXEL_LED)
, 0, pixels.getBrightness()
#if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
, true
#endif
leds.set_color(
MakeLEDColor(red, 0, 255, 0, pixels.getBrightness())
#if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
, true
#endif
);
}
@ -8814,17 +8689,13 @@ inline void gcode_M121() { endstops.enable_globally(false); }
* M150 P ; Set LED full brightness
*/
inline void gcode_M150() {
set_led_color(
leds.set_color(MakeLEDColor(
parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
, parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0
#if ENABLED(NEOPIXEL_LED)
, parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness()
#endif
#endif
);
parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness()
));
}
#endif // HAS_COLOR_LEDS
@ -13982,9 +13853,8 @@ void setup() {
OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off
#endif
#if ENABLED(NEOPIXEL_LED)
SET_OUTPUT(NEOPIXEL_PIN);
setup_neopixel();
#if HAS_COLOR_LEDS
leds.setup();
#endif
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)

@ -1514,3 +1514,7 @@ static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too m
#if !BLOCK_BUFFER_SIZE || !IS_POWER_OF_2(BLOCK_BUFFER_SIZE)
#error "BLOCK_BUFFER_SIZE must be a power of 2."
#endif
#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL)
#error "LED_CONTROL_MENU requires an LCD controller."
#endif

@ -21,26 +21,26 @@
*/
/**
* blinkm.cpp - Library for controlling a BlinkM over i2c
* Created by Tim Koster, August 21 2013.
* blinkm.cpp - Control a BlinkM over i2c
*/
#include "Marlin.h"
#include "MarlinConfig.h"
#if ENABLED(BLINKM)
#include "blinkm.h"
#include "leds.h"
#include <Wire.h>
void SendColors(byte red, byte grn, byte blu) {
void blinkm_set_led_color(const LEDColor &color) {
Wire.begin();
Wire.beginTransmission(0x09);
Wire.write('o'); //to disable ongoing script, only needs to be used once
Wire.write('n');
Wire.write(red);
Wire.write(grn);
Wire.write(blu);
Wire.write(color.r);
Wire.write(color.g);
Wire.write(color.b);
Wire.endTransmission();
}
#endif // BLINKM

@ -21,11 +21,15 @@
*/
/**
* blinkm.h - Library for controlling a BlinkM over i2c
* Created by Tim Koster, August 21 2013.
* blinkm.h - Control a BlinkM over i2c
*/
#include "Arduino.h"
#include "Wire.h"
#ifndef _BLINKM_H_
#define _BLINKM_H_
void SendColors(byte red, byte grn, byte blu);
struct LEDColor;
typedef LEDColor LEDColor;
void blinkm_set_led_color(const LEDColor &color);
#endif // _BLINKM_H_

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -471,6 +471,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -495,6 +495,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -484,6 +484,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -484,6 +484,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -484,6 +484,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -484,6 +484,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -489,6 +489,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -484,6 +484,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -482,6 +482,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -472,6 +472,23 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
*/
//#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif
#endif // LED_CONTROL_MENU
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work

@ -362,6 +362,64 @@
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL")
#endif
#ifndef MSG_LED_CONTROL
#define MSG_LED_CONTROL _UxGT("LED Control")
#endif
#ifndef MSG_LEDS_ON
#define MSG_LEDS_ON _UxGT("Lights On")
#endif
#ifndef MSG_LEDS_OFF
#define MSG_LEDS_OFF _UxGT("Lights Off")
#endif
#ifndef MSG_LED_PRESETS
#define MSG_LED_PRESETS _UxGT("Light Presets")
#endif
#ifndef MSG_SET_LEDS_RED
#define MSG_SET_LEDS_RED _UxGT("Lights Red")
#endif
#ifndef MSG_SET_LEDS_ORANGE
#define MSG_SET_LEDS_ORANGE _UxGT("Lights Orange")
#endif
#ifndef MSG_SET_LEDS_YELLOW
#define MSG_SET_LEDS_YELLOW _UxGT("Lights Yellow")
#endif
#ifndef MSG_SET_LEDS_GREEN
#define MSG_SET_LEDS_GREEN _UxGT("Lights Green")
#endif
#ifndef MSG_SET_LEDS_BLUE
#define MSG_SET_LEDS_BLUE _UxGT("Lights Blue")
#endif
#ifndef MSG_SET_LEDS_INDIGO
#define MSG_SET_LEDS_INDIGO _UxGT("Lights Indigo")
#endif
#ifndef MSG_SET_LEDS_VIOLET
#define MSG_SET_LEDS_VIOLET _UxGT("Lights Violet")
#endif
#ifndef MSG_SET_LEDS_WHITE
#define MSG_SET_LEDS_WHITE _UxGT("Lights White")
#endif
#ifndef MSG_SET_LEDS_DEFAULT
#define MSG_SET_LEDS_DEFAULT _UxGT("Lights Default")
#endif
#ifndef MSG_CUSTOM_LEDS
#define MSG_CUSTOM_LEDS _UxGT("Custom Lights")
#endif
#ifndef MSG_INTENSITY_R
#define MSG_INTENSITY_R _UxGT("Red Intensity")
#endif
#ifndef MSG_INTENSITY_G
#define MSG_INTENSITY_G _UxGT("Green Intensity")
#endif
#ifndef MSG_INTENSITY_B
#define MSG_INTENSITY_B _UxGT("Blue Intensity")
#endif
#ifndef MSG_INTENSITY_W
#define MSG_INTENSITY_W _UxGT("White Intensity")
#endif
#ifndef MSG_LED_BRIGHTNESS
#define MSG_LED_BRIGHTNESS _UxGT("Brightness")
#endif
#ifndef MSG_MOVING
#define MSG_MOVING _UxGT("Moving...")
#endif

@ -0,0 +1,140 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* leds.cpp - Marlin RGB LED general support
*/
#include "MarlinConfig.h"
#if HAS_COLOR_LEDS
#include "leds.h"
#if ENABLED(BLINKM)
#include "blinkm.h"
#endif
#if ENABLED(PCA9632)
#include "pca9632.h"
#endif
#if ENABLED(LED_COLOR_PRESETS)
const LEDColor LEDLights::defaultLEDColor = MakeLEDColor(
LED_USER_PRESET_RED,
LED_USER_PRESET_GREEN,
LED_USER_PRESET_BLUE,
LED_USER_PRESET_WHITE,
LED_USER_PRESET_BRIGHTNESS
);
#endif
#if ENABLED(LED_CONTROL_MENU)
LEDColor LEDLights::color;
bool LEDLights::lights_on;
#endif
LEDLights leds;
void LEDLights::setup() {
#if ENABLED(NEOPIXEL_LED)
setup_neopixel();
#endif
#if ENABLED(LED_USER_PRESET_STARTUP)
set_default();
#endif
}
void LEDLights::set_color(const LEDColor &incol
#if ENABLED(NEOPIXEL_LED)
, bool isSequence/*=false*/
#endif
) {
#if ENABLED(NEOPIXEL_LED)
const uint32_t neocolor = pixels.Color(incol.r, incol.g, incol.b, incol.w);
static uint16_t nextLed = 0;
pixels.setBrightness(incol.i);
if (!isSequence)
set_neopixel_color(neocolor);
else {
pixels.setPixelColor(nextLed, neocolor);
pixels.show();
if (++nextLed >= pixels.numPixels()) nextLed = 0;
return;
}
#endif
#if ENABLED(BLINKM)
// This variant uses i2c to send the RGB components to the device.
blinkm_set_led_color(incol);
#endif
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
// This variant uses 3-4 separate pins for the RGB(W) components.
// If the pins can do PWM then their intensity will be set.
WRITE(RGB_LED_R_PIN, incol.r ? HIGH : LOW);
WRITE(RGB_LED_G_PIN, incol.g ? HIGH : LOW);
WRITE(RGB_LED_B_PIN, incol.b ? HIGH : LOW);
analogWrite(RGB_LED_R_PIN, incol.r);
analogWrite(RGB_LED_G_PIN, incol.g);
analogWrite(RGB_LED_B_PIN, incol.b);
#if ENABLED(RGBW_LED)
WRITE(RGB_LED_W_PIN, incol.w ? HIGH : LOW);
analogWrite(RGB_LED_W_PIN, incol.w);
#endif
#endif
#if ENABLED(PCA9632)
// Update I2C LED driver
pca9632_set_led_color(incol);
#endif
#if ENABLED(LED_CONTROL_MENU)
// Don't update the color when OFF
lights_on = !incol.is_off();
if (lights_on) color = incol;
#endif
}
void LEDLights::set_white() {
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(BLINKM) || ENABLED(PCA9632)
set_color(LEDColorWhite());
#endif
#if ENABLED(NEOPIXEL_LED)
set_neopixel_color(pixels.Color(NEO_WHITE));
#endif
}
#if ENABLED(LED_CONTROL_MENU)
void LEDLights::toggle() { if (lights_on) set_off(); else update(); }
#endif
#endif // HAS_COLOR_LEDS

@ -0,0 +1,169 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* leds.h - Marlin general RGB LED support
*/
#ifndef __LEDS_H__
#define __LEDS_H__
#include "MarlinConfig.h"
#if ENABLED(NEOPIXEL_LED)
#include "neopixel.h"
#endif
#define HAS_WHITE_LED (ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED))
/**
* LEDcolor type for use with leds.set_color
*/
typedef struct LEDColor {
uint8_t r, g, b
#if HAS_WHITE_LED
, w
#if ENABLED(NEOPIXEL_LED)
, i
#endif
#endif
;
LEDColor() : r(255), g(255), b(255)
#if HAS_WHITE_LED
, w(255)
#if ENABLED(NEOPIXEL_LED)
, i(NEOPIXEL_BRIGHTNESS)
#endif
#endif
{}
LEDColor(uint8_t r, uint8_t g, uint8_t b
#if HAS_WHITE_LED
, uint8_t w=0
#if ENABLED(NEOPIXEL_LED)
, uint8_t i=NEOPIXEL_BRIGHTNESS
#endif
#endif
) : r(r), g(g), b(b)
#if HAS_WHITE_LED
, w(w)
#if ENABLED(NEOPIXEL_LED)
, i(i)
#endif
#endif
{}
LEDColor& operator=(const LEDColor &right) {
if (this != &right) memcpy(this, &right, sizeof(LEDColor));
return *this;
}
bool operator==(const LEDColor &right) {
if (this == &right) return true;
return 0 == memcmp(this, &right, sizeof(LEDColor));
}
bool operator!=(const LEDColor &right) { return !operator==(right); }
bool is_off() const {
return 3 > r + g + b
#if HAS_WHITE_LED
+ w
#endif
;
}
} LEDColor;
/**
* Color helpers and presets
*/
#if HAS_WHITE_LED
#define LEDColorWhite() LEDColor(0, 0, 0, 255)
#if ENABLED(NEOPIXEL_LED)
#define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W, I)
#else
#define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W)
#endif
#else
#define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B)
#define LEDColorWhite() LEDColor(255, 255, 255)
#endif
#define LEDColorOff() LEDColor( 0, 0, 0)
#define LEDColorRed() LEDColor(255, 0, 0)
#define LEDColorOrange() LEDColor(255, 80, 0)
#define LEDColorYellow() LEDColor(255, 255, 0)
#define LEDColorGreen() LEDColor( 0, 255, 0)
#define LEDColorBlue() LEDColor( 0, 0, 255)
#define LEDColorIndigo() LEDColor( 0, 255, 255)
#define LEDColorViolet() LEDColor(255, 0, 255)
class LEDLights {
public:
LEDLights() {} // ctor
static void setup(); // init()
static void set_color(const LEDColor &color
#if ENABLED(NEOPIXEL_LED)
, bool isSequence=false
#endif
);
FORCE_INLINE void set_color(uint8_t r, uint8_t g, uint8_t b
#if HAS_WHITE_LED
, uint8_t w=0
#if ENABLED(NEOPIXEL_LED)
, uint8_t i=NEOPIXEL_BRIGHTNESS
#endif
#endif
#if ENABLED(NEOPIXEL_LED)
, bool isSequence=false
#endif
) {
set_color(MakeLEDColor(r, g, b, w, i)
#if ENABLED(NEOPIXEL_LED)
, isSequence
#endif
);
}
static void set_white();
FORCE_INLINE static void set_off() { set_color(LEDColorOff()); }
FORCE_INLINE static void set_green() { set_color(LEDColorGreen()); }
#if ENABLED(LED_COLOR_PRESETS)
static const LEDColor defaultLEDColor;
FORCE_INLINE static void set_default() { set_color(defaultLEDColor); }
FORCE_INLINE static void set_red() { set_color(LEDColorRed()); }
FORCE_INLINE static void set_orange() { set_color(LEDColorOrange()); }
FORCE_INLINE static void set_yellow() { set_color(LEDColorYellow()); }
FORCE_INLINE static void set_blue() { set_color(LEDColorBlue()); }
FORCE_INLINE static void set_indigo() { set_color(LEDColorIndigo()); }
FORCE_INLINE static void set_violet() { set_color(LEDColorViolet()); }
#endif
#if ENABLED(LED_CONTROL_MENU)
static LEDColor color; // last non-off color
static bool lights_on; // the last set color was "on"
static void toggle(); // swap "off" with color
FORCE_INLINE static void update() { set_color(color); }
#endif
};
extern LEDLights leds;
#endif // __LEDS_H__

@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* neopixel.cpp
*/
#include "MarlinConfig.h"
#if ENABLED(NEOPIXEL_LED)
#include "neopixel.h"
Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800);
void set_neopixel_color(const uint32_t color) {
for (uint16_t i = 0; i < pixels.numPixels(); ++i)
pixels.setPixelColor(i, color);
pixels.show();
}
void setup_neopixel() {
SET_OUTPUT(NEOPIXEL_PIN);
pixels.setBrightness(NEOPIXEL_BRIGHTNESS); // 0 - 255 range
pixels.begin();
pixels.show(); // initialize to all off
#if ENABLED(NEOPIXEL_STARTUP_TEST)
safe_delay(1000);
set_neopixel_color(pixels.Color(255, 0, 0, 0)); // red
safe_delay(1000);
set_neopixel_color(pixels.Color(0, 255, 0, 0)); // green
safe_delay(1000);
set_neopixel_color(pixels.Color(0, 0, 255, 0)); // blue
safe_delay(1000);
#endif
set_neopixel_color(pixels.Color(NEO_WHITE)); // white
}
#endif // NEOPIXEL_LED

@ -0,0 +1,44 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* neopixel.h
*/
#include "MarlinConfig.h"
#define NEOPIXEL_IS_RGB (NEOPIXEL_TYPE == NEO_RGB || NEOPIXEL_TYPE == NEO_RBG || NEOPIXEL_TYPE == NEO_GRB || NEOPIXEL_TYPE == NEO_GBR || NEOPIXEL_TYPE == NEO_BRG || NEOPIXEL_TYPE == NEO_BGR)
#define NEOPIXEL_IS_RGBW !NEOPIXEL_IS_RGB
#if NEOPIXEL_IS_RGB
#define NEO_WHITE 255, 255, 255, 0
#else
#define NEO_WHITE 0, 0, 0, 255
#endif
#include <Adafruit_NeoPixel.h>
#include <stdint.h>
void setup_neopixel();
void set_neopixel_color(const uint32_t color);
extern Adafruit_NeoPixel pixels;

@ -20,7 +20,7 @@
*
*/
/*
/**
* Driver for the Philips PCA9632 LED driver.
* Written by Robert Mendon Feb 2017.
*/
@ -30,12 +30,13 @@
#if ENABLED(PCA9632)
#include "pca9632.h"
#include "leds.h"
#include <Wire.h>
#define PCA9632_MODE1_VALUE 0b00000001 //(ALLCALL)
#define PCA9632_MODE2_VALUE 0b00010101 //(DIMMING, INVERT, CHANGE ON STOP,TOTEM)
#define PCA9632_LEDOUT_VALUE 0b00101010
/* Register addresses */
#define PCA9632_MODE1 0x00
#define PCA9632_MODE2 0x01
@ -98,7 +99,7 @@ static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const
}
#endif
void PCA9632_SetColor(const byte r, const byte g, const byte b) {
void pca9632_set_led_color(const LEDColor &color) {
if (!PCA_init) {
PCA_init = 1;
Wire.begin();
@ -106,11 +107,11 @@ void PCA9632_SetColor(const byte r, const byte g, const byte b) {
PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE2, PCA9632_MODE2_VALUE);
}
const byte LEDOUT = (r ? LED_PWM << PCA9632_RED : 0)
| (g ? LED_PWM << PCA9632_GRN : 0)
| (b ? LED_PWM << PCA9632_BLU : 0);
const byte LEDOUT = (color.r ? LED_PWM << PCA9632_RED : 0)
| (color.g ? LED_PWM << PCA9632_GRN : 0)
| (color.b ? LED_PWM << PCA9632_BLU : 0);
PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, r, g, b);
PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, color.r, color.g, color.b);
PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_LEDOUT, LEDOUT);
}

@ -20,7 +20,7 @@
*
*/
/*
/**
* Driver for the Philips PCA9632 LED driver.
* Written by Robert Mendon Feb 2017.
*/
@ -28,9 +28,9 @@
#ifndef __PCA9632_H__
#define __PCA9632_H__
#include "Arduino.h"
#include "Wire.h"
struct LEDColor;
typedef LEDColor LEDColor;
void PCA9632_SetColor(const byte r, const byte g, const byte b);
void pca9632_set_led_color(const LEDColor &color);
#endif // __PCA9632_H__

@ -1312,7 +1312,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// The junction velocity will be shared between successive segments. Limit the junction velocity to their minimum.
const bool prev_speed_larger = previous_nominal_speed > block->nominal_speed;
float smaller_speed_factor = prev_speed_larger ? (block->nominal_speed / previous_nominal_speed) : (previous_nominal_speed / block->nominal_speed);
const float smaller_speed_factor = prev_speed_larger ? (block->nominal_speed / previous_nominal_speed) : (previous_nominal_speed / block->nominal_speed);
// Pick the smaller of the nominal speeds. Higher speed shall not be achieved at the junction during coasting.
vmax_junction = prev_speed_larger ? block->nominal_speed : previous_nominal_speed;
// Factor to multiply the previous / current nominal velocities to get componentwise limited velocities.
@ -1444,10 +1444,10 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c
#else
#define _EINDEX E_AXIS
#endif
long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]),
nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]),
nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]),
ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
const long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]),
nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]),
nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]),
ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
#if ENABLED(LIN_ADVANCE)
position_float[X_AXIS] = a;
position_float[Y_AXIS] = b;

@ -184,6 +184,11 @@ uint16_t max_display_update_time = 0;
void lcd_info_menu();
#endif // LCD_INFO_MENU
#if ENABLED(LED_CONTROL_MENU)
#include "leds.h"
void lcd_led_menu();
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void lcd_advanced_pause_toocold_menu();
void lcd_advanced_pause_option_menu();
@ -1013,6 +1018,10 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
#endif
#if ENABLED(LED_CONTROL_MENU)
MENU_ITEM(submenu, MSG_LED_CONTROL, lcd_led_menu);
#endif
END_MENU();
}
@ -3942,6 +3951,66 @@ void kill_screen(const char* lcd_msg) {
}
#endif // LCD_INFO_MENU
/**
*
* LED Menu
*
*/
#if ENABLED(LED_CONTROL_MENU)
#if ENABLED(LED_COLOR_PRESETS)
void lcd_led_presets_menu() {
START_MENU();
#if LCD_HEIGHT > 2
STATIC_ITEM(MSG_LED_PRESETS, true, true);
#endif
MENU_BACK(MSG_LED_CONTROL);
MENU_ITEM(function, MSG_SET_LEDS_WHITE, leds.set_white);
MENU_ITEM(function, MSG_SET_LEDS_RED, leds.set_red);
MENU_ITEM(function, MSG_SET_LEDS_ORANGE, leds.set_orange);
MENU_ITEM(function, MSG_SET_LEDS_YELLOW,leds.set_yellow);
MENU_ITEM(function, MSG_SET_LEDS_GREEN, leds.set_green);
MENU_ITEM(function, MSG_SET_LEDS_BLUE, leds.set_blue);
MENU_ITEM(function, MSG_SET_LEDS_INDIGO, leds.set_indigo);
MENU_ITEM(function, MSG_SET_LEDS_VIOLET, leds.set_violet);
END_MENU();
}
#endif // LED_COLOR_PRESETS
void lcd_led_custom_menu() {
START_MENU();
MENU_BACK(MSG_LED_CONTROL);
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true);
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true);
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true);
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true);
#if ENABLED(NEOPIXEL_LED)
MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true);
#endif
#endif
END_MENU();
}
void lcd_led_menu() {
START_MENU();
MENU_BACK(MSG_MAIN);
if (leds.lights_on)
MENU_ITEM(function, MSG_LEDS_OFF, leds.toggle);
else
MENU_ITEM(function, MSG_LEDS_ON, leds.toggle);
MENU_ITEM(function, MSG_SET_LEDS_DEFAULT, leds.set_default);
#if ENABLED(LED_COLOR_PRESETS)
MENU_ITEM(submenu, MSG_LED_PRESETS, lcd_led_presets_menu);
#endif
MENU_ITEM(submenu, MSG_CUSTOM_LEDS, lcd_led_custom_menu);
END_MENU();
}
#endif // LED_CONTROL_MENU
/**
*
* Filament Change Feature Screens

Loading…
Cancel
Save