diff --git a/Marlin/language.h b/Marlin/language.h index 1b53482d8..973a8929c 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -5,10 +5,11 @@ // 1 Custom (For you to add your own messages) // 2 English // 3 French (Waiting translation) -// 4 German -// 5 Etc +// 4 German (Waiting translation) +// 5 Spanish +// 6 Etc -#define LANGUAGE_CHOICE 1 // Pick your language from the list above +#define LANGUAGE_CHOICE 5 // Pick your language from the list above #define PROTOCOL_VERSION "1.0" @@ -36,7 +37,6 @@ #define MSG_SET_ORIGIN " Set Origin" #define MSG_COOLDOWN " Cooldown" #define MSG_EXTRUDE " Extrude" - #define MSG_RETRACT" Retract" #define MSG_PREHEAT_PLA " Preheat PLA" #define MSG_PREHEAT_ABS " Preheat ABS" #define MSG_MOVE_AXIS " Move Axis \x7E" @@ -87,8 +87,6 @@ #define MSG_CONTROL_ARROW " Control \x7E" #define MSG_RETRACT_ARROW " Control \x7E" #define MSG_TUNE " Tune \x7E" - #define MSG_PAUSE_PRINT " Pause Print \x7E" - #define MSG_RESUME_PRINT " Resume Print \x7E" #define MSG_STOP_PRINT " Stop Print \x7E" #define MSG_CARD_MENU " Card Menu \x7E" #define MSG_NO_CARD " No Card" @@ -99,13 +97,15 @@ #define MSG_PART_RELEASE "Partial Release" #define MSG_KILLED "KILLED. " #define MSG_STOPPED "STOPPED. " + #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_ABS " Preheat ABS" #define MSG_STEPPER_RELEASED "Released." - #define MSG_CONTROL_RETRACT " Retract mm:" - #define MSG_CONTROL_RETRACTF " Retract F:" - #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" - #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" - #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" - #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_CONTROL_RETRACT " Retract mm:" + #define MSG_CONTROL_RETRACTF " Retract F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" // Serial Console Messages @@ -177,25 +177,30 @@ #if LANGUAGE_CHOICE == 4 // LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Bereit." - #define MSG_SD_INSERTED "Karte eingelegt" - #define MSG_SD_REMOVED "Karte entfernt" - #define MSG_MAIN " Haupt \003" + + #define WELCOME_MSG MACHINE_NAME " Ready." + + #define MSG_SD_INSERTED "Card inserted" + #define MSG_SD_REMOVED "Card removed" + #define MSG_MAIN " Main \003" #define MSG_AUTOSTART " Autostart" - #define MSG_DISABLE_STEPPERS " Motoren abschalten" + #define MSG_DISABLE_STEPPERS " Stepper abschalten" #define MSG_AUTO_HOME " Auto Heim" #define MSG_SET_ORIGIN " Position setzen" - #define MSG_COOLDOWN " Abkuehlen" - #define MSG_EXTRUDE " Druck" #define MSG_PREHEAT_PLA " Aufheizen PLA" #define MSG_PREHEAT_ABS " Aufheizen ABS" - #define MSG_MOVE_AXIS " Achse bewegen \x7E" + #define MSG_COOLDOWN " Abkuehlen" + #define MSG_EXTRUDE " Extrude" + #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_ABS " Preheat ABS" + #define MSG_MOVE_AXIS " Move Axis \x7E" + #define MSG_MOVE_AXIS " Achsen verfahren \x7E" #define MSG_SPEED " Geschw:" #define MSG_NOZZLE " \002Duese:" #define MSG_NOZZLE1 " \002Duese2:" #define MSG_NOZZLE2 " \002Duese3:" #define MSG_BED " \002Bett:" - #define MSG_FAN_SPEED " Luefter Geschw.:" + #define MSG_FAN_SPEED " Luefter geschw.:" #define MSG_FLOW " Fluss:" #define MSG_CONTROL " Kontrolle \003" #define MSG_MIN " \002 Min:" @@ -218,42 +223,38 @@ #define MSG_VMIN " Vmin:" #define MSG_VTRAV_MIN " VTrav min:" #define MSG_AMAX " Amax " - #define MSG_A_RETRACT " A-Rueckzug:" + #define MSG_A_RETRACT " A-retract:" #define MSG_XSTEPS " Xsteps/mm:" #define MSG_YSTEPS " Ysteps/mm:" #define MSG_ZSTEPS " Zsteps/mm:" #define MSG_ESTEPS " Esteps/mm:" - #define MSG_MAIN_WIDE " Hauptmenue \003" - #define MSG_RECTRACT_WIDE " Rueckzug \x7E" + #define MSG_MAIN_WIDE " Main \003" #define MSG_TEMPERATURE_WIDE " Temperatur \x7E" - #define MSG_MOTION_WIDE " Bewegung \x7E" + #define MSG_MOTION_WIDE " Motion \x7E" #define MSG_STORE_EPROM " EPROM speichern" #define MSG_LOAD_EPROM " EPROM laden" #define MSG_RESTORE_FAILSAFE " Standard Konfig." - #define MSG_REFRESH "\004Aktualisieren" + #define MSG_REFRESH "\004Refresh" #define MSG_WATCH " Beobachten \003" - #define MSG_PREPARE " Vorbereiten \x7E" - #define MSG_PREPARE_ALT " Vorbereiten \003" - #define MSG_CONTROL_ARROW " Kontrolle \x7E" - #define MSG_RETRACT_ARROW " Control \x7E" + #define MSG_PREPARE " Prepare \x7E" + #define MSG_PREPARE_ALT " Prepare \003" + #define MSG_CONTROL_ARROW " Control \x7E" + #define MSG_TUNE " Tune \x7E" #define MSG_STOP_PRINT " Druck stoppen \x7E" #define MSG_CARD_MENU " SDKarten Menue \x7E" #define MSG_NO_CARD " Keine SDKarte" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur." - #define MSG_DWELL "verweilen..." - #define MSG_USERWAIT "Warten auf Nutzer..." - #define MSG_NO_MOVE "Keine Bewegung." - #define MSG_PART_RELEASE "Teil loesen" - #define MSG_KILLED "GEKILLT. " - #define MSG_STOPPED "GESTOPPT. " - #define MSG_STEPPER_RELEASED "Freigegeben." - #define MSG_CONTROL_RETRACT " Rueckzug mm:" - #define MSG_CONTROL_RETRACTF " Rueckzug F:" - #define MSG_CONTROL_RETRACT_ZLIFT " Z Sprung mm:" - #define MSG_CONTROL_RETRACT_RECOVER " Vorschub +mm:" - #define MSG_CONTROL_RETRACT_RECOVERF " Vorschub F:" - #define MSG_AUTORETRACT " AutoRueckzug.:" + #define MSG_DWELL "DWELL..." + #define MSG_NO_MOVE "No move." + #define MSG_PART_RELEASE "Partial Release" + #define MSG_KILLED "KILLED. " + #define MSG_STOPPED "STOPPED. " + #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_ABS " Preheat ABS" + #define MSG_STEPPER_RELEASED "Released." + + // Serial Console Messages @@ -300,26 +301,177 @@ #define MSG_Z_MIN "z_min:" #define MSG_Z_MAX "z_max:" - #define MSG_SD_CANT_OPEN_SUBDIR "Verz. kein Zugriff" - #define MSG_SD_INIT_FAIL "SD init Fehler" - #define MSG_SD_VOL_INIT_FAIL "volume.init Fehler" - #define MSG_SD_OPENROOT_FAIL "openRoot Fehler" - #define MSG_SD_CARD_OK "SDKarte ok" - #define MSG_SD_WORKDIR_FAIL "workDir Oeffnen Fehler" - #define MSG_SD_OPEN_FILE_FAIL "Fehler: Oeffnen Datei: " - #define MSG_SD_FILE_OPENED "Datei geoeffnet:" - #define MSG_SD_SIZE " Groesse:" - #define MSG_SD_FILE_SELECTED "Datei selektiert" - #define MSG_SD_WRITE_TO_FILE "Schreibe in Datei: " - #define MSG_SD_PRINTING_BYTE "SD druckt byte " - #define MSG_SD_NOT_PRINTING "Druckt nicht von SD" - #define MSG_SD_ERR_WRITE_TO_FILE "Datei Schreibfehler" - #define MSG_SD_CANT_ENTER_SUBDIR "Kann Verz. nicht wechseln:" + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" + + #define MSG_STEPPER_TO_HIGH "Steprate to high : " + #define MSG_ENDSTOPS_HIT "endstops hit: " + #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" + #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + +#endif + +#if LANGUAGE_CHOICE == 5 + +// LCD Menu Messages +#define WELCOME_MSG MACHINE_NAME " Lista." +#define MSG_SD_INSERTED "Tarjeta SD Colocada" +#define MSG_SD_REMOVED "Tarjeta SD Retirada" +#define MSG_MAIN " Menu Principal \003" +#define MSG_AUTOSTART " Autostart" +#define MSG_DISABLE_STEPPERS " Apagar Motores" +#define MSG_AUTO_HOME " Llevar Ejes al Cero" +#define MSG_SET_ORIGIN " Establecer Cero" +#define MSG_COOLDOWN " Enfriar" +#define MSG_EXTRUDE " Extruir" +#define MSG_PREHEAT_PLA " Precalentar PLA" +#define MSG_PREHEAT_ABS " Precalentar ABS" +#define MSG_MOVE_AXIS " Mover Ejes \x7E" +#define MSG_SPEED " Velocidad:" +#define MSG_NOZZLE " \002Nozzle:" +#define MSG_NOZZLE1 " \002Nozzle2:" +#define MSG_NOZZLE2 " \002Nozzle3:" +#define MSG_BED " \002Bed:" +#define MSG_FAN_SPEED " Ventilador:" +#define MSG_FLOW " Flujo:" +#define MSG_CONTROL " Control \003" +#define MSG_MIN " \002 Min:" +#define MSG_MAX " \002 Max:" +#define MSG_FACTOR " \002 Fact:" +#define MSG_AUTOTEMP " Autotemp:" +#define MSG_ON "On " +#define MSG_OFF "Off" +#define MSG_PID_P " PID-P: " +#define MSG_PID_I " PID-I: " +#define MSG_PID_D " PID-D: " +#define MSG_PID_C " PID-C: " +#define MSG_ACC " Acc:" +#define MSG_VXY_JERK " Vxy-jerk: " +#define MSG_VMAX " Vmax " +#define MSG_X "x:" +#define MSG_Y "y:" +#define MSG_Z "z:" +#define MSG_E "e:" +#define MSG_VMIN " Vmin:" +#define MSG_VTRAV_MIN " VTrav min:" +#define MSG_AMAX " Amax " +#define MSG_A_RETRACT " A-retrac.:" +#define MSG_XSTEPS " Xpasos/mm:" +#define MSG_YSTEPS " Ypasos/mm:" +#define MSG_ZSTEPS " Zpasos/mm:" +#define MSG_ESTEPS " Epasos/mm:" +#define MSG_MAIN_WIDE " Menu Principal \003" +#define MSG_RECTRACT_WIDE " Retraer \x7E" +#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" +#define MSG_MOTION_WIDE " Movimiento \x7E" +#define MSG_STORE_EPROM " Guardar Memoria" +#define MSG_LOAD_EPROM " Cargar Memoria" +#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" +#define MSG_REFRESH "\004Volver a cargar" +#define MSG_WATCH " Monitorizar \003" +#define MSG_PREPARE " Preparar \x7E" +#define MSG_PREPARE_ALT " Preparar \003" +#define MSG_CONTROL_ARROW " Control \x7E" +#define MSG_RETRACT_ARROW " Control \x7E" +#define MSG_TUNE " Ajustar \x7E" +#define MSG_STOP_PRINT " Detener Impresion \x7E" +#define MSG_CARD_MENU " Menu de SD \x7E" +#define MSG_NO_CARD " No hay Tarjeta SD" +#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu" +#define MSG_DWELL "Reposo..." +#define MSG_USERWAIT "Esperando Ordenes..." +#define MSG_NO_MOVE "Sin movimiento" +#define MSG_PART_RELEASE "Desacople Parcial" +#define MSG_KILLED "PARADA DE EMERGENCIA. " +#define MSG_STOPPED "PARADA. " +#define MSG_PREHEAT_PLA " Precalentar PLA" +#define MSG_PREHEAT_ABS " Precalentar ABS" +#define MSG_STEPPER_RELEASED "Desacoplada." +#define MSG_CONTROL_RETRACT " Retraer mm:" +#define MSG_CONTROL_RETRACTF " Retraer F:" +#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" +#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" +#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" +#define MSG_AUTORETRACT " AutoRetr.:" + +// Serial Console Messages + +#define MSG_Enqueing "En cola \"" +#define MSG_POWERUP "PowerUp" +#define MSG_EXTERNAL_RESET " Reset Externo" +#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" +#define MSG_WATCHDOG_RESET " Reset por Bloqueo" +#define MSG_SOFTWARE_RESET " Reset por Software" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Autor: " +#define MSG_CONFIGURATION_VER " Ultima actualizacion: " +#define MSG_FREE_MEMORY " Memoria libre: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Guardado." +#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" +#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" +#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" +#define MSG_FILE_PRINTED "Impresion terminado" +#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" +#define MSG_END_FILE_LIST "Fin de la lista de archivos" +#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " +#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " +#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" +#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " +#define MSG_HEATING "Calientando..." +#define MSG_HEATING_COMPLETE "Calentamiento terminado." +#define MSG_BED_HEATING "Calentando la base." +#define MSG_BED_DONE "Base Caliente." +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Cuenta X:" +#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" +#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" +#define MSG_RESEND "Reenviar:" +#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" +#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " +#define MSG_INVALID_EXTRUDER "Extrusor Invalido" +#define MSG_X_MIN "x_min:" +#define MSG_X_MAX "x_max:" +#define MSG_Y_MIN "y_min:" +#define MSG_Y_MAX "y_max:" +#define MSG_Z_MIN "z_min:" +#define MSG_Z_MAX "z_max:" + +#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." +#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" +#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" +#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" +#define MSG_SD_CARD_OK "Tarjeta SD OK" +#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" +#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " +#define MSG_SD_FILE_OPENED "Archivo abierto:" +#define MSG_SD_SIZE " Tamaño:" +#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" +#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " +#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " +#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" +#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" +#define MSG_SD_CANT_ENTER_SUBDIR "No se puede entrar en la carpeta:" - #define MSG_STEPPER_TO_HIGH "Steprate zu hoch : " - #define MSG_ENDSTOPS_HIT "Endstop erreicht: " - #define MSG_ERR_COLD_EXTRUDE_STOP " kalter Druck unterbunden" - #define MSG_ERR_LONG_EXTRUDE_STOP " langer Druckweg unterbunden" +#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : " +#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " +#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" +#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #endif -#endif // ifndef LANGUAGE_H +#endif // ifndef LANGUAGE_H