- Fixed issue where temp updates stops updating in status screen.
- Added feedrate controls.
- Added tune print menu.
- Added ability to extrude/retract from touch UI
- Added support for M300 gcode.
- Fixed glitches with the sound code.
- Added USB drive code.
- Note: This is pending the relicensing of the USB code from "GPL v2" to "GPL v2 and later"
which the authors have agreed upon.
- Added ability to browse directory hierarchy.
master
Marcio Teixeira
6 years ago
parent
6f8605bc63
commit
b110fd01e7
@ -0,0 +1,85 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
* \brief Sd2Card class for V2 SD/SDHC cards
|
||||
*/
|
||||
|
||||
#ifndef _FAKE_SD2CARD_H_
|
||||
#define _FAKE_SD2CARD_H_
|
||||
|
||||
#include "SdFatConfig.h"
|
||||
#include "SdInfo.h"
|
||||
|
||||
// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
|
||||
uint8_t const SPI_FULL_SPEED = 0, // Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate().
|
||||
SPI_HALF_SPEED = 1, // Set SCK rate to F_CPU/4. See Sd2Card::setSckRate().
|
||||
SPI_QUARTER_SPEED = 2, // Set SCK rate to F_CPU/8. See Sd2Card::setSckRate().
|
||||
SPI_EIGHTH_SPEED = 3, // Set SCK rate to F_CPU/16. See Sd2Card::setSckRate().
|
||||
SPI_SIXTEENTH_SPEED = 4; // Set SCK rate to F_CPU/32. See Sd2Card::setSckRate().
|
||||
|
||||
/**
|
||||
* define SOFTWARE_SPI to use bit-bang SPI
|
||||
*/
|
||||
#if MEGA_SOFT_SPI
|
||||
#define SOFTWARE_SPI
|
||||
#elif USE_SOFTWARE_SPI
|
||||
#define SOFTWARE_SPI
|
||||
#endif
|
||||
|
||||
// SPI pin definitions - do not edit here - change in SdFatConfig.h
|
||||
#if DISABLED(SOFTWARE_SPI)
|
||||
// hardware pin defs
|
||||
#define SD_CHIP_SELECT_PIN SS_PIN // The default chip select pin for the SD card is SS.
|
||||
// The following three pins must not be redefined for hardware SPI.
|
||||
#define SPI_MOSI_PIN MOSI_PIN // SPI Master Out Slave In pin
|
||||
#define SPI_MISO_PIN MISO_PIN // SPI Master In Slave Out pin
|
||||
#define SPI_SCK_PIN SCK_PIN // SPI Clock pin
|
||||
#else // SOFTWARE_SPI
|
||||
#define SD_CHIP_SELECT_PIN SOFT_SPI_CS_PIN // SPI chip select pin
|
||||
#define SPI_MOSI_PIN SOFT_SPI_MOSI_PIN // SPI Master Out Slave In pin
|
||||
#define SPI_MISO_PIN SOFT_SPI_MISO_PIN // SPI Master In Slave Out pin
|
||||
#define SPI_SCK_PIN SOFT_SPI_SCK_PIN // SPI Clock pin
|
||||
#endif // SOFTWARE_SPI
|
||||
|
||||
/**
|
||||
* \class Sd2Card
|
||||
* \brief Raw access to SD and SDHC flash memory cards.
|
||||
*/
|
||||
class Sd2Card {
|
||||
public:
|
||||
|
||||
Sd2Card();
|
||||
|
||||
/**
|
||||
* Initialize an SD flash memory card with default clock rate and chip
|
||||
* select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
|
||||
*
|
||||
* \return true for success or false for failure.
|
||||
*/
|
||||
bool init(uint8_t sckRateID = 0, uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
|
||||
bool readBlock(uint32_t block, uint8_t* dst);
|
||||
bool writeBlock(uint32_t blockNumber, const uint8_t* src);
|
||||
};
|
||||
|
||||
#endif // _FAKE_SD2CARD_H_
|
||||
@ -0,0 +1,147 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/********************************************************************************************
|
||||
* This program/sketch is used to run a USB Thumb Drive. *
|
||||
* *
|
||||
* NOTE - This Arduino Sketch has been modified to initialize a MAX3421E USB Host Interface *
|
||||
* chip, write 3 test files, print out the directory of the thumb drive and print out the *
|
||||
* contents of a short .txt file. *
|
||||
* *
|
||||
* The code is leveraged from the following: *
|
||||
* *
|
||||
* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. *
|
||||
* *
|
||||
* This software may be distributed and modified under the terms of the GNU *
|
||||
* General Public License version 2 (GPL2) as published by the Free Software *
|
||||
* Foundation and appearing in the file GPL2.TXT included in the packaging of *
|
||||
* this file. Please note that GPL2 Section 2[b] requires that all works based *
|
||||
* on this software must also be made publicly available under the terms of *
|
||||
* the GPL2 ("Copyleft"). *
|
||||
* *
|
||||
* Contact information *
|
||||
* ------------------- *
|
||||
* *
|
||||
* Circuits At Home, LTD *
|
||||
* Web : http://www.circuitsathome.com *
|
||||
* e-mail : support@circuitsathome.com *
|
||||
* *
|
||||
* SPECIAL NOTE - In order to work with a modified Eisny or RAMBo, the SPI chip select pin *
|
||||
* (CS) (D10) has been remapped from PORTB Pin-4 to PORTB Pin-0. This has been done in the *
|
||||
* __AVR_ATmega2560__ section of the avrpins.h file. *
|
||||
* *
|
||||
********************************************************************************************/
|
||||
|
||||
#include <SPI.h>
|
||||
|
||||
//#define _usb_h_
|
||||
|
||||
#include "Marlin.h"
|
||||
#include "../watchdog.h"
|
||||
|
||||
#undef MACROS_H
|
||||
|
||||
#define USB_HOST_SERIAL customizedSerial
|
||||
|
||||
#include "lib/masstorage.h"
|
||||
#include "lib/masstorage.cpp"
|
||||
#include "lib/message.cpp"
|
||||
#include "lib/parsetools.cpp"
|
||||
#include "lib/Usb.cpp"
|
||||
|
||||
|
||||
#include "Fake_Sd2Card.h"
|
||||
|
||||
#define MAX_USB_RST 7
|
||||
|
||||
// USB host objects.v
|
||||
USB usb;
|
||||
BulkOnly bulk(&usb);
|
||||
|
||||
#define error(msg) {Serial.print("Error: "); Serial.println(msg);}
|
||||
|
||||
#define TIMEOUT_MILLIS 4000
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
bool initUSB(USB* usb) {
|
||||
uint8_t current_state = 0;
|
||||
uint32_t m = millis();
|
||||
|
||||
for (uint8_t i = 0; usb->Init(1000) == -1; i++)
|
||||
{
|
||||
SERIAL_ECHOLNPGM("No USB HOST Shield?");
|
||||
watchdog_reset();
|
||||
if (i > 10) {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
usb->vbusPower(vbus_on);
|
||||
|
||||
while ((millis() - m) < TIMEOUT_MILLIS) {
|
||||
usb->Task();
|
||||
current_state = usb->getUsbTaskState();
|
||||
if(current_state == USB_STATE_RUNNING) {
|
||||
return true;
|
||||
}
|
||||
watchdog_reset();
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
Sd2Card::Sd2Card() {
|
||||
};
|
||||
|
||||
bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
|
||||
if (!initUSB(&usb))
|
||||
{
|
||||
SERIAL_ECHOLNPGM("initUSB failed");
|
||||
}
|
||||
else
|
||||
{
|
||||
SERIAL_ECHOLNPGM("USB Initialized\n");
|
||||
}
|
||||
|
||||
if(!bulk.LUNIsGood(0)) {
|
||||
SERIAL_ECHOLNPGM("LUN zero is not good\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
SERIAL_ECHOLNPAIR("LUN Capacity: ",bulk.GetCapacity(0));
|
||||
|
||||
const uint32_t sectorSize = bulk.GetSectorSize(0);
|
||||
if(sectorSize != 512) {
|
||||
SERIAL_ECHOLNPAIR("Expecting sector size of 512, got: ",sectorSize);
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool Sd2Card::readBlock(uint32_t block, uint8_t* dst) {
|
||||
return bulk.Read(0, block, 512, 1, dst) == 0;
|
||||
}
|
||||
|
||||
bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
|
||||
return bulk.Write(0, blockNumber, 512, 1, src) == 0;
|
||||
}
|
||||
|
||||
@ -0,0 +1,812 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
/* USB functions */
|
||||
|
||||
#include "Usb.h"
|
||||
|
||||
static uint8_t usb_error = 0;
|
||||
static uint8_t usb_task_state;
|
||||
|
||||
/* constructor */
|
||||
USB::USB() : bmHubPre(0) {
|
||||
usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE; //set up state machine
|
||||
init();
|
||||
}
|
||||
|
||||
/* Initialize data structures */
|
||||
void USB::init() {
|
||||
//devConfigIndex = 0;
|
||||
bmHubPre = 0;
|
||||
}
|
||||
|
||||
uint8_t USB::getUsbTaskState(void) {
|
||||
return ( usb_task_state);
|
||||
}
|
||||
|
||||
void USB::setUsbTaskState(uint8_t state) {
|
||||
usb_task_state = state;
|
||||
}
|
||||
|
||||
EpInfo* USB::getEpInfoEntry(uint8_t addr, uint8_t ep) {
|
||||
UsbDevice *p = addrPool.GetUsbDevicePtr(addr);
|
||||
|
||||
if(!p || !p->epinfo)
|
||||
return NULL;
|
||||
|
||||
EpInfo *pep = p->epinfo;
|
||||
|
||||
for(uint8_t i = 0; i < p->epcount; i++) {
|
||||
if((pep)->epAddr == ep)
|
||||
return pep;
|
||||
|
||||
pep++;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/* set device table entry */
|
||||
|
||||
/* each device is different and has different number of endpoints. This function plugs endpoint record structure, defined in application, to devtable */
|
||||
uint8_t USB::setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr) {
|
||||
if(!eprecord_ptr)
|
||||
return USB_ERROR_INVALID_ARGUMENT;
|
||||
|
||||
UsbDevice *p = addrPool.GetUsbDevicePtr(addr);
|
||||
|
||||
if(!p)
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
|
||||
p->address.devAddress = addr;
|
||||
p->epinfo = eprecord_ptr;
|
||||
p->epcount = epcount;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t USB::SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t &nak_limit) {
|
||||
UsbDevice *p = addrPool.GetUsbDevicePtr(addr);
|
||||
|
||||
if(!p)
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
|
||||
if(!p->epinfo)
|
||||
return USB_ERROR_EPINFO_IS_NULL;
|
||||
|
||||
*ppep = getEpInfoEntry(addr, ep);
|
||||
|
||||
if(!*ppep)
|
||||
return USB_ERROR_EP_NOT_FOUND_IN_TBL;
|
||||
|
||||
nak_limit = (0x0001UL << (((*ppep)->bmNakPower > USB_NAK_MAX_POWER) ? USB_NAK_MAX_POWER : (*ppep)->bmNakPower));
|
||||
nak_limit--;
|
||||
/*
|
||||
USBTRACE2("\r\nAddress: ", addr);
|
||||
USBTRACE2(" EP: ", ep);
|
||||
USBTRACE2(" NAK Power: ",(*ppep)->bmNakPower);
|
||||
USBTRACE2(" NAK Limit: ", nak_limit);
|
||||
USBTRACE("\r\n");
|
||||
*/
|
||||
regWr(rPERADDR, addr); //set peripheral address
|
||||
|
||||
uint8_t mode = regRd(rMODE);
|
||||
|
||||
//Serial.print("\r\nMode: ");
|
||||
//Serial.println( mode, HEX);
|
||||
//Serial.print("\r\nLS: ");
|
||||
//Serial.println(p->lowspeed, HEX);
|
||||
|
||||
|
||||
|
||||
// Set bmLOWSPEED and bmHUBPRE in case of low-speed device, reset them otherwise
|
||||
regWr(rMODE, (p->lowspeed) ? mode | bmLOWSPEED | bmHubPre : mode & ~(bmHUBPRE | bmLOWSPEED));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Control transfer. Sets address, endpoint, fills control packet with necessary data, dispatches control packet, and initiates bulk IN transfer, */
|
||||
/* depending on request. Actual requests are defined as inlines */
|
||||
/* return codes: */
|
||||
/* 00 = success */
|
||||
|
||||
/* 01-0f = non-zero HRSLT */
|
||||
uint8_t USB::ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi,
|
||||
uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p) {
|
||||
bool direction = false; //request direction, IN or OUT
|
||||
uint8_t rcode;
|
||||
SETUP_PKT setup_pkt;
|
||||
|
||||
EpInfo *pep = NULL;
|
||||
uint16_t nak_limit = 0;
|
||||
|
||||
rcode = SetAddress(addr, ep, &pep, nak_limit);
|
||||
|
||||
if(rcode)
|
||||
return rcode;
|
||||
|
||||
direction = ((bmReqType & 0x80) > 0);
|
||||
|
||||
/* fill in setup packet */
|
||||
setup_pkt.ReqType_u.bmRequestType = bmReqType;
|
||||
setup_pkt.bRequest = bRequest;
|
||||
setup_pkt.wVal_u.wValueLo = wValLo;
|
||||
setup_pkt.wVal_u.wValueHi = wValHi;
|
||||
setup_pkt.wIndex = wInd;
|
||||
setup_pkt.wLength = total;
|
||||
|
||||
bytesWr(rSUDFIFO, 8, (uint8_t*) & setup_pkt); //transfer to setup packet FIFO
|
||||
|
||||
rcode = dispatchPkt(tokSETUP, ep, nak_limit); //dispatch packet
|
||||
|
||||
if(rcode) //return HRSLT if not zero
|
||||
return ( rcode);
|
||||
|
||||
if(dataptr != NULL) //data stage, if present
|
||||
{
|
||||
if(direction) //IN transfer
|
||||
{
|
||||
uint16_t left = total;
|
||||
|
||||
pep->bmRcvToggle = 1; //bmRCVTOG1;
|
||||
|
||||
while(left) {
|
||||
// Bytes read into buffer
|
||||
uint16_t read = nbytes;
|
||||
//uint16_t read = (left<nbytes) ? left : nbytes;
|
||||
|
||||
rcode = InTransfer(pep, nak_limit, &read, dataptr);
|
||||
if(rcode == hrTOGERR) {
|
||||
// yes, we flip it wrong here so that next time it is actually correct!
|
||||
pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1;
|
||||
continue;
|
||||
}
|
||||
|
||||
if(rcode)
|
||||
return rcode;
|
||||
|
||||
// Invoke callback function if inTransfer completed successfully and callback function pointer is specified
|
||||
if(!rcode && p)
|
||||
((USBReadParser*)p)->Parse(read, dataptr, total - left);
|
||||
|
||||
left -= read;
|
||||
|
||||
if(read < nbytes)
|
||||
break;
|
||||
}
|
||||
} else //OUT transfer
|
||||
{
|
||||
pep->bmSndToggle = 1; //bmSNDTOG1;
|
||||
rcode = OutTransfer(pep, nak_limit, nbytes, dataptr);
|
||||
}
|
||||
if(rcode) //return error
|
||||
return ( rcode);
|
||||
}
|
||||
// Status stage
|
||||
return dispatchPkt((direction) ? tokOUTHS : tokINHS, ep, nak_limit); //GET if direction
|
||||
}
|
||||
|
||||
/* IN transfer to arbitrary endpoint. Assumes PERADDR is set. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */
|
||||
/* Keep sending INs and writes data to memory area pointed by 'data' */
|
||||
|
||||
/* rcode 0 if no errors. rcode 01-0f is relayed from dispatchPkt(). Rcode f0 means RCVDAVIRQ error,
|
||||
fe USB xfer timeout */
|
||||
uint8_t USB::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data) {
|
||||
EpInfo *pep = NULL;
|
||||
uint16_t nak_limit = 0;
|
||||
|
||||
uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit);
|
||||
|
||||
if(rcode) {
|
||||
USBTRACE3("(USB::InTransfer) SetAddress Failed ", rcode, 0x81);
|
||||
USBTRACE3("(USB::InTransfer) addr requested ", addr, 0x81);
|
||||
USBTRACE3("(USB::InTransfer) ep requested ", ep, 0x81);
|
||||
return rcode;
|
||||
}
|
||||
return InTransfer(pep, nak_limit, nbytesptr, data);
|
||||
}
|
||||
|
||||
uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t* data) {
|
||||
uint8_t rcode = 0;
|
||||
uint8_t pktsize;
|
||||
|
||||
uint16_t nbytes = *nbytesptr;
|
||||
//printf("Requesting %i bytes ", nbytes);
|
||||
uint8_t maxpktsize = pep->maxPktSize;
|
||||
|
||||
*nbytesptr = 0;
|
||||
regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value
|
||||
|
||||
// use a 'break' to exit this loop
|
||||
while(1) {
|
||||
rcode = dispatchPkt(tokIN, pep->epAddr, nak_limit); //IN packet to EP-'endpoint'. Function takes care of NAKS.
|
||||
if(rcode == hrTOGERR) {
|
||||
// yes, we flip it wrong here so that next time it is actually correct!
|
||||
pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1;
|
||||
regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value
|
||||
continue;
|
||||
}
|
||||
if(rcode) {
|
||||
//printf(">>>>>>>> Problem! dispatchPkt %2.2x\r\n", rcode);
|
||||
break; //should be 0, indicating ACK. Else return error code.
|
||||
}
|
||||
/* check for RCVDAVIRQ and generate error if not present */
|
||||
/* the only case when absence of RCVDAVIRQ makes sense is when toggle error occurred. Need to add handling for that */
|
||||
if((regRd(rHIRQ) & bmRCVDAVIRQ) == 0) {
|
||||
//printf(">>>>>>>> Problem! NO RCVDAVIRQ!\r\n");
|
||||
rcode = 0xf0; //receive error
|
||||
break;
|
||||
}
|
||||
pktsize = regRd(rRCVBC); //number of received bytes
|
||||
//printf("Got %i bytes \r\n", pktsize);
|
||||
// This would be OK, but...
|
||||
//assert(pktsize <= nbytes);
|
||||
if(pktsize > nbytes) {
|
||||
// This can happen. Use of assert on Arduino locks up the Arduino.
|
||||
// So I will trim the value, and hope for the best.
|
||||
//printf(">>>>>>>> Problem! Wanted %i bytes but got %i.\r\n", nbytes, pktsize);
|
||||
pktsize = nbytes;
|
||||
}
|
||||
|
||||
int16_t mem_left = (int16_t)nbytes - *((int16_t*)nbytesptr);
|
||||
|
||||
if(mem_left < 0)
|
||||
mem_left = 0;
|
||||
|
||||
data = bytesRd(rRCVFIFO, ((pktsize > mem_left) ? mem_left : pktsize), data);
|
||||
|
||||
regWr(rHIRQ, bmRCVDAVIRQ); // Clear the IRQ & free the buffer
|
||||
*nbytesptr += pktsize; // add this packet's byte count to total transfer length
|
||||
|
||||
/* The transfer is complete under two conditions: */
|
||||
/* 1. The device sent a short packet (L.T. maxPacketSize) */
|
||||
/* 2. 'nbytes' have been transferred. */
|
||||
if((pktsize < maxpktsize) || (*nbytesptr >= nbytes)) // have we transferred 'nbytes' bytes?
|
||||
{
|
||||
// Save toggle value
|
||||
pep->bmRcvToggle = ((regRd(rHRSL) & bmRCVTOGRD)) ? 1 : 0;
|
||||
//printf("\r\n");
|
||||
rcode = 0;
|
||||
break;
|
||||
} // if
|
||||
} //while( 1 )
|
||||
return ( rcode);
|
||||
}
|
||||
|
||||
/* OUT transfer to arbitrary endpoint. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */
|
||||
/* Handles NAK bug per Maxim Application Note 4000 for single buffer transfer */
|
||||
|
||||
/* rcode 0 if no errors. rcode 01-0f is relayed from HRSL */
|
||||
uint8_t USB::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data) {
|
||||
EpInfo *pep = NULL;
|
||||
uint16_t nak_limit = 0;
|
||||
|
||||
uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit);
|
||||
|
||||
if(rcode)
|
||||
return rcode;
|
||||
|
||||
return OutTransfer(pep, nak_limit, nbytes, data);
|
||||
}
|
||||
|
||||
uint8_t USB::OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data) {
|
||||
uint8_t rcode = hrSUCCESS, retry_count;
|
||||
uint8_t *data_p = data; //local copy of the data pointer
|
||||
uint16_t bytes_tosend, nak_count;
|
||||
uint16_t bytes_left = nbytes;
|
||||
|
||||
uint8_t maxpktsize = pep->maxPktSize;
|
||||
|
||||
if(maxpktsize < 1 || maxpktsize > 64)
|
||||
return USB_ERROR_INVALID_MAX_PKT_SIZE;
|
||||
|
||||
unsigned long timeout = millis() + USB_XFER_TIMEOUT;
|
||||
|
||||
regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value
|
||||
|
||||
while(bytes_left) {
|
||||
retry_count = 0;
|
||||
nak_count = 0;
|
||||
bytes_tosend = (bytes_left >= maxpktsize) ? maxpktsize : bytes_left;
|
||||
bytesWr(rSNDFIFO, bytes_tosend, data_p); //filling output FIFO
|
||||
regWr(rSNDBC, bytes_tosend); //set number of bytes
|
||||
regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet
|
||||
while(!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ
|
||||
regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ
|
||||
rcode = (regRd(rHRSL) & 0x0f);
|
||||
|
||||
while(rcode && ((long)(millis() - timeout) < 0L)) {
|
||||
switch(rcode) {
|
||||
case hrNAK:
|
||||
nak_count++;
|
||||
if(nak_limit && (nak_count == nak_limit))
|
||||
goto breakout;
|
||||
//return ( rcode);
|
||||
break;
|
||||
case hrTIMEOUT:
|
||||
retry_count++;
|
||||
if(retry_count == USB_RETRY_LIMIT)
|
||||
goto breakout;
|
||||
//return ( rcode);
|
||||
break;
|
||||
case hrTOGERR:
|
||||
// yes, we flip it wrong here so that next time it is actually correct!
|
||||
pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1;
|
||||
regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value
|
||||
break;
|
||||
default:
|
||||
goto breakout;
|
||||
}//switch( rcode
|
||||
|
||||
/* process NAK according to Host out NAK bug */
|
||||
regWr(rSNDBC, 0);
|
||||
regWr(rSNDFIFO, *data_p);
|
||||
regWr(rSNDBC, bytes_tosend);
|
||||
regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet
|
||||
while(!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ
|
||||
regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ
|
||||
rcode = (regRd(rHRSL) & 0x0f);
|
||||
}//while( rcode && ....
|
||||
bytes_left -= bytes_tosend;
|
||||
data_p += bytes_tosend;
|
||||
}//while( bytes_left...
|
||||
breakout:
|
||||
|
||||
pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 1 : 0; //bmSNDTOG1 : bmSNDTOG0; //update toggle
|
||||
return ( rcode); //should be 0 in all cases
|
||||
}
|
||||
/* dispatch USB packet. Assumes peripheral address is set and relevant buffer is loaded/empty */
|
||||
/* If NAK, tries to re-send up to nak_limit times */
|
||||
/* If nak_limit == 0, do not count NAKs, exit after timeout */
|
||||
/* If bus timeout, re-sends up to USB_RETRY_LIMIT times */
|
||||
|
||||
/* return codes 0x00-0x0f are HRSLT( 0x00 being success ), 0xff means timeout */
|
||||
uint8_t USB::dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit) {
|
||||
unsigned long timeout = millis() + USB_XFER_TIMEOUT;
|
||||
uint8_t tmpdata;
|
||||
uint8_t rcode = hrSUCCESS;
|
||||
uint8_t retry_count = 0;
|
||||
uint16_t nak_count = 0;
|
||||
|
||||
while((long)(millis() - timeout) < 0L) {
|
||||
regWr(rHXFR, (token | ep)); //launch the transfer
|
||||
rcode = USB_ERROR_TRANSFER_TIMEOUT;
|
||||
|
||||
while((long)(millis() - timeout) < 0L) //wait for transfer completion
|
||||
{
|
||||
tmpdata = regRd(rHIRQ);
|
||||
|
||||
if(tmpdata & bmHXFRDNIRQ) {
|
||||
regWr(rHIRQ, bmHXFRDNIRQ); //clear the interrupt
|
||||
rcode = 0x00;
|
||||
break;
|
||||
}//if( tmpdata & bmHXFRDNIRQ
|
||||
|
||||
}//while ( millis() < timeout
|
||||
|
||||
//if (rcode != 0x00) //exit if timeout
|
||||
// return ( rcode);
|
||||
|
||||
rcode = (regRd(rHRSL) & 0x0f); //analyze transfer result
|
||||
|
||||
switch(rcode) {
|
||||
case hrNAK:
|
||||
nak_count++;
|
||||
if(nak_limit && (nak_count == nak_limit))
|
||||
return (rcode);
|
||||
break;
|
||||
case hrTIMEOUT:
|
||||
retry_count++;
|
||||
if(retry_count == USB_RETRY_LIMIT)
|
||||
return (rcode);
|
||||
break;
|
||||
default:
|
||||
return (rcode);
|
||||
}//switch( rcode
|
||||
|
||||
}//while( timeout > millis()
|
||||
return ( rcode);
|
||||
}
|
||||
|
||||
/* USB main task. Performs enumeration/cleanup */
|
||||
void USB::Task(void) //USB state machine
|
||||
{
|
||||
uint8_t rcode;
|
||||
uint8_t tmpdata;
|
||||
static unsigned long delay = 0;
|
||||
//USB_DEVICE_DESCRIPTOR buf;
|
||||
bool lowspeed = false;
|
||||
|
||||
MAX3421E::Task();
|
||||
|
||||
tmpdata = getVbusState();
|
||||
|
||||
/* modify USB task state if Vbus changed */
|
||||
switch(tmpdata) {
|
||||
case SE1: //illegal state
|
||||
usb_task_state = USB_DETACHED_SUBSTATE_ILLEGAL;
|
||||
lowspeed = false;
|
||||
break;
|
||||
case SE0: //disconnected
|
||||
if((usb_task_state & USB_STATE_MASK) != USB_STATE_DETACHED)
|
||||
usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE;
|
||||
lowspeed = false;
|
||||
break;
|
||||
case LSHOST:
|
||||
|
||||
lowspeed = true;
|
||||
//intentional fallthrough
|
||||
case FSHOST: //attached
|
||||
if((usb_task_state & USB_STATE_MASK) == USB_STATE_DETACHED) {
|
||||
delay = millis() + USB_SETTLE_DELAY;
|
||||
usb_task_state = USB_ATTACHED_SUBSTATE_SETTLE;
|
||||
}
|
||||
break;
|
||||
}// switch( tmpdata
|
||||
|
||||
for(uint8_t i = 0; i < USB_NUMDEVICES; i++)
|
||||
if(devConfig[i])
|
||||
rcode = devConfig[i]->Poll();
|
||||
|
||||
switch(usb_task_state) {
|
||||
case USB_DETACHED_SUBSTATE_INITIALIZE:
|
||||
init();
|
||||
|
||||
for(uint8_t i = 0; i < USB_NUMDEVICES; i++)
|
||||
if(devConfig[i])
|
||||
rcode = devConfig[i]->Release();
|
||||
|
||||
usb_task_state = USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE;
|
||||
break;
|
||||
case USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE: //just sit here
|
||||
break;
|
||||
case USB_DETACHED_SUBSTATE_ILLEGAL: //just sit here
|
||||
break;
|
||||
case USB_ATTACHED_SUBSTATE_SETTLE: //settle time for just attached device
|
||||
if((long)(millis() - delay) >= 0L)
|
||||
usb_task_state = USB_ATTACHED_SUBSTATE_RESET_DEVICE;
|
||||
else break; // don't fall through
|
||||
case USB_ATTACHED_SUBSTATE_RESET_DEVICE:
|
||||
regWr(rHCTL, bmBUSRST); //issue bus reset
|
||||
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE;
|
||||
break;
|
||||
case USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE:
|
||||
if((regRd(rHCTL) & bmBUSRST) == 0) {
|
||||
tmpdata = regRd(rMODE) | bmSOFKAENAB; //start SOF generation
|
||||
regWr(rMODE, tmpdata);
|
||||
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_SOF;
|
||||
//delay = millis() + 20; //20ms wait after reset per USB spec
|
||||
}
|
||||
break;
|
||||
case USB_ATTACHED_SUBSTATE_WAIT_SOF: //todo: change check order
|
||||
if(regRd(rHIRQ) & bmFRAMEIRQ) {
|
||||
//when first SOF received _and_ 20ms has passed we can continue
|
||||
/*
|
||||
if (delay < millis()) //20ms passed
|
||||
usb_task_state = USB_STATE_CONFIGURING;
|
||||
*/
|
||||
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET;
|
||||
delay = millis() + 20;
|
||||
}
|
||||
break;
|
||||
case USB_ATTACHED_SUBSTATE_WAIT_RESET:
|
||||
if((long)(millis() - delay) >= 0L) usb_task_state = USB_STATE_CONFIGURING;
|
||||
else break; // don't fall through
|
||||
case USB_STATE_CONFIGURING:
|
||||
|
||||
//Serial.print("\r\nConf.LS: ");
|
||||
//Serial.println(lowspeed, HEX);
|
||||
|
||||
rcode = Configuring(0, 0, lowspeed);
|
||||
|
||||
if(rcode) {
|
||||
if(rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE) {
|
||||
usb_error = rcode;
|
||||
usb_task_state = USB_STATE_ERROR;
|
||||
}
|
||||
} else
|
||||
usb_task_state = USB_STATE_RUNNING;
|
||||
break;
|
||||
case USB_STATE_RUNNING:
|
||||
break;
|
||||
case USB_STATE_ERROR:
|
||||
//MAX3421E::Init();
|
||||
break;
|
||||
} // switch( usb_task_state )
|
||||
}
|
||||
|
||||
uint8_t USB::DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed) {
|
||||
//uint8_t buf[12];
|
||||
uint8_t rcode;
|
||||
UsbDevice *p0 = NULL, *p = NULL;
|
||||
|
||||
// Get pointer to pseudo device with address 0 assigned
|
||||
p0 = addrPool.GetUsbDevicePtr(0);
|
||||
|
||||
if(!p0)
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
|
||||
if(!p0->epinfo)
|
||||
return USB_ERROR_EPINFO_IS_NULL;
|
||||
|
||||
p0->lowspeed = (lowspeed) ? true : false;
|
||||
|
||||
// Allocate new address according to device class
|
||||
uint8_t bAddress = addrPool.AllocAddress(parent, false, port);
|
||||
|
||||
if(!bAddress)
|
||||
return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL;
|
||||
|
||||
p = addrPool.GetUsbDevicePtr(bAddress);
|
||||
|
||||
if(!p)
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
|
||||
p->lowspeed = lowspeed;
|
||||
|
||||
// Assign new address to the device
|
||||
rcode = setAddr(0, 0, bAddress);
|
||||
|
||||
if(rcode) {
|
||||
addrPool.FreeAddress(bAddress);
|
||||
bAddress = 0;
|
||||
return rcode;
|
||||
}
|
||||
return 0;
|
||||
};
|
||||
|
||||
uint8_t USB::AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lowspeed) {
|
||||
//printf("AttemptConfig: parent = %i, port = %i\r\n", parent, port);
|
||||
uint8_t retries = 0;
|
||||
|
||||
again:
|
||||
uint8_t rcode = devConfig[driver]->ConfigureDevice(parent, port, lowspeed);
|
||||
if(rcode == USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET) {
|
||||
if(parent == 0) {
|
||||
// Send a bus reset on the root interface.
|
||||
regWr(rHCTL, bmBUSRST); //issue bus reset
|
||||
DELAY(102); // delay 102ms, compensate for clock inaccuracy.
|
||||
} else {
|
||||
// reset parent port
|
||||
devConfig[parent]->ResetHubPort(port);
|
||||
}
|
||||
} else if(rcode == hrJERR && retries < 3) { // Some devices returns this when plugged in - trying to initialize the device again usually works
|
||||
DELAY(100);
|
||||
retries++;
|
||||
goto again;
|
||||
} else if(rcode)
|
||||
return rcode;
|
||||
|
||||
rcode = devConfig[driver]->Init(parent, port, lowspeed);
|
||||
if(rcode == hrJERR && retries < 3) { // Some devices returns this when plugged in - trying to initialize the device again usually works
|
||||
DELAY(100);
|
||||
retries++;
|
||||
goto again;
|
||||
}
|
||||
if(rcode) {
|
||||
// Issue a bus reset, because the device may be in a limbo state
|
||||
if(parent == 0) {
|
||||
// Send a bus reset on the root interface.
|
||||
regWr(rHCTL, bmBUSRST); //issue bus reset
|
||||
DELAY(102); // delay 102ms, compensate for clock inaccuracy.
|
||||
} else {
|
||||
// reset parent port
|
||||
devConfig[parent]->ResetHubPort(port);
|
||||
}
|
||||
}
|
||||
return rcode;
|
||||
}
|
||||
|
||||
/*
|
||||
* This is broken. We need to enumerate differently.
|
||||
* It causes major problems with several devices if detected in an unexpected order.
|
||||
*
|
||||
*
|
||||
* Oleg - I wouldn't do anything before the newly connected device is considered sane.
|
||||
* i.e.(delays are not indicated for brevity):
|
||||
* 1. reset
|
||||
* 2. GetDevDescr();
|
||||
* 3a. If ACK, continue with allocating address, addressing, etc.
|
||||
* 3b. Else reset again, count resets, stop at some number (5?).
|
||||
* 4. When max.number of resets is reached, toggle power/fail
|
||||
* If desired, this could be modified by performing two resets with GetDevDescr() in the middle - however, from my experience, if a device answers to GDD()
|
||||
* it doesn't need to be reset again
|
||||
* New steps proposal:
|
||||
* 1: get address pool instance. exit on fail
|
||||
* 2: pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf). exit on fail.
|
||||
* 3: bus reset, 100ms delay
|
||||
* 4: set address
|
||||
* 5: pUsb->setEpInfoEntry(bAddress, 1, epInfo), exit on fail
|
||||
* 6: while (configurations) {
|
||||
* for(each configuration) {
|
||||
* for (each driver) {
|
||||
* 6a: Ask device if it likes configuration. Returns 0 on OK.
|
||||
* If successful, the driver configured device.
|
||||
* The driver now owns the endpoints, and takes over managing them.
|
||||
* The following will need codes:
|
||||
* Everything went well, instance consumed, exit with success.
|
||||
* Instance already in use, ignore it, try next driver.
|
||||
* Not a supported device, ignore it, try next driver.
|
||||
* Not a supported configuration for this device, ignore it, try next driver.
|
||||
* Could not configure device, fatal, exit with fail.
|
||||
* }
|
||||
* }
|
||||
* }
|
||||
* 7: for(each driver) {
|
||||
* 7a: Ask device if it knows this VID/PID. Acts exactly like 6a, but using VID/PID
|
||||
* 8: if we get here, no driver likes the device plugged in, so exit failure.
|
||||
*
|
||||
*/
|
||||
uint8_t USB::Configuring(uint8_t parent, uint8_t port, bool lowspeed) {
|
||||
//uint8_t bAddress = 0;
|
||||
//printf("Configuring: parent = %i, port = %i\r\n", parent, port);
|
||||
uint8_t devConfigIndex;
|
||||
uint8_t rcode = 0;
|
||||
uint8_t buf[sizeof (USB_DEVICE_DESCRIPTOR)];
|
||||
USB_DEVICE_DESCRIPTOR *udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR *>(buf);
|
||||
UsbDevice *p = NULL;
|
||||
EpInfo *oldep_ptr = NULL;
|
||||
EpInfo epInfo;
|
||||
|
||||
epInfo.epAddr = 0;
|
||||
epInfo.maxPktSize = 8;
|
||||
epInfo.epAttribs = 0;
|
||||
epInfo.bmNakPower = USB_NAK_MAX_POWER;
|
||||
|
||||
//DELAY(2000);
|
||||
AddressPool &addrPool = GetAddressPool();
|
||||
// Get pointer to pseudo device with address 0 assigned
|
||||
p = addrPool.GetUsbDevicePtr(0);
|
||||
if(!p) {
|
||||
//printf("Configuring error: USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL\r\n");
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
}
|
||||
|
||||
// Save old pointer to EP_RECORD of address 0
|
||||
oldep_ptr = p->epinfo;
|
||||
|
||||
// Temporary assign new pointer to epInfo to p->epinfo in order to
|
||||
// avoid toggle inconsistence
|
||||
|
||||
p->epinfo = &epInfo;
|
||||
|
||||
p->lowspeed = lowspeed;
|
||||
// Get device descriptor
|
||||
rcode = getDevDescr(0, 0, sizeof (USB_DEVICE_DESCRIPTOR), (uint8_t*)buf);
|
||||
|
||||
// Restore p->epinfo
|
||||
p->epinfo = oldep_ptr;
|
||||
|
||||
if(rcode) {
|
||||
//printf("Configuring error: Can't get USB_DEVICE_DESCRIPTOR\r\n");
|
||||
return rcode;
|
||||
}
|
||||
|
||||
// to-do?
|
||||
// Allocate new address according to device class
|
||||
//bAddress = addrPool.AllocAddress(parent, false, port);
|
||||
|
||||
uint16_t vid = udd->idVendor;
|
||||
uint16_t pid = udd->idProduct;
|
||||
uint8_t klass = udd->bDeviceClass;
|
||||
uint8_t subklass = udd->bDeviceSubClass;
|
||||
// Attempt to configure if VID/PID or device class matches with a driver
|
||||
// Qualify with subclass too.
|
||||
//
|
||||
// VID/PID & class tests default to false for drivers not yet ported
|
||||
// subclass defaults to true, so you don't have to define it if you don't have to.
|
||||
//
|
||||
for(devConfigIndex = 0; devConfigIndex < USB_NUMDEVICES; devConfigIndex++) {
|
||||
if(!devConfig[devConfigIndex]) continue; // no driver
|
||||
if(devConfig[devConfigIndex]->GetAddress()) continue; // consumed
|
||||
if(devConfig[devConfigIndex]->DEVSUBCLASSOK(subklass) && (devConfig[devConfigIndex]->VIDPIDOK(vid, pid) || devConfig[devConfigIndex]->DEVCLASSOK(klass))) {
|
||||
rcode = AttemptConfig(devConfigIndex, parent, port, lowspeed);
|
||||
if(rcode != USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED)
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if(devConfigIndex < USB_NUMDEVICES) {
|
||||
return rcode;
|
||||
}
|
||||
|
||||
|
||||
// blindly attempt to configure
|
||||
for(devConfigIndex = 0; devConfigIndex < USB_NUMDEVICES; devConfigIndex++) {
|
||||
if(!devConfig[devConfigIndex]) continue;
|
||||
if(devConfig[devConfigIndex]->GetAddress()) continue; // consumed
|
||||
if(devConfig[devConfigIndex]->DEVSUBCLASSOK(subklass) && (devConfig[devConfigIndex]->VIDPIDOK(vid, pid) || devConfig[devConfigIndex]->DEVCLASSOK(klass))) continue; // If this is true it means it must have returned USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED above
|
||||
rcode = AttemptConfig(devConfigIndex, parent, port, lowspeed);
|
||||
|
||||
//printf("ERROR ENUMERATING %2.2x\r\n", rcode);
|
||||
if(!(rcode == USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED || rcode == USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE)) {
|
||||
// in case of an error dev_index should be reset to 0
|
||||
// in order to start from the very beginning the
|
||||
// next time the program gets here
|
||||
//if (rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE)
|
||||
// devConfigIndex = 0;
|
||||
return rcode;
|
||||
}
|
||||
}
|
||||
// if we get here that means that the device class is not supported by any of registered classes
|
||||
rcode = DefaultAddressing(parent, port, lowspeed);
|
||||
|
||||
return rcode;
|
||||
}
|
||||
|
||||
uint8_t USB::ReleaseDevice(uint8_t addr) {
|
||||
if(!addr)
|
||||
return 0;
|
||||
|
||||
for(uint8_t i = 0; i < USB_NUMDEVICES; i++) {
|
||||
if(!devConfig[i]) continue;
|
||||
if(devConfig[i]->GetAddress() == addr)
|
||||
return devConfig[i]->Release();
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if 1 //!defined(USB_METHODS_INLINE)
|
||||
//get device descriptor
|
||||
|
||||
uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, nbytes, dataptr, NULL));
|
||||
}
|
||||
//get configuration descriptor
|
||||
|
||||
uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, nbytes, dataptr, NULL));
|
||||
}
|
||||
|
||||
/* Requests Configuration Descriptor. Sends two Get Conf Descr requests. The first one gets the total length of all descriptors, then the second one requests this
|
||||
total length. The length of the first request can be shorter ( 4 bytes ), however, there are devices which won't work unless this length is set to 9 */
|
||||
uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p) {
|
||||
const uint8_t bufSize = 64;
|
||||
uint8_t buf[bufSize];
|
||||
USB_CONFIGURATION_DESCRIPTOR *ucd = reinterpret_cast<USB_CONFIGURATION_DESCRIPTOR *>(buf);
|
||||
|
||||
uint8_t ret = getConfDescr(addr, ep, 9, conf, buf);
|
||||
|
||||
if(ret)
|
||||
return ret;
|
||||
|
||||
uint16_t total = ucd->wTotalLength;
|
||||
|
||||
//USBTRACE2("\r\ntotal conf.size:", total);
|
||||
|
||||
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, total, bufSize, buf, p));
|
||||
}
|
||||
|
||||
//get string descriptor
|
||||
|
||||
uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t ns, uint8_t index, uint16_t langid, uint8_t* dataptr) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, ns, ns, dataptr, NULL));
|
||||
}
|
||||
//set address
|
||||
|
||||
uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) {
|
||||
uint8_t rcode = ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL);
|
||||
//DELAY(2); //per USB 2.0 sect.9.2.6.3
|
||||
DELAY(300); // Older spec says you should wait at least 200ms
|
||||
return rcode;
|
||||
//return ( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL));
|
||||
}
|
||||
//set configuration
|
||||
|
||||
uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL));
|
||||
}
|
||||
|
||||
#endif // defined(USB_METHODS_INLINE)
|
||||
@ -0,0 +1,39 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
/* USB functions */
|
||||
#ifndef _usb_h_
|
||||
#define _usb_h_
|
||||
|
||||
// WARNING: Do not change the order of includes, or stuff will break!
|
||||
#include <inttypes.h>
|
||||
#include <stddef.h>
|
||||
#include <stdio.h>
|
||||
|
||||
// None of these should ever be included by a driver, or a user's sketch.
|
||||
#include "settings.h"
|
||||
#include "printhex.h"
|
||||
#include "message.h"
|
||||
#include "max3421e.h"
|
||||
#include "address.h"
|
||||
#include "avrpins.h"
|
||||
#include "usb_ch9.h"
|
||||
#include "usbhost.h"
|
||||
#include "UsbCore.h"
|
||||
#include "parsetools.h"
|
||||
#include "confdescparser.h"
|
||||
|
||||
#endif //_usb_h_
|
||||
@ -0,0 +1,296 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#if !defined(_usb_h_) || defined(USBCORE_H)
|
||||
#error "Never include UsbCore.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define USBCORE_H
|
||||
|
||||
// Not used anymore? If anyone uses this, please let us know so that this may be
|
||||
// moved to the proper place, settings.h.
|
||||
//#define USB_METHODS_INLINE
|
||||
|
||||
/* shield pins. First parameter - SS pin, second parameter - INT pin */
|
||||
#ifdef BOARD_BLACK_WIDDOW
|
||||
typedef MAX3421e<P6, P3> MAX3421E; // Black Widow
|
||||
#elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
|
||||
#if EXT_RAM
|
||||
typedef MAX3421e<P20, P7> MAX3421E; // Teensy++ 2.0 with XMEM2
|
||||
#else
|
||||
typedef MAX3421e<P9, P8> MAX3421E; // Teensy++ 1.0 and 2.0
|
||||
#endif
|
||||
#elif defined(BOARD_MEGA_ADK)
|
||||
typedef MAX3421e<P53, P54> MAX3421E; // Arduino Mega ADK
|
||||
#elif defined(ARDUINO_AVR_BALANDUINO)
|
||||
typedef MAX3421e<P20, P19> MAX3421E; // Balanduino
|
||||
#else
|
||||
typedef MAX3421e<P10, P9> MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega, 2560, Leonardo, Due etc.) or Teensy 2.0 and 3.0
|
||||
#endif
|
||||
|
||||
/* Common setup data constant combinations */
|
||||
#define bmREQ_GET_DESCR USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE //get descriptor request type
|
||||
#define bmREQ_SET USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE //set request type for all but 'set feature' and 'set interface'
|
||||
#define bmREQ_CL_GET_INTF USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE //get interface request type
|
||||
|
||||
// D7 data transfer direction (0 - host-to-device, 1 - device-to-host)
|
||||
// D6-5 Type (0- standard, 1 - class, 2 - vendor, 3 - reserved)
|
||||
// D4-0 Recipient (0 - device, 1 - interface, 2 - endpoint, 3 - other, 4..31 - reserved)
|
||||
|
||||
// USB Device Classes
|
||||
#define USB_CLASS_USE_CLASS_INFO 0x00 // Use Class Info in the Interface Descriptors
|
||||
#define USB_CLASS_AUDIO 0x01 // Audio
|
||||
#define USB_CLASS_COM_AND_CDC_CTRL 0x02 // Communications and CDC Control
|
||||
#define USB_CLASS_HID 0x03 // HID
|
||||
#define USB_CLASS_PHYSICAL 0x05 // Physical
|
||||
#define USB_CLASS_IMAGE 0x06 // Image
|
||||
#define USB_CLASS_PRINTER 0x07 // Printer
|
||||
#define USB_CLASS_MASS_STORAGE 0x08 // Mass Storage
|
||||
#define USB_CLASS_HUB 0x09 // Hub
|
||||
#define USB_CLASS_CDC_DATA 0x0a // CDC-Data
|
||||
#define USB_CLASS_SMART_CARD 0x0b // Smart-Card
|
||||
#define USB_CLASS_CONTENT_SECURITY 0x0d // Content Security
|
||||
#define USB_CLASS_VIDEO 0x0e // Video
|
||||
#define USB_CLASS_PERSONAL_HEALTH 0x0f // Personal Healthcare
|
||||
#define USB_CLASS_DIAGNOSTIC_DEVICE 0xdc // Diagnostic Device
|
||||
#define USB_CLASS_WIRELESS_CTRL 0xe0 // Wireless Controller
|
||||
#define USB_CLASS_MISC 0xef // Miscellaneous
|
||||
#define USB_CLASS_APP_SPECIFIC 0xfe // Application Specific
|
||||
#define USB_CLASS_VENDOR_SPECIFIC 0xff // Vendor Specific
|
||||
|
||||
// Additional Error Codes
|
||||
#define USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED 0xD1
|
||||
#define USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE 0xD2
|
||||
#define USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS 0xD3
|
||||
#define USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL 0xD4
|
||||
#define USB_ERROR_HUB_ADDRESS_OVERFLOW 0xD5
|
||||
#define USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL 0xD6
|
||||
#define USB_ERROR_EPINFO_IS_NULL 0xD7
|
||||
#define USB_ERROR_INVALID_ARGUMENT 0xD8
|
||||
#define USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE 0xD9
|
||||
#define USB_ERROR_INVALID_MAX_PKT_SIZE 0xDA
|
||||
#define USB_ERROR_EP_NOT_FOUND_IN_TBL 0xDB
|
||||
#define USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET 0xE0
|
||||
#define USB_ERROR_FailGetDevDescr 0xE1
|
||||
#define USB_ERROR_FailSetDevTblEntry 0xE2
|
||||
#define USB_ERROR_FailGetConfDescr 0xE3
|
||||
#define USB_ERROR_TRANSFER_TIMEOUT 0xFF
|
||||
|
||||
#define USB_XFER_TIMEOUT 10000 //30000 // (5000) USB transfer timeout in milliseconds, per section 9.2.6.1 of USB 2.0 spec
|
||||
//#define USB_NAK_LIMIT 32000 //NAK limit for a transfer. 0 means NAKs are not counted
|
||||
#define USB_RETRY_LIMIT 3 // 3 retry limit for a transfer
|
||||
#define USB_SETTLE_DELAY 200 //settle delay in milliseconds
|
||||
|
||||
#define USB_NUMDEVICES 16 //number of USB devices
|
||||
//#define HUB_MAX_HUBS 7 // maximum number of hubs that can be attached to the host controller
|
||||
#define HUB_PORT_RESET_DELAY 20 // hub port reset delay 10 ms recomended, can be up to 20 ms
|
||||
|
||||
/* USB state machine states */
|
||||
#define USB_STATE_MASK 0xf0
|
||||
|
||||
#define USB_STATE_DETACHED 0x10
|
||||
#define USB_DETACHED_SUBSTATE_INITIALIZE 0x11
|
||||
#define USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE 0x12
|
||||
#define USB_DETACHED_SUBSTATE_ILLEGAL 0x13
|
||||
#define USB_ATTACHED_SUBSTATE_SETTLE 0x20
|
||||
#define USB_ATTACHED_SUBSTATE_RESET_DEVICE 0x30
|
||||
#define USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE 0x40
|
||||
#define USB_ATTACHED_SUBSTATE_WAIT_SOF 0x50
|
||||
#define USB_ATTACHED_SUBSTATE_WAIT_RESET 0x51
|
||||
#define USB_ATTACHED_SUBSTATE_GET_DEVICE_DESCRIPTOR_SIZE 0x60
|
||||
#define USB_STATE_ADDRESSING 0x70
|
||||
#define USB_STATE_CONFIGURING 0x80
|
||||
#define USB_STATE_RUNNING 0x90
|
||||
#define USB_STATE_ERROR 0xa0
|
||||
|
||||
class USBDeviceConfig {
|
||||
public:
|
||||
|
||||
virtual uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
virtual uint8_t ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
virtual uint8_t Release() {
|
||||
return 0;
|
||||
}
|
||||
|
||||
virtual uint8_t Poll() {
|
||||
return 0;
|
||||
}
|
||||
|
||||
virtual uint8_t GetAddress() {
|
||||
return 0;
|
||||
}
|
||||
|
||||
virtual void ResetHubPort(uint8_t port) {
|
||||
return;
|
||||
} // Note used for hubs only!
|
||||
|
||||
virtual boolean VIDPIDOK(uint16_t vid, uint16_t pid) {
|
||||
return false;
|
||||
}
|
||||
|
||||
virtual boolean DEVCLASSOK(uint8_t klass) {
|
||||
return false;
|
||||
}
|
||||
|
||||
virtual boolean DEVSUBCLASSOK(uint8_t subklass) {
|
||||
return true;
|
||||
}
|
||||
|
||||
};
|
||||
|
||||
/* USB Setup Packet Structure */
|
||||
typedef struct {
|
||||
|
||||
union { // offset description
|
||||
uint8_t bmRequestType; // 0 Bit-map of request type
|
||||
|
||||
struct {
|
||||
uint8_t recipient : 5; // Recipient of the request
|
||||
uint8_t type : 2; // Type of request
|
||||
uint8_t direction : 1; // Direction of data X-fer
|
||||
} __attribute__((packed));
|
||||
} ReqType_u;
|
||||
uint8_t bRequest; // 1 Request
|
||||
|
||||
union {
|
||||
uint16_t wValue; // 2 Depends on bRequest
|
||||
|
||||
struct {
|
||||
uint8_t wValueLo;
|
||||
uint8_t wValueHi;
|
||||
} __attribute__((packed));
|
||||
} wVal_u;
|
||||
uint16_t wIndex; // 4 Depends on bRequest
|
||||
uint16_t wLength; // 6 Depends on bRequest
|
||||
} __attribute__((packed)) SETUP_PKT, *PSETUP_PKT;
|
||||
|
||||
|
||||
|
||||
// Base class for incoming data parser
|
||||
|
||||
class USBReadParser {
|
||||
public:
|
||||
virtual void Parse(const uint16_t len, const uint8_t *pbuf, const uint16_t &offset) = 0;
|
||||
};
|
||||
|
||||
class USB : public MAX3421E {
|
||||
AddressPoolImpl<USB_NUMDEVICES> addrPool;
|
||||
USBDeviceConfig* devConfig[USB_NUMDEVICES];
|
||||
uint8_t bmHubPre;
|
||||
|
||||
public:
|
||||
USB(void);
|
||||
|
||||
void SetHubPreMask() {
|
||||
bmHubPre |= bmHUBPRE;
|
||||
};
|
||||
|
||||
void ResetHubPreMask() {
|
||||
bmHubPre &= (~bmHUBPRE);
|
||||
};
|
||||
|
||||
AddressPool& GetAddressPool() {
|
||||
return (AddressPool&)addrPool;
|
||||
};
|
||||
|
||||
uint8_t RegisterDeviceClass(USBDeviceConfig *pdev) {
|
||||
for(uint8_t i = 0; i < USB_NUMDEVICES; i++) {
|
||||
if(!devConfig[i]) {
|
||||
devConfig[i] = pdev;
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
return USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS;
|
||||
};
|
||||
|
||||
void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) {
|
||||
addrPool.ForEachUsbDevice(pfunc);
|
||||
};
|
||||
uint8_t getUsbTaskState(void);
|
||||
void setUsbTaskState(uint8_t state);
|
||||
|
||||
EpInfo* getEpInfoEntry(uint8_t addr, uint8_t ep);
|
||||
uint8_t setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr);
|
||||
|
||||
/* Control requests */
|
||||
uint8_t getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr);
|
||||
uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr);
|
||||
|
||||
uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p);
|
||||
|
||||
uint8_t getStrDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr);
|
||||
uint8_t setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr);
|
||||
uint8_t setConf(uint8_t addr, uint8_t ep, uint8_t conf_value);
|
||||
/**/
|
||||
uint8_t ctrlData(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr, boolean direction);
|
||||
uint8_t ctrlStatus(uint8_t ep, boolean direction, uint16_t nak_limit);
|
||||
uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data);
|
||||
uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data);
|
||||
uint8_t dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit);
|
||||
|
||||
void Task(void);
|
||||
|
||||
uint8_t DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed);
|
||||
uint8_t Configuring(uint8_t parent, uint8_t port, bool lowspeed);
|
||||
uint8_t ReleaseDevice(uint8_t addr);
|
||||
|
||||
uint8_t ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi,
|
||||
uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p);
|
||||
|
||||
private:
|
||||
void init();
|
||||
uint8_t SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t &nak_limit);
|
||||
uint8_t OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data);
|
||||
uint8_t InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data);
|
||||
uint8_t AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lowspeed);
|
||||
};
|
||||
|
||||
#if 0 //defined(USB_METHODS_INLINE)
|
||||
//get device descriptor
|
||||
|
||||
inline uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, dataptr));
|
||||
}
|
||||
//get configuration descriptor
|
||||
|
||||
inline uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, dataptr));
|
||||
}
|
||||
//get string descriptor
|
||||
|
||||
inline uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t nuint8_ts, uint8_t index, uint16_t langid, uint8_t* dataptr) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, nuint8_ts, dataptr));
|
||||
}
|
||||
//set address
|
||||
|
||||
inline uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) {
|
||||
return ( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, NULL));
|
||||
}
|
||||
//set configuration
|
||||
|
||||
inline uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) {
|
||||
return ( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, NULL));
|
||||
}
|
||||
|
||||
#endif // defined(USB_METHODS_INLINE)
|
||||
|
||||
#endif /* USBCORE_H */
|
||||
@ -0,0 +1,147 @@
|
||||
/********************************************************************************************
|
||||
* This program/sketch is used to run a USB Thumb Drive. *
|
||||
* *
|
||||
* NOTE - This Arduino Sketch has been modified to initialize a MAX3421E USB Host Interface *
|
||||
* chip, write 3 test files, print out the directory of the thumb drive and print out the *
|
||||
* contents of a short .txt file. *
|
||||
* *
|
||||
* The code is leveraged from the following: *
|
||||
* *
|
||||
* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. *
|
||||
* *
|
||||
* This software may be distributed and modified under the terms of the GNU *
|
||||
* General Public License version 2 (GPL2) as published by the Free Software *
|
||||
* Foundation and appearing in the file GPL2.TXT included in the packaging of *
|
||||
* this file. Please note that GPL2 Section 2[b] requires that all works based *
|
||||
* on this software must also be made publicly available under the terms of *
|
||||
* the GPL2 ("Copyleft"). *
|
||||
* *
|
||||
* Contact information *
|
||||
* ------------------- *
|
||||
* *
|
||||
* Circuits At Home, LTD *
|
||||
* Web : http://www.circuitsathome.com *
|
||||
* e-mail : support@circuitsathome.com *
|
||||
* *
|
||||
* SPECIAL NOTE - In order to work with a modified Eisny or RAMBo, the SPI chip select pin *
|
||||
* (CS) (D10) has been remapped from PORTB Pin-4 to PORTB Pin-0. This has been done in the *
|
||||
* __AVR_ATmega2560__ section of the avrpins.h file. *
|
||||
* *
|
||||
********************************************************************************************/
|
||||
|
||||
#include <SPI.h>
|
||||
#include "masstorage.h"
|
||||
|
||||
#define MAX_USB_RST 7
|
||||
|
||||
// USB host objects.v
|
||||
USB usb;
|
||||
BulkOnly bulk(&usb);
|
||||
|
||||
#define error(msg) {Serial.print("Error: "); Serial.println(msg);}
|
||||
|
||||
#define TIMEOUT_MILLIS 4000
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
bool initUSB(USB* usb) {
|
||||
uint8_t last_state = 0;
|
||||
uint8_t current_state = 0;
|
||||
uint32_t m = millis();
|
||||
|
||||
for (uint8_t i = 0; usb->Init(1000) == -1; i++)
|
||||
{
|
||||
//if (USB_FAT_DBG_MODE) {
|
||||
Serial.println(F("No USB HOST Shield?"));
|
||||
//}
|
||||
if (i > 10) {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
#if USB_FAT_DBG_MODE
|
||||
Serial.print(F("Host initialized, ms: "));
|
||||
Serial.println(millis() - m);
|
||||
#endif // USB_FAT_DBG_MODE
|
||||
|
||||
usb->vbusPower(vbus_on);
|
||||
#if USB_FAT_DBG_MODE
|
||||
Serial.print(F("USB powered, ms: "));
|
||||
Serial.println(millis() - m);
|
||||
#endif // USB_FAT_DBG_MODE
|
||||
|
||||
while ((millis() - m) < TIMEOUT_MILLIS) {
|
||||
usb->Task();
|
||||
current_state = usb->getUsbTaskState();
|
||||
#if USB_FAT_DBG_MODE
|
||||
if (last_state != current_state) {
|
||||
Serial.print(F("USB state: "));
|
||||
Serial.print(current_state, HEX);
|
||||
Serial.print(F(", ms: "));
|
||||
Serial.println(millis() - m);
|
||||
}
|
||||
last_state = current_state;
|
||||
#endif // USB_FAT_DBG_MODE
|
||||
if(current_state == USB_STATE_RUNNING) {
|
||||
return true;
|
||||
}
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
void setup()
|
||||
{
|
||||
pinMode(MAX_USB_RST, OUTPUT);
|
||||
digitalWrite(MAX_USB_RST, HIGH);
|
||||
|
||||
Serial.begin(9600);
|
||||
|
||||
Serial.print("USB THUMB DRIVE FILE TEST\n\n");
|
||||
|
||||
Serial.print("Initializing The USB Bus\n");
|
||||
|
||||
// Initialize the USB bus.
|
||||
|
||||
if (!initUSB(&usb))
|
||||
{
|
||||
error("initUSB failed");
|
||||
}
|
||||
else
|
||||
{
|
||||
Serial.print("USB Initialized\n");
|
||||
}
|
||||
|
||||
if(bulk.LUNIsGood(0)) {
|
||||
Serial.print("LUN Capacity: ");
|
||||
Serial.println(bulk.GetCapacity(0));
|
||||
|
||||
const uint32_t sectorSize = bulk.GetSectorSize(0);
|
||||
|
||||
Serial.print("Sector Size: ");
|
||||
Serial.println(sectorSize);
|
||||
|
||||
uint8_t buf[512];
|
||||
|
||||
|
||||
const uint8_t lun = 0;
|
||||
const uint32_t addr = 0;
|
||||
if(bulk.Read(lun, addr, sectorSize, 1, buf) == 0) {
|
||||
Serial.print("Read a block: \n");
|
||||
Serial.println((char*)buf);
|
||||
} else {
|
||||
Serial.print("Failed to a read block\n");
|
||||
}
|
||||
|
||||
const char *message = PSTR("This is a test of writing raw data!");
|
||||
strcpy_P(buf, message);
|
||||
|
||||
if(bulk.Write(lun, addr, sectorSize, 1, buf) == 0) {
|
||||
Serial.print("Wrote a block\n");
|
||||
} else {
|
||||
Serial.print("Failed to write a block\n");
|
||||
}
|
||||
} else {
|
||||
Serial.print("LUN zero is not good\n");
|
||||
}
|
||||
}
|
||||
//------------------------------------------------------------------------------
|
||||
void loop () {}
|
||||
@ -0,0 +1,282 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#if !defined(_usb_h_) || defined(__ADDRESS_H__)
|
||||
#error "Never include address.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define __ADDRESS_H__
|
||||
|
||||
|
||||
|
||||
/* NAK powers. To save space in endpoint data structure, amount of retries before giving up and returning 0x4 is stored in */
|
||||
/* bmNakPower as a power of 2. The actual nak_limit is then calculated as nak_limit = ( 2^bmNakPower - 1) */
|
||||
#define USB_NAK_MAX_POWER 15 //NAK binary order maximum value
|
||||
#define USB_NAK_DEFAULT 14 //default 32K-1 NAKs before giving up
|
||||
#define USB_NAK_NOWAIT 1 //Single NAK stops transfer
|
||||
#define USB_NAK_NONAK 0 //Do not count NAKs, stop retrying after USB Timeout
|
||||
|
||||
struct EpInfo {
|
||||
uint8_t epAddr; // Endpoint address
|
||||
uint8_t maxPktSize; // Maximum packet size
|
||||
|
||||
union {
|
||||
uint8_t epAttribs;
|
||||
|
||||
struct {
|
||||
uint8_t bmSndToggle : 1; // Send toggle, when zero bmSNDTOG0, bmSNDTOG1 otherwise
|
||||
uint8_t bmRcvToggle : 1; // Send toggle, when zero bmRCVTOG0, bmRCVTOG1 otherwise
|
||||
uint8_t bmNakPower : 6; // Binary order for NAK_LIMIT value
|
||||
} __attribute__((packed));
|
||||
};
|
||||
} __attribute__((packed));
|
||||
|
||||
// 7 6 5 4 3 2 1 0
|
||||
// ---------------------------------
|
||||
// | | H | P | P | P | A | A | A |
|
||||
// ---------------------------------
|
||||
//
|
||||
// H - if 1 the address is a hub address
|
||||
// P - parent hub address
|
||||
// A - device address / port number in case of hub
|
||||
//
|
||||
|
||||
struct UsbDeviceAddress {
|
||||
|
||||
union {
|
||||
|
||||
struct {
|
||||
uint8_t bmAddress : 3; // device address/port number
|
||||
uint8_t bmParent : 3; // parent hub address
|
||||
uint8_t bmHub : 1; // hub flag
|
||||
uint8_t bmReserved : 1; // reserved, must be zero
|
||||
} __attribute__((packed));
|
||||
uint8_t devAddress;
|
||||
};
|
||||
} __attribute__((packed));
|
||||
|
||||
#define bmUSB_DEV_ADDR_ADDRESS 0x07
|
||||
#define bmUSB_DEV_ADDR_PARENT 0x38
|
||||
#define bmUSB_DEV_ADDR_HUB 0x40
|
||||
|
||||
struct UsbDevice {
|
||||
EpInfo *epinfo; // endpoint info pointer
|
||||
UsbDeviceAddress address;
|
||||
uint8_t epcount; // number of endpoints
|
||||
bool lowspeed; // indicates if a device is the low speed one
|
||||
// uint8_t devclass; // device class
|
||||
} __attribute__((packed));
|
||||
|
||||
class AddressPool {
|
||||
public:
|
||||
virtual UsbDevice* GetUsbDevicePtr(uint8_t addr) = 0;
|
||||
virtual uint8_t AllocAddress(uint8_t parent, bool is_hub = false, uint8_t port = 0) = 0;
|
||||
virtual void FreeAddress(uint8_t addr) = 0;
|
||||
};
|
||||
|
||||
typedef void (*UsbDeviceHandleFunc)(UsbDevice *pdev);
|
||||
|
||||
#define ADDR_ERROR_INVALID_INDEX 0xFF
|
||||
#define ADDR_ERROR_INVALID_ADDRESS 0xFF
|
||||
|
||||
template <const uint8_t MAX_DEVICES_ALLOWED>
|
||||
class AddressPoolImpl : public AddressPool {
|
||||
EpInfo dev0ep; //Endpoint data structure used during enumeration for uninitialized device
|
||||
|
||||
uint8_t hubCounter; // hub counter is kept
|
||||
// in order to avoid hub address duplication
|
||||
|
||||
UsbDevice thePool[MAX_DEVICES_ALLOWED];
|
||||
|
||||
// Initializes address pool entry
|
||||
|
||||
void InitEntry(uint8_t index) {
|
||||
thePool[index].address.devAddress = 0;
|
||||
thePool[index].epcount = 1;
|
||||
thePool[index].lowspeed = 0;
|
||||
thePool[index].epinfo = &dev0ep;
|
||||
};
|
||||
|
||||
// Returns thePool index for a given address
|
||||
|
||||
uint8_t FindAddressIndex(uint8_t address = 0) {
|
||||
for(uint8_t i = 1; i < MAX_DEVICES_ALLOWED; i++) {
|
||||
if(thePool[i].address.devAddress == address)
|
||||
return i;
|
||||
}
|
||||
return 0;
|
||||
};
|
||||
|
||||
// Returns thePool child index for a given parent
|
||||
|
||||
uint8_t FindChildIndex(UsbDeviceAddress addr, uint8_t start = 1) {
|
||||
for(uint8_t i = (start < 1 || start >= MAX_DEVICES_ALLOWED) ? 1 : start; i < MAX_DEVICES_ALLOWED; i++) {
|
||||
if(thePool[i].address.bmParent == addr.bmAddress)
|
||||
return i;
|
||||
}
|
||||
return 0;
|
||||
};
|
||||
|
||||
// Frees address entry specified by index parameter
|
||||
|
||||
void FreeAddressByIndex(uint8_t index) {
|
||||
// Zero field is reserved and should not be affected
|
||||
if(index == 0)
|
||||
return;
|
||||
|
||||
UsbDeviceAddress uda = thePool[index].address;
|
||||
// If a hub was switched off all port addresses should be freed
|
||||
if(uda.bmHub == 1) {
|
||||
for(uint8_t i = 1; (i = FindChildIndex(uda, i));)
|
||||
FreeAddressByIndex(i);
|
||||
|
||||
// If the hub had the last allocated address, hubCounter should be decremented
|
||||
if(hubCounter == uda.bmAddress)
|
||||
hubCounter--;
|
||||
}
|
||||
InitEntry(index);
|
||||
}
|
||||
|
||||
// Initializes the whole address pool at once
|
||||
|
||||
void InitAllAddresses() {
|
||||
for(uint8_t i = 1; i < MAX_DEVICES_ALLOWED; i++)
|
||||
InitEntry(i);
|
||||
|
||||
hubCounter = 0;
|
||||
};
|
||||
|
||||
public:
|
||||
|
||||
AddressPoolImpl() : hubCounter(0) {
|
||||
// Zero address is reserved
|
||||
InitEntry(0);
|
||||
|
||||
thePool[0].address.devAddress = 0;
|
||||
thePool[0].epinfo = &dev0ep;
|
||||
dev0ep.epAddr = 0;
|
||||
dev0ep.maxPktSize = 8;
|
||||
dev0ep.epAttribs = 0; //set DATA0/1 toggles to 0
|
||||
dev0ep.bmNakPower = USB_NAK_MAX_POWER;
|
||||
|
||||
InitAllAddresses();
|
||||
};
|
||||
|
||||
// Returns a pointer to a specified address entry
|
||||
|
||||
virtual UsbDevice* GetUsbDevicePtr(uint8_t addr) {
|
||||
if(!addr)
|
||||
return thePool;
|
||||
|
||||
uint8_t index = FindAddressIndex(addr);
|
||||
|
||||
return (!index) ? NULL : thePool + index;
|
||||
};
|
||||
|
||||
// Performs an operation specified by pfunc for each addressed device
|
||||
|
||||
void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) {
|
||||
if(!pfunc)
|
||||
return;
|
||||
|
||||
for(uint8_t i = 1; i < MAX_DEVICES_ALLOWED; i++)
|
||||
if(thePool[i].address.devAddress)
|
||||
pfunc(thePool + i);
|
||||
};
|
||||
|
||||
// Allocates new address
|
||||
|
||||
virtual uint8_t AllocAddress(uint8_t parent, bool is_hub = false, uint8_t port = 0) {
|
||||
/* if (parent != 0 && port == 0)
|
||||
USB_HOST_SERIAL.println("PRT:0"); */
|
||||
UsbDeviceAddress _parent;
|
||||
_parent.devAddress = parent;
|
||||
if(_parent.bmReserved || port > 7)
|
||||
//if(parent > 127 || port > 7)
|
||||
return 0;
|
||||
|
||||
if(is_hub && hubCounter == 7)
|
||||
return 0;
|
||||
|
||||
// finds first empty address entry starting from one
|
||||
uint8_t index = FindAddressIndex(0);
|
||||
|
||||
if(!index) // if empty entry is not found
|
||||
return 0;
|
||||
|
||||
if(_parent.devAddress == 0) {
|
||||
if(is_hub) {
|
||||
thePool[index].address.devAddress = 0x41;
|
||||
hubCounter++;
|
||||
} else
|
||||
thePool[index].address.devAddress = 1;
|
||||
|
||||
return thePool[index].address.devAddress;
|
||||
}
|
||||
|
||||
UsbDeviceAddress addr;
|
||||
addr.devAddress = 0; // Ensure all bits are zero
|
||||
addr.bmParent = _parent.bmAddress;
|
||||
if(is_hub) {
|
||||
addr.bmHub = 1;
|
||||
addr.bmAddress = ++hubCounter;
|
||||
} else {
|
||||
addr.bmHub = 0;
|
||||
addr.bmAddress = port;
|
||||
}
|
||||
thePool[index].address = addr;
|
||||
/*
|
||||
USB_HOST_SERIAL.print("Addr:");
|
||||
USB_HOST_SERIAL.print(addr.bmHub, HEX);
|
||||
USB_HOST_SERIAL.print(".");
|
||||
USB_HOST_SERIAL.print(addr.bmParent, HEX);
|
||||
USB_HOST_SERIAL.print(".");
|
||||
USB_HOST_SERIAL.println(addr.bmAddress, HEX);
|
||||
*/
|
||||
return thePool[index].address.devAddress;
|
||||
};
|
||||
|
||||
// Empties pool entry
|
||||
|
||||
virtual void FreeAddress(uint8_t addr) {
|
||||
// if the root hub is disconnected all the addresses should be initialized
|
||||
if(addr == 0x41) {
|
||||
InitAllAddresses();
|
||||
return;
|
||||
}
|
||||
uint8_t index = FindAddressIndex(addr);
|
||||
FreeAddressByIndex(index);
|
||||
};
|
||||
|
||||
// Returns number of hubs attached
|
||||
// It can be rather helpfull to find out if there are hubs attached than getting the exact number of hubs.
|
||||
//uint8_t GetNumHubs()
|
||||
//{
|
||||
// return hubCounter;
|
||||
//};
|
||||
//uint8_t GetNumDevices()
|
||||
//{
|
||||
// uint8_t counter = 0;
|
||||
|
||||
// for (uint8_t i=1; i<MAX_DEVICES_ALLOWED; i++)
|
||||
// if (thePool[i].address != 0);
|
||||
// counter ++;
|
||||
|
||||
// return counter;
|
||||
//};
|
||||
};
|
||||
|
||||
#endif // __ADDRESS_H__
|
||||
@ -0,0 +1,1024 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
/* derived from Konstantin Chizhov's AVR port templates */
|
||||
|
||||
#if !defined(_usb_h_) || defined(_avrpins_h_)
|
||||
#error "Never include avrpins.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define _avrpins_h_
|
||||
|
||||
#if defined(__AVR__)
|
||||
|
||||
// pointers are 16 bits on AVR
|
||||
#define pgm_read_pointer(p) pgm_read_word(p)
|
||||
|
||||
// Support for these boards needs to be manually activated in settings.h or in a makefile
|
||||
#if !defined(BOARD_MEGA_ADK) && defined(__AVR_ATmega2560__) && (USE_UHS_MEGA_ADK || defined(ARDUINO_AVR_ADK))
|
||||
#define BOARD_MEGA_ADK
|
||||
#elif !defined(BOARD_BLACK_WIDDOW) && USE_UHS_BLACK_WIDDOW
|
||||
#define BOARD_BLACK_WIDDOW
|
||||
#endif
|
||||
|
||||
#ifdef PORTA
|
||||
#define USE_PORTA
|
||||
#endif
|
||||
#ifdef PORTB
|
||||
#define USE_PORTB
|
||||
#endif
|
||||
#ifdef PORTC
|
||||
#define USE_PORTC
|
||||
#endif
|
||||
#ifdef PORTD
|
||||
#define USE_PORTD
|
||||
#endif
|
||||
#ifdef PORTE
|
||||
#define USE_PORTE
|
||||
#endif
|
||||
#ifdef PORTF
|
||||
#define USE_PORTF
|
||||
#endif
|
||||
#ifdef PORTG
|
||||
#define USE_PORTG
|
||||
#endif
|
||||
#ifdef PORTH
|
||||
#define USE_PORTH
|
||||
#endif
|
||||
#ifdef PORTJ
|
||||
#define USE_PORTJ
|
||||
#endif
|
||||
#ifdef PORTK
|
||||
#define USE_PORTK
|
||||
#endif
|
||||
#ifdef PORTL
|
||||
#define USE_PORTL
|
||||
#endif
|
||||
#ifdef PORTQ
|
||||
#define USE_PORTQ
|
||||
#endif
|
||||
#ifdef PORTR
|
||||
#define USE_PORTR
|
||||
#endif
|
||||
|
||||
#ifdef TCCR0A
|
||||
#define USE_TCCR0A
|
||||
#endif
|
||||
#ifdef TCCR1A
|
||||
#define USE_TCCR1A
|
||||
#endif
|
||||
#ifdef TCCR2A
|
||||
#define USE_TCCR2A
|
||||
#endif
|
||||
|
||||
//Port definitions for AtTiny, AtMega families.
|
||||
|
||||
#define MAKE_PORT(portName, ddrName, pinName, className, ID) \
|
||||
class className{\
|
||||
public:\
|
||||
typedef uint8_t DataT;\
|
||||
public:\
|
||||
static void Write(DataT value){portName = value;}\
|
||||
static void ClearAndSet(DataT clearMask, DataT value){portName = (portName & ~clearMask) | value;}\
|
||||
static DataT Read(){return portName;}\
|
||||
static void DirWrite(DataT value){ddrName = value;}\
|
||||
static DataT DirRead(){return ddrName;}\
|
||||
static void Set(DataT value){portName |= value;}\
|
||||
static void Clear(DataT value){portName &= ~value;}\
|
||||
static void Toggle(DataT value){portName ^= value;}\
|
||||
static void DirSet(DataT value){ddrName |= value;}\
|
||||
static void DirClear(DataT value){ddrName &= ~value;}\
|
||||
static void DirToggle(DataT value){ddrName ^= value;}\
|
||||
static DataT PinRead(){return pinName;}\
|
||||
enum{Id = ID};\
|
||||
enum{Width=sizeof(DataT)*8};\
|
||||
};
|
||||
|
||||
// TCCR registers to set/clear Arduino PWM
|
||||
#define MAKE_TCCR(TccrName, className) \
|
||||
class className{\
|
||||
public:\
|
||||
typedef uint8_t DataT;\
|
||||
public:\
|
||||
static void Write(DataT value){TccrName = value;}\
|
||||
static void ClearAndSet(DataT clearMask, DataT value){TccrName = (TccrName & ~clearMask) | value;}\
|
||||
static DataT Read(){return TccrName;}\
|
||||
static void Set(DataT value){TccrName |= value;}\
|
||||
static void Clear(DataT value){TccrName &= ~value;}\
|
||||
static void Toggle(DataT value){TccrName ^= value;}\
|
||||
enum{Width=sizeof(DataT)*8};\
|
||||
};
|
||||
|
||||
#ifdef USE_PORTA
|
||||
|
||||
MAKE_PORT(PORTA, DDRA, PINA, Porta, 'A')
|
||||
#endif
|
||||
#ifdef USE_PORTB
|
||||
MAKE_PORT(PORTB, DDRB, PINB, Portb, 'B')
|
||||
#endif
|
||||
#ifdef USE_PORTC
|
||||
MAKE_PORT(PORTC, DDRC, PINC, Portc, 'C')
|
||||
#endif
|
||||
#ifdef USE_PORTD
|
||||
MAKE_PORT(PORTD, DDRD, PIND, Portd, 'D')
|
||||
#endif
|
||||
#ifdef USE_PORTE
|
||||
MAKE_PORT(PORTE, DDRE, PINE, Porte, 'E')
|
||||
#endif
|
||||
#ifdef USE_PORTF
|
||||
MAKE_PORT(PORTF, DDRF, PINF, Portf, 'F')
|
||||
#endif
|
||||
#ifdef USE_PORTG
|
||||
MAKE_PORT(PORTG, DDRG, PING, Portg, 'G')
|
||||
#endif
|
||||
#ifdef USE_PORTH
|
||||
MAKE_PORT(PORTH, DDRH, PINH, Porth, 'H')
|
||||
#endif
|
||||
#ifdef USE_PORTJ
|
||||
MAKE_PORT(PORTJ, DDRJ, PINJ, Portj, 'J')
|
||||
#endif
|
||||
#ifdef USE_PORTK
|
||||
MAKE_PORT(PORTK, DDRK, PINK, Portk, 'K')
|
||||
#endif
|
||||
#ifdef USE_PORTL
|
||||
MAKE_PORT(PORTL, DDRL, PINL, Portl, 'L')
|
||||
#endif
|
||||
#ifdef USE_PORTQ
|
||||
MAKE_PORT(PORTQ, DDRQ, PINQ, Portq, 'Q')
|
||||
#endif
|
||||
#ifdef USE_PORTR
|
||||
MAKE_PORT(PORTR, DDRR, PINR, Portr, 'R')
|
||||
#endif
|
||||
|
||||
#ifdef USE_TCCR0A
|
||||
MAKE_TCCR(TCCR0A, Tccr0a)
|
||||
#endif
|
||||
#ifdef USE_TCCR1A
|
||||
MAKE_TCCR(TCCR1A, Tccr1a)
|
||||
#endif
|
||||
#ifdef USE_TCCR2A
|
||||
MAKE_TCCR(TCCR2A, Tccr2a)
|
||||
#endif
|
||||
|
||||
// this class represents one pin in a IO port.
|
||||
// It is fully static.
|
||||
template<typename PORT, uint8_t PIN>
|
||||
class TPin {
|
||||
// BOOST_STATIC_ASSERT(PIN < PORT::Width);
|
||||
public:
|
||||
typedef PORT Port;
|
||||
|
||||
enum {
|
||||
Number = PIN
|
||||
};
|
||||
|
||||
static void Set() {
|
||||
PORT::Set(1 << PIN);
|
||||
}
|
||||
|
||||
static void Set(uint8_t val) {
|
||||
if(val)
|
||||
Set();
|
||||
else Clear();
|
||||
}
|
||||
|
||||
static void SetDir(uint8_t val) {
|
||||
if(val)
|
||||
SetDirWrite();
|
||||
else SetDirRead();
|
||||
}
|
||||
|
||||
static void Clear() {
|
||||
PORT::Clear(1 << PIN);
|
||||
}
|
||||
|
||||
static void Toggle() {
|
||||
PORT::Toggle(1 << PIN);
|
||||
}
|
||||
|
||||
static void SetDirRead() {
|
||||
PORT::DirClear(1 << PIN);
|
||||
}
|
||||
|
||||
static void SetDirWrite() {
|
||||
PORT::DirSet(1 << PIN);
|
||||
}
|
||||
|
||||
static uint8_t IsSet() {
|
||||
return PORT::PinRead() & (uint8_t)(1 << PIN);
|
||||
}
|
||||
|
||||
static void WaiteForSet() {
|
||||
while(IsSet() == 0) {
|
||||
}
|
||||
}
|
||||
|
||||
static void WaiteForClear() {
|
||||
while(IsSet()) {
|
||||
}
|
||||
}
|
||||
}; //class TPin...
|
||||
|
||||
// this class represents one bit in TCCR port.
|
||||
// used to set/clear TCCRx bits
|
||||
// It is fully static.
|
||||
|
||||
template<typename TCCR, uint8_t COM>
|
||||
class TCom {
|
||||
// BOOST_STATIC_ASSERT(PIN < PORT::Width);
|
||||
public:
|
||||
typedef TCCR Tccr;
|
||||
|
||||
enum {
|
||||
Com = COM
|
||||
};
|
||||
|
||||
static void Set() {
|
||||
TCCR::Set(1 << COM);
|
||||
}
|
||||
|
||||
static void Clear() {
|
||||
TCCR::Clear(1 << COM);
|
||||
}
|
||||
|
||||
static void Toggle() {
|
||||
TCCR::Toggle(1 << COM);
|
||||
}
|
||||
}; //class TCom...
|
||||
|
||||
//Short pin definitions
|
||||
#ifdef USE_PORTA
|
||||
typedef TPin<Porta, 0 > Pa0;
|
||||
typedef TPin<Porta, 1 > Pa1;
|
||||
typedef TPin<Porta, 2 > Pa2;
|
||||
typedef TPin<Porta, 3 > Pa3;
|
||||
typedef TPin<Porta, 4 > Pa4;
|
||||
typedef TPin<Porta, 5 > Pa5;
|
||||
typedef TPin<Porta, 6 > Pa6;
|
||||
typedef TPin<Porta, 7 > Pa7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTB
|
||||
typedef TPin<Portb, 0 > Pb0;
|
||||
typedef TPin<Portb, 1 > Pb1;
|
||||
typedef TPin<Portb, 2 > Pb2;
|
||||
typedef TPin<Portb, 3 > Pb3;
|
||||
typedef TPin<Portb, 4 > Pb4;
|
||||
typedef TPin<Portb, 5 > Pb5;
|
||||
typedef TPin<Portb, 6 > Pb6;
|
||||
typedef TPin<Portb, 7 > Pb7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTC
|
||||
typedef TPin<Portc, 0 > Pc0;
|
||||
typedef TPin<Portc, 1 > Pc1;
|
||||
typedef TPin<Portc, 2 > Pc2;
|
||||
typedef TPin<Portc, 3 > Pc3;
|
||||
typedef TPin<Portc, 4 > Pc4;
|
||||
typedef TPin<Portc, 5 > Pc5;
|
||||
typedef TPin<Portc, 6 > Pc6;
|
||||
typedef TPin<Portc, 7 > Pc7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTD
|
||||
typedef TPin<Portd, 0 > Pd0;
|
||||
typedef TPin<Portd, 1 > Pd1;
|
||||
typedef TPin<Portd, 2 > Pd2;
|
||||
typedef TPin<Portd, 3 > Pd3;
|
||||
typedef TPin<Portd, 4 > Pd4;
|
||||
typedef TPin<Portd, 5 > Pd5;
|
||||
typedef TPin<Portd, 6 > Pd6;
|
||||
typedef TPin<Portd, 7 > Pd7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTE
|
||||
typedef TPin<Porte, 0 > Pe0;
|
||||
typedef TPin<Porte, 1 > Pe1;
|
||||
typedef TPin<Porte, 2 > Pe2;
|
||||
typedef TPin<Porte, 3 > Pe3;
|
||||
typedef TPin<Porte, 4 > Pe4;
|
||||
typedef TPin<Porte, 5 > Pe5;
|
||||
typedef TPin<Porte, 6 > Pe6;
|
||||
typedef TPin<Porte, 7 > Pe7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTF
|
||||
typedef TPin<Portf, 0 > Pf0;
|
||||
typedef TPin<Portf, 1 > Pf1;
|
||||
typedef TPin<Portf, 2 > Pf2;
|
||||
typedef TPin<Portf, 3 > Pf3;
|
||||
typedef TPin<Portf, 4 > Pf4;
|
||||
typedef TPin<Portf, 5 > Pf5;
|
||||
typedef TPin<Portf, 6 > Pf6;
|
||||
typedef TPin<Portf, 7 > Pf7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTG
|
||||
typedef TPin<Portg, 0 > Pg0;
|
||||
typedef TPin<Portg, 1 > Pg1;
|
||||
typedef TPin<Portg, 2 > Pg2;
|
||||
typedef TPin<Portg, 3 > Pg3;
|
||||
typedef TPin<Portg, 4 > Pg4;
|
||||
typedef TPin<Portg, 5 > Pg5;
|
||||
typedef TPin<Portg, 6 > Pg6;
|
||||
typedef TPin<Portg, 7 > Pg7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTH
|
||||
typedef TPin<Porth, 0 > Ph0;
|
||||
typedef TPin<Porth, 1 > Ph1;
|
||||
typedef TPin<Porth, 2 > Ph2;
|
||||
typedef TPin<Porth, 3 > Ph3;
|
||||
typedef TPin<Porth, 4 > Ph4;
|
||||
typedef TPin<Porth, 5 > Ph5;
|
||||
typedef TPin<Porth, 6 > Ph6;
|
||||
typedef TPin<Porth, 7 > Ph7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTJ
|
||||
typedef TPin<Portj, 0 > Pj0;
|
||||
typedef TPin<Portj, 1 > Pj1;
|
||||
typedef TPin<Portj, 2 > Pj2;
|
||||
typedef TPin<Portj, 3 > Pj3;
|
||||
typedef TPin<Portj, 4 > Pj4;
|
||||
typedef TPin<Portj, 5 > Pj5;
|
||||
typedef TPin<Portj, 6 > Pj6;
|
||||
typedef TPin<Portj, 7 > Pj7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTK
|
||||
typedef TPin<Portk, 0 > Pk0;
|
||||
typedef TPin<Portk, 1 > Pk1;
|
||||
typedef TPin<Portk, 2 > Pk2;
|
||||
typedef TPin<Portk, 3 > Pk3;
|
||||
typedef TPin<Portk, 4 > Pk4;
|
||||
typedef TPin<Portk, 5 > Pk5;
|
||||
typedef TPin<Portk, 6 > Pk6;
|
||||
typedef TPin<Portk, 7 > Pk7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTL
|
||||
typedef TPin<Portl, 0 > Pl0;
|
||||
typedef TPin<Portl, 1 > Pl1;
|
||||
typedef TPin<Portl, 2 > Pl2;
|
||||
typedef TPin<Portl, 3 > Pl3;
|
||||
typedef TPin<Portl, 4 > Pl4;
|
||||
typedef TPin<Portl, 5 > Pl5;
|
||||
typedef TPin<Portl, 6 > Pl6;
|
||||
typedef TPin<Portl, 7 > Pl7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTQ
|
||||
typedef TPin<Portq, 0 > Pq0;
|
||||
typedef TPin<Portq, 1 > Pq1;
|
||||
typedef TPin<Portq, 2 > Pq2;
|
||||
typedef TPin<Portq, 3 > Pq3;
|
||||
typedef TPin<Portq, 4 > Pq4;
|
||||
typedef TPin<Portq, 5 > Pq5;
|
||||
typedef TPin<Portq, 6 > Pq6;
|
||||
typedef TPin<Portq, 7 > Pq7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_PORTR
|
||||
typedef TPin<Portr, 0 > Pr0;
|
||||
typedef TPin<Portr, 1 > Pr1;
|
||||
typedef TPin<Portr, 2 > Pr2;
|
||||
typedef TPin<Portr, 3 > Pr3;
|
||||
typedef TPin<Portr, 4 > Pr4;
|
||||
typedef TPin<Portr, 5 > Pr5;
|
||||
typedef TPin<Portr, 6 > Pr6;
|
||||
typedef TPin<Portr, 7 > Pr7;
|
||||
#endif
|
||||
|
||||
#ifdef USE_TCCR0A
|
||||
typedef TCom<Tccr0a, COM0A1> Tc0a; //P6
|
||||
typedef TCom<Tccr0a, COM0B1> Tc0b; //P5
|
||||
#endif
|
||||
|
||||
#ifdef USE_TCCR1A
|
||||
typedef TCom<Tccr1a, COM1A1> Tc1a; //P9
|
||||
typedef TCom<Tccr1a, COM1B1> Tc1b; //P10
|
||||
#endif
|
||||
|
||||
#ifdef USE_TCCR2A
|
||||
typedef TCom<Tccr2a, COM2A1> Tc2a; //P11
|
||||
typedef TCom<Tccr2a, COM2B1> Tc2b; //P3
|
||||
#endif
|
||||
|
||||
template<typename Tp_pin, typename Tc_bit>
|
||||
class Tp_Tc {
|
||||
public:
|
||||
|
||||
static void SetDir(uint8_t val) {
|
||||
if(val)
|
||||
SetDirWrite();
|
||||
else SetDirRead();
|
||||
}
|
||||
|
||||
static void SetDirRead() {
|
||||
Tp_pin::SetDirRead(); //set pin direction
|
||||
Tc_bit::Clear(); //disconnect pin from PWM
|
||||
}
|
||||
|
||||
static void SetDirWrite() {
|
||||
Tp_pin::SetDirWrite();
|
||||
Tc_bit::Clear();
|
||||
}
|
||||
};
|
||||
|
||||
/* pin definitions for cases where it's necessary to clear compare output mode bits */
|
||||
|
||||
//typedef Tp_Tc<Pd3, Tc2b> P3; //Arduino pin 3
|
||||
//typedef Tp_Tc<Pd5, Tc0b> P5; //Arduino pin 5
|
||||
//typedef Tp_Tc<Pd6, Tc0a> P6; //Arduino pin 6
|
||||
//typedef Tp_Tc<Pb1, Tc1a> P9; //Arduino pin 9
|
||||
//typedef Tp_Tc<Pb2, Tc1b> P10; //Arduino pin 10
|
||||
//typedef Tp_Tc<Pb3, Tc2a> P11; //Arduino pin 11
|
||||
|
||||
/* Arduino pin definitions */
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
// "Mega" Arduino pin numbers
|
||||
|
||||
#define P0 Pe0
|
||||
#define P1 Pe1
|
||||
#define P2 Pe4
|
||||
#define P3 Pe5
|
||||
#define P4 Pg5
|
||||
#define P5 Pe3
|
||||
#define P6 Ph3
|
||||
#define P7 Ph4
|
||||
|
||||
#define P8 Ph5
|
||||
#define P9 Ph6
|
||||
//#define P10 Pb4 //Pb4 - Regular Arduino
|
||||
#define P10 Pb0 //Pb0 - Einsy Board
|
||||
#define P11 Pb5
|
||||
#define P12 Pb6
|
||||
#define P13 Pb7
|
||||
|
||||
#define P14 Pj1
|
||||
#define P15 Pj0
|
||||
#define P16 Ph1
|
||||
#define P17 Ph0
|
||||
#define P18 Pd3
|
||||
#define P19 Pd2
|
||||
#define P20 Pd1
|
||||
#define P21 Pd0
|
||||
|
||||
#define P22 Pa0
|
||||
#define P23 Pa1
|
||||
#define P24 Pa2
|
||||
#define P25 Pa3
|
||||
#define P26 Pa4
|
||||
#define P27 Pa5
|
||||
#define P28 Pa6
|
||||
#define P29 Pa7
|
||||
#define P30 Pc7
|
||||
#define P31 Pc6
|
||||
#define P32 Pc5
|
||||
#define P33 Pc4
|
||||
#define P34 Pc3
|
||||
#define P35 Pc2
|
||||
#define P36 Pc1
|
||||
#define P37 Pc0
|
||||
|
||||
#define P38 Pd7
|
||||
#define P39 Pg2
|
||||
#define P40 Pg1
|
||||
#define P41 Pg0
|
||||
#define P42 Pl7
|
||||
#define P43 Pl6
|
||||
#define P44 Pl5
|
||||
#define P45 Pl4
|
||||
#define P46 Pl3
|
||||
#define P47 Pl2
|
||||
#define P48 Pl1
|
||||
#define P49 Pl0
|
||||
#define P50 Pb3
|
||||
#define P51 Pb2
|
||||
#define P52 Pb1
|
||||
// #define P53 Pb0
|
||||
|
||||
#ifdef BOARD_MEGA_ADK // These pins are not broken out on the Arduino ADK
|
||||
#define P54 Pe6 // INT on Arduino ADK
|
||||
#define P55 Pj2 // MAX_RESET on Arduino ADK
|
||||
#endif
|
||||
|
||||
// "Mega" pin numbers
|
||||
|
||||
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
|
||||
// "Classic" Arduino pin numbers
|
||||
|
||||
#define P0 Pd0
|
||||
#define P1 Pd1
|
||||
#define P2 Pd2
|
||||
#define P3 Pd3
|
||||
#define P4 Pd4
|
||||
#define P5 Pd5
|
||||
#define P6 Pd6
|
||||
#define P7 Pd7
|
||||
|
||||
#define P8 Pb0
|
||||
#define P9 Pb1
|
||||
#define P10 Pb2
|
||||
#define P11 Pb3
|
||||
#define P12 Pb4
|
||||
#define P13 Pb5
|
||||
|
||||
#define P14 Pc0
|
||||
#define P15 Pc1
|
||||
#define P16 Pc2
|
||||
#define P17 Pc3
|
||||
#define P18 Pc4
|
||||
#define P19 Pc5
|
||||
|
||||
// "Classic" Arduino pin numbers
|
||||
|
||||
#elif defined(CORE_TEENSY) && defined(__AVR_ATmega32U4__)
|
||||
// Teensy 2.0 pin numbers
|
||||
// http://www.pjrc.com/teensy/pinout.html
|
||||
#define P0 Pb0
|
||||
#define P1 Pb1
|
||||
#define P2 Pb2
|
||||
#define P3 Pb3
|
||||
#define P4 Pb7
|
||||
#define P5 Pd0
|
||||
#define P6 Pd1
|
||||
#define P7 Pd2
|
||||
#define P8 Pd3
|
||||
#define P9 Pc6
|
||||
#define P10 Pc7
|
||||
#define P11 Pd6
|
||||
#define P12 Pd7
|
||||
#define P13 Pb4
|
||||
#define P14 Pb5
|
||||
#define P15 Pb6
|
||||
#define P16 Pf7
|
||||
#define P17 Pf6
|
||||
#define P18 Pf5
|
||||
#define P19 Pf4
|
||||
#define P20 Pf1
|
||||
#define P21 Pf0
|
||||
#define P22 Pd4
|
||||
#define P23 Pd5
|
||||
#define P24 Pe6
|
||||
// Teensy 2.0
|
||||
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
// Arduino Leonardo pin numbers
|
||||
|
||||
#define P0 Pd2 // D0 - PD2
|
||||
#define P1 Pd3 // D1 - PD3
|
||||
#define P2 Pd1 // D2 - PD1
|
||||
#define P3 Pd0 // D3 - PD0
|
||||
#define P4 Pd4 // D4 - PD4
|
||||
#define P5 Pc6 // D5 - PC6
|
||||
#define P6 Pd7 // D6 - PD7
|
||||
#define P7 Pe6 // D7 - PE6
|
||||
|
||||
#define P8 Pb4 // D8 - PB4
|
||||
#define P9 Pb5 // D9 - PB5
|
||||
#define P10 Pb6 // D10 - PB6
|
||||
#define P11 Pb7 // D11 - PB7
|
||||
#define P12 Pd6 // D12 - PD6
|
||||
#define P13 Pc7 // D13 - PC7
|
||||
|
||||
#define P14 Pb3 // D14 - MISO - PB3
|
||||
#define P15 Pb1 // D15 - SCK - PB1
|
||||
#define P16 Pb2 // D16 - MOSI - PB2
|
||||
#define P17 Pb0 // D17 - SS - PB0
|
||||
|
||||
#define P18 Pf7 // D18 - A0 - PF7
|
||||
#define P19 Pf6 // D19 - A1 - PF6
|
||||
#define P20 Pf5 // D20 - A2 - PF5
|
||||
#define P21 Pf4 // D21 - A3 - PF4
|
||||
#define P22 Pf1 // D22 - A4 - PF1
|
||||
#define P23 Pf0 // D23 - A5 - PF0
|
||||
|
||||
#define P24 Pd4 // D24 / D4 - A6 - PD4
|
||||
#define P25 Pd7 // D25 / D6 - A7 - PD7
|
||||
#define P26 Pb4 // D26 / D8 - A8 - PB4
|
||||
#define P27 Pb5 // D27 / D9 - A9 - PB5
|
||||
#define P28 Pb6 // D28 / D10 - A10 - PB6
|
||||
#define P29 Pd6 // D29 / D12 - A11 - PD6
|
||||
|
||||
// Arduino Leonardo pin numbers
|
||||
|
||||
#elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
|
||||
// Teensy++ 1.0 and 2.0 pin numbers
|
||||
// http://www.pjrc.com/teensy/pinout.html
|
||||
#define P0 Pd0
|
||||
#define P1 Pd1
|
||||
#define P2 Pd2
|
||||
#define P3 Pd3
|
||||
#define P4 Pd4
|
||||
#define P5 Pd5
|
||||
#define P6 Pd6
|
||||
#define P7 Pd7
|
||||
#define P8 Pe0
|
||||
#define P9 Pe1
|
||||
#define P10 Pc0
|
||||
#define P11 Pc1
|
||||
#define P12 Pc2
|
||||
#define P13 Pc3
|
||||
#define P14 Pc4
|
||||
#define P15 Pc5
|
||||
#define P16 Pc6
|
||||
#define P17 Pc7
|
||||
#define P18 Pe6
|
||||
#define P19 Pe7
|
||||
#define P20 Pb0
|
||||
#define P21 Pb1
|
||||
#define P22 Pb2
|
||||
#define P23 Pb3
|
||||
#define P24 Pb4
|
||||
#define P25 Pb5
|
||||
#define P26 Pb6
|
||||
#define P27 Pb7
|
||||
#define P28 Pa0
|
||||
#define P29 Pa1
|
||||
#define P30 Pa2
|
||||
#define P31 Pa3
|
||||
#define P32 Pa4
|
||||
#define P33 Pa5
|
||||
#define P34 Pa6
|
||||
#define P35 Pa7
|
||||
#define P36 Pe4
|
||||
#define P37 Pe5
|
||||
#define P38 Pf0
|
||||
#define P39 Pf1
|
||||
#define P40 Pf2
|
||||
#define P41 Pf3
|
||||
#define P42 Pf4
|
||||
#define P43 Pf5
|
||||
#define P44 Pf6
|
||||
#define P45 Pf7
|
||||
// Teensy++ 1.0 and 2.0
|
||||
|
||||
#elif defined(ARDUINO_AVR_BALANDUINO) && (defined(__AVR_ATmega644__) || defined(__AVR_ATmega1284P__))
|
||||
// Balanduino pin numbers
|
||||
// http://balanduino.net/
|
||||
#define P0 Pd0 /* 0 - PD0 */
|
||||
#define P1 Pd1 /* 1 - PD1 */
|
||||
|
||||
#if BALANDUINO_REVISION < 13
|
||||
#define P2 Pb2 /* 2 - PB2 */
|
||||
#define P3 Pd6 /* 3 - PD6 */
|
||||
#define P4 Pd7 /* 4 - PD7 */
|
||||
#define P5 Pb3 /* 5 - PB3 */
|
||||
#else
|
||||
#define P2 Pd2 /* 2 - PD2 */
|
||||
#define P3 Pd3 /* 3 - PD3 */
|
||||
#define P4 Pd6 /* 4 - PD6 */
|
||||
#define P5 Pd7 /* 5 - PD7 */
|
||||
#endif
|
||||
|
||||
#define P6 Pb4 /* 6 - PB4 */
|
||||
#define P7 Pa0 /* 7 - PA0 */
|
||||
#define P8 Pa1 /* 8 - PA1 */
|
||||
#define P9 Pa2 /* 9 - PA2 */
|
||||
#define P10 Pa3 /* 10 - PA3 */
|
||||
#define P11 Pa4 /* 11 - PA4 */
|
||||
#define P12 Pa5 /* 12 - PA5 */
|
||||
#define P13 Pc1 /* 13 - PC1 */
|
||||
#define P14 Pc0 /* 14 - PC0 */
|
||||
|
||||
#if BALANDUINO_REVISION < 13
|
||||
#define P15 Pd2 /* 15 - PD2 */
|
||||
#define P16 Pd3 /* 16 - PD3 */
|
||||
#else
|
||||
#define P15 Pb2 /* 15 - PB2 */
|
||||
#define P16 Pb3 /* 16 - PB2 */
|
||||
#endif
|
||||
|
||||
#define P17 Pd4 /* 17 - PD4 */
|
||||
#define P18 Pd5 /* 18 - PD5 */
|
||||
#define P19 Pc2 /* 19 - PC2 */
|
||||
#define P20 Pc3 /* 20 - PC3 */
|
||||
#define P21 Pc4 /* 21 - PC4 */
|
||||
#define P22 Pc5 /* 22 - PC5 */
|
||||
#define P23 Pc6 /* 23 - PC6 */
|
||||
#define P24 Pc7 /* 24 - PC7 */
|
||||
#define P25 Pb0 /* 25 - PB0 */
|
||||
#define P26 Pb1 /* 26 - PB1 */
|
||||
#define P27 Pb5 /* 27 - PB5 */
|
||||
#define P28 Pb6 /* 28 - PB6 */
|
||||
#define P29 Pb7 /* 29 - PB7 */
|
||||
#define P30 Pa6 /* 30 - PA6 */
|
||||
#define P31 Pa7 /* 31 - PA7 */
|
||||
// Balanduino
|
||||
|
||||
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
|
||||
// Sanguino pin numbers
|
||||
// Homepage: http://sanguino.cc/hardware
|
||||
// Hardware add-on: https://github.com/Lauszus/Sanguino
|
||||
#define P0 Pb0
|
||||
#define P1 Pb1
|
||||
#define P2 Pb2
|
||||
#define P3 Pb3
|
||||
#define P4 Pb4
|
||||
#define P5 Pb5
|
||||
#define P6 Pb6
|
||||
#define P7 Pb7
|
||||
#define P8 Pd0
|
||||
#define P9 Pd1
|
||||
#define P10 Pd2
|
||||
#define P11 Pd3
|
||||
#define P12 Pd4
|
||||
#define P13 Pd5
|
||||
#define P14 Pd6
|
||||
#define P15 Pd7
|
||||
#define P16 Pc0
|
||||
#define P17 Pc1
|
||||
#define P18 Pc2
|
||||
#define P19 Pc3
|
||||
#define P20 Pc4
|
||||
#define P21 Pc5
|
||||
#define P22 Pc6
|
||||
#define P23 Pc7
|
||||
#define P24 Pa0
|
||||
#define P25 Pa1
|
||||
#define P26 Pa2
|
||||
#define P27 Pa3
|
||||
#define P28 Pa4
|
||||
#define P29 Pa5
|
||||
#define P30 Pa6
|
||||
#define P31 Pa7
|
||||
// Sanguino
|
||||
|
||||
#else
|
||||
#error "Please define board in avrpins.h"
|
||||
|
||||
#endif // Arduino pin definitions
|
||||
|
||||
#endif // __AVR__
|
||||
|
||||
#if defined(__arm__)
|
||||
|
||||
// pointers are 32 bits on ARM
|
||||
#define pgm_read_pointer(p) pgm_read_dword(p)
|
||||
|
||||
#if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__))
|
||||
|
||||
#include "core_pins.h"
|
||||
#include "avr_emulation.h"
|
||||
|
||||
#define GPIO_BITBAND_ADDR(reg, bit) (((uint32_t)&(reg) - 0x40000000) * 32 + (bit) * 4 + 0x42000000)
|
||||
#define GPIO_BITBAND_PTR(reg, bit) ((uint8_t *)GPIO_BITBAND_ADDR((reg), (bit)))
|
||||
|
||||
#define MAKE_PIN(className, baseReg, pinNum, configReg) \
|
||||
class className { \
|
||||
public: \
|
||||
static void Set() { \
|
||||
*GPIO_BITBAND_PTR(baseReg, pinNum) = 1; \
|
||||
} \
|
||||
static void Clear() { \
|
||||
*GPIO_BITBAND_PTR(baseReg, pinNum) = 0; \
|
||||
} \
|
||||
static void SetDirRead() { \
|
||||
configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \
|
||||
*(GPIO_BITBAND_PTR(baseReg, pinNum) + 640) = 0; \
|
||||
} \
|
||||
static void SetDirWrite() { \
|
||||
configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \
|
||||
*(GPIO_BITBAND_PTR(baseReg, pinNum) + 640) = 1; \
|
||||
} \
|
||||
static uint8_t IsSet() { \
|
||||
return *(GPIO_BITBAND_PTR(baseReg, pinNum) + 512); \
|
||||
} \
|
||||
};
|
||||
|
||||
MAKE_PIN(P0, CORE_PIN0_PORTREG, CORE_PIN0_BIT, CORE_PIN0_CONFIG);
|
||||
MAKE_PIN(P1, CORE_PIN1_PORTREG, CORE_PIN1_BIT, CORE_PIN1_CONFIG);
|
||||
MAKE_PIN(P2, CORE_PIN2_PORTREG, CORE_PIN2_BIT, CORE_PIN2_CONFIG);
|
||||
MAKE_PIN(P3, CORE_PIN3_PORTREG, CORE_PIN3_BIT, CORE_PIN3_CONFIG);
|
||||
MAKE_PIN(P4, CORE_PIN4_PORTREG, CORE_PIN4_BIT, CORE_PIN4_CONFIG);
|
||||
MAKE_PIN(P5, CORE_PIN5_PORTREG, CORE_PIN5_BIT, CORE_PIN5_CONFIG);
|
||||
MAKE_PIN(P6, CORE_PIN6_PORTREG, CORE_PIN6_BIT, CORE_PIN6_CONFIG);
|
||||
MAKE_PIN(P7, CORE_PIN7_PORTREG, CORE_PIN7_BIT, CORE_PIN7_CONFIG);
|
||||
MAKE_PIN(P8, CORE_PIN8_PORTREG, CORE_PIN8_BIT, CORE_PIN8_CONFIG);
|
||||
MAKE_PIN(P9, CORE_PIN9_PORTREG, CORE_PIN9_BIT, CORE_PIN9_CONFIG);
|
||||
MAKE_PIN(P10, CORE_PIN10_PORTREG, CORE_PIN10_BIT, CORE_PIN10_CONFIG);
|
||||
MAKE_PIN(P11, CORE_PIN11_PORTREG, CORE_PIN11_BIT, CORE_PIN11_CONFIG);
|
||||
MAKE_PIN(P12, CORE_PIN12_PORTREG, CORE_PIN12_BIT, CORE_PIN12_CONFIG);
|
||||
MAKE_PIN(P13, CORE_PIN13_PORTREG, CORE_PIN13_BIT, CORE_PIN13_CONFIG);
|
||||
MAKE_PIN(P14, CORE_PIN14_PORTREG, CORE_PIN14_BIT, CORE_PIN14_CONFIG);
|
||||
MAKE_PIN(P15, CORE_PIN15_PORTREG, CORE_PIN15_BIT, CORE_PIN15_CONFIG);
|
||||
MAKE_PIN(P16, CORE_PIN16_PORTREG, CORE_PIN16_BIT, CORE_PIN16_CONFIG);
|
||||
MAKE_PIN(P17, CORE_PIN17_PORTREG, CORE_PIN17_BIT, CORE_PIN17_CONFIG);
|
||||
MAKE_PIN(P18, CORE_PIN18_PORTREG, CORE_PIN18_BIT, CORE_PIN18_CONFIG);
|
||||
MAKE_PIN(P19, CORE_PIN19_PORTREG, CORE_PIN19_BIT, CORE_PIN19_CONFIG);
|
||||
MAKE_PIN(P20, CORE_PIN20_PORTREG, CORE_PIN20_BIT, CORE_PIN20_CONFIG);
|
||||
MAKE_PIN(P21, CORE_PIN21_PORTREG, CORE_PIN21_BIT, CORE_PIN21_CONFIG);
|
||||
MAKE_PIN(P22, CORE_PIN22_PORTREG, CORE_PIN22_BIT, CORE_PIN22_CONFIG);
|
||||
MAKE_PIN(P23, CORE_PIN23_PORTREG, CORE_PIN23_BIT, CORE_PIN23_CONFIG);
|
||||
MAKE_PIN(P24, CORE_PIN24_PORTREG, CORE_PIN24_BIT, CORE_PIN24_CONFIG);
|
||||
MAKE_PIN(P25, CORE_PIN25_PORTREG, CORE_PIN25_BIT, CORE_PIN25_CONFIG);
|
||||
MAKE_PIN(P26, CORE_PIN26_PORTREG, CORE_PIN26_BIT, CORE_PIN26_CONFIG);
|
||||
MAKE_PIN(P27, CORE_PIN27_PORTREG, CORE_PIN27_BIT, CORE_PIN27_CONFIG);
|
||||
MAKE_PIN(P28, CORE_PIN28_PORTREG, CORE_PIN28_BIT, CORE_PIN28_CONFIG);
|
||||
MAKE_PIN(P29, CORE_PIN29_PORTREG, CORE_PIN29_BIT, CORE_PIN29_CONFIG);
|
||||
MAKE_PIN(P30, CORE_PIN30_PORTREG, CORE_PIN30_BIT, CORE_PIN30_CONFIG);
|
||||
MAKE_PIN(P31, CORE_PIN31_PORTREG, CORE_PIN31_BIT, CORE_PIN31_CONFIG);
|
||||
MAKE_PIN(P32, CORE_PIN32_PORTREG, CORE_PIN32_BIT, CORE_PIN32_CONFIG);
|
||||
MAKE_PIN(P33, CORE_PIN33_PORTREG, CORE_PIN33_BIT, CORE_PIN33_CONFIG);
|
||||
|
||||
#undef MAKE_PIN
|
||||
|
||||
#elif defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)
|
||||
|
||||
// SetDirRead:
|
||||
// Disable interrupts
|
||||
// Disable the pull up resistor
|
||||
// Set to INPUT
|
||||
// Enable PIO
|
||||
|
||||
// SetDirWrite:
|
||||
// Disable interrupts
|
||||
// Disable the pull up resistor
|
||||
// Set to OUTPUT
|
||||
// Enable PIO
|
||||
|
||||
#define MAKE_PIN(className, pio, pinMask) \
|
||||
class className { \
|
||||
public: \
|
||||
static void Set() { \
|
||||
pio->PIO_SODR = pinMask; \
|
||||
} \
|
||||
static void Clear() { \
|
||||
pio->PIO_CODR = pinMask; \
|
||||
} \
|
||||
static void SetDirRead() { \
|
||||
pio->PIO_IDR = pinMask ; \
|
||||
pio->PIO_PUDR = pinMask; \
|
||||
pio->PIO_ODR = pinMask; \
|
||||
pio->PIO_PER = pinMask; \
|
||||
} \
|
||||
static void SetDirWrite() { \
|
||||
pio->PIO_IDR = pinMask ; \
|
||||
pio->PIO_PUDR = pinMask; \
|
||||
pio->PIO_OER = pinMask; \
|
||||
pio->PIO_PER = pinMask; \
|
||||
} \
|
||||
static uint8_t IsSet() { \
|
||||
return pio->PIO_PDSR & pinMask; \
|
||||
} \
|
||||
};
|
||||
|
||||
// See: http://arduino.cc/en/Hacking/PinMappingSAM3X and variant.cpp
|
||||
|
||||
MAKE_PIN(P0, PIOA, PIO_PA8);
|
||||
MAKE_PIN(P1, PIOA, PIO_PA9);
|
||||
MAKE_PIN(P2, PIOB, PIO_PB25);
|
||||
MAKE_PIN(P3, PIOC, PIO_PC28);
|
||||
MAKE_PIN(P4, PIOC, PIO_PC26);
|
||||
MAKE_PIN(P5, PIOC, PIO_PC25);
|
||||
MAKE_PIN(P6, PIOC, PIO_PC24);
|
||||
MAKE_PIN(P7, PIOC, PIO_PC23);
|
||||
MAKE_PIN(P8, PIOC, PIO_PC22);
|
||||
MAKE_PIN(P9, PIOC, PIO_PC21);
|
||||
MAKE_PIN(P10, PIOC, PIO_PC29);
|
||||
MAKE_PIN(P11, PIOD, PIO_PD7);
|
||||
MAKE_PIN(P12, PIOD, PIO_PD8);
|
||||
MAKE_PIN(P13, PIOB, PIO_PB27);
|
||||
MAKE_PIN(P14, PIOD, PIO_PD4);
|
||||
MAKE_PIN(P15, PIOD, PIO_PD5);
|
||||
MAKE_PIN(P16, PIOA, PIO_PA13);
|
||||
MAKE_PIN(P17, PIOA, PIO_PA12);
|
||||
MAKE_PIN(P18, PIOA, PIO_PA11);
|
||||
MAKE_PIN(P19, PIOA, PIO_PA10);
|
||||
MAKE_PIN(P20, PIOB, PIO_PB12);
|
||||
MAKE_PIN(P21, PIOB, PIO_PB13);
|
||||
MAKE_PIN(P22, PIOB, PIO_PB26);
|
||||
MAKE_PIN(P23, PIOA, PIO_PA14);
|
||||
MAKE_PIN(P24, PIOA, PIO_PA15);
|
||||
MAKE_PIN(P25, PIOD, PIO_PD0);
|
||||
MAKE_PIN(P26, PIOD, PIO_PD1);
|
||||
MAKE_PIN(P27, PIOD, PIO_PD2);
|
||||
MAKE_PIN(P28, PIOD, PIO_PD3);
|
||||
MAKE_PIN(P29, PIOD, PIO_PD6);
|
||||
MAKE_PIN(P30, PIOD, PIO_PD9);
|
||||
MAKE_PIN(P31, PIOA, PIO_PA7);
|
||||
MAKE_PIN(P32, PIOD, PIO_PD10);
|
||||
MAKE_PIN(P33, PIOC, PIO_PC1);
|
||||
MAKE_PIN(P34, PIOC, PIO_PC2);
|
||||
MAKE_PIN(P35, PIOC, PIO_PC3);
|
||||
MAKE_PIN(P36, PIOC, PIO_PC4);
|
||||
MAKE_PIN(P37, PIOC, PIO_PC5);
|
||||
MAKE_PIN(P38, PIOC, PIO_PC6);
|
||||
MAKE_PIN(P39, PIOC, PIO_PC7);
|
||||
MAKE_PIN(P40, PIOC, PIO_PC8);
|
||||
MAKE_PIN(P41, PIOC, PIO_PC9);
|
||||
MAKE_PIN(P42, PIOA, PIO_PA19);
|
||||
MAKE_PIN(P43, PIOA, PIO_PA20);
|
||||
MAKE_PIN(P44, PIOC, PIO_PC19);
|
||||
MAKE_PIN(P45, PIOC, PIO_PC18);
|
||||
MAKE_PIN(P46, PIOC, PIO_PC17);
|
||||
MAKE_PIN(P47, PIOC, PIO_PC16);
|
||||
MAKE_PIN(P48, PIOC, PIO_PC15);
|
||||
MAKE_PIN(P49, PIOC, PIO_PC14);
|
||||
MAKE_PIN(P50, PIOC, PIO_PC13);
|
||||
MAKE_PIN(P51, PIOC, PIO_PC12);
|
||||
MAKE_PIN(P52, PIOB, PIO_PB21);
|
||||
MAKE_PIN(P53, PIOB, PIO_PB14);
|
||||
MAKE_PIN(P54, PIOA, PIO_PA16);
|
||||
MAKE_PIN(P55, PIOA, PIO_PA24);
|
||||
MAKE_PIN(P56, PIOA, PIO_PA23);
|
||||
MAKE_PIN(P57, PIOA, PIO_PA22);
|
||||
MAKE_PIN(P58, PIOA, PIO_PA6);
|
||||
MAKE_PIN(P59, PIOA, PIO_PA4);
|
||||
MAKE_PIN(P60, PIOA, PIO_PA3);
|
||||
MAKE_PIN(P61, PIOA, PIO_PA2);
|
||||
MAKE_PIN(P62, PIOB, PIO_PB17);
|
||||
MAKE_PIN(P63, PIOB, PIO_PB18);
|
||||
MAKE_PIN(P64, PIOB, PIO_PB19);
|
||||
MAKE_PIN(P65, PIOB, PIO_PB20);
|
||||
MAKE_PIN(P66, PIOB, PIO_PB15);
|
||||
MAKE_PIN(P67, PIOB, PIO_PB16);
|
||||
MAKE_PIN(P68, PIOA, PIO_PA1);
|
||||
MAKE_PIN(P69, PIOA, PIO_PA0);
|
||||
MAKE_PIN(P70, PIOA, PIO_PA17);
|
||||
MAKE_PIN(P71, PIOA, PIO_PA18);
|
||||
MAKE_PIN(P72, PIOC, PIO_PC30);
|
||||
MAKE_PIN(P73, PIOA, PIO_PA21);
|
||||
MAKE_PIN(P74, PIOA, PIO_PA25); // MISO
|
||||
MAKE_PIN(P75, PIOA, PIO_PA26); // MOSI
|
||||
MAKE_PIN(P76, PIOA, PIO_PA27); // CLK
|
||||
MAKE_PIN(P77, PIOA, PIO_PA28);
|
||||
MAKE_PIN(P78, PIOB, PIO_PB23); // Unconnected
|
||||
|
||||
#undef MAKE_PIN
|
||||
|
||||
#elif defined(RBL_NRF51822)
|
||||
|
||||
#define MAKE_PIN(className, pin) \
|
||||
class className { \
|
||||
public: \
|
||||
static void Set() { \
|
||||
nrf_gpio_pin_set(pin); \
|
||||
} \
|
||||
static void Clear() { \
|
||||
nrf_gpio_pin_clear(pin); \
|
||||
} \
|
||||
static void SetDirRead() { \
|
||||
nrf_gpio_cfg_input(pin, NRF_GPIO_PIN_NOPULL); \
|
||||
} \
|
||||
static void SetDirWrite() { \
|
||||
nrf_gpio_cfg_output(pin); \
|
||||
} \
|
||||
static uint8_t IsSet() { \
|
||||
return (uint8_t)nrf_gpio_pin_read(pin); \
|
||||
} \
|
||||
};
|
||||
|
||||
// See: pin_transform.c in RBL nRF51822 SDK
|
||||
MAKE_PIN(P0, Pin_nRF51822_to_Arduino(D0));
|
||||
MAKE_PIN(P1, Pin_nRF51822_to_Arduino(D1));
|
||||
MAKE_PIN(P2, Pin_nRF51822_to_Arduino(D2));
|
||||
MAKE_PIN(P3, Pin_nRF51822_to_Arduino(D3));
|
||||
MAKE_PIN(P4, Pin_nRF51822_to_Arduino(D4));
|
||||
MAKE_PIN(P5, Pin_nRF51822_to_Arduino(D5));
|
||||
MAKE_PIN(P6, Pin_nRF51822_to_Arduino(D6));
|
||||
MAKE_PIN(P7, Pin_nRF51822_to_Arduino(D7));
|
||||
MAKE_PIN(P8, Pin_nRF51822_to_Arduino(D8));
|
||||
MAKE_PIN(P9, Pin_nRF51822_to_Arduino(D9)); // INT
|
||||
MAKE_PIN(P10, Pin_nRF51822_to_Arduino(D10)); // SS
|
||||
MAKE_PIN(P11, Pin_nRF51822_to_Arduino(D11));
|
||||
MAKE_PIN(P12, Pin_nRF51822_to_Arduino(D12));
|
||||
MAKE_PIN(P13, Pin_nRF51822_to_Arduino(D13));
|
||||
MAKE_PIN(P14, Pin_nRF51822_to_Arduino(D14));
|
||||
MAKE_PIN(P15, Pin_nRF51822_to_Arduino(D15));
|
||||
MAKE_PIN(P17, Pin_nRF51822_to_Arduino(D17)); // MISO
|
||||
MAKE_PIN(P18, Pin_nRF51822_to_Arduino(D18)); // MOSI
|
||||
MAKE_PIN(P16, Pin_nRF51822_to_Arduino(D16)); // CLK
|
||||
MAKE_PIN(P19, Pin_nRF51822_to_Arduino(D19));
|
||||
MAKE_PIN(P20, Pin_nRF51822_to_Arduino(D20));
|
||||
MAKE_PIN(P21, Pin_nRF51822_to_Arduino(D21));
|
||||
MAKE_PIN(P22, Pin_nRF51822_to_Arduino(D22));
|
||||
MAKE_PIN(P23, Pin_nRF51822_to_Arduino(D23));
|
||||
MAKE_PIN(P24, Pin_nRF51822_to_Arduino(D24));
|
||||
|
||||
#undef MAKE_PIN
|
||||
|
||||
|
||||
#else
|
||||
#error "Please define board in avrpins.h"
|
||||
|
||||
#endif
|
||||
|
||||
#endif // __arm__
|
||||
|
||||
#endif //_avrpins_h_
|
||||
@ -0,0 +1,217 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
#if !defined(_usb_h_) || defined(__CONFDESCPARSER_H__)
|
||||
#error "Never include confdescparser.h directly; include Usb.h instead"
|
||||
#else
|
||||
|
||||
#define __CONFDESCPARSER_H__
|
||||
|
||||
class UsbConfigXtracter {
|
||||
public:
|
||||
//virtual void ConfigXtract(const USB_CONFIGURATION_DESCRIPTOR *conf) = 0;
|
||||
//virtual void InterfaceXtract(uint8_t conf, const USB_INTERFACE_DESCRIPTOR *iface) = 0;
|
||||
virtual void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep) = 0;
|
||||
};
|
||||
|
||||
#define CP_MASK_COMPARE_CLASS 1
|
||||
#define CP_MASK_COMPARE_SUBCLASS 2
|
||||
#define CP_MASK_COMPARE_PROTOCOL 4
|
||||
#define CP_MASK_COMPARE_ALL 7
|
||||
|
||||
// Configuration Descriptor Parser Class Template
|
||||
|
||||
template <const uint8_t CLASS_ID, const uint8_t SUBCLASS_ID, const uint8_t PROTOCOL_ID, const uint8_t MASK>
|
||||
class ConfigDescParser : public USBReadParser {
|
||||
UsbConfigXtracter *theXtractor;
|
||||
MultiValueBuffer theBuffer;
|
||||
MultiByteValueParser valParser;
|
||||
ByteSkipper theSkipper;
|
||||
uint8_t varBuffer[16 /*sizeof(USB_CONFIGURATION_DESCRIPTOR)*/];
|
||||
|
||||
uint8_t stateParseDescr; // ParseDescriptor state
|
||||
|
||||
uint8_t dscrLen; // Descriptor length
|
||||
uint8_t dscrType; // Descriptor type
|
||||
|
||||
bool isGoodInterface; // Apropriate interface flag
|
||||
uint8_t confValue; // Configuration value
|
||||
uint8_t protoValue; // Protocol value
|
||||
uint8_t ifaceNumber; // Interface number
|
||||
uint8_t ifaceAltSet; // Interface alternate settings
|
||||
|
||||
bool UseOr;
|
||||
bool ParseDescriptor(uint8_t **pp, uint16_t *pcntdn);
|
||||
void PrintHidDescriptor(const USB_HID_DESCRIPTOR *pDesc);
|
||||
|
||||
public:
|
||||
|
||||
void SetOR(void) {
|
||||
UseOr = true;
|
||||
}
|
||||
ConfigDescParser(UsbConfigXtracter *xtractor);
|
||||
virtual void Parse(const uint16_t len, const uint8_t *pbuf, const uint16_t &offset);
|
||||
};
|
||||
|
||||
template <const uint8_t CLASS_ID, const uint8_t SUBCLASS_ID, const uint8_t PROTOCOL_ID, const uint8_t MASK>
|
||||
ConfigDescParser<CLASS_ID, SUBCLASS_ID, PROTOCOL_ID, MASK>::ConfigDescParser(UsbConfigXtracter *xtractor) :
|
||||
theXtractor(xtractor),
|
||||
stateParseDescr(0),
|
||||
dscrLen(0),
|
||||
dscrType(0),
|
||||
UseOr(false) {
|
||||
theBuffer.pValue = varBuffer;
|
||||
valParser.Initialize(&theBuffer);
|
||||
theSkipper.Initialize(&theBuffer);
|
||||
};
|
||||
|
||||
template <const uint8_t CLASS_ID, const uint8_t SUBCLASS_ID, const uint8_t PROTOCOL_ID, const uint8_t MASK>
|
||||
void ConfigDescParser<CLASS_ID, SUBCLASS_ID, PROTOCOL_ID, MASK>::Parse(const uint16_t len, const uint8_t *pbuf, const uint16_t &offset) {
|
||||
uint16_t cntdn = (uint16_t)len;
|
||||
uint8_t *p = (uint8_t*)pbuf;
|
||||
|
||||
while(cntdn)
|
||||
if(!ParseDescriptor(&p, &cntdn))
|
||||
return;
|
||||
}
|
||||
|
||||
/* Parser for the configuration descriptor. Takes values for class, subclass, protocol fields in interface descriptor and
|
||||
compare masks for them. When the match is found, calls EndpointXtract passing buffer containing endpoint descriptor */
|
||||
template <const uint8_t CLASS_ID, const uint8_t SUBCLASS_ID, const uint8_t PROTOCOL_ID, const uint8_t MASK>
|
||||
bool ConfigDescParser<CLASS_ID, SUBCLASS_ID, PROTOCOL_ID, MASK>::ParseDescriptor(uint8_t **pp, uint16_t *pcntdn) {
|
||||
USB_CONFIGURATION_DESCRIPTOR* ucd = reinterpret_cast<USB_CONFIGURATION_DESCRIPTOR*>(varBuffer);
|
||||
USB_INTERFACE_DESCRIPTOR* uid = reinterpret_cast<USB_INTERFACE_DESCRIPTOR*>(varBuffer);
|
||||
switch(stateParseDescr) {
|
||||
case 0:
|
||||
theBuffer.valueSize = 2;
|
||||
valParser.Initialize(&theBuffer);
|
||||
stateParseDescr = 1;
|
||||
case 1:
|
||||
if(!valParser.Parse(pp, pcntdn))
|
||||
return false;
|
||||
dscrLen = *((uint8_t*)theBuffer.pValue);
|
||||
dscrType = *((uint8_t*)theBuffer.pValue + 1);
|
||||
stateParseDescr = 2;
|
||||
case 2:
|
||||
// This is a sort of hack. Assuming that two bytes are all ready in the buffer
|
||||
// the pointer is positioned two bytes ahead in order for the rest of descriptor
|
||||
// to be read right after the size and the type fields.
|
||||
// This should be used carefully. varBuffer should be used directly to handle data
|
||||
// in the buffer.
|
||||
theBuffer.pValue = varBuffer + 2;
|
||||
stateParseDescr = 3;
|
||||
case 3:
|
||||
switch(dscrType) {
|
||||
case USB_DESCRIPTOR_INTERFACE:
|
||||
isGoodInterface = false;
|
||||
case USB_DESCRIPTOR_CONFIGURATION:
|
||||
theBuffer.valueSize = sizeof (USB_CONFIGURATION_DESCRIPTOR) - 2;
|
||||
break;
|
||||
case USB_DESCRIPTOR_ENDPOINT:
|
||||
theBuffer.valueSize = sizeof (USB_ENDPOINT_DESCRIPTOR) - 2;
|
||||
break;
|
||||
case HID_DESCRIPTOR_HID:
|
||||
theBuffer.valueSize = dscrLen - 2;
|
||||
break;
|
||||
}
|
||||
valParser.Initialize(&theBuffer);
|
||||
stateParseDescr = 4;
|
||||
case 4:
|
||||
switch(dscrType) {
|
||||
case USB_DESCRIPTOR_CONFIGURATION:
|
||||
if(!valParser.Parse(pp, pcntdn))
|
||||
return false;
|
||||
confValue = ucd->bConfigurationValue;
|
||||
break;
|
||||
case USB_DESCRIPTOR_INTERFACE:
|
||||
if(!valParser.Parse(pp, pcntdn))
|
||||
return false;
|
||||
if((MASK & CP_MASK_COMPARE_CLASS) && uid->bInterfaceClass != CLASS_ID)
|
||||
break;
|
||||
if((MASK & CP_MASK_COMPARE_SUBCLASS) && uid->bInterfaceSubClass != SUBCLASS_ID)
|
||||
break;
|
||||
if(UseOr) {
|
||||
if((!((MASK & CP_MASK_COMPARE_PROTOCOL) && uid->bInterfaceProtocol)))
|
||||
break;
|
||||
} else {
|
||||
if((MASK & CP_MASK_COMPARE_PROTOCOL) && uid->bInterfaceProtocol != PROTOCOL_ID)
|
||||
break;
|
||||
}
|
||||
isGoodInterface = true;
|
||||
ifaceNumber = uid->bInterfaceNumber;
|
||||
ifaceAltSet = uid->bAlternateSetting;
|
||||
protoValue = uid->bInterfaceProtocol;
|
||||
break;
|
||||
case USB_DESCRIPTOR_ENDPOINT:
|
||||
if(!valParser.Parse(pp, pcntdn))
|
||||
return false;
|
||||
if(isGoodInterface)
|
||||
if(theXtractor)
|
||||
theXtractor->EndpointXtract(confValue, ifaceNumber, ifaceAltSet, protoValue, (USB_ENDPOINT_DESCRIPTOR*)varBuffer);
|
||||
break;
|
||||
//case HID_DESCRIPTOR_HID:
|
||||
// if (!valParser.Parse(pp, pcntdn))
|
||||
// return false;
|
||||
// PrintHidDescriptor((const USB_HID_DESCRIPTOR*)varBuffer);
|
||||
// break;
|
||||
default:
|
||||
if(!theSkipper.Skip(pp, pcntdn, dscrLen - 2))
|
||||
return false;
|
||||
}
|
||||
theBuffer.pValue = varBuffer;
|
||||
stateParseDescr = 0;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
template <const uint8_t CLASS_ID, const uint8_t SUBCLASS_ID, const uint8_t PROTOCOL_ID, const uint8_t MASK>
|
||||
void ConfigDescParser<CLASS_ID, SUBCLASS_ID, PROTOCOL_ID, MASK>::PrintHidDescriptor(const USB_HID_DESCRIPTOR *pDesc) {
|
||||
Notify(PSTR("\r\n\r\nHID Descriptor:\r\n"), 0x80);
|
||||
Notify(PSTR("bDescLength:\t\t"), 0x80);
|
||||
PrintHex<uint8_t > (pDesc->bLength, 0x80);
|
||||
|
||||
Notify(PSTR("\r\nbDescriptorType:\t"), 0x80);
|
||||
PrintHex<uint8_t > (pDesc->bDescriptorType, 0x80);
|
||||
|
||||
Notify(PSTR("\r\nbcdHID:\t\t\t"), 0x80);
|
||||
PrintHex<uint16_t > (pDesc->bcdHID, 0x80);
|
||||
|
||||
Notify(PSTR("\r\nbCountryCode:\t\t"), 0x80);
|
||||
PrintHex<uint8_t > (pDesc->bCountryCode, 0x80);
|
||||
|
||||
Notify(PSTR("\r\nbNumDescriptors:\t"), 0x80);
|
||||
PrintHex<uint8_t > (pDesc->bNumDescriptors, 0x80);
|
||||
|
||||
//Notify(PSTR("\r\nbDescrType:\t\t"));
|
||||
//PrintHex<uint8_t>(pDesc->bDescrType);
|
||||
//
|
||||
//Notify(PSTR("\r\nwDescriptorLength:\t"));
|
||||
//PrintHex<uint16_t>(pDesc->wDescriptorLength);
|
||||
|
||||
for(uint8_t i = 0; i < pDesc->bNumDescriptors; i++) {
|
||||
HID_CLASS_DESCRIPTOR_LEN_AND_TYPE *pLT = (HID_CLASS_DESCRIPTOR_LEN_AND_TYPE*)&(pDesc->bDescrType);
|
||||
|
||||
Notify(PSTR("\r\nbDescrType:\t\t"), 0x80);
|
||||
PrintHex<uint8_t > (pLT[i].bDescrType, 0x80);
|
||||
|
||||
Notify(PSTR("\r\nwDescriptorLength:\t"), 0x80);
|
||||
PrintHex<uint16_t > (pLT[i].wDescriptorLength, 0x80);
|
||||
}
|
||||
Notify(PSTR("\r\n"), 0x80);
|
||||
}
|
||||
|
||||
|
||||
#endif // __CONFDESCPARSER_H__
|
||||
@ -0,0 +1,361 @@
|
||||
####################################################
|
||||
# Syntax Coloring Map For USB Library
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
USB KEYWORD1
|
||||
USBHub KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Syntax Coloring Map For BTD (Bluetooth) Library
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
BTD KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
####################################################
|
||||
Task KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Syntax Coloring Map For PS3/PS4 Bluetooth/USB Library
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
PS3BT KEYWORD1
|
||||
PS3USB KEYWORD1
|
||||
PS4BT KEYWORD1
|
||||
PS4USB KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
####################################################
|
||||
setBdaddr KEYWORD2
|
||||
getBdaddr KEYWORD2
|
||||
setMoveBdaddr KEYWORD2
|
||||
getMoveBdaddr KEYWORD2
|
||||
getMoveCalibration KEYWORD2
|
||||
|
||||
getButtonPress KEYWORD2
|
||||
getButtonClick KEYWORD2
|
||||
getAnalogButton KEYWORD2
|
||||
getAnalogHat KEYWORD2
|
||||
getSensor KEYWORD2
|
||||
getAngle KEYWORD2
|
||||
get9DOFValues KEYWORD2
|
||||
getStatus KEYWORD2
|
||||
printStatusString KEYWORD2
|
||||
getTemperature KEYWORD2
|
||||
disconnect KEYWORD2
|
||||
|
||||
setAllOff KEYWORD2
|
||||
setRumbleOff KEYWORD2
|
||||
setRumbleOn KEYWORD2
|
||||
setLedOff KEYWORD2
|
||||
setLedOn KEYWORD2
|
||||
setLedToggle KEYWORD2
|
||||
setLedFlash KEYWORD2
|
||||
moveSetBulb KEYWORD2
|
||||
moveSetRumble KEYWORD2
|
||||
|
||||
attachOnInit KEYWORD2
|
||||
|
||||
PS3Connected KEYWORD2
|
||||
PS3MoveConnected KEYWORD2
|
||||
PS3NavigationConnected KEYWORD2
|
||||
|
||||
isReady KEYWORD2
|
||||
watingForConnection KEYWORD2
|
||||
|
||||
isTouching KEYWORD2
|
||||
getX KEYWORD2
|
||||
getY KEYWORD2
|
||||
getTouchCounter KEYWORD2
|
||||
|
||||
getUsbStatus KEYWORD2
|
||||
getAudioStatus KEYWORD2
|
||||
getMicStatus KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Constants and enums (LITERAL1)
|
||||
####################################################
|
||||
OFF LITERAL1
|
||||
LED1 LITERAL1
|
||||
LED2 LITERAL1
|
||||
LED3 LITERAL1
|
||||
LED4 LITERAL1
|
||||
LED5 LITERAL1
|
||||
LED6 LITERAL1
|
||||
LED7 LITERAL1
|
||||
LED8 LITERAL1
|
||||
LED9 LITERAL1
|
||||
LED10 LITERAL1
|
||||
|
||||
Red LITERAL1
|
||||
Green LITERAL1
|
||||
Blue LITERAL1
|
||||
Yellow LITERAL1
|
||||
Lightblue LITERAL1
|
||||
Purble LITERAL1
|
||||
White LITERAL1
|
||||
Off LITERAL1
|
||||
|
||||
SELECT LITERAL1
|
||||
L3 LITERAL1
|
||||
R3 LITERAL1
|
||||
START LITERAL1
|
||||
UP LITERAL1
|
||||
RIGHT LITERAL1
|
||||
DOWN LITERAL1
|
||||
LEFT LITERAL1
|
||||
L2 LITERAL1
|
||||
R2 LITERAL1
|
||||
L1 LITERAL1
|
||||
R1 LITERAL1
|
||||
TRIANGLE LITERAL1
|
||||
CIRCLE LITERAL1
|
||||
CROSS LITERAL1
|
||||
SQUARE LITERAL1
|
||||
PS LITERAL1
|
||||
MOVE LITERAL1
|
||||
T LITERAL1
|
||||
|
||||
SHARE LITERAL1
|
||||
OPTIONS LITERAL1
|
||||
TOUCHPAD LITERAL1
|
||||
|
||||
LeftHatX LITERAL1
|
||||
LeftHatY LITERAL1
|
||||
RightHatX LITERAL1
|
||||
RightHatY LITERAL1
|
||||
|
||||
aX LITERAL1
|
||||
aY LITERAL1
|
||||
aZ LITERAL1
|
||||
gX LITERAL1
|
||||
gY LITERAL1
|
||||
gZ LITERAL1
|
||||
aXmove LITERAL1
|
||||
aYmove LITERAL1
|
||||
aZmove LITERAL1
|
||||
gXmove LITERAL1
|
||||
gYmove LITERAL1
|
||||
gZmove LITERAL1
|
||||
tempMove LITERAL1
|
||||
mXmove LITERAL1
|
||||
mZmove LITERAL1
|
||||
mYmove LITERAL1
|
||||
|
||||
Pitch LITERAL1
|
||||
Roll LITERAL1
|
||||
|
||||
Plugged LITERAL1
|
||||
Unplugged LITERAL1
|
||||
Charging LITERAL1
|
||||
NotCharging LITERAL1
|
||||
Shutdown LITERAL1
|
||||
Dying LITERAL1
|
||||
Low LITERAL1
|
||||
High LITERAL1
|
||||
Full LITERAL1
|
||||
MoveCharging LITERAL1
|
||||
MoveNotCharging LITERAL1
|
||||
MoveShutdown LITERAL1
|
||||
MoveDying LITERAL1
|
||||
MoveLow LITERAL1
|
||||
MoveHigh LITERAL1
|
||||
MoveFull LITERAL1
|
||||
CableRumble LITERAL1
|
||||
Cable LITERAL1
|
||||
BluetoothRumble LITERAL1
|
||||
Bluetooth LITERAL1
|
||||
|
||||
RumbleHigh LITERAL1
|
||||
RumbleLow LITERAL1
|
||||
|
||||
####################################################
|
||||
# Syntax Coloring Map For Xbox 360 Libraries
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
XBOXUSB KEYWORD1
|
||||
XBOXOLD KEYWORD1
|
||||
XBOXRECV KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
####################################################
|
||||
|
||||
setLedRaw KEYWORD2
|
||||
setLedBlink KEYWORD2
|
||||
setLedMode KEYWORD2
|
||||
getBatteryLevel KEYWORD2
|
||||
buttonChanged KEYWORD2
|
||||
|
||||
XboxReceiverConnected KEYWORD2
|
||||
Xbox360Connected KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Constants and enums (LITERAL1)
|
||||
####################################################
|
||||
|
||||
ALL LITERAL1
|
||||
|
||||
ROTATING LITERAL1
|
||||
FASTBLINK LITERAL1
|
||||
SLOWBLINK LITERAL1
|
||||
ALTERNATING LITERAL1
|
||||
|
||||
BACK LITERAL1
|
||||
|
||||
XBOX LITERAL1
|
||||
SYNC LITERAL1
|
||||
|
||||
BLACK LITERAL1
|
||||
WHITE LITERAL1
|
||||
|
||||
A LITERAL1
|
||||
B LITERAL1
|
||||
X LITERAL1
|
||||
Y LITERAL1
|
||||
|
||||
####################################################
|
||||
# Syntax Coloring Map For RFCOMM/SPP Library
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
SPP KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
####################################################
|
||||
|
||||
connected KEYWORD2
|
||||
discard KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Syntax Coloring Map For Wiimote Library
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
WII KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
####################################################
|
||||
|
||||
wiimoteConnected KEYWORD2
|
||||
nunchuckConnected KEYWORD2
|
||||
motionPlusConnected KEYWORD2
|
||||
wiiUProControllerConnected KEYWORD2
|
||||
setRumbleToggle KEYWORD2
|
||||
getPitch KEYWORD2
|
||||
getRoll KEYWORD2
|
||||
getYaw KEYWORD2
|
||||
getWiimotePitch KEYWORD2
|
||||
getWiimoteRoll KEYWORD2
|
||||
getNunchuckPitch KEYWORD2
|
||||
getNunchuckRoll KEYWORD2
|
||||
PAIR KEYWORD2
|
||||
statusRequest KEYWORD2
|
||||
getBatteryLevel KEYWORD2
|
||||
getWiiState KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Constants and enums (LITERAL1)
|
||||
####################################################
|
||||
|
||||
PLUS LITERAL1
|
||||
MINUS LITERAL1
|
||||
ONE LITERAL1
|
||||
TWO LITERAL1
|
||||
HOME LITERAL1
|
||||
Z LITERAL1
|
||||
C LITERAL1
|
||||
L LITERAL1
|
||||
R LITERAL1
|
||||
ZL LITERAL1
|
||||
ZR LITERAL1
|
||||
HatX LITERAL1
|
||||
HatY LITERAL1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions for the IR Camera
|
||||
####################################################
|
||||
|
||||
IRinitialize KEYWORD2
|
||||
isIRCameraEnabled KEYWORD2
|
||||
getIRx1 KEYWORD2
|
||||
getIRy1 KEYWORD2
|
||||
getIRs1 KEYWORD2
|
||||
getIRx2 KEYWORD2
|
||||
getIRy2 KEYWORD2
|
||||
getIRs2 KEYWORD2
|
||||
getIRx3 KEYWORD2
|
||||
getIRy3 KEYWORD2
|
||||
getIRs3 KEYWORD2
|
||||
getIRx4 KEYWORD2
|
||||
getIRy4 KEYWORD2
|
||||
getIRs4 KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Syntax Coloring Map For BTHID Library
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
BTHID KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
####################################################
|
||||
SetReportParser KEYWORD2
|
||||
setProtocolMode KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Syntax Coloring Map For PS Buzz Library
|
||||
####################################################
|
||||
|
||||
####################################################
|
||||
# Datatypes (KEYWORD1)
|
||||
####################################################
|
||||
|
||||
PSBuzz KEYWORD1
|
||||
|
||||
####################################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
####################################################
|
||||
|
||||
setLedOnAll KEYWORD2
|
||||
setLedOffAll KEYWORD2
|
||||
|
||||
####################################################
|
||||
# Constants and enums (LITERAL1)
|
||||
####################################################
|
||||
|
||||
RED LITERAL1
|
||||
YELLOW LITERAL1
|
||||
GREEN LITERAL1
|
||||
ORANGE LITERAL1
|
||||
BLUE LITERAL1
|
||||
@ -0,0 +1,46 @@
|
||||
{
|
||||
"name": "USB-Host-Shield-20",
|
||||
"keywords": "usb, host, ftdi, adk, acm, pl2303, hid, bluetooth, spp, ps3, ps4, buzz, xbox, wii, mass storage",
|
||||
"description": "Revision 2.0 of MAX3421E-based USB Host Shield Library",
|
||||
"authors":
|
||||
[
|
||||
{
|
||||
"name": "Oleg Mazurov",
|
||||
"email": "mazurov@circuitsathome.com",
|
||||
"url": "http://www.circuitsathome.com",
|
||||
"maintainer": true
|
||||
},
|
||||
{
|
||||
"name": "Alexei Glushchenko",
|
||||
"email": "alex-gl@mail.ru"
|
||||
},
|
||||
{
|
||||
"name": "Kristian Lauszus",
|
||||
"email": "kristianl@tkjelectronics.com",
|
||||
"url": "http://tkjelectronics.com",
|
||||
"maintainer": true
|
||||
},
|
||||
{
|
||||
"name": "Andrew Kroll",
|
||||
"email": "xxxajk@gmail.com",
|
||||
"maintainer": true
|
||||
}
|
||||
],
|
||||
"repository":
|
||||
{
|
||||
"type": "git",
|
||||
"url": "https://github.com/felis/USB_Host_Shield_2.0.git"
|
||||
},
|
||||
"examples":
|
||||
[
|
||||
"examples/*/*.ino",
|
||||
"examples/*/*/*.ino"
|
||||
],
|
||||
"frameworks": "arduino",
|
||||
"platforms":
|
||||
[
|
||||
"atmelavr",
|
||||
"teensy",
|
||||
"atmelsam"
|
||||
]
|
||||
}
|
||||
@ -0,0 +1,82 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#if !defined(_usb_h_) || defined(MACROS_H)
|
||||
#error "Never include macros.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define MACROS_H
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// HANDY MACROS
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
#define VALUE_BETWEEN(v,l,h) (((v)>(l)) && ((v)<(h)))
|
||||
#define VALUE_WITHIN(v,l,h) (((v)>=(l)) && ((v)<=(h)))
|
||||
#define output_pgm_message(wa,fp,mp,el) wa = &mp, fp((char *)pgm_read_pointer(wa), el)
|
||||
#define output_if_between(v,l,h,wa,fp,mp,el) if(VALUE_BETWEEN(v,l,h)) output_pgm_message(wa,fp,mp[v-(l+1)],el);
|
||||
|
||||
#define SWAP(a, b) (((a) ^= (b)), ((b) ^= (a)), ((a) ^= (b)))
|
||||
#ifndef __BYTE_GRABBING_DEFINED__
|
||||
#define __BYTE_GRABBING_DEFINED__ 1
|
||||
#ifdef BROKEN_OPTIMIZER_LITTLE_ENDIAN
|
||||
// Note: Use this if your compiler generates horrible assembler!
|
||||
#define BGRAB0(__usi__) (((uint8_t *)&(__usi__))[0])
|
||||
#define BGRAB1(__usi__) (((uint8_t *)&(__usi__))[1])
|
||||
#define BGRAB2(__usi__) (((uint8_t *)&(__usi__))[2])
|
||||
#define BGRAB3(__usi__) (((uint8_t *)&(__usi__))[3])
|
||||
#define BGRAB4(__usi__) (((uint8_t *)&(__usi__))[4])
|
||||
#define BGRAB5(__usi__) (((uint8_t *)&(__usi__))[5])
|
||||
#define BGRAB6(__usi__) (((uint8_t *)&(__usi__))[6])
|
||||
#define BGRAB7(__usi__) (((uint8_t *)&(__usi__))[7])
|
||||
#else
|
||||
// Note: The cast alone to uint8_t is actually enough.
|
||||
// GCC throws out the "& 0xff", and the size is no different.
|
||||
// Some compilers need it.
|
||||
#define BGRAB0(__usi__) ((uint8_t)((__usi__) & 0xff ))
|
||||
#define BGRAB1(__usi__) ((uint8_t)(((__usi__) >> 8) & 0xff))
|
||||
#define BGRAB2(__usi__) ((uint8_t)(((__usi__) >> 16) & 0xff))
|
||||
#define BGRAB3(__usi__) ((uint8_t)(((__usi__) >> 24) & 0xff))
|
||||
#define BGRAB4(__usi__) ((uint8_t)(((__usi__) >> 32) & 0xff))
|
||||
#define BGRAB5(__usi__) ((uint8_t)(((__usi__) >> 40) & 0xff))
|
||||
#define BGRAB6(__usi__) ((uint8_t)(((__usi__) >> 48) & 0xff))
|
||||
#define BGRAB7(__usi__) ((uint8_t)(((__usi__) >> 56) & 0xff))
|
||||
#endif
|
||||
#define BOVER1(__usi__) ((uint16_t)(__usi__) << 8)
|
||||
#define BOVER2(__usi__) ((uint32_t)(__usi__) << 16)
|
||||
#define BOVER3(__usi__) ((uint32_t)(__usi__) << 24)
|
||||
#define BOVER4(__usi__) ((uint64_t)(__usi__) << 32)
|
||||
#define BOVER5(__usi__) ((uint64_t)(__usi__) << 40)
|
||||
#define BOVER6(__usi__) ((uint64_t)(__usi__) << 48)
|
||||
#define BOVER7(__usi__) ((uint64_t)(__usi__) << 56)
|
||||
|
||||
// These are the smallest and fastest ways I have found so far in pure C/C++.
|
||||
#define BMAKE16(__usc1__,__usc0__) ((uint16_t)((uint16_t)(__usc0__) | (uint16_t)BOVER1(__usc1__)))
|
||||
#define BMAKE32(__usc3__,__usc2__,__usc1__,__usc0__) ((uint32_t)((uint32_t)(__usc0__) | (uint32_t)BOVER1(__usc1__) | (uint32_t)BOVER2(__usc2__) | (uint32_t)BOVER3(__usc3__)))
|
||||
#define BMAKE64(__usc7__,__usc6__,__usc5__,__usc4__,__usc3__,__usc2__,__usc1__,__usc0__) ((uint64_t)((uint64_t)__usc0__ | (uint64_t)BOVER1(__usc1__) | (uint64_t)BOVER2(__usc2__) | (uint64_t)BOVER3(__usc3__) | (uint64_t)BOVER4(__usc4__) | (uint64_t)BOVER5(__usc5__) | (uint64_t)BOVER6(__usc6__) | (uint64_t)BOVER1(__usc7__)))
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Debug macros: Strings are stored in progmem (flash) instead of RAM.
|
||||
*/
|
||||
#define USBTRACE(s) (Notify(PSTR(s), 0x80))
|
||||
#define USBTRACE1(s,l) (Notify(PSTR(s), l))
|
||||
#define USBTRACE2(s,r) (Notify(PSTR(s), 0x80), D_PrintHex((r), 0x80), Notify(PSTR("\r\n"), 0x80))
|
||||
#define USBTRACE3(s,r,l) (Notify(PSTR(s), l), D_PrintHex((r), l), Notify(PSTR("\r\n"), l))
|
||||
|
||||
|
||||
#endif /* MACROS_H */
|
||||
|
||||
@ -0,0 +1,1270 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#include "masstorage.h"
|
||||
|
||||
const uint8_t BulkOnly::epDataInIndex = 1;
|
||||
const uint8_t BulkOnly::epDataOutIndex = 2;
|
||||
const uint8_t BulkOnly::epInterruptInIndex = 3;
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
// Interface code
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* Get the capacity of the media
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @return media capacity
|
||||
*/
|
||||
uint32_t BulkOnly::GetCapacity(uint8_t lun) {
|
||||
if(LUNOk[lun])
|
||||
return CurrentCapacity[lun];
|
||||
return 0LU;
|
||||
}
|
||||
|
||||
/**
|
||||
* Get the sector (block) size used on the media
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @return media sector size
|
||||
*/
|
||||
uint16_t BulkOnly::GetSectorSize(uint8_t lun) {
|
||||
if(LUNOk[lun])
|
||||
return CurrentSectorSize[lun];
|
||||
return 0U;
|
||||
}
|
||||
|
||||
/**
|
||||
* Test if LUN is ready for use
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @return true if LUN is ready for use
|
||||
*/
|
||||
bool BulkOnly::LUNIsGood(uint8_t lun) {
|
||||
return LUNOk[lun];
|
||||
}
|
||||
|
||||
/**
|
||||
* Test if LUN is write protected
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @return cached status of write protect switch
|
||||
*/
|
||||
boolean BulkOnly::WriteProtected(uint8_t lun) {
|
||||
return WriteOk[lun];
|
||||
}
|
||||
|
||||
/**
|
||||
* Wrap and execute a SCSI CDB with length of 6
|
||||
*
|
||||
* @param cdb CDB to execute
|
||||
* @param buf_size Size of expected transaction
|
||||
* @param buf Buffer
|
||||
* @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::SCSITransaction6(CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) {
|
||||
// promote buf_size to 32bits.
|
||||
CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir);
|
||||
//SetCurLUN(cdb->LUN);
|
||||
return (HandleSCSIError(Transaction(&cbw, buf_size, buf)));
|
||||
}
|
||||
|
||||
/**
|
||||
* Wrap and execute a SCSI CDB with length of 10
|
||||
*
|
||||
* @param cdb CDB to execute
|
||||
* @param buf_size Size of expected transaction
|
||||
* @param buf Buffer
|
||||
* @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::SCSITransaction10(CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) {
|
||||
// promote buf_size to 32bits.
|
||||
CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir);
|
||||
//SetCurLUN(cdb->LUN);
|
||||
return (HandleSCSIError(Transaction(&cbw, buf_size, buf)));
|
||||
}
|
||||
|
||||
/**
|
||||
* Lock or Unlock the tray or door on device.
|
||||
* Caution: Some devices with buggy firmware will lock up.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param lock 1 to lock, 0 to unlock
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::LockMedia(uint8_t lun, uint8_t lock) {
|
||||
Notify(PSTR("\r\nLockMedia\r\n"), 0x80);
|
||||
Notify(PSTR("---------\r\n"), 0x80);
|
||||
|
||||
CDB6_t cdb = CDB6_t(SCSI_CMD_PREVENT_REMOVAL, lun, (uint8_t)0, lock);
|
||||
return SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)MASS_CMD_DIR_IN);
|
||||
}
|
||||
|
||||
/**
|
||||
* Media control, for spindle motor and media tray or door.
|
||||
* This includes CDROM, TAPE and anything with a media loader.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param ctl 0x00 Stop Motor, 0x01 Start Motor, 0x02 Eject Media, 0x03 Load Media
|
||||
* @return 0 on success
|
||||
*/
|
||||
uint8_t BulkOnly::MediaCTL(uint8_t lun, uint8_t ctl) {
|
||||
Notify(PSTR("\r\nMediaCTL\r\n"), 0x80);
|
||||
Notify(PSTR("-----------------\r\n"), 0x80);
|
||||
|
||||
uint8_t rcode = MASS_ERR_UNIT_NOT_READY;
|
||||
if(bAddress) {
|
||||
CDB6_t cdb = CDB6_t(SCSI_CMD_START_STOP_UNIT, lun, ctl & 0x03, 0);
|
||||
rcode = SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)MASS_CMD_DIR_OUT);
|
||||
} else {
|
||||
SetCurLUN(lun);
|
||||
}
|
||||
return rcode;
|
||||
}
|
||||
|
||||
/**
|
||||
* Read data from media
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param addr LBA address on media to read
|
||||
* @param bsize size of a block (we should probably use the cached size)
|
||||
* @param blocks how many blocks to read
|
||||
* @param buf memory that is able to hold the requested data
|
||||
* @return 0 on success
|
||||
*/
|
||||
uint8_t BulkOnly::Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf) {
|
||||
if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA;
|
||||
Notify(PSTR("\r\nRead LUN:\t"), 0x80);
|
||||
D_PrintHex<uint8_t > (lun, 0x90);
|
||||
Notify(PSTR("\r\nLBA:\t\t"), 0x90);
|
||||
D_PrintHex<uint32_t > (addr, 0x90);
|
||||
Notify(PSTR("\r\nblocks:\t\t"), 0x90);
|
||||
D_PrintHex<uint8_t > (blocks, 0x90);
|
||||
Notify(PSTR("\r\nblock size:\t"), 0x90);
|
||||
D_PrintHex<uint16_t > (bsize, 0x90);
|
||||
Notify(PSTR("\r\n---------\r\n"), 0x80);
|
||||
CDB10_t cdb = CDB10_t(SCSI_CMD_READ_10, lun, blocks, addr);
|
||||
|
||||
again:
|
||||
uint8_t er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), buf, (uint8_t)MASS_CMD_DIR_IN);
|
||||
|
||||
if(er == MASS_ERR_STALL) {
|
||||
MediaCTL(lun, 1);
|
||||
DELAY(150);
|
||||
if(!TestUnitReady(lun)) goto again;
|
||||
}
|
||||
return er;
|
||||
}
|
||||
|
||||
/**
|
||||
* Write data to media
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param addr LBA address on media to write
|
||||
* @param bsize size of a block (we should probably use the cached size)
|
||||
* @param blocks how many blocks to write
|
||||
* @param buf memory that contains the data to write
|
||||
* @return 0 on success
|
||||
*/
|
||||
uint8_t BulkOnly::Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t * buf) {
|
||||
if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA;
|
||||
if(!WriteOk[lun]) return MASS_ERR_WRITE_PROTECTED;
|
||||
Notify(PSTR("\r\nWrite LUN:\t"), 0x80);
|
||||
D_PrintHex<uint8_t > (lun, 0x90);
|
||||
Notify(PSTR("\r\nLBA:\t\t"), 0x90);
|
||||
D_PrintHex<uint32_t > (addr, 0x90);
|
||||
Notify(PSTR("\r\nblocks:\t\t"), 0x90);
|
||||
D_PrintHex<uint8_t > (blocks, 0x90);
|
||||
Notify(PSTR("\r\nblock size:\t"), 0x90);
|
||||
D_PrintHex<uint16_t > (bsize, 0x90);
|
||||
Notify(PSTR("\r\n---------\r\n"), 0x80);
|
||||
CDB10_t cdb = CDB10_t(SCSI_CMD_WRITE_10, lun, blocks, addr);
|
||||
|
||||
again:
|
||||
uint8_t er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), (void*)buf, (uint8_t)MASS_CMD_DIR_OUT);
|
||||
|
||||
if(er == MASS_ERR_WRITE_STALL) {
|
||||
MediaCTL(lun, 1);
|
||||
DELAY(150);
|
||||
if(!TestUnitReady(lun)) goto again;
|
||||
}
|
||||
return er;
|
||||
}
|
||||
|
||||
// End of user functions, the remaining code below is driver internals.
|
||||
// Only developer serviceable parts below!
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
// Main driver code
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
BulkOnly::BulkOnly(USB *p) :
|
||||
pUsb(p),
|
||||
bAddress(0),
|
||||
bIface(0),
|
||||
bNumEP(1),
|
||||
qNextPollTime(0),
|
||||
bPollEnable(false),
|
||||
//dCBWTag(0),
|
||||
bLastUsbError(0) {
|
||||
ClearAllEP();
|
||||
dCBWTag = 0;
|
||||
if(pUsb)
|
||||
pUsb->RegisterDeviceClass(this);
|
||||
}
|
||||
|
||||
/**
|
||||
* USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET == success
|
||||
* We need to standardize either the rcode, or change the API to return values
|
||||
* so a signal that additional actions are required can be produced.
|
||||
* Some of these codes do exist already.
|
||||
*
|
||||
* TECHNICAL: We could do most of this code elsewhere, with the exception of checking the class instance.
|
||||
* Doing so would save some program memory when using multiple drivers.
|
||||
*
|
||||
* @param parent USB address of parent
|
||||
* @param port address of port on parent
|
||||
* @param lowspeed true if device is low speed
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed) {
|
||||
|
||||
const uint8_t constBufSize = sizeof (USB_DEVICE_DESCRIPTOR);
|
||||
|
||||
uint8_t buf[constBufSize];
|
||||
USB_DEVICE_DESCRIPTOR * udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR*>(buf);
|
||||
uint8_t rcode;
|
||||
UsbDevice *p = NULL;
|
||||
EpInfo *oldep_ptr = NULL;
|
||||
USBTRACE("MS ConfigureDevice\r\n");
|
||||
ClearAllEP();
|
||||
AddressPool &addrPool = pUsb->GetAddressPool();
|
||||
|
||||
|
||||
if(bAddress)
|
||||
return USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE;
|
||||
|
||||
// <TECHNICAL>
|
||||
// Get pointer to pseudo device with address 0 assigned
|
||||
p = addrPool.GetUsbDevicePtr(0);
|
||||
if(!p) {
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
}
|
||||
|
||||
if(!p->epinfo) {
|
||||
USBTRACE("epinfo\r\n");
|
||||
return USB_ERROR_EPINFO_IS_NULL;
|
||||
}
|
||||
|
||||
// Save old pointer to EP_RECORD of address 0
|
||||
oldep_ptr = p->epinfo;
|
||||
|
||||
// Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence
|
||||
p->epinfo = epInfo;
|
||||
|
||||
p->lowspeed = lowspeed;
|
||||
// Get device descriptor
|
||||
rcode = pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf);
|
||||
|
||||
// Restore p->epinfo
|
||||
p->epinfo = oldep_ptr;
|
||||
|
||||
if(rcode) {
|
||||
goto FailGetDevDescr;
|
||||
}
|
||||
// Allocate new address according to device class
|
||||
bAddress = addrPool.AllocAddress(parent, false, port);
|
||||
|
||||
if(!bAddress)
|
||||
return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL;
|
||||
|
||||
// Extract Max Packet Size from the device descriptor
|
||||
epInfo[0].maxPktSize = udd->bMaxPacketSize0;
|
||||
// Steal and abuse from epInfo structure to save on memory.
|
||||
epInfo[1].epAddr = udd->bNumConfigurations;
|
||||
// </TECHNICAL>
|
||||
return USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET;
|
||||
|
||||
FailGetDevDescr:
|
||||
#ifdef DEBUG_USB_HOST
|
||||
NotifyFailGetDevDescr(rcode);
|
||||
#endif
|
||||
rcode = USB_ERROR_FailGetDevDescr;
|
||||
|
||||
Release();
|
||||
return rcode;
|
||||
};
|
||||
|
||||
/**
|
||||
*
|
||||
* @param parent (not used)
|
||||
* @param port (not used)
|
||||
* @param lowspeed true if device is low speed
|
||||
* @return 0 for success
|
||||
*/
|
||||
uint8_t BulkOnly::Init(uint8_t parent, uint8_t port, bool lowspeed) {
|
||||
uint8_t rcode;
|
||||
uint8_t num_of_conf = epInfo[1].epAddr; // number of configurations
|
||||
epInfo[1].epAddr = 0;
|
||||
USBTRACE("MS Init\r\n");
|
||||
|
||||
AddressPool &addrPool = pUsb->GetAddressPool();
|
||||
UsbDevice *p = addrPool.GetUsbDevicePtr(bAddress);
|
||||
|
||||
if(!p)
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
|
||||
// Assign new address to the device
|
||||
DELAY(2000);
|
||||
rcode = pUsb->setAddr(0, 0, bAddress);
|
||||
|
||||
if(rcode) {
|
||||
p->lowspeed = false;
|
||||
addrPool.FreeAddress(bAddress);
|
||||
bAddress = 0;
|
||||
USBTRACE2("setAddr:", rcode);
|
||||
return rcode;
|
||||
}
|
||||
|
||||
USBTRACE2("Addr:", bAddress);
|
||||
|
||||
p->lowspeed = false;
|
||||
|
||||
p = addrPool.GetUsbDevicePtr(bAddress);
|
||||
|
||||
if(!p)
|
||||
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
|
||||
|
||||
p->lowspeed = lowspeed;
|
||||
|
||||
// Assign epInfo to epinfo pointer
|
||||
rcode = pUsb->setEpInfoEntry(bAddress, 1, epInfo);
|
||||
|
||||
if(rcode)
|
||||
goto FailSetDevTblEntry;
|
||||
|
||||
USBTRACE2("NC:", num_of_conf);
|
||||
|
||||
for(uint8_t i = 0; i < num_of_conf; i++) {
|
||||
ConfigDescParser< USB_CLASS_MASS_STORAGE,
|
||||
MASS_SUBCLASS_SCSI,
|
||||
MASS_PROTO_BBB,
|
||||
CP_MASK_COMPARE_CLASS |
|
||||
CP_MASK_COMPARE_SUBCLASS |
|
||||
CP_MASK_COMPARE_PROTOCOL > BulkOnlyParser(this);
|
||||
|
||||
rcode = pUsb->getConfDescr(bAddress, 0, i, &BulkOnlyParser);
|
||||
|
||||
if(rcode)
|
||||
goto FailGetConfDescr;
|
||||
|
||||
if(bNumEP > 1)
|
||||
break;
|
||||
}
|
||||
|
||||
if(bNumEP < 3)
|
||||
return USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED;
|
||||
|
||||
// Assign epInfo to epinfo pointer
|
||||
pUsb->setEpInfoEntry(bAddress, bNumEP, epInfo);
|
||||
|
||||
USBTRACE2("Conf:", bConfNum);
|
||||
|
||||
// Set Configuration Value
|
||||
rcode = pUsb->setConf(bAddress, 0, bConfNum);
|
||||
|
||||
if(rcode)
|
||||
goto FailSetConfDescr;
|
||||
|
||||
//Linux does a 1sec delay after this.
|
||||
DELAY(1000);
|
||||
|
||||
rcode = GetMaxLUN(&bMaxLUN);
|
||||
if(rcode)
|
||||
goto FailGetMaxLUN;
|
||||
|
||||
if(bMaxLUN >= MASS_MAX_SUPPORTED_LUN) bMaxLUN = MASS_MAX_SUPPORTED_LUN - 1;
|
||||
ErrorMessage<uint8_t > (PSTR("MaxLUN"), bMaxLUN);
|
||||
|
||||
DELAY(1000); // Delay a bit for slow firmware.
|
||||
|
||||
for(uint8_t lun = 0; lun <= bMaxLUN; lun++) {
|
||||
InquiryResponse response;
|
||||
rcode = Inquiry(lun, sizeof (InquiryResponse), (uint8_t*) & response);
|
||||
if(rcode) {
|
||||
ErrorMessage<uint8_t > (PSTR("Inquiry"), rcode);
|
||||
} else {
|
||||
#if 0
|
||||
printf("LUN %i `", lun);
|
||||
uint8_t *buf = response.VendorID;
|
||||
for(int i = 0; i < 28; i++) printf("%c", buf[i]);
|
||||
printf("'\r\nQualifier %1.1X ", response.PeripheralQualifier);
|
||||
printf("Device type %2.2X ", response.DeviceType);
|
||||
printf("RMB %1.1X ", response.Removable);
|
||||
printf("SSCS %1.1X ", response.SCCS);
|
||||
uint8_t sv = response.Version;
|
||||
printf("SCSI version %2.2X\r\nDevice conforms to ", sv);
|
||||
switch(sv) {
|
||||
case 0:
|
||||
printf("No specific");
|
||||
break;
|
||||
case 1:
|
||||
printf("ANSI X3.131-1986 (ANSI 1)");
|
||||
break;
|
||||
case 2:
|
||||
printf("ANSI X3.131-1994 (ANSI 2)");
|
||||
break;
|
||||
case 3:
|
||||
printf("ANSI INCITS 301-1997 (SPC)");
|
||||
break;
|
||||
case 4:
|
||||
printf("ANSI INCITS 351-2001 (SPC-2)");
|
||||
break;
|
||||
case 5:
|
||||
printf("ANSI INCITS 408-2005 (SPC-4)");
|
||||
break;
|
||||
case 6:
|
||||
printf("T10/1731-D (SPC-4)");
|
||||
break;
|
||||
default:
|
||||
printf("unknown");
|
||||
}
|
||||
printf(" standards.\r\n");
|
||||
#endif
|
||||
uint8_t tries = 0xf0;
|
||||
while((rcode = TestUnitReady(lun))) {
|
||||
if(rcode == 0x08) break; // break on no media, this is OK to do.
|
||||
// try to lock media and spin up
|
||||
if(tries < 14) {
|
||||
LockMedia(lun, 1);
|
||||
MediaCTL(lun, 1); // I actually have a USB stick that needs this!
|
||||
} else DELAY(2 * (tries + 1));
|
||||
tries++;
|
||||
if(!tries) break;
|
||||
}
|
||||
if(!rcode) {
|
||||
DELAY(1000);
|
||||
LUNOk[lun] = CheckLUN(lun);
|
||||
if(!LUNOk[lun]) LUNOk[lun] = CheckLUN(lun);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
CheckMedia();
|
||||
|
||||
rcode = OnInit();
|
||||
|
||||
if(rcode)
|
||||
goto FailOnInit;
|
||||
|
||||
#ifdef DEBUG_USB_HOST
|
||||
USBTRACE("MS configured\r\n\r\n");
|
||||
#endif
|
||||
|
||||
bPollEnable = true;
|
||||
|
||||
//USBTRACE("Poll enabled\r\n");
|
||||
return 0;
|
||||
|
||||
FailSetConfDescr:
|
||||
#ifdef DEBUG_USB_HOST
|
||||
NotifyFailSetConfDescr();
|
||||
goto Fail;
|
||||
#endif
|
||||
|
||||
FailOnInit:
|
||||
#ifdef DEBUG_USB_HOST
|
||||
USBTRACE("OnInit:");
|
||||
goto Fail;
|
||||
#endif
|
||||
|
||||
FailGetMaxLUN:
|
||||
#ifdef DEBUG_USB_HOST
|
||||
USBTRACE("GetMaxLUN:");
|
||||
goto Fail;
|
||||
#endif
|
||||
|
||||
//#ifdef DEBUG_USB_HOST
|
||||
//FailInvalidSectorSize:
|
||||
// USBTRACE("Sector Size is NOT VALID: ");
|
||||
// goto Fail;
|
||||
//#endif
|
||||
|
||||
FailSetDevTblEntry:
|
||||
#ifdef DEBUG_USB_HOST
|
||||
NotifyFailSetDevTblEntry();
|
||||
goto Fail;
|
||||
#endif
|
||||
|
||||
FailGetConfDescr:
|
||||
#ifdef DEBUG_USB_HOST
|
||||
NotifyFailGetConfDescr();
|
||||
#endif
|
||||
|
||||
#ifdef DEBUG_USB_HOST
|
||||
Fail:
|
||||
NotifyFail(rcode);
|
||||
#endif
|
||||
Release();
|
||||
return rcode;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param conf
|
||||
* @param iface
|
||||
* @param alt
|
||||
* @param proto
|
||||
* @param pep
|
||||
*/
|
||||
void BulkOnly::EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR * pep) {
|
||||
ErrorMessage<uint8_t > (PSTR("Conf.Val"), conf);
|
||||
ErrorMessage<uint8_t > (PSTR("Iface Num"), iface);
|
||||
ErrorMessage<uint8_t > (PSTR("Alt.Set"), alt);
|
||||
|
||||
bConfNum = conf;
|
||||
|
||||
uint8_t index;
|
||||
|
||||
#if 1
|
||||
if((pep->bmAttributes & 0x02) == 2) {
|
||||
index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex;
|
||||
// Fill in the endpoint info structure
|
||||
epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F);
|
||||
epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize;
|
||||
epInfo[index].epAttribs = 0;
|
||||
|
||||
bNumEP++;
|
||||
|
||||
PrintEndpointDescriptor(pep);
|
||||
|
||||
}
|
||||
#else
|
||||
if((pep->bmAttributes & 0x03) == 3 && (pep->bEndpointAddress & 0x80) == 0x80)
|
||||
index = epInterruptInIndex;
|
||||
else
|
||||
if((pep->bmAttributes & 0x02) == 2)
|
||||
index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex;
|
||||
else
|
||||
return;
|
||||
|
||||
// Fill in the endpoint info structure
|
||||
epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F);
|
||||
epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize;
|
||||
epInfo[index].epAttribs = 0;
|
||||
|
||||
bNumEP++;
|
||||
|
||||
PrintEndpointDescriptor(pep);
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::Release() {
|
||||
ClearAllEP();
|
||||
pUsb->GetAddressPool().FreeAddress(bAddress);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @return true if LUN is ready for use.
|
||||
*/
|
||||
boolean BulkOnly::CheckLUN(uint8_t lun) {
|
||||
uint8_t rcode;
|
||||
Capacity capacity;
|
||||
for(uint8_t i = 0; i < 8; i++) capacity.data[i] = 0;
|
||||
|
||||
rcode = ReadCapacity10(lun, (uint8_t*)capacity.data);
|
||||
if(rcode) {
|
||||
//printf(">>>>>>>>>>>>>>>>ReadCapacity returned %i\r\n", rcode);
|
||||
return false;
|
||||
}
|
||||
ErrorMessage<uint8_t > (PSTR(">>>>>>>>>>>>>>>>CAPACITY OK ON LUN"), lun);
|
||||
for(uint8_t i = 0; i < 8 /*sizeof (Capacity)*/; i++)
|
||||
D_PrintHex<uint8_t > (capacity.data[i], 0x80);
|
||||
Notify(PSTR("\r\n\r\n"), 0x80);
|
||||
// Only 512/1024/2048/4096 are valid values!
|
||||
uint32_t c = BMAKE32(capacity.data[4], capacity.data[5], capacity.data[6], capacity.data[7]);
|
||||
if(c != 0x0200LU && c != 0x0400LU && c != 0x0800LU && c != 0x1000LU) {
|
||||
return false;
|
||||
}
|
||||
// Store capacity information.
|
||||
CurrentSectorSize[lun] = (uint16_t)(c); // & 0xFFFF);
|
||||
|
||||
CurrentCapacity[lun] = BMAKE32(capacity.data[0], capacity.data[1], capacity.data[2], capacity.data[3]) + 1;
|
||||
if(CurrentCapacity[lun] == /*0xffffffffLU */ 0x01LU || CurrentCapacity[lun] == 0x00LU) {
|
||||
// Buggy firmware will report 0xffffffff or 0 for no media
|
||||
if(CurrentCapacity[lun])
|
||||
ErrorMessage<uint8_t > (PSTR(">>>>>>>>>>>>>>>>BUGGY FIRMWARE. CAPACITY FAIL ON LUN"), lun);
|
||||
return false;
|
||||
}
|
||||
DELAY(20);
|
||||
Page3F(lun);
|
||||
if(!TestUnitReady(lun)) return true;
|
||||
return false;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* Scan for media change on all LUNs
|
||||
*/
|
||||
void BulkOnly::CheckMedia() {
|
||||
for(uint8_t lun = 0; lun <= bMaxLUN; lun++) {
|
||||
if(TestUnitReady(lun)) {
|
||||
LUNOk[lun] = false;
|
||||
continue;
|
||||
}
|
||||
if(!LUNOk[lun])
|
||||
LUNOk[lun] = CheckLUN(lun);
|
||||
}
|
||||
#if 0
|
||||
printf("}}}}}}}}}}}}}}}}STATUS ");
|
||||
for(uint8_t lun = 0; lun <= bMaxLUN; lun++) {
|
||||
if(LUNOk[lun])
|
||||
printf("#");
|
||||
else printf(".");
|
||||
}
|
||||
printf("\r\n");
|
||||
#endif
|
||||
qNextPollTime = millis() + 2000;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::Poll() {
|
||||
//uint8_t rcode = 0;
|
||||
|
||||
if(!bPollEnable)
|
||||
return 0;
|
||||
|
||||
if((long)(millis() - qNextPollTime) >= 0L) {
|
||||
CheckMedia();
|
||||
}
|
||||
//rcode = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
// SCSI code
|
||||
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param plun
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::GetMaxLUN(uint8_t *plun) {
|
||||
uint8_t ret = pUsb->ctrlReq(bAddress, 0, bmREQ_MASSIN, MASS_REQ_GET_MAX_LUN, 0, 0, bIface, 1, 1, plun, NULL);
|
||||
|
||||
if(ret == hrSTALL)
|
||||
*plun = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only. Used during Driver Init
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param bsize
|
||||
* @param buf
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::Inquiry(uint8_t lun, uint16_t bsize, uint8_t *buf) {
|
||||
Notify(PSTR("\r\nInquiry\r\n"), 0x80);
|
||||
Notify(PSTR("---------\r\n"), 0x80);
|
||||
|
||||
CDB6_t cdb = CDB6_t(SCSI_CMD_INQUIRY, lun, 0LU, (uint8_t)bsize, 0);
|
||||
uint8_t rc = SCSITransaction6(&cdb, bsize, buf, (uint8_t)MASS_CMD_DIR_IN);
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::TestUnitReady(uint8_t lun) {
|
||||
//SetCurLUN(lun);
|
||||
if(!bAddress)
|
||||
return MASS_ERR_UNIT_NOT_READY;
|
||||
|
||||
Notify(PSTR("\r\nTestUnitReady\r\n"), 0x80);
|
||||
Notify(PSTR("-----------------\r\n"), 0x80);
|
||||
|
||||
CDB6_t cdb = CDB6_t(SCSI_CMD_TEST_UNIT_READY, lun, (uint8_t)0, 0);
|
||||
return SCSITransaction6(&cdb, 0, NULL, (uint8_t)MASS_CMD_DIR_IN);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param pc
|
||||
* @param page
|
||||
* @param subpage
|
||||
* @param len
|
||||
* @param pbuf
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t * pbuf) {
|
||||
Notify(PSTR("\r\rModeSense\r\n"), 0x80);
|
||||
Notify(PSTR("------------\r\n"), 0x80);
|
||||
|
||||
CDB6_t cdb = CDB6_t(SCSI_CMD_TEST_UNIT_READY, lun, (uint32_t)((((pc << 6) | page) << 8) | subpage), len, 0);
|
||||
return SCSITransaction6(&cdb, len, pbuf, (uint8_t)MASS_CMD_DIR_IN);
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param bsize
|
||||
* @param buf
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::ReadCapacity10(uint8_t lun, uint8_t *buf) {
|
||||
Notify(PSTR("\r\nReadCapacity\r\n"), 0x80);
|
||||
Notify(PSTR("---------------\r\n"), 0x80);
|
||||
|
||||
CDB10_t cdb = CDB10_t(SCSI_CMD_READ_CAPACITY_10, lun);
|
||||
return SCSITransaction10(&cdb, 8, buf, (uint8_t)MASS_CMD_DIR_IN);
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* Page 3F contains write protect status.
|
||||
*
|
||||
* @param lun Logical Unit Number to test.
|
||||
* @return Write protect switch status.
|
||||
*/
|
||||
uint8_t BulkOnly::Page3F(uint8_t lun) {
|
||||
uint8_t buf[192];
|
||||
for(int i = 0; i < 192; i++) {
|
||||
buf[i] = 0x00;
|
||||
}
|
||||
WriteOk[lun] = true;
|
||||
#if SKIP_WRITE_PROTECT
|
||||
return 0;
|
||||
#else // SKIP_WRITE_PROTECT
|
||||
uint8_t rc = ModeSense6(lun, 0, 0x3f, 0, 192, buf);
|
||||
if(!rc) {
|
||||
WriteOk[lun] = ((buf[2] & 0x80) == 0);
|
||||
Notify(PSTR("Mode Sense: "), 0x80);
|
||||
for(int i = 0; i < 4; i++) {
|
||||
D_PrintHex<uint8_t > (buf[i], 0x80);
|
||||
Notify(PSTR(" "), 0x80);
|
||||
}
|
||||
Notify(PSTR("\r\n"), 0x80);
|
||||
}
|
||||
return rc;
|
||||
#endif // SKIP_WRITE_PROTECT
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @param size
|
||||
* @param buf
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::RequestSense(uint8_t lun, uint16_t size, uint8_t *buf) {
|
||||
Notify(PSTR("\r\nRequestSense\r\n"), 0x80);
|
||||
Notify(PSTR("----------------\r\n"), 0x80);
|
||||
|
||||
CDB6_t cdb = CDB6_t(SCSI_CMD_REQUEST_SENSE, lun, 0LU, (uint8_t)size, 0);
|
||||
CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)size, &cdb, (uint8_t)MASS_CMD_DIR_IN);
|
||||
//SetCurLUN(lun);
|
||||
return Transaction(&cbw, size, buf);
|
||||
}
|
||||
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
// USB code
|
||||
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param index
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::ClearEpHalt(uint8_t index) {
|
||||
if(index == 0)
|
||||
return 0;
|
||||
|
||||
uint8_t ret = 0;
|
||||
|
||||
while((ret = (pUsb->ctrlReq(bAddress, 0, USB_SETUP_HOST_TO_DEVICE | USB_SETUP_TYPE_STANDARD | USB_SETUP_RECIPIENT_ENDPOINT, USB_REQUEST_CLEAR_FEATURE, USB_FEATURE_ENDPOINT_HALT, 0, ((index == epDataInIndex) ? (0x80 | epInfo[index].epAddr) : epInfo[index].epAddr), 0, 0, NULL, NULL)) == 0x01))
|
||||
DELAY(6);
|
||||
|
||||
if(ret) {
|
||||
ErrorMessage<uint8_t > (PSTR("ClearEpHalt"), ret);
|
||||
ErrorMessage<uint8_t > (PSTR("EP"), ((index == epDataInIndex) ? (0x80 | epInfo[index].epAddr) : epInfo[index].epAddr));
|
||||
return ret;
|
||||
}
|
||||
epInfo[index].bmSndToggle = 0;
|
||||
epInfo[index].bmRcvToggle = 0;
|
||||
// epAttribs = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
*/
|
||||
void BulkOnly::Reset() {
|
||||
while(pUsb->ctrlReq(bAddress, 0, bmREQ_MASSOUT, MASS_REQ_BOMSR, 0, 0, bIface, 0, 0, NULL, NULL) == 0x01) DELAY(6);
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @return 0 if successful
|
||||
*/
|
||||
uint8_t BulkOnly::ResetRecovery() {
|
||||
Notify(PSTR("\r\nResetRecovery\r\n"), 0x80);
|
||||
Notify(PSTR("-----------------\r\n"), 0x80);
|
||||
|
||||
DELAY(6);
|
||||
Reset();
|
||||
DELAY(6);
|
||||
ClearEpHalt(epDataInIndex);
|
||||
DELAY(6);
|
||||
bLastUsbError = ClearEpHalt(epDataOutIndex);
|
||||
DELAY(6);
|
||||
return bLastUsbError;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* Clear all EP data and clear all LUN status
|
||||
*/
|
||||
void BulkOnly::ClearAllEP() {
|
||||
for(uint8_t i = 0; i < MASS_MAX_ENDPOINTS; i++) {
|
||||
epInfo[i].epAddr = 0;
|
||||
epInfo[i].maxPktSize = (i) ? 0 : 8;
|
||||
epInfo[i].epAttribs = 0;
|
||||
|
||||
epInfo[i].bmNakPower = USB_NAK_DEFAULT;
|
||||
}
|
||||
|
||||
for(uint8_t i = 0; i < MASS_MAX_SUPPORTED_LUN; i++) {
|
||||
LUNOk[i] = false;
|
||||
WriteOk[i] = false;
|
||||
CurrentCapacity[i] = 0lu;
|
||||
CurrentSectorSize[i] = 0;
|
||||
}
|
||||
|
||||
bIface = 0;
|
||||
bNumEP = 1;
|
||||
bAddress = 0;
|
||||
qNextPollTime = 0;
|
||||
bPollEnable = false;
|
||||
bLastUsbError = 0;
|
||||
bMaxLUN = 0;
|
||||
bTheLUN = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param pcsw
|
||||
* @param pcbw
|
||||
* @return
|
||||
*/
|
||||
bool BulkOnly::IsValidCSW(CommandStatusWrapper *pcsw, CommandBlockWrapperBase *pcbw) {
|
||||
if(pcsw->dCSWSignature != MASS_CSW_SIGNATURE) {
|
||||
Notify(PSTR("CSW:Sig error\r\n"), 0x80);
|
||||
return false;
|
||||
}
|
||||
if(pcsw->dCSWTag != pcbw->dCBWTag) {
|
||||
Notify(PSTR("CSW:Wrong tag\r\n"), 0x80);
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param error
|
||||
* @param index
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::HandleUsbError(uint8_t error, uint8_t index) {
|
||||
uint8_t count = 3;
|
||||
|
||||
bLastUsbError = error;
|
||||
//if (error)
|
||||
//ClearEpHalt(index);
|
||||
while(error && count) {
|
||||
if(error != hrSUCCESS) {
|
||||
ErrorMessage<uint8_t > (PSTR("USB Error"), error);
|
||||
ErrorMessage<uint8_t > (PSTR("Index"), index);
|
||||
}
|
||||
switch(error) {
|
||||
// case hrWRONGPID:
|
||||
case hrSUCCESS:
|
||||
return MASS_ERR_SUCCESS;
|
||||
case hrBUSY:
|
||||
// SIE is busy, just hang out and try again.
|
||||
return MASS_ERR_UNIT_BUSY;
|
||||
case hrTIMEOUT:
|
||||
case hrJERR: return MASS_ERR_DEVICE_DISCONNECTED;
|
||||
case hrSTALL:
|
||||
if(index == 0)
|
||||
return MASS_ERR_STALL;
|
||||
ClearEpHalt(index);
|
||||
if(index != epDataInIndex)
|
||||
return MASS_ERR_WRITE_STALL;
|
||||
return MASS_ERR_STALL;
|
||||
|
||||
case hrNAK:
|
||||
if(index == 0)
|
||||
return MASS_ERR_UNIT_BUSY;
|
||||
return MASS_ERR_UNIT_BUSY;
|
||||
|
||||
case hrTOGERR:
|
||||
// Handle a very super rare corner case, where toggles become de-synched.
|
||||
// I have only ran into one device that has this firmware bug, and this is
|
||||
// the only clean way to get back into sync with the buggy device firmware.
|
||||
// --AJK
|
||||
if(bAddress && bConfNum) {
|
||||
error = pUsb->setConf(bAddress, 0, bConfNum);
|
||||
|
||||
if(error)
|
||||
break;
|
||||
}
|
||||
return MASS_ERR_SUCCESS;
|
||||
default:
|
||||
ErrorMessage<uint8_t > (PSTR("\r\nUSB"), error);
|
||||
return MASS_ERR_GENERAL_USB_ERROR;
|
||||
}
|
||||
count--;
|
||||
} // while
|
||||
|
||||
return ((error && !count) ? MASS_ERR_GENERAL_USB_ERROR : MASS_ERR_SUCCESS);
|
||||
}
|
||||
|
||||
#if MS_WANT_PARSER
|
||||
|
||||
uint8_t BulkOnly::Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf) {
|
||||
return Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf, 0);
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param pcbw
|
||||
* @param buf_size
|
||||
* @param buf
|
||||
* @param flags
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf
|
||||
#if MS_WANT_PARSER
|
||||
, uint8_t flags
|
||||
#endif
|
||||
) {
|
||||
|
||||
#if MS_WANT_PARSER
|
||||
uint16_t bytes = (pcbw->dCBWDataTransferLength > buf_size) ? buf_size : pcbw->dCBWDataTransferLength;
|
||||
printf("Transfersize %i\r\n", bytes);
|
||||
DELAY(1000);
|
||||
|
||||
boolean callback = (flags & MASS_TRANS_FLG_CALLBACK) == MASS_TRANS_FLG_CALLBACK;
|
||||
#else
|
||||
uint16_t bytes = buf_size;
|
||||
#endif
|
||||
boolean write = (pcbw->bmCBWFlags & MASS_CMD_DIR_IN) != MASS_CMD_DIR_IN;
|
||||
uint8_t ret = 0;
|
||||
uint8_t usberr;
|
||||
CommandStatusWrapper csw; // up here, we allocate ahead to save cpu cycles.
|
||||
SetCurLUN(pcbw->bmCBWLUN);
|
||||
ErrorMessage<uint32_t > (PSTR("CBW.dCBWTag"), pcbw->dCBWTag);
|
||||
|
||||
while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, sizeof (CommandBlockWrapper), (uint8_t*)pcbw)) == hrBUSY) DELAY(1);
|
||||
|
||||
ret = HandleUsbError(usberr, epDataOutIndex);
|
||||
//ret = HandleUsbError(pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, sizeof (CommandBlockWrapper), (uint8_t*)pcbw), epDataOutIndex);
|
||||
if(ret) {
|
||||
ErrorMessage<uint8_t > (PSTR("============================ CBW"), ret);
|
||||
} else {
|
||||
if(bytes) {
|
||||
if(!write) {
|
||||
#if MS_WANT_PARSER
|
||||
if(callback) {
|
||||
uint8_t rbuf[bytes];
|
||||
while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, rbuf)) == hrBUSY) DELAY(1);
|
||||
if(usberr == hrSUCCESS) ((USBReadParser*)buf)->Parse(bytes, rbuf, 0);
|
||||
} else {
|
||||
#endif
|
||||
while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*)buf)) == hrBUSY) DELAY(1);
|
||||
#if MS_WANT_PARSER
|
||||
|
||||
}
|
||||
#endif
|
||||
ret = HandleUsbError(usberr, epDataInIndex);
|
||||
} else {
|
||||
while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, bytes, (uint8_t*)buf)) == hrBUSY) DELAY(1);
|
||||
ret = HandleUsbError(usberr, epDataOutIndex);
|
||||
}
|
||||
if(ret) {
|
||||
ErrorMessage<uint8_t > (PSTR("============================ DAT"), ret);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
{
|
||||
bytes = sizeof (CommandStatusWrapper);
|
||||
int tries = 2;
|
||||
while(tries--) {
|
||||
while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*) & csw)) == hrBUSY) DELAY(1);
|
||||
if(!usberr) break;
|
||||
ClearEpHalt(epDataInIndex);
|
||||
if(tries) ResetRecovery();
|
||||
}
|
||||
if(!ret) {
|
||||
Notify(PSTR("CBW:\t\tOK\r\n"), 0x80);
|
||||
Notify(PSTR("Data Stage:\tOK\r\n"), 0x80);
|
||||
} else {
|
||||
// Throw away csw, IT IS NOT OF ANY USE.
|
||||
ResetRecovery();
|
||||
return ret;
|
||||
}
|
||||
ret = HandleUsbError(usberr, epDataInIndex);
|
||||
if(ret) {
|
||||
ErrorMessage<uint8_t > (PSTR("============================ CSW"), ret);
|
||||
}
|
||||
if(usberr == hrSUCCESS) {
|
||||
if(IsValidCSW(&csw, pcbw)) {
|
||||
//ErrorMessage<uint32_t > (PSTR("CSW.dCBWTag"), csw.dCSWTag);
|
||||
//ErrorMessage<uint8_t > (PSTR("bCSWStatus"), csw.bCSWStatus);
|
||||
//ErrorMessage<uint32_t > (PSTR("dCSWDataResidue"), csw.dCSWDataResidue);
|
||||
Notify(PSTR("CSW:\t\tOK\r\n\r\n"), 0x80);
|
||||
return csw.bCSWStatus;
|
||||
} else {
|
||||
// NOTE! Sometimes this is caused by the reported residue being wrong.
|
||||
// Get a different device. It isn't compliant, and should have never passed Q&A.
|
||||
// I own one... 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter.
|
||||
// Other devices that exhibit this behavior exist in the wild too.
|
||||
// Be sure to check quirks in the Linux source code before reporting a bug. --xxxajk
|
||||
Notify(PSTR("Invalid CSW\r\n"), 0x80);
|
||||
ResetRecovery();
|
||||
//return MASS_ERR_SUCCESS;
|
||||
return MASS_ERR_INVALID_CSW;
|
||||
}
|
||||
}
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param lun Logical Unit Number
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::SetCurLUN(uint8_t lun) {
|
||||
if(lun > bMaxLUN)
|
||||
return MASS_ERR_INVALID_LUN;
|
||||
bTheLUN = lun;
|
||||
return MASS_ERR_SUCCESS;
|
||||
};
|
||||
|
||||
/**
|
||||
* For driver use only.
|
||||
*
|
||||
* @param status
|
||||
* @return
|
||||
*/
|
||||
uint8_t BulkOnly::HandleSCSIError(uint8_t status) {
|
||||
uint8_t ret = 0;
|
||||
|
||||
switch(status) {
|
||||
case 0: return MASS_ERR_SUCCESS;
|
||||
|
||||
case 2:
|
||||
ErrorMessage<uint8_t > (PSTR("Phase Error"), status);
|
||||
ErrorMessage<uint8_t > (PSTR("LUN"), bTheLUN);
|
||||
ResetRecovery();
|
||||
return MASS_ERR_GENERAL_SCSI_ERROR;
|
||||
|
||||
case 1:
|
||||
ErrorMessage<uint8_t > (PSTR("SCSI Error"), status);
|
||||
ErrorMessage<uint8_t > (PSTR("LUN"), bTheLUN);
|
||||
RequestSenseResponce rsp;
|
||||
|
||||
ret = RequestSense(bTheLUN, sizeof (RequestSenseResponce), (uint8_t*) & rsp);
|
||||
|
||||
if(ret) {
|
||||
return MASS_ERR_GENERAL_SCSI_ERROR;
|
||||
}
|
||||
ErrorMessage<uint8_t > (PSTR("Response Code"), rsp.bResponseCode);
|
||||
if(rsp.bResponseCode & 0x80) {
|
||||
Notify(PSTR("Information field: "), 0x80);
|
||||
for(int i = 0; i < 4; i++) {
|
||||
D_PrintHex<uint8_t > (rsp.CmdSpecificInformation[i], 0x80);
|
||||
Notify(PSTR(" "), 0x80);
|
||||
}
|
||||
Notify(PSTR("\r\n"), 0x80);
|
||||
}
|
||||
ErrorMessage<uint8_t > (PSTR("Sense Key"), rsp.bmSenseKey);
|
||||
ErrorMessage<uint8_t > (PSTR("Add Sense Code"), rsp.bAdditionalSenseCode);
|
||||
ErrorMessage<uint8_t > (PSTR("Add Sense Qual"), rsp.bAdditionalSenseQualifier);
|
||||
// warning, this is not testing ASQ, only SK and ASC.
|
||||
switch(rsp.bmSenseKey) {
|
||||
case SCSI_S_UNIT_ATTENTION:
|
||||
switch(rsp.bAdditionalSenseCode) {
|
||||
case SCSI_ASC_MEDIA_CHANGED:
|
||||
return MASS_ERR_MEDIA_CHANGED;
|
||||
default:
|
||||
return MASS_ERR_UNIT_NOT_READY;
|
||||
}
|
||||
case SCSI_S_NOT_READY:
|
||||
switch(rsp.bAdditionalSenseCode) {
|
||||
case SCSI_ASC_MEDIUM_NOT_PRESENT:
|
||||
return MASS_ERR_NO_MEDIA;
|
||||
default:
|
||||
return MASS_ERR_UNIT_NOT_READY;
|
||||
}
|
||||
case SCSI_S_ILLEGAL_REQUEST:
|
||||
switch(rsp.bAdditionalSenseCode) {
|
||||
case SCSI_ASC_LBA_OUT_OF_RANGE:
|
||||
return MASS_ERR_BAD_LBA;
|
||||
default:
|
||||
return MASS_ERR_CMD_NOT_SUPPORTED;
|
||||
}
|
||||
default:
|
||||
return MASS_ERR_GENERAL_SCSI_ERROR;
|
||||
}
|
||||
|
||||
// case 4: return MASS_ERR_UNIT_BUSY; // Busy means retry later.
|
||||
// case 0x05/0x14: we stalled out
|
||||
// case 0x15/0x16: we naked out.
|
||||
default:
|
||||
ErrorMessage<uint8_t > (PSTR("Gen SCSI Err"), status);
|
||||
ErrorMessage<uint8_t > (PSTR("LUN"), bTheLUN);
|
||||
return status;
|
||||
} // switch
|
||||
}
|
||||
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
// Debugging code
|
||||
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
/**
|
||||
*
|
||||
* @param ep_ptr
|
||||
*/
|
||||
void BulkOnly::PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR * ep_ptr) {
|
||||
Notify(PSTR("Endpoint descriptor:"), 0x80);
|
||||
Notify(PSTR("\r\nLength:\t\t"), 0x80);
|
||||
D_PrintHex<uint8_t > (ep_ptr->bLength, 0x80);
|
||||
Notify(PSTR("\r\nType:\t\t"), 0x80);
|
||||
D_PrintHex<uint8_t > (ep_ptr->bDescriptorType, 0x80);
|
||||
Notify(PSTR("\r\nAddress:\t"), 0x80);
|
||||
D_PrintHex<uint8_t > (ep_ptr->bEndpointAddress, 0x80);
|
||||
Notify(PSTR("\r\nAttributes:\t"), 0x80);
|
||||
D_PrintHex<uint8_t > (ep_ptr->bmAttributes, 0x80);
|
||||
Notify(PSTR("\r\nMaxPktSize:\t"), 0x80);
|
||||
D_PrintHex<uint16_t > (ep_ptr->wMaxPacketSize, 0x80);
|
||||
Notify(PSTR("\r\nPoll Intrv:\t"), 0x80);
|
||||
D_PrintHex<uint8_t > (ep_ptr->bInterval, 0x80);
|
||||
Notify(PSTR("\r\n"), 0x80);
|
||||
}
|
||||
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
// misc/to kill/to-do
|
||||
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
/* We won't be needing this... */
|
||||
uint8_t BulkOnly::Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, USBReadParser * prs) {
|
||||
#if MS_WANT_PARSER
|
||||
if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA;
|
||||
Notify(PSTR("\r\nRead (With parser)\r\n"), 0x80);
|
||||
Notify(PSTR("---------\r\n"), 0x80);
|
||||
|
||||
CommandBlockWrapper cbw = CommandBlockWrapper();
|
||||
|
||||
cbw.dCBWSignature = MASS_CBW_SIGNATURE;
|
||||
cbw.dCBWTag = ++dCBWTag;
|
||||
cbw.dCBWDataTransferLength = ((uint32_t)bsize * blocks);
|
||||
cbw.bmCBWFlags = MASS_CMD_DIR_IN,
|
||||
cbw.bmCBWLUN = lun;
|
||||
cbw.bmCBWCBLength = 10;
|
||||
|
||||
cbw.CBWCB[0] = SCSI_CMD_READ_10;
|
||||
cbw.CBWCB[8] = blocks;
|
||||
cbw.CBWCB[2] = ((addr >> 24) & 0xff);
|
||||
cbw.CBWCB[3] = ((addr >> 16) & 0xff);
|
||||
cbw.CBWCB[4] = ((addr >> 8) & 0xff);
|
||||
cbw.CBWCB[5] = (addr & 0xff);
|
||||
|
||||
return HandleSCSIError(Transaction(&cbw, bsize, prs, 1));
|
||||
#else
|
||||
return MASS_ERR_NOT_IMPLEMENTED;
|
||||
#endif
|
||||
}
|
||||
@ -0,0 +1,571 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#if !defined(__MASSTORAGE_H__)
|
||||
#define __MASSTORAGE_H__
|
||||
|
||||
// Cruft removal, makes driver smaller, faster.
|
||||
#ifndef MS_WANT_PARSER
|
||||
#define MS_WANT_PARSER 0
|
||||
#endif
|
||||
|
||||
#include "Usb.h"
|
||||
|
||||
#define bmREQ_MASSOUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
|
||||
#define bmREQ_MASSIN USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
|
||||
|
||||
// Mass Storage Subclass Constants
|
||||
#define MASS_SUBCLASS_SCSI_NOT_REPORTED 0x00 // De facto use
|
||||
#define MASS_SUBCLASS_RBC 0x01
|
||||
#define MASS_SUBCLASS_ATAPI 0x02 // MMC-5 (ATAPI)
|
||||
#define MASS_SUBCLASS_OBSOLETE1 0x03 // Was QIC-157
|
||||
#define MASS_SUBCLASS_UFI 0x04 // Specifies how to interface Floppy Disk Drives to USB
|
||||
#define MASS_SUBCLASS_OBSOLETE2 0x05 // Was SFF-8070i
|
||||
#define MASS_SUBCLASS_SCSI 0x06 // SCSI Transparent Command Set
|
||||
#define MASS_SUBCLASS_LSDFS 0x07 // Specifies how host has to negotiate access before trying SCSI
|
||||
#define MASS_SUBCLASS_IEEE1667 0x08
|
||||
|
||||
// Mass Storage Class Protocols
|
||||
#define MASS_PROTO_CBI 0x00 // CBI (with command completion interrupt)
|
||||
#define MASS_PROTO_CBI_NO_INT 0x01 // CBI (without command completion interrupt)
|
||||
#define MASS_PROTO_OBSOLETE 0x02
|
||||
#define MASS_PROTO_BBB 0x50 // Bulk Only Transport
|
||||
#define MASS_PROTO_UAS 0x62
|
||||
|
||||
// Request Codes
|
||||
#define MASS_REQ_ADSC 0x00
|
||||
#define MASS_REQ_GET 0xFC
|
||||
#define MASS_REQ_PUT 0xFD
|
||||
#define MASS_REQ_GET_MAX_LUN 0xFE
|
||||
#define MASS_REQ_BOMSR 0xFF // Bulk-Only Mass Storage Reset
|
||||
|
||||
#define MASS_CBW_SIGNATURE 0x43425355
|
||||
#define MASS_CSW_SIGNATURE 0x53425355
|
||||
|
||||
#define MASS_CMD_DIR_OUT 0 // (0 << 7)
|
||||
#define MASS_CMD_DIR_IN 0x80 //(1 << 7)
|
||||
|
||||
/*
|
||||
* Reference documents from T10 (http://www.t10.org)
|
||||
* SCSI Primary Commands - 3 (SPC-3)
|
||||
* SCSI Block Commands - 2 (SBC-2)
|
||||
* Multi-Media Commands - 5 (MMC-5)
|
||||
*/
|
||||
|
||||
/* Group 1 commands (CDB's here are should all be 6-bytes) */
|
||||
#define SCSI_CMD_TEST_UNIT_READY 0x00
|
||||
#define SCSI_CMD_REQUEST_SENSE 0x03
|
||||
#define SCSI_CMD_FORMAT_UNIT 0x04
|
||||
#define SCSI_CMD_READ_6 0x08
|
||||
#define SCSI_CMD_WRITE_6 0x0A
|
||||
#define SCSI_CMD_INQUIRY 0x12
|
||||
#define SCSI_CMD_MODE_SELECT_6 0x15
|
||||
#define SCSI_CMD_MODE_SENSE_6 0x1A
|
||||
#define SCSI_CMD_START_STOP_UNIT 0x1B
|
||||
#define SCSI_CMD_PREVENT_REMOVAL 0x1E
|
||||
/* Group 2 Commands (CDB's here are 10-bytes) */
|
||||
#define SCSI_CMD_READ_FORMAT_CAPACITIES 0x23
|
||||
#define SCSI_CMD_READ_CAPACITY_10 0x25
|
||||
#define SCSI_CMD_READ_10 0x28
|
||||
#define SCSI_CMD_WRITE_10 0x2A
|
||||
#define SCSI_CMD_SEEK_10 0x2B
|
||||
#define SCSI_CMD_ERASE_10 0x2C
|
||||
#define SCSI_CMD_WRITE_AND_VERIFY_10 0x2E
|
||||
#define SCSI_CMD_VERIFY_10 0x2F
|
||||
#define SCSI_CMD_SYNCHRONIZE_CACHE 0x35
|
||||
#define SCSI_CMD_WRITE_BUFFER 0x3B
|
||||
#define SCSI_CMD_READ_BUFFER 0x3C
|
||||
#define SCSI_CMD_READ_SUBCHANNEL 0x42
|
||||
#define SCSI_CMD_READ_TOC 0x43
|
||||
#define SCSI_CMD_READ_HEADER 0x44
|
||||
#define SCSI_CMD_PLAY_AUDIO_10 0x45
|
||||
#define SCSI_CMD_GET_CONFIGURATION 0x46
|
||||
#define SCSI_CMD_PLAY_AUDIO_MSF 0x47
|
||||
#define SCSI_CMD_PLAY_AUDIO_TI 0x48
|
||||
#define SCSI_CMD_PLAY_TRACK_REL_10 0x49
|
||||
#define SCSI_CMD_GET_EVENT_STATUS 0x4A
|
||||
#define SCSI_CMD_PAUSE_RESUME 0x4B
|
||||
#define SCSI_CMD_READ_DISC_INFORMATION 0x51
|
||||
#define SCSI_CMD_READ_TRACK_INFORMATION 0x52
|
||||
#define SCSI_CMD_RESERVE_TRACK 0x53
|
||||
#define SCSI_CMD_SEND_OPC_INFORMATION 0x54
|
||||
#define SCSI_CMD_MODE_SELECT_10 0x55
|
||||
#define SCSI_CMD_REPAIR_TRACK 0x58
|
||||
#define SCSI_CMD_MODE_SENSE_10 0x5A
|
||||
#define SCSI_CMD_CLOSE_TRACK_SESSION 0x5B
|
||||
#define SCSI_CMD_READ_BUFFER_CAPACITY 0x5C
|
||||
#define SCSI_CMD_SEND_CUE_SHEET 0x5D
|
||||
/* Group 5 Commands (CDB's here are 12-bytes) */
|
||||
#define SCSI_CMD_REPORT_LUNS 0xA0
|
||||
#define SCSI_CMD_BLANK 0xA1
|
||||
#define SCSI_CMD_SECURITY_PROTOCOL_IN 0xA2
|
||||
#define SCSI_CMD_SEND_KEY 0xA3
|
||||
#define SCSI_CMD_REPORT_KEY 0xA4
|
||||
#define SCSI_CMD_PLAY_AUDIO_12 0xA5
|
||||
#define SCSI_CMD_LOAD_UNLOAD 0xA6
|
||||
#define SCSI_CMD_SET_READ_AHEAD 0xA7
|
||||
#define SCSI_CMD_READ_12 0xA8
|
||||
#define SCSI_CMD_PLAY_TRACK_REL_12 0xA9
|
||||
#define SCSI_CMD_WRITE_12 0xAA
|
||||
#define SCSI_CMD_READ_MEDIA_SERIAL_12 0xAB
|
||||
#define SCSI_CMD_GET_PERFORMANCE 0xAC
|
||||
#define SCSI_CMD_READ_DVD_STRUCTURE 0xAD
|
||||
#define SCSI_CMD_SECURITY_PROTOCOL_OUT 0xB5
|
||||
#define SCSI_CMD_SET_STREAMING 0xB6
|
||||
#define SCSI_CMD_READ_MSF 0xB9
|
||||
#define SCSI_CMD_SET_SPEED 0xBB
|
||||
#define SCSI_CMD_MECHANISM_STATUS 0xBD
|
||||
#define SCSI_CMD_READ_CD 0xBE
|
||||
#define SCSI_CMD_SEND_DISC_STRUCTURE 0xBF
|
||||
/* Vendor-unique Commands, included for completeness */
|
||||
#define SCSI_CMD_CD_PLAYBACK_STATUS 0xC4 /* SONY unique */
|
||||
#define SCSI_CMD_PLAYBACK_CONTROL 0xC9 /* SONY unique */
|
||||
#define SCSI_CMD_READ_CDDA 0xD8 /* Vendor unique */
|
||||
#define SCSI_CMD_READ_CDXA 0xDB /* Vendor unique */
|
||||
#define SCSI_CMD_READ_ALL_SUBCODES 0xDF /* Vendor unique */
|
||||
|
||||
/* SCSI error codes */
|
||||
#define SCSI_S_NOT_READY 0x02
|
||||
#define SCSI_S_MEDIUM_ERROR 0x03
|
||||
#define SCSI_S_ILLEGAL_REQUEST 0x05
|
||||
#define SCSI_S_UNIT_ATTENTION 0x06
|
||||
#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21
|
||||
#define SCSI_ASC_MEDIA_CHANGED 0x28
|
||||
#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A
|
||||
|
||||
/* USB error codes */
|
||||
#define MASS_ERR_SUCCESS 0x00
|
||||
#define MASS_ERR_PHASE_ERROR 0x02
|
||||
#define MASS_ERR_UNIT_NOT_READY 0x03
|
||||
#define MASS_ERR_UNIT_BUSY 0x04
|
||||
#define MASS_ERR_STALL 0x05
|
||||
#define MASS_ERR_CMD_NOT_SUPPORTED 0x06
|
||||
#define MASS_ERR_INVALID_CSW 0x07
|
||||
#define MASS_ERR_NO_MEDIA 0x08
|
||||
#define MASS_ERR_BAD_LBA 0x09
|
||||
#define MASS_ERR_MEDIA_CHANGED 0x0A
|
||||
#define MASS_ERR_DEVICE_DISCONNECTED 0x11
|
||||
#define MASS_ERR_UNABLE_TO_RECOVER 0x12 // Reset recovery error
|
||||
#define MASS_ERR_INVALID_LUN 0x13
|
||||
#define MASS_ERR_WRITE_STALL 0x14
|
||||
#define MASS_ERR_READ_NAKS 0x15
|
||||
#define MASS_ERR_WRITE_NAKS 0x16
|
||||
#define MASS_ERR_WRITE_PROTECTED 0x17
|
||||
#define MASS_ERR_NOT_IMPLEMENTED 0xFD
|
||||
#define MASS_ERR_GENERAL_SCSI_ERROR 0xFE
|
||||
#define MASS_ERR_GENERAL_USB_ERROR 0xFF
|
||||
#define MASS_ERR_USER 0xA0 // For subclasses to define their own error codes
|
||||
|
||||
#define MASS_TRANS_FLG_CALLBACK 0x01 // Callback is involved
|
||||
#define MASS_TRANS_FLG_NO_STALL_CHECK 0x02 // STALL condition is not checked
|
||||
#define MASS_TRANS_FLG_NO_PHASE_CHECK 0x04 // PHASE_ERROR is not checked
|
||||
|
||||
#define MASS_MAX_ENDPOINTS 3
|
||||
|
||||
struct Capacity {
|
||||
uint8_t data[8];
|
||||
//uint32_t dwBlockAddress;
|
||||
//uint32_t dwBlockLength;
|
||||
} __attribute__((packed));
|
||||
|
||||
struct BASICCDB {
|
||||
uint8_t Opcode;
|
||||
|
||||
unsigned unused : 5;
|
||||
unsigned LUN : 3;
|
||||
|
||||
uint8_t info[12];
|
||||
} __attribute__((packed));
|
||||
|
||||
typedef BASICCDB BASICCDB_t;
|
||||
|
||||
struct CDB6 {
|
||||
uint8_t Opcode;
|
||||
|
||||
unsigned LBAMSB : 5;
|
||||
unsigned LUN : 3;
|
||||
|
||||
uint8_t LBAHB;
|
||||
uint8_t LBALB;
|
||||
uint8_t AllocationLength;
|
||||
uint8_t Control;
|
||||
|
||||
public:
|
||||
|
||||
CDB6(uint8_t _Opcode, uint8_t _LUN, uint32_t LBA, uint8_t _AllocationLength, uint8_t _Control) :
|
||||
Opcode(_Opcode), LBAMSB(BGRAB2(LBA) & 0x1f), LUN(_LUN), LBAHB(BGRAB1(LBA)), LBALB(BGRAB0(LBA)),
|
||||
AllocationLength(_AllocationLength), Control(_Control) {
|
||||
}
|
||||
|
||||
CDB6(uint8_t _Opcode, uint8_t _LUN, uint8_t _AllocationLength, uint8_t _Control) :
|
||||
Opcode(_Opcode), LBAMSB(0), LUN(_LUN), LBAHB(0), LBALB(0),
|
||||
AllocationLength(_AllocationLength), Control(_Control) {
|
||||
}
|
||||
} __attribute__((packed));
|
||||
|
||||
typedef CDB6 CDB6_t;
|
||||
|
||||
struct CDB10 {
|
||||
uint8_t Opcode;
|
||||
|
||||
unsigned Service_Action : 5;
|
||||
unsigned LUN : 3;
|
||||
|
||||
uint8_t LBA_L_M_MB;
|
||||
uint8_t LBA_L_M_LB;
|
||||
uint8_t LBA_L_L_MB;
|
||||
uint8_t LBA_L_L_LB;
|
||||
|
||||
uint8_t Misc2;
|
||||
|
||||
uint8_t ALC_MB;
|
||||
uint8_t ALC_LB;
|
||||
|
||||
uint8_t Control;
|
||||
public:
|
||||
|
||||
CDB10(uint8_t _Opcode, uint8_t _LUN) :
|
||||
Opcode(_Opcode), Service_Action(0), LUN(_LUN),
|
||||
LBA_L_M_MB(0), LBA_L_M_LB(0), LBA_L_L_MB(0), LBA_L_L_LB(0),
|
||||
Misc2(0), ALC_MB(0), ALC_LB(0), Control(0) {
|
||||
}
|
||||
|
||||
CDB10(uint8_t _Opcode, uint8_t _LUN, uint16_t xflen, uint32_t _LBA) :
|
||||
Opcode(_Opcode), Service_Action(0), LUN(_LUN),
|
||||
LBA_L_M_MB(BGRAB3(_LBA)), LBA_L_M_LB(BGRAB2(_LBA)), LBA_L_L_MB(BGRAB1(_LBA)), LBA_L_L_LB(BGRAB0(_LBA)),
|
||||
Misc2(0), ALC_MB(BGRAB1(xflen)), ALC_LB(BGRAB0(xflen)), Control(0) {
|
||||
}
|
||||
} __attribute__((packed));
|
||||
|
||||
typedef CDB10 CDB10_t;
|
||||
|
||||
struct CDB12 {
|
||||
uint8_t Opcode;
|
||||
|
||||
unsigned Service_Action : 5;
|
||||
unsigned Misc : 3;
|
||||
|
||||
uint8_t LBA_L_M_LB;
|
||||
uint8_t LBA_L_L_MB;
|
||||
uint8_t LBA_L_L_LB;
|
||||
|
||||
uint8_t ALC_M_LB;
|
||||
uint8_t ALC_L_MB;
|
||||
uint8_t ALC_L_LB;
|
||||
uint8_t Control;
|
||||
} __attribute__((packed));
|
||||
|
||||
typedef CDB12 CDB12_t;
|
||||
|
||||
struct CDB_LBA32_16 {
|
||||
uint8_t Opcode;
|
||||
|
||||
unsigned Service_Action : 5;
|
||||
unsigned Misc : 3;
|
||||
|
||||
uint8_t LBA_L_M_MB;
|
||||
uint8_t LBA_L_M_LB;
|
||||
uint8_t LBA_L_L_MB;
|
||||
uint8_t LBA_L_L_LB;
|
||||
|
||||
uint8_t A_M_M_MB;
|
||||
uint8_t A_M_M_LB;
|
||||
uint8_t A_M_L_MB;
|
||||
uint8_t A_M_L_LB;
|
||||
|
||||
uint8_t ALC_M_MB;
|
||||
uint8_t ALC_M_LB;
|
||||
uint8_t ALC_L_MB;
|
||||
uint8_t ALC_L_LB;
|
||||
|
||||
uint8_t Misc2;
|
||||
uint8_t Control;
|
||||
} __attribute__((packed));
|
||||
|
||||
struct CDB_LBA64_16 {
|
||||
uint8_t Opcode;
|
||||
uint8_t Misc;
|
||||
|
||||
uint8_t LBA_M_M_MB;
|
||||
uint8_t LBA_M_M_LB;
|
||||
uint8_t LBA_M_L_MB;
|
||||
uint8_t LBA_M_L_LB;
|
||||
|
||||
uint8_t LBA_L_M_MB;
|
||||
uint8_t LBA_L_M_LB;
|
||||
uint8_t LBA_L_L_MB;
|
||||
uint8_t LBA_L_L_LB;
|
||||
|
||||
uint8_t ALC_M_MB;
|
||||
uint8_t ALC_M_LB;
|
||||
uint8_t ALC_L_MB;
|
||||
uint8_t ALC_L_LB;
|
||||
|
||||
uint8_t Misc2;
|
||||
uint8_t Control;
|
||||
} __attribute__((packed));
|
||||
|
||||
struct InquiryResponse {
|
||||
uint8_t DeviceType : 5;
|
||||
uint8_t PeripheralQualifier : 3;
|
||||
|
||||
unsigned Reserved : 7;
|
||||
unsigned Removable : 1;
|
||||
|
||||
uint8_t Version;
|
||||
|
||||
unsigned ResponseDataFormat : 4;
|
||||
unsigned HISUP : 1;
|
||||
unsigned NormACA : 1;
|
||||
unsigned TrmTsk : 1;
|
||||
unsigned AERC : 1;
|
||||
|
||||
uint8_t AdditionalLength;
|
||||
//uint8_t Reserved3[2];
|
||||
|
||||
unsigned PROTECT : 1;
|
||||
unsigned Res : 2;
|
||||
unsigned ThreePC : 1;
|
||||
unsigned TPGS : 2;
|
||||
unsigned ACC : 1;
|
||||
unsigned SCCS : 1;
|
||||
|
||||
unsigned ADDR16 : 1;
|
||||
unsigned R1 : 1;
|
||||
unsigned R2 : 1;
|
||||
unsigned MCHNGR : 1;
|
||||
unsigned MULTIP : 1;
|
||||
unsigned VS : 1;
|
||||
unsigned ENCSERV : 1;
|
||||
unsigned BQUE : 1;
|
||||
|
||||
unsigned SoftReset : 1;
|
||||
unsigned CmdQue : 1;
|
||||
unsigned Reserved4 : 1;
|
||||
unsigned Linked : 1;
|
||||
unsigned Sync : 1;
|
||||
unsigned WideBus16Bit : 1;
|
||||
unsigned WideBus32Bit : 1;
|
||||
unsigned RelAddr : 1;
|
||||
|
||||
uint8_t VendorID[8];
|
||||
uint8_t ProductID[16];
|
||||
uint8_t RevisionID[4];
|
||||
} __attribute__((packed));
|
||||
|
||||
struct CommandBlockWrapperBase {
|
||||
uint32_t dCBWSignature;
|
||||
uint32_t dCBWTag;
|
||||
uint32_t dCBWDataTransferLength;
|
||||
uint8_t bmCBWFlags;
|
||||
public:
|
||||
|
||||
CommandBlockWrapperBase() {
|
||||
}
|
||||
|
||||
CommandBlockWrapperBase(uint32_t tag, uint32_t xflen, uint8_t flgs) :
|
||||
dCBWSignature(MASS_CBW_SIGNATURE), dCBWTag(tag), dCBWDataTransferLength(xflen), bmCBWFlags(flgs) {
|
||||
}
|
||||
} __attribute__((packed));
|
||||
|
||||
struct CommandBlockWrapper : public CommandBlockWrapperBase {
|
||||
|
||||
struct {
|
||||
uint8_t bmCBWLUN : 4;
|
||||
uint8_t bmReserved1 : 4;
|
||||
};
|
||||
|
||||
struct {
|
||||
uint8_t bmCBWCBLength : 4;
|
||||
uint8_t bmReserved2 : 4;
|
||||
};
|
||||
|
||||
uint8_t CBWCB[16];
|
||||
|
||||
public:
|
||||
// All zeroed.
|
||||
|
||||
CommandBlockWrapper() :
|
||||
CommandBlockWrapperBase(0, 0, 0), bmReserved1(0), bmReserved2(0) {
|
||||
for(int i = 0; i < 16; i++) CBWCB[i] = 0;
|
||||
}
|
||||
|
||||
// Generic Wrap, CDB zeroed.
|
||||
|
||||
CommandBlockWrapper(uint32_t tag, uint32_t xflen, uint8_t flgs, uint8_t lu, uint8_t cmdlen, uint8_t cmd) :
|
||||
CommandBlockWrapperBase(tag, xflen, flgs),
|
||||
bmCBWLUN(lu), bmReserved1(0), bmCBWCBLength(cmdlen), bmReserved2(0) {
|
||||
for(int i = 0; i < 16; i++) CBWCB[i] = 0;
|
||||
// Type punning can cause optimization problems and bugs.
|
||||
// Using reinterpret_cast to a dreinterpretifferent object is the proper way to do this.
|
||||
//(((BASICCDB_t *) CBWCB)->LUN) = cmd;
|
||||
BASICCDB_t *x = reinterpret_cast<BASICCDB_t *>(CBWCB);
|
||||
x->LUN = cmd;
|
||||
}
|
||||
|
||||
// Wrap for CDB of 6
|
||||
|
||||
CommandBlockWrapper(uint32_t tag, uint32_t xflen, CDB6_t *cdb, uint8_t dir) :
|
||||
CommandBlockWrapperBase(tag, xflen, dir),
|
||||
bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(6), bmReserved2(0) {
|
||||
memcpy(&CBWCB, cdb, 6);
|
||||
}
|
||||
// Wrap for CDB of 10
|
||||
|
||||
CommandBlockWrapper(uint32_t tag, uint32_t xflen, CDB10_t *cdb, uint8_t dir) :
|
||||
CommandBlockWrapperBase(tag, xflen, dir),
|
||||
bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(10), bmReserved2(0) {
|
||||
memcpy(&CBWCB, cdb, 10);
|
||||
}
|
||||
} __attribute__((packed));
|
||||
|
||||
struct CommandStatusWrapper {
|
||||
uint32_t dCSWSignature;
|
||||
uint32_t dCSWTag;
|
||||
uint32_t dCSWDataResidue;
|
||||
uint8_t bCSWStatus;
|
||||
} __attribute__((packed));
|
||||
|
||||
struct RequestSenseResponce {
|
||||
uint8_t bResponseCode;
|
||||
uint8_t bSegmentNumber;
|
||||
|
||||
uint8_t bmSenseKey : 4;
|
||||
uint8_t bmReserved : 1;
|
||||
uint8_t bmILI : 1;
|
||||
uint8_t bmEOM : 1;
|
||||
uint8_t bmFileMark : 1;
|
||||
|
||||
uint8_t Information[4];
|
||||
uint8_t bAdditionalLength;
|
||||
uint8_t CmdSpecificInformation[4];
|
||||
uint8_t bAdditionalSenseCode;
|
||||
uint8_t bAdditionalSenseQualifier;
|
||||
uint8_t bFieldReplaceableUnitCode;
|
||||
uint8_t SenseKeySpecific[3];
|
||||
} __attribute__((packed));
|
||||
|
||||
class BulkOnly : public USBDeviceConfig, public UsbConfigXtracter {
|
||||
protected:
|
||||
static const uint8_t epDataInIndex; // DataIn endpoint index
|
||||
static const uint8_t epDataOutIndex; // DataOUT endpoint index
|
||||
static const uint8_t epInterruptInIndex; // InterruptIN endpoint index
|
||||
|
||||
USB *pUsb;
|
||||
uint8_t bAddress;
|
||||
uint8_t bConfNum; // configuration number
|
||||
uint8_t bIface; // interface value
|
||||
uint8_t bNumEP; // total number of EP in the configuration
|
||||
uint32_t qNextPollTime; // next poll time
|
||||
bool bPollEnable; // poll enable flag
|
||||
|
||||
EpInfo epInfo[MASS_MAX_ENDPOINTS];
|
||||
|
||||
uint32_t dCBWTag; // Tag
|
||||
//uint32_t dCBWDataTransferLength; // Data Transfer Length
|
||||
uint8_t bLastUsbError; // Last USB error
|
||||
uint8_t bMaxLUN; // Max LUN
|
||||
uint8_t bTheLUN; // Active LUN
|
||||
uint32_t CurrentCapacity[MASS_MAX_SUPPORTED_LUN]; // Total sectors
|
||||
uint16_t CurrentSectorSize[MASS_MAX_SUPPORTED_LUN]; // Sector size, clipped to 16 bits
|
||||
bool LUNOk[MASS_MAX_SUPPORTED_LUN]; // use this to check for media changes.
|
||||
bool WriteOk[MASS_MAX_SUPPORTED_LUN];
|
||||
void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr);
|
||||
|
||||
|
||||
// Additional Initialization Method for Subclasses
|
||||
|
||||
virtual uint8_t OnInit() {
|
||||
return 0;
|
||||
};
|
||||
public:
|
||||
BulkOnly(USB *p);
|
||||
|
||||
uint8_t GetLastUsbError() {
|
||||
return bLastUsbError;
|
||||
};
|
||||
|
||||
uint8_t GetbMaxLUN() {
|
||||
return bMaxLUN; // Max LUN
|
||||
}
|
||||
|
||||
uint8_t GetbTheLUN() {
|
||||
return bTheLUN; // Active LUN
|
||||
}
|
||||
|
||||
boolean WriteProtected(uint8_t lun);
|
||||
uint8_t MediaCTL(uint8_t lun, uint8_t ctl);
|
||||
uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf);
|
||||
uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, USBReadParser *prs);
|
||||
uint8_t Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t *buf);
|
||||
uint8_t LockMedia(uint8_t lun, uint8_t lock);
|
||||
|
||||
bool LUNIsGood(uint8_t lun);
|
||||
uint32_t GetCapacity(uint8_t lun);
|
||||
uint16_t GetSectorSize(uint8_t lun);
|
||||
|
||||
// USBDeviceConfig implementation
|
||||
virtual uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
|
||||
virtual uint8_t ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed);
|
||||
|
||||
virtual uint8_t Release();
|
||||
virtual uint8_t Poll();
|
||||
|
||||
virtual uint8_t GetAddress() {
|
||||
return bAddress;
|
||||
};
|
||||
|
||||
// UsbConfigXtracter implementation
|
||||
virtual void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep);
|
||||
|
||||
virtual boolean DEVCLASSOK(uint8_t klass) {
|
||||
return (klass == USB_CLASS_MASS_STORAGE);
|
||||
}
|
||||
|
||||
uint8_t SCSITransaction6(CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir);
|
||||
uint8_t SCSITransaction10(CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir);
|
||||
|
||||
private:
|
||||
uint8_t Inquiry(uint8_t lun, uint16_t size, uint8_t *buf);
|
||||
uint8_t TestUnitReady(uint8_t lun);
|
||||
uint8_t RequestSense(uint8_t lun, uint16_t size, uint8_t *buf);
|
||||
uint8_t ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t *buf);
|
||||
uint8_t GetMaxLUN(uint8_t *max_lun);
|
||||
uint8_t SetCurLUN(uint8_t lun);
|
||||
void Reset();
|
||||
uint8_t ResetRecovery();
|
||||
uint8_t ReadCapacity10(uint8_t lun, uint8_t *buf);
|
||||
void ClearAllEP();
|
||||
void CheckMedia();
|
||||
boolean CheckLUN(uint8_t lun);
|
||||
uint8_t Page3F(uint8_t lun);
|
||||
bool IsValidCBW(uint8_t size, uint8_t *pcbw);
|
||||
bool IsMeaningfulCBW(uint8_t size, uint8_t *pcbw);
|
||||
|
||||
bool IsValidCSW(CommandStatusWrapper *pcsw, CommandBlockWrapperBase *pcbw);
|
||||
|
||||
uint8_t ClearEpHalt(uint8_t index);
|
||||
#if MS_WANT_PARSER
|
||||
uint8_t Transaction(CommandBlockWrapper *cbw, uint16_t bsize, void *buf, uint8_t flags);
|
||||
#endif
|
||||
uint8_t Transaction(CommandBlockWrapper *cbw, uint16_t bsize, void *buf);
|
||||
uint8_t HandleUsbError(uint8_t error, uint8_t index);
|
||||
uint8_t HandleSCSIError(uint8_t status);
|
||||
|
||||
};
|
||||
|
||||
#endif // __MASSTORAGE_H__
|
||||
@ -0,0 +1,233 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
#if !defined(_usb_h_) || defined(_max3421e_h_)
|
||||
#error "Never include max3421e.h directly; include Usb.h instead"
|
||||
#else
|
||||
|
||||
#define _max3421e_h_
|
||||
|
||||
/* MAX3421E register/bit names and bitmasks */
|
||||
|
||||
/* Arduino pin definitions */
|
||||
/* pin numbers to port numbers */
|
||||
|
||||
|
||||
//#define MAX_INT 9 // Duemielanove
|
||||
|
||||
//#define MAX_GPX 8
|
||||
|
||||
#define SE0 0
|
||||
#define SE1 1
|
||||
#define FSHOST 2
|
||||
#define LSHOST 3
|
||||
|
||||
/* MAX3421E command byte format: rrrrr0wa where 'r' is register number */
|
||||
//
|
||||
// MAX3421E Registers in HOST mode.
|
||||
//
|
||||
#define rRCVFIFO 0x08 //1<<3
|
||||
#define rSNDFIFO 0x10 //2<<3
|
||||
#define rSUDFIFO 0x20 //4<<3
|
||||
#define rRCVBC 0x30 //6<<3
|
||||
#define rSNDBC 0x38 //7<<3
|
||||
|
||||
#define rUSBIRQ 0x68 //13<<3
|
||||
/* USBIRQ Bits */
|
||||
#define bmVBUSIRQ 0x40 //b6
|
||||
#define bmNOVBUSIRQ 0x20 //b5
|
||||
#define bmOSCOKIRQ 0x01 //b0
|
||||
|
||||
#define rUSBIEN 0x70 //14<<3
|
||||
/* USBIEN Bits */
|
||||
#define bmVBUSIE 0x40 //b6
|
||||
#define bmNOVBUSIE 0x20 //b5
|
||||
#define bmOSCOKIE 0x01 //b0
|
||||
|
||||
#define rUSBCTL 0x78 //15<<3
|
||||
/* USBCTL Bits */
|
||||
#define bmCHIPRES 0x20 //b5
|
||||
#define bmPWRDOWN 0x10 //b4
|
||||
|
||||
#define rCPUCTL 0x80 //16<<3
|
||||
/* CPUCTL Bits */
|
||||
#define bmPUSLEWID1 0x80 //b7
|
||||
#define bmPULSEWID0 0x40 //b6
|
||||
#define bmIE 0x01 //b0
|
||||
|
||||
#define rPINCTL 0x88 //17<<3
|
||||
/* PINCTL Bits */
|
||||
#define bmFDUPSPI 0x10 //b4
|
||||
#define bmINTLEVEL 0x08 //b3
|
||||
#define bmPOSINT 0x04 //b2
|
||||
#define bmGPXB 0x02 //b1
|
||||
#define bmGPXA 0x01 //b0
|
||||
// GPX pin selections
|
||||
#define GPX_OPERATE 0x00
|
||||
#define GPX_VBDET 0x01
|
||||
#define GPX_BUSACT 0x02
|
||||
#define GPX_SOF 0x03
|
||||
|
||||
#define rREVISION 0x90 //18<<3
|
||||
|
||||
#define rIOPINS1 0xa0 //20<<3
|
||||
|
||||
/* IOPINS1 Bits */
|
||||
#define bmGPOUT0 0x01
|
||||
#define bmGPOUT1 0x02
|
||||
#define bmGPOUT2 0x04
|
||||
#define bmGPOUT3 0x08
|
||||
#define bmGPIN0 0x10
|
||||
#define bmGPIN1 0x20
|
||||
#define bmGPIN2 0x40
|
||||
#define bmGPIN3 0x80
|
||||
|
||||
#define rIOPINS2 0xa8 //21<<3
|
||||
/* IOPINS2 Bits */
|
||||
#define bmGPOUT4 0x01
|
||||
#define bmGPOUT5 0x02
|
||||
#define bmGPOUT6 0x04
|
||||
#define bmGPOUT7 0x08
|
||||
#define bmGPIN4 0x10
|
||||
#define bmGPIN5 0x20
|
||||
#define bmGPIN6 0x40
|
||||
#define bmGPIN7 0x80
|
||||
|
||||
#define rGPINIRQ 0xb0 //22<<3
|
||||
/* GPINIRQ Bits */
|
||||
#define bmGPINIRQ0 0x01
|
||||
#define bmGPINIRQ1 0x02
|
||||
#define bmGPINIRQ2 0x04
|
||||
#define bmGPINIRQ3 0x08
|
||||
#define bmGPINIRQ4 0x10
|
||||
#define bmGPINIRQ5 0x20
|
||||
#define bmGPINIRQ6 0x40
|
||||
#define bmGPINIRQ7 0x80
|
||||
|
||||
#define rGPINIEN 0xb8 //23<<3
|
||||
/* GPINIEN Bits */
|
||||
#define bmGPINIEN0 0x01
|
||||
#define bmGPINIEN1 0x02
|
||||
#define bmGPINIEN2 0x04
|
||||
#define bmGPINIEN3 0x08
|
||||
#define bmGPINIEN4 0x10
|
||||
#define bmGPINIEN5 0x20
|
||||
#define bmGPINIEN6 0x40
|
||||
#define bmGPINIEN7 0x80
|
||||
|
||||
#define rGPINPOL 0xc0 //24<<3
|
||||
/* GPINPOL Bits */
|
||||
#define bmGPINPOL0 0x01
|
||||
#define bmGPINPOL1 0x02
|
||||
#define bmGPINPOL2 0x04
|
||||
#define bmGPINPOL3 0x08
|
||||
#define bmGPINPOL4 0x10
|
||||
#define bmGPINPOL5 0x20
|
||||
#define bmGPINPOL6 0x40
|
||||
#define bmGPINPOL7 0x80
|
||||
|
||||
#define rHIRQ 0xc8 //25<<3
|
||||
/* HIRQ Bits */
|
||||
#define bmBUSEVENTIRQ 0x01 // indicates BUS Reset Done or BUS Resume
|
||||
#define bmRWUIRQ 0x02
|
||||
#define bmRCVDAVIRQ 0x04
|
||||
#define bmSNDBAVIRQ 0x08
|
||||
#define bmSUSDNIRQ 0x10
|
||||
#define bmCONDETIRQ 0x20
|
||||
#define bmFRAMEIRQ 0x40
|
||||
#define bmHXFRDNIRQ 0x80
|
||||
|
||||
#define rHIEN 0xd0 //26<<3
|
||||
|
||||
/* HIEN Bits */
|
||||
#define bmBUSEVENTIE 0x01
|
||||
#define bmRWUIE 0x02
|
||||
#define bmRCVDAVIE 0x04
|
||||
#define bmSNDBAVIE 0x08
|
||||
#define bmSUSDNIE 0x10
|
||||
#define bmCONDETIE 0x20
|
||||
#define bmFRAMEIE 0x40
|
||||
#define bmHXFRDNIE 0x80
|
||||
|
||||
#define rMODE 0xd8 //27<<3
|
||||
|
||||
/* MODE Bits */
|
||||
#define bmHOST 0x01
|
||||
#define bmLOWSPEED 0x02
|
||||
#define bmHUBPRE 0x04
|
||||
#define bmSOFKAENAB 0x08
|
||||
#define bmSEPIRQ 0x10
|
||||
#define bmDELAYISO 0x20
|
||||
#define bmDMPULLDN 0x40
|
||||
#define bmDPPULLDN 0x80
|
||||
|
||||
#define rPERADDR 0xe0 //28<<3
|
||||
|
||||
#define rHCTL 0xe8 //29<<3
|
||||
/* HCTL Bits */
|
||||
#define bmBUSRST 0x01
|
||||
#define bmFRMRST 0x02
|
||||
#define bmSAMPLEBUS 0x04
|
||||
#define bmSIGRSM 0x08
|
||||
#define bmRCVTOG0 0x10
|
||||
#define bmRCVTOG1 0x20
|
||||
#define bmSNDTOG0 0x40
|
||||
#define bmSNDTOG1 0x80
|
||||
|
||||
#define rHXFR 0xf0 //30<<3
|
||||
/* Host transfer token values for writing the HXFR register (R30) */
|
||||
/* OR this bit field with the endpoint number in bits 3:0 */
|
||||
#define tokSETUP 0x10 // HS=0, ISO=0, OUTNIN=0, SETUP=1
|
||||
#define tokIN 0x00 // HS=0, ISO=0, OUTNIN=0, SETUP=0
|
||||
#define tokOUT 0x20 // HS=0, ISO=0, OUTNIN=1, SETUP=0
|
||||
#define tokINHS 0x80 // HS=1, ISO=0, OUTNIN=0, SETUP=0
|
||||
#define tokOUTHS 0xA0 // HS=1, ISO=0, OUTNIN=1, SETUP=0
|
||||
#define tokISOIN 0x40 // HS=0, ISO=1, OUTNIN=0, SETUP=0
|
||||
#define tokISOOUT 0x60 // HS=0, ISO=1, OUTNIN=1, SETUP=0
|
||||
|
||||
#define rHRSL 0xf8 //31<<3
|
||||
|
||||
/* HRSL Bits */
|
||||
#define bmRCVTOGRD 0x10
|
||||
#define bmSNDTOGRD 0x20
|
||||
#define bmKSTATUS 0x40
|
||||
#define bmJSTATUS 0x80
|
||||
#define bmSE0 0x00 //SE0 - disconnect state
|
||||
#define bmSE1 0xc0 //SE1 - illegal state
|
||||
|
||||
/* Host error result codes, the 4 LSB's in the HRSL register */
|
||||
#define hrSUCCESS 0x00
|
||||
#define hrBUSY 0x01
|
||||
#define hrBADREQ 0x02
|
||||
#define hrUNDEF 0x03
|
||||
#define hrNAK 0x04
|
||||
#define hrSTALL 0x05
|
||||
#define hrTOGERR 0x06
|
||||
#define hrWRONGPID 0x07
|
||||
#define hrBADBC 0x08
|
||||
#define hrPIDERR 0x09
|
||||
#define hrPKTERR 0x0A
|
||||
#define hrCRCERR 0x0B
|
||||
#define hrKERR 0x0C
|
||||
#define hrJERR 0x0D
|
||||
#define hrTIMEOUT 0x0E
|
||||
#define hrBABBLE 0x0F
|
||||
|
||||
#define MODE_FS_HOST (bmDPPULLDN|bmDMPULLDN|bmHOST|bmSOFKAENAB)
|
||||
#define MODE_LS_HOST (bmDPPULLDN|bmDMPULLDN|bmHOST|bmLOWSPEED|bmSOFKAENAB)
|
||||
|
||||
|
||||
#endif //_max3421e_h_
|
||||
@ -0,0 +1,116 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#include "Usb.h"
|
||||
// 0x80 is the default (i.e. trace) to turn off set this global to something lower.
|
||||
// this allows for 126 other debugging levels.
|
||||
// TO-DO: Allow assignment to a different serial port by software
|
||||
int UsbDEBUGlvl = 0x80;
|
||||
|
||||
void E_Notifyc(char c, int lvl) {
|
||||
if(UsbDEBUGlvl < lvl) return;
|
||||
#if defined(ARDUINO) && ARDUINO >=100
|
||||
USB_HOST_SERIAL.print(c);
|
||||
#else
|
||||
USB_HOST_SERIAL.print(c, BYTE);
|
||||
#endif
|
||||
//USB_HOST_SERIAL.flush();
|
||||
}
|
||||
|
||||
void E_Notify(char const * msg, int lvl) {
|
||||
if(UsbDEBUGlvl < lvl) return;
|
||||
if(!msg) return;
|
||||
char c;
|
||||
|
||||
while((c = pgm_read_byte(msg++))) E_Notifyc(c, lvl);
|
||||
}
|
||||
|
||||
void E_NotifyStr(char const * msg, int lvl) {
|
||||
if(UsbDEBUGlvl < lvl) return;
|
||||
if(!msg) return;
|
||||
char c;
|
||||
|
||||
while((c = *msg++)) E_Notifyc(c, lvl);
|
||||
}
|
||||
|
||||
void E_Notify(uint8_t b, int lvl) {
|
||||
if(UsbDEBUGlvl < lvl) return;
|
||||
#if defined(ARDUINO) && ARDUINO >=100
|
||||
USB_HOST_SERIAL.print(b);
|
||||
#else
|
||||
USB_HOST_SERIAL.print(b, DEC);
|
||||
#endif
|
||||
//USB_HOST_SERIAL.flush();
|
||||
}
|
||||
|
||||
void E_Notify(double d, int lvl) {
|
||||
if(UsbDEBUGlvl < lvl) return;
|
||||
USB_HOST_SERIAL.print(d);
|
||||
//USB_HOST_SERIAL.flush();
|
||||
}
|
||||
|
||||
#ifdef DEBUG_USB_HOST
|
||||
|
||||
void NotifyFailGetDevDescr(void) {
|
||||
Notify(PSTR("\r\ngetDevDescr "), 0x80);
|
||||
}
|
||||
|
||||
void NotifyFailSetDevTblEntry(void) {
|
||||
Notify(PSTR("\r\nsetDevTblEn "), 0x80);
|
||||
}
|
||||
|
||||
void NotifyFailGetConfDescr(void) {
|
||||
Notify(PSTR("\r\ngetConf "), 0x80);
|
||||
}
|
||||
|
||||
void NotifyFailSetConfDescr(void) {
|
||||
Notify(PSTR("\r\nsetConf "), 0x80);
|
||||
}
|
||||
|
||||
void NotifyFailGetDevDescr(uint8_t reason) {
|
||||
NotifyFailGetDevDescr();
|
||||
NotifyFail(reason);
|
||||
}
|
||||
|
||||
void NotifyFailSetDevTblEntry(uint8_t reason) {
|
||||
NotifyFailSetDevTblEntry();
|
||||
NotifyFail(reason);
|
||||
|
||||
}
|
||||
|
||||
void NotifyFailGetConfDescr(uint8_t reason) {
|
||||
NotifyFailGetConfDescr();
|
||||
NotifyFail(reason);
|
||||
}
|
||||
|
||||
void NotifyFailSetConfDescr(uint8_t reason) {
|
||||
NotifyFailSetConfDescr();
|
||||
NotifyFail(reason);
|
||||
}
|
||||
|
||||
void NotifyFailUnknownDevice(uint16_t VID, uint16_t PID) {
|
||||
Notify(PSTR("\r\nUnknown Device Connected - VID: "), 0x80);
|
||||
D_PrintHex<uint16_t > (VID, 0x80);
|
||||
Notify(PSTR(" PID: "), 0x80);
|
||||
D_PrintHex<uint16_t > (PID, 0x80);
|
||||
}
|
||||
|
||||
void NotifyFail(uint8_t rcode) {
|
||||
D_PrintHex<uint8_t > (rcode, 0x80);
|
||||
Notify(PSTR("\r\n"), 0x80);
|
||||
}
|
||||
#endif
|
||||
@ -0,0 +1,78 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
#if !defined(_usb_h_) || defined(__MESSAGE_H__)
|
||||
#error "Never include message.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define __MESSAGE_H__
|
||||
|
||||
extern int UsbDEBUGlvl;
|
||||
|
||||
void E_Notify(char const * msg, int lvl);
|
||||
void E_Notify(uint8_t b, int lvl);
|
||||
void E_NotifyStr(char const * msg, int lvl);
|
||||
void E_Notifyc(char c, int lvl);
|
||||
|
||||
#ifdef DEBUG_USB_HOST
|
||||
#define Notify E_Notify
|
||||
#define NotifyStr E_NotifyStr
|
||||
#define Notifyc E_Notifyc
|
||||
void NotifyFailGetDevDescr(uint8_t reason);
|
||||
void NotifyFailSetDevTblEntry(uint8_t reason);
|
||||
void NotifyFailGetConfDescr(uint8_t reason);
|
||||
void NotifyFailSetConfDescr(uint8_t reason);
|
||||
void NotifyFailGetDevDescr(void);
|
||||
void NotifyFailSetDevTblEntry(void);
|
||||
void NotifyFailGetConfDescr(void);
|
||||
void NotifyFailSetConfDescr(void);
|
||||
void NotifyFailUnknownDevice(uint16_t VID, uint16_t PID);
|
||||
void NotifyFail(uint8_t rcode);
|
||||
#else
|
||||
#define Notify(...) ((void)0)
|
||||
#define NotifyStr(...) ((void)0)
|
||||
#define Notifyc(...) ((void)0)
|
||||
#define NotifyFailGetDevDescr(...) ((void)0)
|
||||
#define NotifyFailSetDevTblEntry(...) ((void)0)
|
||||
#define NotifyFailGetConfDescr(...) ((void)0)
|
||||
#define NotifyFailGetDevDescr(...) ((void)0)
|
||||
#define NotifyFailSetDevTblEntry(...) ((void)0)
|
||||
#define NotifyFailGetConfDescr(...) ((void)0)
|
||||
#define NotifyFailSetConfDescr(...) ((void)0)
|
||||
#define NotifyFailUnknownDevice(...) ((void)0)
|
||||
#define NotifyFail(...) ((void)0)
|
||||
#endif
|
||||
|
||||
template <class ERROR_TYPE>
|
||||
void ErrorMessage(uint8_t level, char const * msg, ERROR_TYPE rcode = 0) {
|
||||
#ifdef DEBUG_USB_HOST
|
||||
Notify(msg, level);
|
||||
Notify(PSTR(": "), level);
|
||||
D_PrintHex<ERROR_TYPE > (rcode, level);
|
||||
Notify(PSTR("\r\n"), level);
|
||||
#endif
|
||||
}
|
||||
|
||||
template <class ERROR_TYPE>
|
||||
void ErrorMessage(char const * msg, ERROR_TYPE rcode = 0) {
|
||||
#ifdef DEBUG_USB_HOST
|
||||
Notify(msg, 0x80);
|
||||
Notify(PSTR(": "), 0x80);
|
||||
D_PrintHex<ERROR_TYPE > (rcode, 0x80);
|
||||
Notify(PSTR("\r\n"), 0x80);
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif // __MESSAGE_H__
|
||||
@ -0,0 +1,67 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
#include "Usb.h"
|
||||
|
||||
bool MultiByteValueParser::Parse(uint8_t **pp, uint16_t *pcntdn) {
|
||||
if(!pBuf) {
|
||||
Notify(PSTR("Buffer pointer is NULL!\r\n"), 0x80);
|
||||
return false;
|
||||
}
|
||||
for(; countDown && (*pcntdn); countDown--, (*pcntdn)--, (*pp)++)
|
||||
pBuf[valueSize - countDown] = (**pp);
|
||||
|
||||
if(countDown)
|
||||
return false;
|
||||
|
||||
countDown = valueSize;
|
||||
return true;
|
||||
}
|
||||
|
||||
bool PTPListParser::Parse(uint8_t **pp, uint16_t *pcntdn, PTP_ARRAY_EL_FUNC pf, const void *me) {
|
||||
switch(nStage) {
|
||||
case 0:
|
||||
pBuf->valueSize = lenSize;
|
||||
theParser.Initialize(pBuf);
|
||||
nStage = 1;
|
||||
|
||||
case 1:
|
||||
if(!theParser.Parse(pp, pcntdn))
|
||||
return false;
|
||||
|
||||
arLen = 0;
|
||||
arLen = (pBuf->valueSize >= 4) ? *((uint32_t*)pBuf->pValue) : (uint32_t)(*((uint16_t*)pBuf->pValue));
|
||||
arLenCntdn = arLen;
|
||||
nStage = 2;
|
||||
|
||||
case 2:
|
||||
pBuf->valueSize = valSize;
|
||||
theParser.Initialize(pBuf);
|
||||
nStage = 3;
|
||||
|
||||
case 3:
|
||||
for(; arLenCntdn; arLenCntdn--) {
|
||||
if(!theParser.Parse(pp, pcntdn))
|
||||
return false;
|
||||
|
||||
if(pf)
|
||||
pf(pBuf, (arLen - arLenCntdn), me);
|
||||
}
|
||||
|
||||
nStage = 0;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
@ -0,0 +1,140 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#if !defined(_usb_h_) || defined(__PARSETOOLS_H__)
|
||||
#error "Never include parsetools.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define __PARSETOOLS_H__
|
||||
|
||||
struct MultiValueBuffer {
|
||||
uint8_t valueSize;
|
||||
void *pValue;
|
||||
} __attribute__((packed));
|
||||
|
||||
class MultiByteValueParser {
|
||||
uint8_t * pBuf;
|
||||
uint8_t countDown;
|
||||
uint8_t valueSize;
|
||||
|
||||
public:
|
||||
|
||||
MultiByteValueParser() : pBuf(NULL), countDown(0), valueSize(0) {
|
||||
};
|
||||
|
||||
const uint8_t* GetBuffer() {
|
||||
return pBuf;
|
||||
};
|
||||
|
||||
void Initialize(MultiValueBuffer * const pbuf) {
|
||||
pBuf = (uint8_t*)pbuf->pValue;
|
||||
countDown = valueSize = pbuf->valueSize;
|
||||
};
|
||||
|
||||
bool Parse(uint8_t **pp, uint16_t *pcntdn);
|
||||
};
|
||||
|
||||
class ByteSkipper {
|
||||
uint8_t *pBuf;
|
||||
uint8_t nStage;
|
||||
uint16_t countDown;
|
||||
|
||||
public:
|
||||
|
||||
ByteSkipper() : pBuf(NULL), nStage(0), countDown(0) {
|
||||
};
|
||||
|
||||
void Initialize(MultiValueBuffer *pbuf) {
|
||||
pBuf = (uint8_t*)pbuf->pValue;
|
||||
countDown = 0;
|
||||
};
|
||||
|
||||
bool Skip(uint8_t **pp, uint16_t *pcntdn, uint16_t bytes_to_skip) {
|
||||
switch(nStage) {
|
||||
case 0:
|
||||
countDown = bytes_to_skip;
|
||||
nStage++;
|
||||
case 1:
|
||||
for(; countDown && (*pcntdn); countDown--, (*pp)++, (*pcntdn)--);
|
||||
|
||||
if(!countDown)
|
||||
nStage = 0;
|
||||
};
|
||||
return (!countDown);
|
||||
};
|
||||
};
|
||||
|
||||
// Pointer to a callback function triggered for each element of PTP array when used with PTPArrayParser
|
||||
typedef void (*PTP_ARRAY_EL_FUNC)(const MultiValueBuffer * const p, uint32_t count, const void *me);
|
||||
|
||||
class PTPListParser {
|
||||
public:
|
||||
|
||||
enum ParseMode {
|
||||
modeArray, modeRange/*, modeEnum*/
|
||||
};
|
||||
|
||||
private:
|
||||
uint8_t nStage;
|
||||
uint8_t enStage;
|
||||
|
||||
uint32_t arLen;
|
||||
uint32_t arLenCntdn;
|
||||
|
||||
uint8_t lenSize; // size of the array length field in bytes
|
||||
uint8_t valSize; // size of the array element in bytes
|
||||
|
||||
MultiValueBuffer *pBuf;
|
||||
|
||||
// The only parser for both size and array element parsing
|
||||
MultiByteValueParser theParser;
|
||||
|
||||
uint8_t /*ParseMode*/ prsMode;
|
||||
|
||||
public:
|
||||
|
||||
PTPListParser() :
|
||||
nStage(0),
|
||||
enStage(0),
|
||||
arLen(0),
|
||||
arLenCntdn(0),
|
||||
lenSize(0),
|
||||
valSize(0),
|
||||
pBuf(NULL),
|
||||
prsMode(modeArray) {
|
||||
};
|
||||
|
||||
void Initialize(const uint8_t len_size, const uint8_t val_size, MultiValueBuffer * const p, const uint8_t mode = modeArray) {
|
||||
pBuf = p;
|
||||
lenSize = len_size;
|
||||
valSize = val_size;
|
||||
prsMode = mode;
|
||||
|
||||
if(prsMode == modeRange) {
|
||||
arLenCntdn = arLen = 3;
|
||||
nStage = 2;
|
||||
} else {
|
||||
arLenCntdn = arLen = 0;
|
||||
nStage = 0;
|
||||
}
|
||||
enStage = 0;
|
||||
theParser.Initialize(p);
|
||||
};
|
||||
|
||||
bool Parse(uint8_t **pp, uint16_t *pcntdn, PTP_ARRAY_EL_FUNC pf, const void *me = NULL);
|
||||
};
|
||||
|
||||
#endif // __PARSETOOLS_H__
|
||||
@ -0,0 +1,84 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#if !defined(_usb_h_) || defined(__PRINTHEX_H__)
|
||||
#error "Never include printhex.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define __PRINTHEX_H__
|
||||
|
||||
void E_Notifyc(char c, int lvl);
|
||||
|
||||
template <class T>
|
||||
void PrintHex(T val, int lvl) {
|
||||
int num_nibbles = sizeof (T) * 2;
|
||||
|
||||
do {
|
||||
char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0f);
|
||||
if(v > 57) v += 7;
|
||||
E_Notifyc(v, lvl);
|
||||
} while(--num_nibbles);
|
||||
}
|
||||
|
||||
template <class T>
|
||||
void PrintBin(T val, int lvl) {
|
||||
for(T mask = (((T)1) << ((sizeof (T) << 3) - 1)); mask; mask >>= 1)
|
||||
if(val & mask)
|
||||
E_Notifyc('1', lvl);
|
||||
else
|
||||
E_Notifyc('0', lvl);
|
||||
}
|
||||
|
||||
template <class T>
|
||||
void SerialPrintHex(T val) {
|
||||
int num_nibbles = sizeof (T) * 2;
|
||||
|
||||
do {
|
||||
char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0f);
|
||||
if(v > 57) v += 7;
|
||||
USB_HOST_SERIAL.print(v);
|
||||
} while(--num_nibbles);
|
||||
}
|
||||
|
||||
/*template <class T>
|
||||
void PrintHex2(Print *prn, T val) {
|
||||
T mask = (((T)1) << (((sizeof (T) << 1) - 1) << 2));
|
||||
|
||||
while(mask > 1) {
|
||||
if(val < mask)
|
||||
prn->print("0");
|
||||
|
||||
mask >>= 4;
|
||||
}
|
||||
prn->print((T)val, HEX);
|
||||
}*/
|
||||
|
||||
template <class T> void D_PrintHex(T val, int lvl) {
|
||||
#ifdef DEBUG_USB_HOST
|
||||
PrintHex<T > (val, lvl);
|
||||
#endif
|
||||
}
|
||||
|
||||
template <class T>
|
||||
void D_PrintBin(T val, int lvl) {
|
||||
#ifdef DEBUG_USB_HOST
|
||||
PrintBin<T > (val, lvl);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
|
||||
#endif // __PRINTHEX_H__
|
||||
@ -0,0 +1,143 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#ifndef USB_HOST_SHIELD_SETTINGS_H
|
||||
#define USB_HOST_SHIELD_SETTINGS_H
|
||||
#include "macros.h"
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
/* Added by Bill Greiman to speed up mass storage initialization with USB
|
||||
* flash drives and simple USB hard drives.
|
||||
* Disable this by defining DELAY(x) to be delay(x).
|
||||
*/
|
||||
#define DELAY(x) if((x) < 200)delay(x)
|
||||
/* Almost all USB flash drives and simple USB hard drives fail the write
|
||||
* protect test and add 20 - 30 seconds to USB init. Set SKIP_WRITE_PROTECT
|
||||
* to nonzero to skip the test and assume the drive is writable.
|
||||
*/
|
||||
#define SKIP_WRITE_PROTECT 1
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// DEBUGGING
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
/* Set this to 1 to activate serial debugging */
|
||||
#define ENABLE_UHS_DEBUGGING 0
|
||||
|
||||
/* This can be used to select which serial port to use for debugging if
|
||||
* multiple serial ports are available.
|
||||
* For example Serial3.
|
||||
*/
|
||||
#ifndef USB_HOST_SERIAL
|
||||
#define USB_HOST_SERIAL Serial
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// Manual board activation
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
/* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */
|
||||
#define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually
|
||||
|
||||
/* Set this to 1 if you are using a Black Widdow */
|
||||
#define USE_UHS_BLACK_WIDDOW 0
|
||||
|
||||
/* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */
|
||||
#define USE_XMEM_SPI_LOCK 0
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// MASS STORAGE
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// <<<<<<<<<<<<<<<< IMPORTANT >>>>>>>>>>>>>>>
|
||||
// Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives.
|
||||
// Each LUN needs ~13 bytes to be able to track the state of each unit.
|
||||
#ifndef MASS_MAX_SUPPORTED_LUN
|
||||
#define MASS_MAX_SUPPORTED_LUN 1 ///// 8 WHG
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// Set to 1 to use the faster spi4teensy3 driver.
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
#ifndef USE_SPI4TEENSY3
|
||||
#define USE_SPI4TEENSY3 1
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// AUTOMATIC Settings
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
// No user serviceable parts below this line.
|
||||
// DO NOT change anything below here unless you are a developer!
|
||||
|
||||
#if defined(ARDUINO) && ARDUINO >=100
|
||||
#include <Arduino.h>
|
||||
#else
|
||||
#include <WProgram.h>
|
||||
#include <pins_arduino.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/io.h>
|
||||
#define F(str) (str)
|
||||
#endif
|
||||
|
||||
#if defined(__GNUC__) && defined(__AVR__)
|
||||
#ifndef GCC_VERSION
|
||||
#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
|
||||
#endif
|
||||
#if GCC_VERSION < 40602 // Test for GCC < 4.6.2
|
||||
#ifdef PROGMEM
|
||||
#undef PROGMEM
|
||||
#define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4
|
||||
#ifdef PSTR
|
||||
#undef PSTR
|
||||
#define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING
|
||||
#define DEBUG_USB_HOST
|
||||
#endif
|
||||
|
||||
// To use some other locking (e.g. freertos),
|
||||
// define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock.
|
||||
// NOTE: NO argument is passed. You have to do this within your routine for
|
||||
// whatever you are using to lock and unlock.
|
||||
#if !defined(XMEM_ACQUIRE_SPI)
|
||||
#if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API)
|
||||
#include <xmem.h>
|
||||
#else
|
||||
#define XMEM_ACQUIRE_SPI() (void(0))
|
||||
#define XMEM_RELEASE_SPI() (void(0))
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP)
|
||||
#include <xmem.h>
|
||||
#else
|
||||
#define EXT_RAM 0
|
||||
#endif
|
||||
|
||||
#if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__))
|
||||
#define USING_SPI4TEENSY3 USE_SPI4TEENSY3
|
||||
#else
|
||||
#define USING_SPI4TEENSY3 0
|
||||
#endif
|
||||
|
||||
#if (defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822)
|
||||
#include <SPI.h> // Use the Arduino SPI library for the Arduino Due and RedBearLab nRF51822
|
||||
#endif
|
||||
|
||||
#endif /* SETTINGS_H */
|
||||
@ -0,0 +1,166 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
|
||||
#if !defined(_usb_h_) || defined(_ch9_h_)
|
||||
#error "Never include usb_ch9.h directly; include Usb.h instead"
|
||||
#else
|
||||
|
||||
/* USB chapter 9 structures */
|
||||
#define _ch9_h_
|
||||
|
||||
/* Misc.USB constants */
|
||||
#define DEV_DESCR_LEN 18 //device descriptor length
|
||||
#define CONF_DESCR_LEN 9 //configuration descriptor length
|
||||
#define INTR_DESCR_LEN 9 //interface descriptor length
|
||||
#define EP_DESCR_LEN 7 //endpoint descriptor length
|
||||
|
||||
/* Standard Device Requests */
|
||||
|
||||
#define USB_REQUEST_GET_STATUS 0 // Standard Device Request - GET STATUS
|
||||
#define USB_REQUEST_CLEAR_FEATURE 1 // Standard Device Request - CLEAR FEATURE
|
||||
#define USB_REQUEST_SET_FEATURE 3 // Standard Device Request - SET FEATURE
|
||||
#define USB_REQUEST_SET_ADDRESS 5 // Standard Device Request - SET ADDRESS
|
||||
#define USB_REQUEST_GET_DESCRIPTOR 6 // Standard Device Request - GET DESCRIPTOR
|
||||
#define USB_REQUEST_SET_DESCRIPTOR 7 // Standard Device Request - SET DESCRIPTOR
|
||||
#define USB_REQUEST_GET_CONFIGURATION 8 // Standard Device Request - GET CONFIGURATION
|
||||
#define USB_REQUEST_SET_CONFIGURATION 9 // Standard Device Request - SET CONFIGURATION
|
||||
#define USB_REQUEST_GET_INTERFACE 10 // Standard Device Request - GET INTERFACE
|
||||
#define USB_REQUEST_SET_INTERFACE 11 // Standard Device Request - SET INTERFACE
|
||||
#define USB_REQUEST_SYNCH_FRAME 12 // Standard Device Request - SYNCH FRAME
|
||||
|
||||
#define USB_FEATURE_ENDPOINT_HALT 0 // CLEAR/SET FEATURE - Endpoint Halt
|
||||
#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // CLEAR/SET FEATURE - Device remote wake-up
|
||||
#define USB_FEATURE_TEST_MODE 2 // CLEAR/SET FEATURE - Test mode
|
||||
|
||||
/* Setup Data Constants */
|
||||
|
||||
#define USB_SETUP_HOST_TO_DEVICE 0x00 // Device Request bmRequestType transfer direction - host to device transfer
|
||||
#define USB_SETUP_DEVICE_TO_HOST 0x80 // Device Request bmRequestType transfer direction - device to host transfer
|
||||
#define USB_SETUP_TYPE_STANDARD 0x00 // Device Request bmRequestType type - standard
|
||||
#define USB_SETUP_TYPE_CLASS 0x20 // Device Request bmRequestType type - class
|
||||
#define USB_SETUP_TYPE_VENDOR 0x40 // Device Request bmRequestType type - vendor
|
||||
#define USB_SETUP_RECIPIENT_DEVICE 0x00 // Device Request bmRequestType recipient - device
|
||||
#define USB_SETUP_RECIPIENT_INTERFACE 0x01 // Device Request bmRequestType recipient - interface
|
||||
#define USB_SETUP_RECIPIENT_ENDPOINT 0x02 // Device Request bmRequestType recipient - endpoint
|
||||
#define USB_SETUP_RECIPIENT_OTHER 0x03 // Device Request bmRequestType recipient - other
|
||||
|
||||
/* USB descriptors */
|
||||
|
||||
#define USB_DESCRIPTOR_DEVICE 0x01 // bDescriptorType for a Device Descriptor.
|
||||
#define USB_DESCRIPTOR_CONFIGURATION 0x02 // bDescriptorType for a Configuration Descriptor.
|
||||
#define USB_DESCRIPTOR_STRING 0x03 // bDescriptorType for a String Descriptor.
|
||||
#define USB_DESCRIPTOR_INTERFACE 0x04 // bDescriptorType for an Interface Descriptor.
|
||||
#define USB_DESCRIPTOR_ENDPOINT 0x05 // bDescriptorType for an Endpoint Descriptor.
|
||||
#define USB_DESCRIPTOR_DEVICE_QUALIFIER 0x06 // bDescriptorType for a Device Qualifier.
|
||||
#define USB_DESCRIPTOR_OTHER_SPEED 0x07 // bDescriptorType for a Other Speed Configuration.
|
||||
#define USB_DESCRIPTOR_INTERFACE_POWER 0x08 // bDescriptorType for Interface Power.
|
||||
#define USB_DESCRIPTOR_OTG 0x09 // bDescriptorType for an OTG Descriptor.
|
||||
|
||||
#define HID_DESCRIPTOR_HID 0x21
|
||||
|
||||
|
||||
|
||||
/* OTG SET FEATURE Constants */
|
||||
#define OTG_FEATURE_B_HNP_ENABLE 3 // SET FEATURE OTG - Enable B device to perform HNP
|
||||
#define OTG_FEATURE_A_HNP_SUPPORT 4 // SET FEATURE OTG - A device supports HNP
|
||||
#define OTG_FEATURE_A_ALT_HNP_SUPPORT 5 // SET FEATURE OTG - Another port on the A device supports HNP
|
||||
|
||||
/* USB Endpoint Transfer Types */
|
||||
#define USB_TRANSFER_TYPE_CONTROL 0x00 // Endpoint is a control endpoint.
|
||||
#define USB_TRANSFER_TYPE_ISOCHRONOUS 0x01 // Endpoint is an isochronous endpoint.
|
||||
#define USB_TRANSFER_TYPE_BULK 0x02 // Endpoint is a bulk endpoint.
|
||||
#define USB_TRANSFER_TYPE_INTERRUPT 0x03 // Endpoint is an interrupt endpoint.
|
||||
#define bmUSB_TRANSFER_TYPE 0x03 // bit mask to separate transfer type from ISO attributes
|
||||
|
||||
|
||||
/* Standard Feature Selectors for CLEAR_FEATURE Requests */
|
||||
#define USB_FEATURE_ENDPOINT_STALL 0 // Endpoint recipient
|
||||
#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // Device recipient
|
||||
#define USB_FEATURE_TEST_MODE 2 // Device recipient
|
||||
|
||||
/* descriptor data structures */
|
||||
|
||||
/* Device descriptor structure */
|
||||
typedef struct {
|
||||
uint8_t bLength; // Length of this descriptor.
|
||||
uint8_t bDescriptorType; // DEVICE descriptor type (USB_DESCRIPTOR_DEVICE).
|
||||
uint16_t bcdUSB; // USB Spec Release Number (BCD).
|
||||
uint8_t bDeviceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific.
|
||||
uint8_t bDeviceSubClass; // Subclass code (assigned by the USB-IF).
|
||||
uint8_t bDeviceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific.
|
||||
uint8_t bMaxPacketSize0; // Maximum packet size for endpoint 0.
|
||||
uint16_t idVendor; // Vendor ID (assigned by the USB-IF).
|
||||
uint16_t idProduct; // Product ID (assigned by the manufacturer).
|
||||
uint16_t bcdDevice; // Device release number (BCD).
|
||||
uint8_t iManufacturer; // Index of String Descriptor describing the manufacturer.
|
||||
uint8_t iProduct; // Index of String Descriptor describing the product.
|
||||
uint8_t iSerialNumber; // Index of String Descriptor with the device's serial number.
|
||||
uint8_t bNumConfigurations; // Number of possible configurations.
|
||||
} __attribute__((packed)) USB_DEVICE_DESCRIPTOR;
|
||||
|
||||
/* Configuration descriptor structure */
|
||||
typedef struct {
|
||||
uint8_t bLength; // Length of this descriptor.
|
||||
uint8_t bDescriptorType; // CONFIGURATION descriptor type (USB_DESCRIPTOR_CONFIGURATION).
|
||||
uint16_t wTotalLength; // Total length of all descriptors for this configuration.
|
||||
uint8_t bNumInterfaces; // Number of interfaces in this configuration.
|
||||
uint8_t bConfigurationValue; // Value of this configuration (1 based).
|
||||
uint8_t iConfiguration; // Index of String Descriptor describing the configuration.
|
||||
uint8_t bmAttributes; // Configuration characteristics.
|
||||
uint8_t bMaxPower; // Maximum power consumed by this configuration.
|
||||
} __attribute__((packed)) USB_CONFIGURATION_DESCRIPTOR;
|
||||
|
||||
/* Interface descriptor structure */
|
||||
typedef struct {
|
||||
uint8_t bLength; // Length of this descriptor.
|
||||
uint8_t bDescriptorType; // INTERFACE descriptor type (USB_DESCRIPTOR_INTERFACE).
|
||||
uint8_t bInterfaceNumber; // Number of this interface (0 based).
|
||||
uint8_t bAlternateSetting; // Value of this alternate interface setting.
|
||||
uint8_t bNumEndpoints; // Number of endpoints in this interface.
|
||||
uint8_t bInterfaceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific.
|
||||
uint8_t bInterfaceSubClass; // Subclass code (assigned by the USB-IF).
|
||||
uint8_t bInterfaceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific.
|
||||
uint8_t iInterface; // Index of String Descriptor describing the interface.
|
||||
} __attribute__((packed)) USB_INTERFACE_DESCRIPTOR;
|
||||
|
||||
/* Endpoint descriptor structure */
|
||||
typedef struct {
|
||||
uint8_t bLength; // Length of this descriptor.
|
||||
uint8_t bDescriptorType; // ENDPOINT descriptor type (USB_DESCRIPTOR_ENDPOINT).
|
||||
uint8_t bEndpointAddress; // Endpoint address. Bit 7 indicates direction (0=OUT, 1=IN).
|
||||
uint8_t bmAttributes; // Endpoint transfer type.
|
||||
uint16_t wMaxPacketSize; // Maximum packet size.
|
||||
uint8_t bInterval; // Polling interval in frames.
|
||||
} __attribute__((packed)) USB_ENDPOINT_DESCRIPTOR;
|
||||
|
||||
/* HID descriptor */
|
||||
typedef struct {
|
||||
uint8_t bLength;
|
||||
uint8_t bDescriptorType;
|
||||
uint16_t bcdHID; // HID class specification release
|
||||
uint8_t bCountryCode;
|
||||
uint8_t bNumDescriptors; // Number of additional class specific descriptors
|
||||
uint8_t bDescrType; // Type of class descriptor
|
||||
uint16_t wDescriptorLength; // Total size of the Report descriptor
|
||||
} __attribute__((packed)) USB_HID_DESCRIPTOR;
|
||||
|
||||
typedef struct {
|
||||
uint8_t bDescrType; // Type of class descriptor
|
||||
uint16_t wDescriptorLength; // Total size of the Report descriptor
|
||||
} __attribute__((packed)) HID_CLASS_DESCRIPTOR_LEN_AND_TYPE;
|
||||
|
||||
#endif // _ch9_h_
|
||||
@ -0,0 +1,462 @@
|
||||
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
||||
|
||||
This software may be distributed and modified under the terms of the GNU
|
||||
General Public License version 2 (GPL2) as published by the Free Software
|
||||
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
||||
this file. Please note that GPL2 Section 2[b] requires that all works based
|
||||
on this software must also be made publicly available under the terms of
|
||||
the GPL2 ("Copyleft").
|
||||
|
||||
Contact information
|
||||
-------------------
|
||||
|
||||
Circuits At Home, LTD
|
||||
Web : http://www.circuitsathome.com
|
||||
e-mail : support@circuitsathome.com
|
||||
*/
|
||||
/* MAX3421E-based USB Host Library header file */
|
||||
|
||||
|
||||
#if !defined(_usb_h_) || defined(_USBHOST_H_)
|
||||
#error "Never include usbhost.h directly; include Usb.h instead"
|
||||
#else
|
||||
#define _USBHOST_H_
|
||||
|
||||
#if USING_SPI4TEENSY3
|
||||
#include <spi4teensy3.h>
|
||||
#include <sys/types.h>
|
||||
#endif
|
||||
|
||||
|
||||
/* SPI initialization */
|
||||
template< typename SPI_CLK, typename SPI_MOSI, typename SPI_MISO, typename SPI_SS > class SPi {
|
||||
public:
|
||||
#if USING_SPI4TEENSY3
|
||||
static void init() {
|
||||
// spi4teensy3 inits everything for us, except /SS
|
||||
// CLK, MOSI and MISO are hard coded for now.
|
||||
// spi4teensy3::init(0,0,0); // full speed, cpol 0, cpha 0
|
||||
spi4teensy3::init(); // full speed, cpol 0, cpha 0
|
||||
SPI_SS::SetDirWrite();
|
||||
SPI_SS::Set();
|
||||
}
|
||||
#elif defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)
|
||||
static void init() {
|
||||
SPI_SS::SetDirWrite();
|
||||
SPI_SS::Set();
|
||||
SPI.begin();
|
||||
SPI.setClockDivider(4); // Set speed to 84MHz/4=21MHz - the MAX3421E can handle up to 26MHz
|
||||
}
|
||||
#elif defined(RBL_NRF51822)
|
||||
static void init() {
|
||||
SPI_SS::SetDirWrite();
|
||||
SPI_SS::Set();
|
||||
SPI.begin();
|
||||
// SPI.setFrequency(SPI_FREQUENCY_8M);
|
||||
}
|
||||
#else
|
||||
static void init() {
|
||||
//uint8_t tmp;
|
||||
SPI_CLK::SetDirWrite();
|
||||
SPI_MOSI::SetDirWrite();
|
||||
SPI_MISO::SetDirRead();
|
||||
SPI_SS::SetDirWrite();
|
||||
/* mode 00 (CPOL=0, CPHA=0) master, fclk/2. Mode 11 (CPOL=11, CPHA=11) is also supported by MAX3421E */
|
||||
SPCR = 0x50;
|
||||
SPSR = 0x01; // 0x01
|
||||
/**/
|
||||
//tmp = SPSR;
|
||||
//tmp = SPDR;
|
||||
}
|
||||
#endif
|
||||
};
|
||||
|
||||
/* SPI pin definitions. see avrpins.h */
|
||||
#if defined(__AVR_ATmega1280__) || (__AVR_ATmega2560__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
|
||||
typedef SPi< Pb1, Pb2, Pb3, Pb0 > spi;
|
||||
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
|
||||
typedef SPi< Pb5, Pb3, Pb4, Pb2 > spi;
|
||||
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
|
||||
typedef SPi< Pb7, Pb5, Pb6, Pb4 > spi;
|
||||
#elif defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__))
|
||||
typedef SPi< P13, P11, P12, P10 > spi;
|
||||
#elif defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)
|
||||
typedef SPi< P76, P75, P74, P10 > spi;
|
||||
#elif defined(RBL_NRF51822)
|
||||
typedef SPi< P16, P18, P17, P10 > spi;
|
||||
#else
|
||||
#error "No SPI entry in usbhost.h"
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
vbus_on = 0,
|
||||
vbus_off = GPX_VBDET
|
||||
} VBUS_t;
|
||||
|
||||
template< typename SPI_SS, typename INTR > class MAX3421e /* : public spi */ {
|
||||
static uint8_t vbusState;
|
||||
|
||||
public:
|
||||
MAX3421e();
|
||||
void regWr(uint8_t reg, uint8_t data);
|
||||
uint8_t* bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p);
|
||||
void gpioWr(uint8_t data);
|
||||
uint8_t regRd(uint8_t reg);
|
||||
uint8_t* bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p);
|
||||
uint8_t gpioRd();
|
||||
uint16_t reset();
|
||||
int8_t Init();
|
||||
int8_t Init(int mseconds);
|
||||
|
||||
void vbusPower(VBUS_t state) {
|
||||
regWr(rPINCTL, (bmFDUPSPI | bmINTLEVEL | state));
|
||||
}
|
||||
|
||||
uint8_t getVbusState(void) {
|
||||
return vbusState;
|
||||
};
|
||||
void busprobe();
|
||||
uint8_t GpxHandler();
|
||||
uint8_t IntHandler();
|
||||
uint8_t Task();
|
||||
};
|
||||
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint8_t MAX3421e< SPI_SS, INTR >::vbusState = 0;
|
||||
|
||||
/* constructor */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
MAX3421e< SPI_SS, INTR >::MAX3421e() {
|
||||
// Leaving ADK hardware setup in here, for now. This really belongs with the other parts.
|
||||
#ifdef BOARD_MEGA_ADK
|
||||
// For Mega ADK, which has a Max3421e on-board, set MAX_RESET to output mode, and then set it to HIGH
|
||||
P55::SetDirWrite();
|
||||
P55::Set();
|
||||
#endif
|
||||
};
|
||||
|
||||
/* write single byte into MAX3421 register */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
void MAX3421e< SPI_SS, INTR >::regWr(uint8_t reg, uint8_t data) {
|
||||
XMEM_ACQUIRE_SPI();
|
||||
SPI_SS::Clear();
|
||||
#if USING_SPI4TEENSY3
|
||||
uint8_t c[2];
|
||||
c[0] = reg | 0x02;
|
||||
c[1] = data;
|
||||
spi4teensy3::send(c, 2);
|
||||
#elif (defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822)
|
||||
SPI.transfer(reg | 0x02);
|
||||
SPI.transfer(data);
|
||||
#else
|
||||
SPDR = (reg | 0x02);
|
||||
while(!(SPSR & (1 << SPIF)));
|
||||
SPDR = data;
|
||||
while(!(SPSR & (1 << SPIF)));
|
||||
#endif
|
||||
SPI_SS::Set();
|
||||
XMEM_RELEASE_SPI();
|
||||
return;
|
||||
};
|
||||
/* multiple-byte write */
|
||||
|
||||
/* returns a pointer to memory position after last written */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint8_t* MAX3421e< SPI_SS, INTR >::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p) {
|
||||
XMEM_ACQUIRE_SPI();
|
||||
SPI_SS::Clear();
|
||||
#if USING_SPI4TEENSY3
|
||||
spi4teensy3::send(reg | 0x02);
|
||||
spi4teensy3::send(data_p, nbytes);
|
||||
data_p += nbytes;
|
||||
#elif (defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822)
|
||||
SPI.transfer(reg | 0x02);
|
||||
while(nbytes) {
|
||||
SPI.transfer(*data_p);
|
||||
nbytes--;
|
||||
data_p++; // advance data pointer
|
||||
}
|
||||
#else
|
||||
SPDR = (reg | 0x02); //set WR bit and send register number
|
||||
while(nbytes) {
|
||||
while(!(SPSR & (1 << SPIF))); //check if previous byte was sent
|
||||
SPDR = (*data_p); // send next data byte
|
||||
nbytes--;
|
||||
data_p++; // advance data pointer
|
||||
}
|
||||
while(!(SPSR & (1 << SPIF)));
|
||||
#endif
|
||||
SPI_SS::Set();
|
||||
XMEM_RELEASE_SPI();
|
||||
return ( data_p);
|
||||
}
|
||||
/* GPIO write */
|
||||
/*GPIO byte is split between 2 registers, so two writes are needed to write one byte */
|
||||
|
||||
/* GPOUT bits are in the low nibble. 0-3 in IOPINS1, 4-7 in IOPINS2 */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
void MAX3421e< SPI_SS, INTR >::gpioWr(uint8_t data) {
|
||||
regWr(rIOPINS1, data);
|
||||
data >>= 4;
|
||||
regWr(rIOPINS2, data);
|
||||
return;
|
||||
}
|
||||
|
||||
/* single host register read */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint8_t MAX3421e< SPI_SS, INTR >::regRd(uint8_t reg) {
|
||||
XMEM_ACQUIRE_SPI();
|
||||
SPI_SS::Clear();
|
||||
#if USING_SPI4TEENSY3
|
||||
spi4teensy3::send(reg);
|
||||
uint8_t rv = spi4teensy3::receive();
|
||||
SPI_SS::Set();
|
||||
#elif (defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822)
|
||||
SPI.transfer(reg);
|
||||
uint8_t rv = SPI.transfer(0);
|
||||
SPI_SS::Set();
|
||||
#else
|
||||
SPDR = reg;
|
||||
while(!(SPSR & (1 << SPIF)));
|
||||
SPDR = 0; //send empty byte
|
||||
while(!(SPSR & (1 << SPIF)));
|
||||
SPI_SS::Set();
|
||||
uint8_t rv = SPDR;
|
||||
#endif
|
||||
XMEM_RELEASE_SPI();
|
||||
return (rv);
|
||||
}
|
||||
/* multiple-byte register read */
|
||||
|
||||
/* returns a pointer to a memory position after last read */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint8_t* MAX3421e< SPI_SS, INTR >::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p) {
|
||||
XMEM_ACQUIRE_SPI();
|
||||
SPI_SS::Clear();
|
||||
#if USING_SPI4TEENSY3
|
||||
spi4teensy3::send(reg);
|
||||
spi4teensy3::receive(data_p, nbytes);
|
||||
data_p += nbytes;
|
||||
#elif (defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822)
|
||||
SPI.transfer(reg);
|
||||
while(nbytes) {
|
||||
*data_p++ = SPI.transfer(0);
|
||||
nbytes--;
|
||||
}
|
||||
#else
|
||||
SPDR = reg;
|
||||
while(!(SPSR & (1 << SPIF))); //wait
|
||||
while(nbytes) {
|
||||
SPDR = 0; //send empty byte
|
||||
nbytes--;
|
||||
while(!(SPSR & (1 << SPIF)));
|
||||
#if 0
|
||||
{
|
||||
*data_p = SPDR;
|
||||
printf("%2.2x ", *data_p);
|
||||
}
|
||||
data_p++;
|
||||
}
|
||||
printf("\r\n");
|
||||
#else
|
||||
*data_p++ = SPDR;
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
SPI_SS::Set();
|
||||
XMEM_RELEASE_SPI();
|
||||
return ( data_p);
|
||||
}
|
||||
/* GPIO read. See gpioWr for explanation */
|
||||
|
||||
/* GPIN pins are in high nibbles of IOPINS1, IOPINS2 */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint8_t MAX3421e< SPI_SS, INTR >::gpioRd() {
|
||||
uint8_t gpin = 0;
|
||||
gpin = regRd(rIOPINS2); //pins 4-7
|
||||
gpin &= 0xf0; //clean lower nibble
|
||||
gpin |= (regRd(rIOPINS1) >> 4); //shift low bits and OR with upper from previous operation.
|
||||
return ( gpin);
|
||||
}
|
||||
|
||||
/* reset MAX3421E. Returns number of cycles it took for PLL to stabilize after reset
|
||||
or zero if PLL haven't stabilized in 65535 cycles */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint16_t MAX3421e< SPI_SS, INTR >::reset() {
|
||||
uint16_t i = 0;
|
||||
regWr(rUSBCTL, bmCHIPRES);
|
||||
regWr(rUSBCTL, 0x00);
|
||||
while(++i) {
|
||||
if((regRd(rUSBIRQ) & bmOSCOKIRQ)) {
|
||||
break;
|
||||
}
|
||||
}
|
||||
return ( i);
|
||||
}
|
||||
|
||||
/* initialize MAX3421E. Set Host mode, pullups, and stuff. Returns 0 if success, -1 if not */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
int8_t MAX3421e< SPI_SS, INTR >::Init() {
|
||||
XMEM_ACQUIRE_SPI();
|
||||
// Moved here.
|
||||
// you really should not init hardware in the constructor when it involves locks.
|
||||
// Also avoids the vbus flicker issue confusing some devices.
|
||||
/* pin and peripheral setup */
|
||||
SPI_SS::SetDirWrite();
|
||||
SPI_SS::Set();
|
||||
spi::init();
|
||||
INTR::SetDirRead();
|
||||
XMEM_RELEASE_SPI();
|
||||
/* MAX3421E - full-duplex SPI, level interrupt */
|
||||
// GPX pin on. Moved here, otherwise we flicker the vbus.
|
||||
regWr(rPINCTL, (bmFDUPSPI | bmINTLEVEL));
|
||||
|
||||
if(reset() == 0) { //OSCOKIRQ hasn't asserted in time
|
||||
return ( -1);
|
||||
}
|
||||
|
||||
regWr(rMODE, bmDPPULLDN | bmDMPULLDN | bmHOST); // set pull-downs, Host
|
||||
|
||||
regWr(rHIEN, bmCONDETIE | bmFRAMEIE); //connection detection
|
||||
|
||||
/* check if device is connected */
|
||||
regWr(rHCTL, bmSAMPLEBUS); // sample USB bus
|
||||
while(!(regRd(rHCTL) & bmSAMPLEBUS)); //wait for sample operation to finish
|
||||
|
||||
busprobe(); //check if anything is connected
|
||||
|
||||
regWr(rHIRQ, bmCONDETIRQ); //clear connection detect interrupt
|
||||
regWr(rCPUCTL, 0x01); //enable interrupt pin
|
||||
|
||||
return ( 0);
|
||||
}
|
||||
|
||||
/* initialize MAX3421E. Set Host mode, pullups, and stuff. Returns 0 if success, -1 if not */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
int8_t MAX3421e< SPI_SS, INTR >::Init(int mseconds) {
|
||||
XMEM_ACQUIRE_SPI();
|
||||
// Moved here.
|
||||
// you really should not init hardware in the constructor when it involves locks.
|
||||
// Also avoids the vbus flicker issue confusing some devices.
|
||||
/* pin and peripheral setup */
|
||||
SPI_SS::SetDirWrite();
|
||||
SPI_SS::Set();
|
||||
spi::init();
|
||||
INTR::SetDirRead();
|
||||
XMEM_RELEASE_SPI();
|
||||
/* MAX3421E - full-duplex SPI, level interrupt, vbus off */
|
||||
regWr(rPINCTL, (bmFDUPSPI | bmINTLEVEL | GPX_VBDET));
|
||||
|
||||
if(reset() == 0) { //OSCOKIRQ hasn't asserted in time
|
||||
return ( -1);
|
||||
}
|
||||
|
||||
// Delay a minimum of 1 second to ensure any capacitors are drained.
|
||||
// 1 second is required to make sure we do not smoke a Microdrive!
|
||||
if(mseconds < 1000) mseconds = 1000;
|
||||
delay(mseconds);
|
||||
|
||||
regWr(rMODE, bmDPPULLDN | bmDMPULLDN | bmHOST); // set pull-downs, Host
|
||||
|
||||
regWr(rHIEN, bmCONDETIE | bmFRAMEIE); //connection detection
|
||||
|
||||
/* check if device is connected */
|
||||
regWr(rHCTL, bmSAMPLEBUS); // sample USB bus
|
||||
while(!(regRd(rHCTL) & bmSAMPLEBUS)); //wait for sample operation to finish
|
||||
|
||||
busprobe(); //check if anything is connected
|
||||
|
||||
regWr(rHIRQ, bmCONDETIRQ); //clear connection detect interrupt
|
||||
regWr(rCPUCTL, 0x01); //enable interrupt pin
|
||||
|
||||
// GPX pin on. This is done here so that busprobe will fail if we have a switch connected.
|
||||
regWr(rPINCTL, (bmFDUPSPI | bmINTLEVEL));
|
||||
|
||||
return ( 0);
|
||||
}
|
||||
|
||||
/* probe bus to determine device presence and speed and switch host to this speed */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
void MAX3421e< SPI_SS, INTR >::busprobe() {
|
||||
uint8_t bus_sample;
|
||||
bus_sample = regRd(rHRSL); //Get J,K status
|
||||
bus_sample &= (bmJSTATUS | bmKSTATUS); //zero the rest of the byte
|
||||
switch(bus_sample) { //start full-speed or low-speed host
|
||||
case( bmJSTATUS):
|
||||
if((regRd(rMODE) & bmLOWSPEED) == 0) {
|
||||
regWr(rMODE, MODE_FS_HOST); //start full-speed host
|
||||
vbusState = FSHOST;
|
||||
} else {
|
||||
regWr(rMODE, MODE_LS_HOST); //start low-speed host
|
||||
vbusState = LSHOST;
|
||||
}
|
||||
break;
|
||||
case( bmKSTATUS):
|
||||
if((regRd(rMODE) & bmLOWSPEED) == 0) {
|
||||
regWr(rMODE, MODE_LS_HOST); //start low-speed host
|
||||
vbusState = LSHOST;
|
||||
} else {
|
||||
regWr(rMODE, MODE_FS_HOST); //start full-speed host
|
||||
vbusState = FSHOST;
|
||||
}
|
||||
break;
|
||||
case( bmSE1): //illegal state
|
||||
vbusState = SE1;
|
||||
break;
|
||||
case( bmSE0): //disconnected state
|
||||
regWr(rMODE, bmDPPULLDN | bmDMPULLDN | bmHOST | bmSEPIRQ);
|
||||
vbusState = SE0;
|
||||
break;
|
||||
}//end switch( bus_sample )
|
||||
}
|
||||
|
||||
/* MAX3421 state change task and interrupt handler */
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint8_t MAX3421e< SPI_SS, INTR >::Task(void) {
|
||||
uint8_t rcode = 0;
|
||||
uint8_t pinvalue;
|
||||
//USB_HOST_SERIAL.print("Vbus state: ");
|
||||
//USB_HOST_SERIAL.println( vbusState, HEX );
|
||||
pinvalue = INTR::IsSet(); //Read();
|
||||
//pinvalue = digitalRead( MAX_INT );
|
||||
if(pinvalue == 0) {
|
||||
rcode = IntHandler();
|
||||
}
|
||||
// pinvalue = digitalRead( MAX_GPX );
|
||||
// if( pinvalue == LOW ) {
|
||||
// GpxHandler();
|
||||
// }
|
||||
// usbSM(); //USB state machine
|
||||
return ( rcode);
|
||||
}
|
||||
|
||||
template< typename SPI_SS, typename INTR >
|
||||
uint8_t MAX3421e< SPI_SS, INTR >::IntHandler() {
|
||||
uint8_t HIRQ;
|
||||
uint8_t HIRQ_sendback = 0x00;
|
||||
HIRQ = regRd(rHIRQ); //determine interrupt source
|
||||
//if( HIRQ & bmFRAMEIRQ ) { //->1ms SOF interrupt handler
|
||||
// HIRQ_sendback |= bmFRAMEIRQ;
|
||||
//}//end FRAMEIRQ handling
|
||||
if(HIRQ & bmCONDETIRQ) {
|
||||
busprobe();
|
||||
HIRQ_sendback |= bmCONDETIRQ;
|
||||
}
|
||||
/* End HIRQ interrupts handling, clear serviced IRQs */
|
||||
regWr(rHIRQ, HIRQ_sendback);
|
||||
return ( HIRQ_sendback);
|
||||
}
|
||||
//template< typename SPI_SS, typename INTR >
|
||||
//uint8_t MAX3421e< SPI_SS, INTR >::GpxHandler()
|
||||
//{
|
||||
// uint8_t GPINIRQ = regRd( rGPINIRQ ); //read GPIN IRQ register
|
||||
//// if( GPINIRQ & bmGPINIRQ7 ) { //vbus overload
|
||||
//// vbusPwr( OFF ); //attempt powercycle
|
||||
//// delay( 1000 );
|
||||
//// vbusPwr( ON );
|
||||
//// regWr( rGPINIRQ, bmGPINIRQ7 );
|
||||
//// }
|
||||
// return( GPINIRQ );
|
||||
//}
|
||||
|
||||
#endif //_USBHOST_H_
|
||||
Loading…
Reference in new issue