diff --git a/Marlin/boards.h b/Marlin/boards.h index 07ee68a33..bf7be0edf 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -29,6 +29,7 @@ #define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2 #define BOARD_GEN7_13 12 // Gen7 v1.3 #define BOARD_GEN7_14 13 // Gen7 v1.4 +#define BOARD_CNCONTROLS_11 111 // Cartesio CN Controls V11 #define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12 #define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0 #define BOARD_SETHI 20 // Sethi 3D_1 diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h index 257eae5ba..b1dd40311 100644 --- a/Marlin/dogm_lcd_implementation.h +++ b/Marlin/dogm_lcd_implementation.h @@ -143,8 +143,13 @@ //U8GLIB_ST7920_128X64_RRD u8g(0,0,0); U8GLIB_ST7920_128X64_RRD u8g(0); #elif defined(CARTESIO_UI) - // The CartesioUI display with SW-SPI - U8GLIB_DOGM128 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); + // The CartesioUI display + #if DOGLCD_MOSI != -1 && DOGLCD_SCK != -1 + // using SW-SPI + U8GLIB_DOGM128 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); + #else + U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); + #endif #elif ENABLED(U8GLIB_LM6059_AF) // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250) U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index a97ec341c..12979304f 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -134,6 +134,7 @@ // The following define selects which electronics board you have. // Please choose the name from boards.h that matches your setup #ifndef MOTHERBOARD + //#define MOTHERBOARD BOARD_CNCONTROLS_11 #define MOTHERBOARD BOARD_CNCONTROLS_12 #endif diff --git a/Marlin/pins.h b/Marlin/pins.h index 1d4de00f8..880084588 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -31,6 +31,8 @@ #include "pins_GEN7_13.h" #elif MB(GEN7_14) #include "pins_GEN7_14.h" +#elif MB(CNCONTROLS_11) + #include "pins_CNCONTROLS_11.h" #elif MB(CNCONTROLS_12) #include "pins_CNCONTROLS_12.h" #elif MB(CHEAPTRONIC) @@ -422,4 +424,3 @@ #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) #endif //__PINS_H - diff --git a/Marlin/pins_CNCONTROLS_11.h b/Marlin/pins_CNCONTROLS_11.h new file mode 100644 index 000000000..1de35a2c1 --- /dev/null +++ b/Marlin/pins_CNCONTROLS_11.h @@ -0,0 +1,101 @@ +/** + * CartesioV11 pin assignments + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. +#endif + +#define BOARD_NAME "CN Controls V11" + +//#define LARGE_FLASH true + +#define X_ENABLE_PIN 35 +#define X_STEP_PIN 34 +#define X_DIR_PIN 36 +#define X_MIN_PIN 43 +#define X_MAX_PIN -1 + +#define Y_ENABLE_PIN 38 +#define Y_STEP_PIN 37 +#define Y_DIR_PIN 39 +#define Y_MIN_PIN 45 +#define Y_MAX_PIN -1 + +#define Z_ENABLE_PIN 41 +#define Z_STEP_PIN 40 +#define Z_DIR_PIN 48 +#define Z_MIN_PIN 42 +#define Z_MAX_PIN -1 + +#define E0_ENABLE_PIN 3 +#define E0_STEP_PIN 29 +#define E0_DIR_PIN 28 +#define HEATER_0_PIN 5 +#define TEMP_0_PIN 0 // ANALOG INPUT !! + +#define E1_ENABLE_PIN 60 +#define E1_STEP_PIN 61 +#define E1_DIR_PIN 62 +#define HEATER_1_PIN 58 +#define TEMP_1_PIN 3 // 3 for tool2 -> 2 for chambertemp + +#define E2_ENABLE_PIN 16 +#define E2_STEP_PIN 15 +#define E2_DIR_PIN 14 +#define HEATER_2_PIN 64 +#define TEMP_2_PIN 2 // 9 for tool3 -> 2 for chambertemp + +#define E3_ENABLE_PIN 47 +#define E3_STEP_PIN 44 +#define E3_DIR_PIN 49 +#define HEATER_3_PIN 46 +#define TEMP_3_PIN 11 // 11 for tool4 -> 2 for chambertemp + +#define HEATER_BED_PIN 2 +#define TEMP_BED_PIN 1 // ANALOG INPUT !! + +// Tools + +//#define TOOL_0_PIN 4 +//#define TOOL_1_PIN 59 +//#define TOOL_2_PIN 8 +//#define TOOL_3_PIN 30 +//#define TOOL_PWM_PIN 7 // common PWM pin for all tools + +// Common I/O + +//#define TEMP_CHAMBER_PIN 2 // ANALOG INPUT !! +//#define FIL_RUNOUT_PIN -1 +//#define PWM_1_PIN 11 +//#define PWM_2_PIN 10 +//#define SPARE_IO 12 +//#define FAN_PIN 7 // common PWM pin for all tools + +// User interface +#define BEEPER_PIN 6 + +// Pins for DOGM SPI LCD Support +#define DOGLCD_A0 26 +#define DOGLCD_CS 24 +#define DOGLCD_MOSI -1 +#define DOGLCD_SCK -1 + +// The encoder and click button +#define BTN_EN1 23 +#define BTN_EN2 25 +#define BTN_ENC 27 + +// Hardware buttons for manual movement of XYZ +#define SHIFT_OUT 19 +#define SHIFT_LD 18 +#define SHIFT_CLK 17 + +//#define UI1 31 +//#define UI2 22 + +// Other +#define SDSS 53 +#define SD_DETECT_PIN 13 +#define STAT_LED_BLUE -1 +#define STAT_LED_RED 31 diff --git a/Marlin/pins_CNCONTROLS_12.h b/Marlin/pins_CNCONTROLS_12.h index f1de6c11a..cb338346d 100644 --- a/Marlin/pins_CNCONTROLS_12.h +++ b/Marlin/pins_CNCONTROLS_12.h @@ -32,13 +32,13 @@ #define E0_STEP_PIN 57 #define E0_DIR_PIN 55 #define HEATER_0_PIN 11 -#define TEMP_0_PIN 0 // ANALOG INPUT !! +#define TEMP_0_PIN 0 // ANALOG INPUT !! #define E1_ENABLE_PIN 60 #define E1_STEP_PIN 61 #define E1_DIR_PIN 62 #define HEATER_1_PIN 9 -#define TEMP_1_PIN 9 // 9 for tool3 -> 13 for chambertemp +#define TEMP_1_PIN 9 // 9 for tool2 -> 13 for chambertemp #define E2_ENABLE_PIN 44 #define E2_STEP_PIN 46 @@ -86,9 +86,9 @@ #define LCD_SCREEN_ROT_180 // The encoder and click button -#define BTN_EN1 36 -#define BTN_EN2 34 -#define BTN_ENC 38 +#define BTN_EN1 36 +#define BTN_EN2 34 +#define BTN_ENC 38 // Hardware buttons for manual movement of XYZ #define SHIFT_OUT 42