diff --git a/.travis.yml b/.travis.yml index 16bf75043..12b4af996 100644 --- a/.travis.yml +++ b/.travis.yml @@ -155,7 +155,7 @@ script: # INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT # - restore_configs - - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT + - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT - build_marlin # # Mixing Extruder diff --git a/Marlin/M100_Free_Mem_Chk.cpp b/Marlin/M100_Free_Mem_Chk.cpp index 01709c5d2..de61d5bb2 100644 --- a/Marlin/M100_Free_Mem_Chk.cpp +++ b/Marlin/M100_Free_Mem_Chk.cpp @@ -26,227 +26,238 @@ * This code watches the free memory block between the bottom of the heap and the top of the stack. * This memory block is initialized and watched via the M100 command. * - * M100 I Initializes the free memory block and prints vitals statistics about the area - * M100 F Identifies how much of the free memory block remains free and unused. It also - * detects and reports any corruption within the free memory block that may have - * happened due to errant firmware. - * M100 D Does a hex display of the free memory block along with a flag for any errant - * data that does not match the expected value. - * M100 C x Corrupts x locations within the free memory block. This is useful to check the - * correctness of the M100 F and M100 D commands. + * M100 I Initializes the free memory block and prints vitals statistics about the area + * + * M100 F Identifies how much of the free memory block remains free and unused. It also + * detects and reports any corruption within the free memory block that may have + * happened due to errant firmware. + * + * M100 D Does a hex display of the free memory block along with a flag for any errant + * data that does not match the expected value. + * + * M100 C x Corrupts x locations within the free memory block. This is useful to check the + * correctness of the M100 F and M100 D commands. * * Initial version by Roxy-3D */ -#define M100_FREE_MEMORY_DUMPER // Comment out to remove Dump sub-command -#define M100_FREE_MEMORY_CORRUPTOR // Comment out to remove Corrupt sub-command +#define M100_FREE_MEMORY_DUMPER // Enable for the `M110 D` Dump sub-command +#define M100_FREE_MEMORY_CORRUPTOR // Enable for the `M100 C` Corrupt sub-command -#include "Marlin.h" +#include "MarlinConfig.h" #if ENABLED(M100_FREE_MEMORY_WATCHER) + +#define TEST_BYTE 0xE5 + extern char* __brkval; extern size_t __heap_start, __heap_end, __flp; extern char __bss_end; +#include "Marlin.h" +#include "hex_print_routines.h" + // -// Utility functions used by M100 to get its work done. +// Utility functions // -#include "hex_print_routines.h" +#define END_OF_HEAP() (__brkval ? __brkval : &__bss_end) -char* top_of_stack(); -int how_many_E5s_are_here(char*); -int free_memory_is_corrupted(); // int not bool!!!! it will tell us how many blocks of - // free memory it found. -void gcode_M100() { - static bool m100_not_initialized = true; - char* sp, *ptr; - int i, j, n; - // - // M100 D dumps the free memory block from __brkval to the stack pointer. - // malloc() eats memory from the start of the block and the stack grows - // up from the bottom of the block. Solid 0xE5's indicate nothing has - // used that memory yet. There should not be anything but 0xE5's within - // the block of 0xE5's. If there is, that would indicate memory corruption - // probably caused by bad pointers. Any unexpected values will be flagged in - // the right hand column to help spotting them. - // - SERIAL_ECHOPAIR("\n__brkval : 0x", hex_word((uint16_t)__brkval) ); - SERIAL_ECHOPAIR("\n__bss_end : 0x", hex_word((uint16_t)&__bss_end)); - // - // With out malloc() we need to be smart and use &__bss_end - // - ptr = __brkval ? __brkval : &__bss_end; - SERIAL_ECHOPAIR("\nstart of free space : 0x", hex_word((uint16_t)ptr)); - - sp = top_of_stack(); - SERIAL_ECHOLNPAIR("\nStack Pointer : 0x", hex_word((uint16_t)sp)); - - #if ENABLED(M100_FREE_MEMORY_DUMPER) // Disable to remove Dump sub-command - if (code_seen('D')) { - // - // We want to start and end the dump on a nice 16 byte boundry even though - // the values we are using are not 16 byte aligned. - // - ptr = (char*) ((uint16_t) ptr & 0xfff0); - sp = (char*) ((uint16_t) sp | 0x000f); - - n = sp - ptr; - // - // This is the main loop of the Dump command. - // - while (ptr < sp) { - print_hex_word((uint16_t)ptr); // Print the address - SERIAL_CHAR(':'); - for (i = 0; i < 16; i++) { // and 16 data bytes - if (i==8) - SERIAL_CHAR('-'); - print_hex_byte(*(ptr + i)); - SERIAL_CHAR(' '); - } - SERIAL_CHAR('|'); // now show where non 0xE5's are - for (i = 0; i < 16; i++) - SERIAL_CHAR((*(ptr + i) == (char)0xe5) ? ' ' : '?'); - SERIAL_EOL; - ptr += 16; - idle(); +// Location of a variable on its stack frame. Returns a value above +// the stack (once the function returns to the caller). +char* top_of_stack() { + char x; + return &x + 1; // x is pulled on return; +} + +// Count the number of test bytes at the specified location. +int16_t count_test_bytes(const char * const ptr) { + for (uint16_t i = 0; i < 32000; i++) + if (ptr[i] != TEST_BYTE) + return i - 1; + + return -1; +} + +// Return a count of free memory blocks. +uint16_t free_memory_is_corrupted(char * const ptr, const uint16_t size) { + // Find the longest block of test bytes in the given buffer + uint16_t block_cnt = 0; + for (uint16_t i = 0; i < size; i++) { + if (ptr[i] == TEST_BYTE) { + const uint16_t j = count_test_bytes(ptr + i); + if (j > 8) { + //SERIAL_ECHOPAIR("Found ", j); + //SERIAL_ECHOLNPAIR(" bytes free at 0x", hex_word((uint16_t)ptr + i)); + i += j; + block_cnt++; } - return; } - #endif - // - // M100 F requests the code to return the number of free bytes in the memory pool along with - // other vital statistics that define the memory pool. - // - if (code_seen('F')) { - int max_cnt = -1, block_cnt = 0; - uint16_t max_addr=0; - ptr = __brkval ? __brkval : &__bss_end; - sp = top_of_stack(); - n = sp - ptr; - // Scan through the range looking for the biggest block of 0xE5's we can find - for (i = 0; i < n; i++) { - if (*(ptr + i) == (char)0xe5) { - j = how_many_E5s_are_here(ptr + i); - if (j > 8) { - SERIAL_ECHOPAIR("Found ", j); - SERIAL_ECHOLNPAIR(" bytes free at 0x", hex_word((uint16_t)(ptr + i))); - if (j > max_cnt) { - max_cnt = j; - max_addr = (uint16_t) ptr + i; - } - i += j; - block_cnt++; - } + } + //if (block_cnt > 1) { + // SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area."); + // SERIAL_ECHOLNPAIR("\nLargest free block is ", max_cnt); + //} + return block_cnt; +} + +// +// M100 sub-commands +// + +#if ENABLED(M100_FREE_MEMORY_DUMPER) + /** + * M100 D + * Dump the free memory block from __brkval to the stack pointer. + * malloc() eats memory from the start of the block and the stack grows + * up from the bottom of the block. Solid test bytes indicate nothing has + * used that memory yet. There should not be anything but test bytes within + * the block. If so, it may indicate memory corruption due to a bad pointer. + * Unexpected bytes are flagged in the right column. + */ + void dump_free_memory(char *ptr, char *sp) { + // + // Start and end the dump on a nice 16 byte boundary + // (even though the values are not 16-byte aligned). + // + ptr = (char*)((uint16_t)ptr & 0xFFF0); // Align to 16-byte boundary + sp = (char*)((uint16_t)sp | 0x000F); // Align sp to the 15th byte (at or above sp) + + // Dump command main loop + while (ptr < sp) { + print_hex_word((uint16_t)ptr); // Print the address + SERIAL_CHAR(':'); + for (uint8_t i = 0; i < 16; i++) { // and 16 data bytes + if (i == 8) SERIAL_CHAR('-'); + print_hex_byte(ptr[i]); + SERIAL_CHAR(' '); } + SERIAL_CHAR('|'); // Point out non test bytes + for (uint8_t i = 0; i < 16; i++) + SERIAL_CHAR(ptr[i] == TEST_BYTE ? ' ' : '?'); + SERIAL_EOL; + ptr += 16; + idle(); } - if (block_cnt > 1) { - SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area."); - SERIAL_ECHOPAIR("\nLargest free block is ", max_cnt); - SERIAL_ECHOLNPAIR(" bytes big at 0x", hex_word(max_addr)); + } +#endif // M100_FREE_MEMORY_DUMPER + +/** + * M100 F + * Return the number of free bytes in the memory pool, + * with other vital statistics defining the pool. + */ +void free_memory_pool_report(const char * const ptr, const uint16_t size) { + int16_t max_cnt = -1; + uint16_t block_cnt = 0; + char *max_addr = NULL; + // Find the longest block of test bytes in the buffer + for (uint16_t i = 0; i < size; i++) { + char * const addr = ptr + i; + if (*addr == TEST_BYTE) { + const uint16_t j = count_test_bytes(addr); + if (j > 8) { + SERIAL_ECHOPAIR("Found ", j); + SERIAL_ECHOLNPAIR(" bytes free at 0x", hex_word((uint16_t)addr)); + if (j > max_cnt) { + max_cnt = j; + max_addr = addr; + } + i += j; + block_cnt++; + } } - SERIAL_ECHOLNPAIR("free_memory_is_corrupted() = ", free_memory_is_corrupted()); - return; } - // - // M100 C x Corrupts x locations in the free memory pool and reports the locations of the corruption. - // This is useful to check the correctness of the M100 D and the M100 F commands. - // - #if ENABLED(M100_FREE_MEMORY_CORRUPTOR) + if (block_cnt > 1) { + SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area."); + SERIAL_ECHOPAIR("\nLargest free block is ", max_cnt); + SERIAL_ECHOLNPAIR(" bytes at 0x", hex_word((uint16_t)max_addr)); + } + SERIAL_ECHOLNPAIR("free_memory_is_corrupted() = ", free_memory_is_corrupted(ptr, size)); +} + +#if ENABLED(M100_FREE_MEMORY_CORRUPTOR) + /** + * M100 C + * Corrupt locations in the free memory pool and report the corrupt addresses. + * This is useful to check the correctness of the M100 D and the M100 F commands. + */ + void corrupt_free_memory(char *ptr, const uint16_t size) { if (code_seen('C')) { - int x = code_value_int(); // x gets the # of locations to corrupt within the memory pool - SERIAL_ECHOLNPGM("Corrupting free memory block.\n"); ptr += 8; - sp = top_of_stack(); - n = sp - ptr - 250; // -250 just to keep us from finding interrupt activity that - // has altered the stack. - j = n / (x + 1); - for (i = 1; i <= x; i++) { - *(ptr + (i * j)) = i; - SERIAL_ECHOPAIR("\nCorrupting address: 0x", hex_word((uint16_t)(ptr + i * j))); - } - SERIAL_ECHOLNPGM("\n"); - return; - } - #endif - // - // M100 I Initializes the free memory pool so it can be watched and prints vital - // statistics that define the free memory pool. - // - if (m100_not_initialized || code_seen('I')) { // If no sub-command is specified, the first time - SERIAL_ECHOLNPGM("Initializing free memory block.\n"); // this happens, it will Initialize. - // Repeated M100 with no sub-command will not destroy the - // state of the initialized free memory pool. - ptr += 8; - SERIAL_ECHOLNPGM("\n"); - n = sp - ptr - 250; // -250 just to keep us from finding interrupt activity that - // has altered the stack. - SERIAL_ECHO(n); - SERIAL_ECHOLNPGM(" bytes of memory initialized.\n"); - for (i = 0; i < n; i++) - *(ptr + i) = (char)0xe5; - for (i = 0; i < n; i++) { - if (*(ptr + i) != (char)0xe5) { - SERIAL_ECHOPAIR("? address : ", hex_word(ptr+i) ); - SERIAL_ECHOPAIR("=", hex_byte(*(ptr + i)) ); - SERIAL_ECHOLNPGM("\n"); + const uint16_t near_top = top_of_stack() - ptr - 250, // -250 to avoid interrupt activity that's altered the stack. + j = near_top / (size + 1); + + SERIAL_ECHOLNPGM("Corrupting free memory block.\n"); + for (uint16_t i = 1; i <= size; i++) { + char * const addr = ptr + i * j; + *addr = i; + SERIAL_ECHOPAIR("\nCorrupting address: 0x", hex_word((uint16_t)addr)); } + SERIAL_EOL; } - m100_not_initialized = false; - return; } - return; -} +#endif // M100_FREE_MEMORY_CORRUPTOR -// top_of_stack() returns the location of a variable on its stack frame. The value returned is above -// the stack once the function returns to the caller. +/** + * M100 I + * Init memory for the M100 tests. (Automatically applied on the first M100.) + */ +void init_free_memory(char *ptr, int16_t size) { + SERIAL_ECHOLNPGM("Initializing free memory block.\n\n"); -char* top_of_stack() { - char x; - return &x + 1; // x is pulled on return; -} + size -= 250; // -250 to avoid interrupt activity that's altered the stack. + if (size < 0) return; -// how_many_E5s_are_here() is a utility function to easily find out how many 0xE5's are -// at the specified location. Having this logic as a function simplifies the search code. -// -int how_many_E5s_are_here(char* p) { - int n; - for (n = 0; n < 32000; n++) { - if (*(p + n) != (char)0xe5) - return n - 1; + ptr += 8; + memset(ptr, TEST_BYTE, size); + + SERIAL_ECHO(size); + SERIAL_ECHOLNPGM(" bytes of memory initialized.\n"); + + for (uint16_t i = 0; i < size; i++) { + if (ptr[i] != TEST_BYTE) { + SERIAL_ECHOPAIR("? address : 0x", hex_word((uint16_t)ptr + i)); + SERIAL_ECHOPAIR("=", hex_byte(ptr[i])); + SERIAL_EOL; SERIAL_EOL; + } } - return -1; } +/** + * M100: Free Memory Check + */ +void gcode_M100() { + SERIAL_ECHOPAIR("\n__brkval : 0x", hex_word((uint16_t)__brkval)); + SERIAL_ECHOPAIR("\n__bss_end : 0x", hex_word((uint16_t)&__bss_end)); -int free_memory_is_corrupted() { - char *sp, *ptr; - int block_cnt = 0, i, j, n; + char *ptr = END_OF_HEAP(), *sp = top_of_stack(); - ptr = __brkval ? __brkval : &__bss_end; - sp = top_of_stack(); + SERIAL_ECHOPAIR("\nstart of free space : 0x", hex_word((uint16_t)ptr)); + SERIAL_ECHOLNPAIR("\nStack Pointer : 0x", hex_word((uint16_t)sp)); - n = sp - ptr; + // Always init on the first invocation of M100 + static bool m100_not_initialized = true; + if (m100_not_initialized || code_seen('I')) { + m100_not_initialized = false; + init_free_memory(ptr, sp - ptr); + } - // Scan through the range looking for the biggest block of 0xE5's we can find - for (i = 0; i < n; i++) { - if (*(ptr + i) == (char)0xe5) { - j = how_many_E5s_are_here(ptr + i); - if (j > 8) { -// SERIAL_ECHOPAIR("Found ", j); -// SERIAL_ECHOLNPAIR(" bytes free at 0x", hex_word((uint16_t)(ptr + i))); + #if ENABLED(M100_FREE_MEMORY_DUMPER) - i += j; - block_cnt++; - } - } - } + if (code_seen('D')) + return dump_free_memory(ptr, sp); -// if (block_cnt > 1) { -// SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area."); -// SERIAL_ECHOLNPAIR("\nLargest free block is ", max_cnt); -// } - return block_cnt; - } + #endif -#endif + if (code_seen('F')) + return free_memory_pool_report(ptr, sp - ptr); + + #if ENABLED(M100_FREE_MEMORY_CORRUPTOR) + + if (code_seen('C')) + return corrupt_free_memory(ptr, code_value_int()); + + #endif +} +#endif // M100_FREE_MEMORY_WATCHER diff --git a/Marlin/hex_print_routines.cpp b/Marlin/hex_print_routines.cpp index 9218f9f84..02b07754d 100644 --- a/Marlin/hex_print_routines.cpp +++ b/Marlin/hex_print_routines.cpp @@ -43,7 +43,7 @@ char* hex_word(const uint16_t w) { return _hex; } -void print_hex_nybble(const uint8_t n) { SERIAL_CHAR(hex_nybble(n)); } +void print_hex_nybble(const uint8_t n) { SERIAL_CHAR(hex_nybble(n)); } void print_hex_byte(const uint8_t b) { SERIAL_ECHO(hex_byte(b)); } void print_hex_word(const uint16_t w) { SERIAL_ECHO(hex_word(w)); } diff --git a/Marlin/hex_print_routines.h b/Marlin/hex_print_routines.h index 5956a72ee..c5c4f759f 100644 --- a/Marlin/hex_print_routines.h +++ b/Marlin/hex_print_routines.h @@ -42,4 +42,4 @@ void print_hex_byte(const uint8_t b); void print_hex_word(const uint16_t w); #endif // AUTO_BED_LEVELING_UBL || M100_FREE_MEMORY_WATCHER -#endif // HEX_PRINT_ROUTINES_H \ No newline at end of file +#endif // HEX_PRINT_ROUTINES_H