Make Z_RAISE_BETWEEN_PROBINGS a more general option

8 years ago · b590a7dee0
parent bb9c67b4b5
commit b590a7dee0
20 changed files with 20 additions and 40 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -517,6 +517,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -670,8 +671,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@ -516,6 +516,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -669,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -499,6 +499,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -652,8 +653,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@ -497,6 +497,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -650,8 +651,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -509,6 +509,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -662,8 +663,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@ -511,6 +511,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 5    // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 5     // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 2  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -664,8 +665,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 2  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -534,6 +534,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -687,8 +688,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -517,6 +517,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -670,8 +671,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@ -511,6 +511,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -664,8 +665,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -525,6 +525,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -678,8 +679,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@ -538,6 +538,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -691,8 +692,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -509,6 +509,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -662,8 +663,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -517,6 +517,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -670,8 +671,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@ -596,6 +596,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -753,8 +754,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -590,6 +590,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -747,8 +748,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -593,6 +593,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -750,8 +751,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@ -587,6 +587,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 100  // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -744,8 +745,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -588,6 +588,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 20   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 20    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 10 // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -745,8 +746,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 10 // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -520,6 +520,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -673,8 +674,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.

--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -507,6 +507,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.

 //
 // For M851 give a range for adjusting the Z probe offset
@ -660,8 +661,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo

  #endif // !AUTO_BED_LEVELING_GRID

-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
  //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                             // Useful to retract a deployable Z probe.