From 2faed961ceae7b9b653d1c8315846b7260e61d11 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 30 Mar 2015 16:39:47 -0700 Subject: [PATCH 1/4] Allow POWER_SUPPLY 0 for no power switch --- Marlin/Conditionals.h | 7 +- Marlin/Marlin_main.cpp | 82 +++++++-------- Marlin/ultralcd.cpp | 223 +++++++++++++++++++---------------------- 3 files changed, 147 insertions(+), 165 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index c72f9d13e..5df6424b8 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -265,16 +265,15 @@ #ifndef POWER_SUPPLY #define POWER_SUPPLY 1 #endif - // 1 = ATX - #if (POWER_SUPPLY == 1) + #if (POWER_SUPPLY == 1) // 1 = ATX #define PS_ON_AWAKE LOW #define PS_ON_ASLEEP HIGH #endif - // 2 = X-Box 360 203W - #if (POWER_SUPPLY == 2) + #if (POWER_SUPPLY == 2) // 2 = X-Box 360 203W #define PS_ON_AWAKE HIGH #define PS_ON_ASLEEP LOW #endif + HAS_POWER_SWITCH = POWER_SUPPLY > 0 && defined(PS_ON_PIN) && PS_ON_PIN >= 0 /** * Temp Sensor defines diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 67821b46a..854bf5953 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -168,12 +168,12 @@ // M401 - Lower z-probe if present // M402 - Raise z-probe if present // M404 - N Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters -// M405 - Turn on Filament Sensor extrusion control. Optional D to set delay in centimeters between sensor and extruder -// M406 - Turn off Filament Sensor extrusion control -// M407 - Displays measured filament diameter +// M405 - Turn on Filament Sensor extrusion control. Optional D to set delay in centimeters between sensor and extruder +// M406 - Turn off Filament Sensor extrusion control +// M407 - Display measured filament diameter // M500 - Store parameters in EEPROM // M501 - Read parameters from EEPROM (if you need reset them after you changed them temporarily). -// M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings. // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] @@ -310,14 +310,14 @@ int fanSpeed = 0; bool cancel_heatup = false; #ifdef FILAMENT_SENSOR - //Variables for Filament Sensor input - float filament_width_nominal=DEFAULT_NOMINAL_FILAMENT_DIA; //Set nominal filament width, can be changed with M404 - bool filament_sensor=false; //M405 turns on filament_sensor control, M406 turns it off - float filament_width_meas=DEFAULT_MEASURED_FILAMENT_DIA; //Stores the measured filament diameter - signed char measurement_delay[MAX_MEASUREMENT_DELAY+1]; //ring buffer to delay measurement store extruder factor after subtracting 100 - int delay_index1=0; //index into ring buffer - int delay_index2=-1; //index into ring buffer - set to -1 on startup to indicate ring buffer needs to be initialized - float delay_dist=0; //delay distance counter + //Variables for Filament Sensor input + float filament_width_nominal = DEFAULT_NOMINAL_FILAMENT_DIA; //Set nominal filament width, can be changed with M404 + bool filament_sensor = false; //M405 turns on filament_sensor control, M406 turns it off + float filament_width_meas = DEFAULT_MEASURED_FILAMENT_DIA; //Stores the measured filament diameter + signed char measurement_delay[MAX_MEASUREMENT_DELAY+1]; //ring buffer to delay measurement store extruder factor after subtracting 100 + int delay_index1 = 0; //index into ring buffer + int delay_index2 = -1; //index into ring buffer - set to -1 on startup to indicate ring buffer needs to be initialized + float delay_dist = 0; //delay distance counter int meas_delay_cm = MEASUREMENT_DELAY_CM; //distance delay setting #endif @@ -516,7 +516,7 @@ void setup_powerhold() #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 OUT_WRITE(SUICIDE_PIN, HIGH); #endif - #if defined(PS_ON_PIN) && PS_ON_PIN > -1 + #if HAS_POWER_SWITCH #if defined(PS_DEFAULT_OFF) OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); #else @@ -898,7 +898,7 @@ bool code_seen(char code) { strchr_pointer = strchr(cmdbuffer[bufindr], code); return (strchr_pointer != NULL); //Return True if a character was found } - + #define DEFINE_PGM_READ_ANY(type, reader) \ static inline type pgm_read_any(const type *p) \ { return pgm_read_##reader##_near(p); } @@ -3291,7 +3291,7 @@ inline void gcode_M140() { if (code_seen('S')) setTargetBed(code_value()); } -#if defined(PS_ON_PIN) && PS_ON_PIN > -1 +#if HAS_POWER_SWITCH /** * M80: Turn on Power Supply @@ -3313,33 +3313,33 @@ inline void gcode_M140() { #endif } -#endif // PS_ON_PIN - -/** - * M81: Turn off Power Supply - */ -inline void gcode_M81() { - disable_heater(); - st_synchronize(); - disable_e0(); - disable_e1(); - disable_e2(); - disable_e3(); - finishAndDisableSteppers(); - fanSpeed = 0; - delay(1000); // Wait 1 second before switching off - #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 + /** + * M81: Turn off Power Supply + */ + inline void gcode_M81() { + disable_heater(); st_synchronize(); - suicide(); - #elif defined(PS_ON_PIN) && PS_ON_PIN > -1 - OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); - #endif - #ifdef ULTIPANEL - powersupply = false; - LCD_MESSAGEPGM(MACHINE_NAME " " MSG_OFF "."); - lcd_update(); - #endif -} + disable_e0(); + disable_e1(); + disable_e2(); + disable_e3(); + finishAndDisableSteppers(); + fanSpeed = 0; + delay(1000); // Wait 1 second before switching off + #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 + st_synchronize(); + suicide(); + #elif HAS_POWER_SWITCH + OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); + #endif + #ifdef ULTIPANEL + powersupply = false; + LCD_MESSAGEPGM(MACHINE_NAME " " MSG_OFF "."); + lcd_update(); + #endif + } + +#endif // PS_ON_PIN /** * M82: Set E codes absolute (default) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 58a66973f..96bba79b0 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -616,6 +616,7 @@ static void lcd_prepare_menu() { MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets); //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0")); + #if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0 MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu); @@ -625,15 +626,16 @@ static void lcd_prepare_menu() { MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); #endif #endif + MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); - #if defined(POWER_SUPPLY) && POWER_SUPPLY > 0 && defined(PS_ON_PIN) && PS_ON_PIN > -1 - if (powersupply) { + + #if HAS_POWER_SWITCH + if (powersupply) MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); - } - else { + else MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); - } #endif + MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); #if defined(MANUAL_BED_LEVELING) @@ -1338,7 +1340,7 @@ void lcd_update() { } lastEncoderMovementMillis = ms; - } + } // encoderRateMultiplierEnabled #endif //ENCODER_RATE_MULTIPLIER lcdDrawUpdate = 1; @@ -1541,70 +1543,62 @@ bool lcd_clicked() { return LCD_CLICKED; } #endif //ULTIPANEL -/********************************/ -/** Float conversion utilities **/ -/********************************/ -// convert float to string with +123.4 format +/*********************************/ +/** Number to string conversion **/ +/*********************************/ + char conv[8]; -char *ftostr3(const float &x) -{ + +// Convert float to string with +123.4 format +char *ftostr3(const float &x) { return itostr3((int)x); } -char *itostr2(const uint8_t &x) -{ +// Convert int to string with 12 format +char *itostr2(const uint8_t &x) { //sprintf(conv,"%5.1f",x); - int xx=x; - conv[0]=(xx/10)%10+'0'; - conv[1]=(xx)%10+'0'; - conv[2]=0; + int xx = x; + conv[0] = (xx / 10) % 10 + '0'; + conv[1] = xx % 10 + '0'; + conv[2] = 0; return conv; } -// Convert float to string with 123.4 format, dropping sign -char *ftostr31(const float &x) -{ - int xx=x*10; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]=(xx/10)%10+'0'; - conv[4]='.'; - conv[5]=(xx)%10+'0'; - conv[6]=0; +// Convert float to string with +123.4 format +char *ftostr31(const float &x) { + int xx = abs(x * 10); + conv[0] = (x >= 0) ? '+' : '-'; + conv[1] = (xx / 1000) % 10 + '0'; + conv[2] = (xx / 100) % 10 + '0'; + conv[3] = (xx / 10) % 10 + '0'; + conv[4] = '.'; + conv[5] = xx % 10 + '0'; + conv[6] = 0; return conv; } -// Convert float to string with 123.4 format -char *ftostr31ns(const float &x) -{ - int xx=x*10; - //conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[0]=(xx/1000)%10+'0'; - conv[1]=(xx/100)%10+'0'; - conv[2]=(xx/10)%10+'0'; - conv[3]='.'; - conv[4]=(xx)%10+'0'; - conv[5]=0; +// Convert float to string with 123.4 format, dropping sign +char *ftostr31ns(const float &x) { + int xx = abs(x * 10); + conv[0] = (xx / 1000) % 10 + '0'; + conv[1] = (xx / 100) % 10 + '0'; + conv[2] = (xx / 10) % 10 + '0'; + conv[3] = '.'; + conv[4] = xx % 10 + '0'; + conv[5] = 0; return conv; } -char *ftostr32(const float &x) -{ - long xx=x*100; - if (xx >= 0) - conv[0]=(xx/10000)%10+'0'; - else - conv[0]='-'; - xx=abs(xx); - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]='.'; - conv[4]=(xx/10)%10+'0'; - conv[5]=(xx)%10+'0'; - conv[6]=0; +// Convert float to string with 123.4 format +char *ftostr32(const float &x) { + long xx = abs(x * 100); + conv[0] = x >= 0 ? (xx / 10000) % 10 + '0' : '-'; + conv[1] = (xx / 1000) % 10 + '0'; + conv[2] = (xx / 100) % 10 + '0'; + conv[3] = '.'; + conv[4] = (xx / 10) % 10 + '0'; + conv[5] = xx % 10 + '0'; + conv[6] = 0; return conv; } @@ -1625,7 +1619,7 @@ char *ftostr43(const float &x) return conv; } -//Float to string with 1.23 format +// Convert float to string with 1.23 format char *ftostr12ns(const float &x) { long xx=x*100; @@ -1639,7 +1633,7 @@ char *ftostr12ns(const float &x) return conv; } -// convert float to space-padded string with -_23.4_ format +// Convert float to space-padded string with -_23.4_ format char *ftostr32sp(const float &x) { long xx = abs(x * 100); uint8_t dig; @@ -1685,58 +1679,51 @@ char *ftostr32sp(const float &x) { return conv; } -char *itostr31(const int &xx) -{ - conv[0]=(xx>=0)?'+':'-'; - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]=(xx/10)%10+'0'; - conv[4]='.'; - conv[5]=(xx)%10+'0'; - conv[6]=0; +// Convert int to lj string with +123.0 format +char *itostr31(const int &x) { + conv[0] = x >= 0 ? '+' : '-'; + int xx = abs(x); + conv[1] = (xx / 100) % 10 + '0'; + conv[2] = (xx / 10) % 10 + '0'; + conv[3] = xx % 10 + '0'; + conv[4] = '.'; + conv[5] = '0'; + conv[6] = 0; return conv; } // Convert int to rj string with 123 or -12 format -char *itostr3(const int &x) -{ +char *itostr3(const int &x) { int xx = x; if (xx < 0) { - conv[0]='-'; + conv[0] = '-'; xx = -xx; - } else if (xx >= 100) - conv[0]=(xx/100)%10+'0'; - else - conv[0]=' '; - if (xx >= 10) - conv[1]=(xx/10)%10+'0'; + } else - conv[1]=' '; - conv[2]=(xx)%10+'0'; - conv[3]=0; + conv[0] = xx >= 100 ? (xx / 100) % 10 + '0' : ' '; + + conv[1] = xx >= 10 ? (xx / 10) % 10 + '0' : ' '; + conv[2] = xx % 10 + '0'; + conv[3] = 0; return conv; } // Convert int to lj string with 123 format -char *itostr3left(const int &xx) -{ - if (xx >= 100) - { - conv[0]=(xx/100)%10+'0'; - conv[1]=(xx/10)%10+'0'; - conv[2]=(xx)%10+'0'; - conv[3]=0; +char *itostr3left(const int &xx) { + if (xx >= 100) { + conv[0] = (xx / 100) % 10 + '0'; + conv[1] = (xx / 10) % 10 + '0'; + conv[2] = xx % 10 + '0'; + conv[3] = 0; } - else if (xx >= 10) - { - conv[0]=(xx/10)%10+'0'; - conv[1]=(xx)%10+'0'; - conv[2]=0; + else if (xx >= 10) { + conv[0] = (xx / 10) % 10 + '0'; + conv[1] = xx % 10 + '0'; + conv[2] = 0; } - else - { - conv[0]=(xx)%10+'0'; - conv[1]=0; + else { + conv[0] = xx % 10 + '0'; + conv[1] = 0; } return conv; } @@ -1764,34 +1751,30 @@ char *ftostr5(const float &x) { } // Convert float to string with +1234.5 format -char *ftostr51(const float &x) -{ - long xx=x*10; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/10000)%10+'0'; - conv[2]=(xx/1000)%10+'0'; - conv[3]=(xx/100)%10+'0'; - conv[4]=(xx/10)%10+'0'; - conv[5]='.'; - conv[6]=(xx)%10+'0'; - conv[7]=0; +char *ftostr51(const float &x) { + long xx = abs(x * 10); + conv[0] = (x >= 0) ? '+' : '-'; + conv[1] = (xx / 10000) % 10 + '0'; + conv[2] = (xx / 1000) % 10 + '0'; + conv[3] = (xx / 100) % 10 + '0'; + conv[4] = (xx / 10) % 10 + '0'; + conv[5] = '.'; + conv[6] = xx % 10 + '0'; + conv[7] = 0; return conv; } // Convert float to string with +123.45 format -char *ftostr52(const float &x) -{ - long xx=x*100; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/10000)%10+'0'; - conv[2]=(xx/1000)%10+'0'; - conv[3]=(xx/100)%10+'0'; - conv[4]='.'; - conv[5]=(xx/10)%10+'0'; - conv[6]=(xx)%10+'0'; - conv[7]=0; +char *ftostr52(const float &x) { + conv[0] = (x >= 0) ? '+' : '-'; + long xx = abs(x * 100); + conv[1] = (xx / 10000) % 10 + '0'; + conv[2] = (xx / 1000) % 10 + '0'; + conv[3] = (xx / 100) % 10 + '0'; + conv[4] = '.'; + conv[5] = (xx / 10) % 10 + '0'; + conv[6] = xx % 10 + '0'; + conv[7] = 0; return conv; } From 8c136a5ab5200e1daa3c0943f43cf37f5c5f8dbb Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 30 Mar 2015 16:50:05 -0700 Subject: [PATCH 2/4] Conditionals and comments for PS = 0 --- Marlin/Marlin_main.cpp | 73 ++++++++++++++++++++++-------------------- Marlin/ultralcd.cpp | 4 ++- 2 files changed, 41 insertions(+), 36 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 854bf5953..28c761395 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -272,7 +272,7 @@ int fanSpeed = 0; #endif // FWRETRACT -#ifdef ULTIPANEL +#if defined(ULTIPANEL) && HAS_POWER_SWITCH bool powersupply = #ifdef PS_DEFAULT_OFF false @@ -517,7 +517,7 @@ void setup_powerhold() OUT_WRITE(SUICIDE_PIN, HIGH); #endif #if HAS_POWER_SWITCH - #if defined(PS_DEFAULT_OFF) + #ifdef PS_DEFAULT_OFF OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); #else OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); @@ -3313,33 +3313,38 @@ inline void gcode_M140() { #endif } - /** - * M81: Turn off Power Supply - */ - inline void gcode_M81() { - disable_heater(); +#endif // HAS_POWER_SWITCH + +/** + * M81: Turn off Power, including Power Supply, if there is one. + * + * This code should ALWAYS be available for EMERGENCY SHUTDOWN! + */ +inline void gcode_M81() { + disable_heater(); + st_synchronize(); + disable_e0(); + disable_e1(); + disable_e2(); + disable_e3(); + finishAndDisableSteppers(); + fanSpeed = 0; + delay(1000); // Wait 1 second before switching off + #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 st_synchronize(); - disable_e0(); - disable_e1(); - disable_e2(); - disable_e3(); - finishAndDisableSteppers(); - fanSpeed = 0; - delay(1000); // Wait 1 second before switching off - #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 - st_synchronize(); - suicide(); - #elif HAS_POWER_SWITCH - OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); - #endif - #ifdef ULTIPANEL + suicide(); + #elif HAS_POWER_SWITCH + OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); + #endif + #ifdef ULTIPANEL + #if HAS_POWER_SWITCH powersupply = false; - LCD_MESSAGEPGM(MACHINE_NAME " " MSG_OFF "."); - lcd_update(); #endif - } + LCD_MESSAGEPGM(MACHINE_NAME " " MSG_OFF "."); + lcd_update(); + #endif +} -#endif // PS_ON_PIN /** * M82: Set E codes absolute (default) @@ -4874,15 +4879,15 @@ void process_commands() { #endif //HEATER_2_PIN #endif //BARICUDA - #if defined(PS_ON_PIN) && PS_ON_PIN > -1 + #if HAS_POWER_SWITCH case 80: // M80 - Turn on Power Supply gcode_M80(); break; - #endif // PS_ON_PIN + #endif // HAS_POWER_SWITCH - case 81: // M81 - Turn off Power Supply + case 81: // M81 - Turn off Power, including Power Supply, if possible gcode_M81(); break; @@ -5859,19 +5864,17 @@ void kill() disable_e2(); disable_e3(); -#if defined(PS_ON_PIN) && PS_ON_PIN > -1 - pinMode(PS_ON_PIN,INPUT); -#endif + #if HAS_POWER_SWITCH + pinMode(PS_ON_PIN, INPUT); + #endif + SERIAL_ERROR_START; SERIAL_ERRORLNPGM(MSG_ERR_KILLED); LCD_ALERTMESSAGEPGM(MSG_KILLED); // FMC small patch to update the LCD before ending sei(); // enable interrupts - for ( int i=5; i--; lcd_update()) - { - delay(200); - } + for (int i = 5; i--; lcd_update()) delay(200); // Wait a short time cli(); // disable interrupts suicide(); while(1) { /* Intentionally left empty */ } // Wait for reset diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 96bba79b0..94f530f89 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -44,7 +44,9 @@ static void lcd_status_screen(); #ifdef ULTIPANEL - extern bool powersupply; + #if HAS_POWER_SWITCH + extern bool powersupply; + #endif static float manual_feedrate[] = MANUAL_FEEDRATE; static void lcd_main_menu(); static void lcd_tune_menu(); From 68642808032b7eaed642fccf4b797f5ed0e8dcf5 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 30 Mar 2015 16:52:27 -0700 Subject: [PATCH 3/4] Use elif and parentheses in conditionals --- Marlin/Conditionals.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index 5df6424b8..36f1ffb54 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -265,15 +265,14 @@ #ifndef POWER_SUPPLY #define POWER_SUPPLY 1 #endif - #if (POWER_SUPPLY == 1) // 1 = ATX + #if (POWER_SUPPLY == 1) // 1 = ATX #define PS_ON_AWAKE LOW #define PS_ON_ASLEEP HIGH - #endif - #if (POWER_SUPPLY == 2) // 2 = X-Box 360 203W + #elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W #define PS_ON_AWAKE HIGH #define PS_ON_ASLEEP LOW #endif - HAS_POWER_SWITCH = POWER_SUPPLY > 0 && defined(PS_ON_PIN) && PS_ON_PIN >= 0 + HAS_POWER_SWITCH = (POWER_SUPPLY > 0 && defined(PS_ON_PIN) && PS_ON_PIN >= 0) /** * Temp Sensor defines From 92b54aa27ebc9bb3e55a06b53a839bb14fe1c8cb Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 30 Mar 2015 19:44:53 -0700 Subject: [PATCH 4/4] #define HAS_POWER_SWITCH --- Marlin/Conditionals.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index 36f1ffb54..62ea7ba54 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -272,7 +272,7 @@ #define PS_ON_AWAKE HIGH #define PS_ON_ASLEEP LOW #endif - HAS_POWER_SWITCH = (POWER_SUPPLY > 0 && defined(PS_ON_PIN) && PS_ON_PIN >= 0) + #define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && defined(PS_ON_PIN) && PS_ON_PIN >= 0) /** * Temp Sensor defines