Merge pull request #1853 from thinkyhead/dev_version

Set version to "1.0.3 dev"
master
Scott Lahteine 10 years ago
commit bb917ecda8

@ -40,7 +40,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -40,7 +40,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -37,8 +37,8 @@
// save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
// we don't have a big font for Cyrillic, Kana
#if defined( MAPPER_C2C3 ) || defined( MAPPER_NON )
// #define USE_BIG_EDIT_FONT
#if defined(MAPPER_C2C3) || defined(MAPPER_NON)
//#define USE_BIG_EDIT_FONT
#endif
// If you have spare 2300Byte of progmem and want to use a
@ -126,17 +126,17 @@
// LCD selection
#ifdef U8GLIB_ST7920
//U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
U8GLIB_ST7920_128X64_RRD u8g(0);
//U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
U8GLIB_ST7920_128X64_RRD u8g(0);
#elif defined(MAKRPANEL)
// The MaKrPanel display, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
// The MaKrPanel display, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#elif defined(VIKI2) || defined(miniVIKI)
// Mini Viki and Viki 2.0 LCD, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
// Mini Viki and Viki 2.0 LCD, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else
// for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
// for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif
#include "utf_mapper.h"
@ -188,8 +188,8 @@ char lcd_printPGM(const char* str) {
static bool show_splashscreen = true;
static void lcd_implementation_init()
{
static void lcd_implementation_init() {
#ifdef LCD_PIN_BL // Enable LCD backlight
pinMode(LCD_PIN_BL, OUTPUT);
digitalWrite(LCD_PIN_BL, HIGH);
@ -198,16 +198,16 @@ static void lcd_implementation_init()
u8g.setContrast(lcd_contrast);
// FIXME: remove this workaround
// Uncomment this if you have the first generation (V1.10) of STBs board
// pinMode(17, OUTPUT); // Enable LCD backlight
// digitalWrite(17, HIGH);
#ifdef LCD_SCREEN_ROT_90
u8g.setRot90(); // Rotate screen by 90°
#elif defined(LCD_SCREEN_ROT_180)
u8g.setRot180(); // Rotate screen by 180°
#elif defined(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
// pinMode(17, OUTPUT); // Enable LCD backlight
// digitalWrite(17, HIGH);
#ifdef LCD_SCREEN_ROT_90
u8g.setRot90(); // Rotate screen by 90°
#elif defined(LCD_SCREEN_ROT_180)
u8g.setRot180(); // Rotate screen by 180°
#elif defined(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
// Show splashscreen
int offx = (u8g.getWidth() - START_BMPWIDTH) / 2;
@ -220,7 +220,7 @@ static void lcd_implementation_init()
int txt1X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE1) - 1)*DOG_CHAR_WIDTH) / 2;
u8g.firstPage();
do {
do {
if (show_splashscreen) {
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
lcd_setFont(FONT_MENU);
@ -232,7 +232,7 @@ static void lcd_implementation_init()
u8g.drawStr(txt2X, u8g.getHeight() - DOG_CHAR_HEIGHT*1/2, STRING_SPLASH_LINE2);
#endif
}
} while (u8g.nextPage());
} while (u8g.nextPage());
show_splashscreen = false;
}
@ -295,20 +295,19 @@ static void lcd_implementation_status_screen() {
lcd_printPGM(PSTR("--:--"));
}
#endif
// Extruders
for (int i=0; i<EXTRUDERS; i++) _draw_heater_status(6 + i * 25, i);
// Heatbed
if (EXTRUDERS < 4) _draw_heater_status(81, -1);
// Fan
lcd_setFont(FONT_STATUSMENU);
u8g.setPrintPos(104,27);
#if HAS_FAN
int per = ((fanSpeed + 1) * 100) / 256;
if (per) {
lcd_print(itostr3(per));
lcd_print('%');
}
@ -360,9 +359,9 @@ static void lcd_implementation_status_screen() {
// Status line
lcd_setFont(FONT_STATUSMENU);
#ifdef USE_SMALL_INFOFONT
u8g.setPrintPos(0,62);
u8g.setPrintPos(0,62);
#else
u8g.setPrintPos(0,63);
u8g.setPrintPos(0,63);
#endif
#ifndef FILAMENT_LCD_DISPLAY
lcd_print(lcd_status_message);

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(bq Hephestos)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(K8200, CONSULitAS)" // Who made the changes.

@ -56,7 +56,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(bq Witbox)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "1.0.2"
#define STRING_VERSION "1.0.3 dev"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

@ -422,7 +422,7 @@ static void lcd_main_menu() {
END_MENU();
}
#if defined( SDSUPPORT ) && defined( MENU_ADDAUTOSTART )
#if defined(SDSUPPORT) && defined(MENU_ADDAUTOSTART)
static void lcd_autostart_sd() {
card.autostart_index = 0;
card.setroot();
@ -431,7 +431,7 @@ static void lcd_main_menu() {
#endif
void lcd_set_home_offsets() {
for(int8_t i=0; i < NUM_AXIS; i++) {
for (int8_t i=0; i < NUM_AXIS; i++) {
if (i != E_AXIS) {
home_offset[i] -= current_position[i];
current_position[i] = 0.0;
@ -965,48 +965,49 @@ static void lcd_control_volumetric_menu() {
#ifdef DOGLCD
static void lcd_set_contrast() {
if (encoderPosition != 0) {
lcd_contrast -= encoderPosition;
if (lcd_contrast < 0) lcd_contrast = 0;
else if (lcd_contrast > 63) lcd_contrast = 63;
encoderPosition = 0;
lcdDrawUpdate = 1;
u8g.setContrast(lcd_contrast);
static void lcd_set_contrast() {
if (encoderPosition != 0) {
lcd_contrast -= encoderPosition;
lcd_contrast &= 0x3F;
encoderPosition = 0;
lcdDrawUpdate = 1;
u8g.setContrast(lcd_contrast);
}
if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast));
if (LCD_CLICKED) lcd_goto_menu(lcd_control_menu);
}
if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast));
if (LCD_CLICKED) lcd_goto_menu(lcd_control_menu);
}
#endif //DOGLCD
#endif // DOGLCD
#ifdef FWRETRACT
static void lcd_control_retract_menu() {
START_MENU();
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100);
#if EXTRUDERS > 1
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &retract_length_swap, 0, 100);
#endif
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100);
#if EXTRUDERS > 1
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &retract_recover_length_swap, 0, 100);
#endif
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
END_MENU();
}
static void lcd_control_retract_menu() {
START_MENU();
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100);
#if EXTRUDERS > 1
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &retract_length_swap, 0, 100);
#endif
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100);
#if EXTRUDERS > 1
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &retract_recover_length_swap, 0, 100);
#endif
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
END_MENU();
}
#endif //FWRETRACT
#endif // FWRETRACT
#if SDCARDDETECT == -1
static void lcd_sd_refresh() {
card.initsd();
currentMenuViewOffset = 0;
}
#endif
static void lcd_sd_updir() {
@ -1029,13 +1030,14 @@ void lcd_sdcard_menu() {
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
}
for(uint16_t i = 0; i < fileCnt; i++) {
for (uint16_t i = 0; i < fileCnt; i++) {
if (_menuItemNr == _lineNr) {
#ifndef SDCARD_RATHERRECENTFIRST
card.getfilename(i);
#else
card.getfilename(fileCnt-1-i);
#endif
card.getfilename(
#ifdef SDCARD_RATHERRECENTFIRST
fileCnt-1 -
#endif
i
);
if (card.filenameIsDir)
MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
else
@ -1458,7 +1460,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#ifdef DOGLCD
void lcd_setcontrast(uint8_t value) {
lcd_contrast = value & 63;
lcd_contrast = value & 0x3F;
u8g.setContrast(lcd_contrast);
}
#endif

@ -443,7 +443,7 @@ Possible status screens:
20x4 |01234567890123456789|
|T000/000D B000/000D |
|X+000.0 Y+000.0 Z+000.0|
|X000 Y000 Z000.00|
|F100% SD100% T--:--|
|Status line.........|
@ -453,141 +453,154 @@ Possible status screens:
|F100% SD100% T--:--|
|Status line.........|
*/
static void lcd_implementation_status_screen()
{
int tHotend=int(degHotend(0) + 0.5);
int tTarget=int(degTargetHotend(0) + 0.5);
static void lcd_implementation_status_screen() {
int tHotend = int(degHotend(0) + 0.5);
int tTarget = int(degTargetHotend(0) + 0.5);
#if LCD_WIDTH < 20
#if LCD_WIDTH < 20
lcd.setCursor(0, 0);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
//If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(8, 0);
# if EXTRUDERS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
# else//Heated bed
tHotend=int(degBed() + 0.5);
tTarget=int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
# endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
#if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
// If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(8, 0);
#if EXTRUDERS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
#else // Heated bed
tHotend = int(degBed() + 0.5);
tTarget = int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
#endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
#endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
#else // LCD_WIDTH > 19
#else//LCD_WIDTH > 19
lcd.setCursor(0, 0);
lcd.print(LCD_STR_THERMOMETER[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10)
lcd.print(' ');
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
//If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(10, 0);
# if EXTRUDERS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
# else//Heated bed
tHotend=int(degBed() + 0.5);
tTarget=int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
# endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10)
lcd.print(' ');
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
#endif//LCD_WIDTH > 19
#if LCD_HEIGHT > 2
//Lines 2 for 4 line LCD
# if LCD_WIDTH < 20
# ifdef SDSUPPORT
lcd.setCursor(0, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
lcd.print(itostr3(card.percentDone()));
else
lcd_printPGM(PSTR("---"));
lcd.print('%');
# endif//SDSUPPORT
# else//LCD_WIDTH > 19
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
tHotend=int(degBed() + 0.5);
tTarget=int(degTargetBed() + 0.5);
lcd.setCursor(0, 1);
lcd.print(LCD_STR_BEDTEMP[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10)
lcd.print(' ');
# else
lcd.setCursor(0,1);
lcd.print('X');
lcd.print(ftostr3(current_position[X_AXIS]));
lcd_printPGM(PSTR(" Y"));
lcd.print(ftostr3(current_position[Y_AXIS]));
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
# endif//LCD_WIDTH > 19
if (tTarget < 10) lcd.print(' ');
#if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
// If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(10, 0);
#if EXTRUDERS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
#else // Heated bed
tHotend = int(degBed() + 0.5);
tTarget = int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
#endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10) lcd.print(' ');
#endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
#endif // LCD_WIDTH > 19
#if LCD_HEIGHT > 2
// Lines 2 for 4 line LCD
#if LCD_WIDTH < 20
#ifdef SDSUPPORT
lcd.setCursor(0, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
lcd.print(itostr3(card.percentDone()));
else
lcd_printPGM(PSTR("---"));
lcd.print('%');
#endif // SDSUPPORT
#else // LCD_WIDTH > 19
#if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
// If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
tHotend = int(degBed() + 0.5);
tTarget = int(degTargetBed() + 0.5);
lcd.setCursor(0, 1);
lcd.print(LCD_STR_BEDTEMP[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10) lcd.print(' ');
#else
lcd.setCursor(0,1);
lcd.print('X');
lcd.print(ftostr3(current_position[X_AXIS]));
lcd_printPGM(PSTR(" Y"));
lcd.print(ftostr3(current_position[Y_AXIS]));
#endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
#endif // LCD_WIDTH > 19
lcd.setCursor(LCD_WIDTH - 8, 1);
lcd.print('Z');
lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001));
#endif//LCD_HEIGHT > 2
#if LCD_HEIGHT > 3
#endif // LCD_HEIGHT > 2
#if LCD_HEIGHT > 3
lcd.setCursor(0, 2);
lcd.print(LCD_STR_FEEDRATE[0]);
lcd.print(itostr3(feedmultiply));
lcd.print('%');
# if LCD_WIDTH > 19
# ifdef SDSUPPORT
lcd.setCursor(7, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
#if LCD_WIDTH > 19 && defined(SDSUPPORT)
lcd.setCursor(7, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
lcd.print(itostr3(card.percentDone()));
else
else
lcd_printPGM(PSTR("---"));
lcd.print('%');
# endif//SDSUPPORT
# endif//LCD_WIDTH > 19
lcd.print('%');
#endif // LCD_WIDTH > 19 && SDSUPPORT
lcd.setCursor(LCD_WIDTH - 6, 2);
lcd.print(LCD_STR_CLOCK[0]);
if(starttime != 0)
{
uint16_t time = millis()/60000 - starttime/60000;
lcd.print(itostr2(time/60));
lcd.print(':');
lcd.print(itostr2(time%60));
}else{
lcd_printPGM(PSTR("--:--"));
if (starttime != 0) {
uint16_t time = millis()/60000 - starttime/60000;
lcd.print(itostr2(time/60));
lcd.print(':');
lcd.print(itostr2(time%60));
}
#endif
else {
lcd_printPGM(PSTR("--:--"));
}
#endif // LCD_HEIGHT > 3
/**
* Display Progress Bar, Filament display, and/or Status Message on the last line
*/
// Status message line at the bottom
lcd.setCursor(0, LCD_HEIGHT - 1);
#ifdef LCD_PROGRESS_BAR
if (card.isFileOpen()) {
uint16_t mil = millis(), diff = mil - progressBarTick;
if (diff >= PROGRESS_BAR_MSG_TIME || !lcd_status_message[0]) {
if (millis() >= progressBarTick + PROGRESS_BAR_MSG_TIME || !lcd_status_message[0]) {
// draw the progress bar
int tix = (int)(card.percentDone() * LCD_WIDTH * 3) / 100,
cel = tix / 3, rem = tix % 3, i = LCD_WIDTH;
@ -605,11 +618,11 @@ static void lcd_implementation_status_screen()
}
} //card.isFileOpen
#endif //LCD_PROGRESS_BAR
#elif defined(FILAMENT_LCD_DISPLAY)
//Display both Status message line and Filament display on the last line
#ifdef FILAMENT_LCD_DISPLAY
if (message_millis + 5000 <= millis()) { //display any status for the first 5 sec after screen is initiated
// Show Filament Diameter and Volumetric Multiplier %
// After allowing lcd_status_message to show for 5 seconds
if (millis() >= message_millis + 5000) {
lcd_printPGM(PSTR("Dia "));
lcd.print(ftostr12ns(filament_width_meas));
lcd_printPGM(PSTR(" V"));
@ -617,7 +630,8 @@ static void lcd_implementation_status_screen()
lcd.print('%');
return;
}
#endif //FILAMENT_LCD_DISPLAY
#endif // FILAMENT_LCD_DISPLAY
lcd_print(lcd_status_message);
}

Loading…
Cancel
Save