Document DEBUG_LEVELING_FEATURE

9 years ago · bb9da6ebdd
parent 0b2c608d2f
commit bb9da6ebdd
22 changed files with 88 additions and 0 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -669,6 +669,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@ -669,6 +669,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -651,6 +651,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@ -649,6 +649,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -661,6 +661,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@ -663,6 +663,10 @@
 // @section bedlevel

 #define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -686,6 +686,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@ -669,6 +669,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@ -669,6 +669,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -669,6 +669,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@ -666,6 +666,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -677,6 +677,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@ -690,6 +690,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -661,6 +661,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -669,6 +669,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@ -758,6 +758,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -752,6 +752,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -755,6 +755,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@ -749,6 +749,10 @@
 // @section bedlevel

 #define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -750,6 +750,10 @@
 // @section bedlevel

 #define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -672,6 +672,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -659,6 +659,10 @@
 // @section bedlevel

 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE

 #if ENABLED(AUTO_BED_LEVELING_FEATURE)