Merge pull request #8417 from thinkyhead/bf1_M114_DETAIL

[1.1] Add M114_DETAIL to Configuration_adv.h
7 years ago · be67acbd48
parent 216f9b45cc 8d06cf7b84
commit be67acbd48
30 changed files with 123 additions and 30 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 4
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 3
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 1
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 3
 #define Y_HOME_BUMP_MM 3
 #define Z_HOME_BUMP_MM 3
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -334,7 +337,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@ -135,6 +135,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -358,7 +361,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 10
 #define Y_HOME_BUMP_MM 10
 #define Z_HOME_BUMP_MM 3
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -127,6 +127,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -350,7 +353,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 2
 #define Y_HOME_BUMP_MM 2
 #define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -122,6 +122,9 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +348,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 1
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@ -122,6 +122,12 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

+// Show extra position information in M114
+//#define M114_DETAIL
+
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@ -345,7 +351,7 @@

 // @section homing

-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2