From c35fb88094c9fa345b25c9dac209744e1062a412 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 30 Jul 2015 22:28:11 -0700 Subject: [PATCH] Overridable Options - Part 8 (PR#2560) Apply `ENABLED` / `DISABLED` macros to stepper-related files. --- Marlin/stepper.cpp | 94 ++++++++++---------- Marlin/stepper.h | 8 +- Marlin/stepper_indirection.cpp | 152 ++++++++++++++++----------------- Marlin/stepper_indirection.h | 44 +++++----- 4 files changed, 149 insertions(+), 149 deletions(-) diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index f74f2f973..2dd2f477c 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -49,7 +49,7 @@ block_t *current_block; // A pointer to the block currently being traced static unsigned char out_bits = 0; // The next stepping-bits to be output static unsigned int cleaning_buffer_counter; -#ifdef Z_DUAL_ENDSTOPS +#if ENABLED(Z_DUAL_ENDSTOPS) static bool performing_homing = false, locked_z_motor = false, locked_z2_motor = false; @@ -59,7 +59,7 @@ static unsigned int cleaning_buffer_counter; static long counter_x, counter_y, counter_z, counter_e; volatile static unsigned long step_events_completed; // The number of step events executed in the current block -#ifdef ADVANCE +#if ENABLED(ADVANCE) static long advance_rate, advance, final_advance = 0; static long old_advance = 0; static long e_steps[4]; @@ -76,18 +76,18 @@ volatile long endstops_trigsteps[3] = { 0 }; volatile long endstops_stepsTotal, endstops_stepsDone; static volatile char endstop_hit_bits = 0; // use X_MIN, Y_MIN, Z_MIN and Z_PROBE as BIT value -#ifndef Z_DUAL_ENDSTOPS +#if DISABLED(Z_DUAL_ENDSTOPS) static byte #else static uint16_t #endif old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX -#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED +#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) bool abort_on_endstop_hit = false; #endif -#ifdef MOTOR_CURRENT_PWM_XY_PIN +#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) int motor_current_setting[3] = DEFAULT_PWM_MOTOR_CURRENT; #endif @@ -101,7 +101,7 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; //================================ functions ================================ //=========================================================================== -#ifdef DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) #define X_APPLY_DIR(v,ALWAYS) \ if (extruder_duplication_enabled || ALWAYS) { \ X_DIR_WRITE(v); \ @@ -123,7 +123,7 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; #define X_APPLY_STEP(v,Q) X_STEP_WRITE(v) #endif -#ifdef Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) #define Y_APPLY_DIR(v,Q) { Y_DIR_WRITE(v); Y2_DIR_WRITE((v) != INVERT_Y2_VS_Y_DIR); } #define Y_APPLY_STEP(v,Q) { Y_STEP_WRITE(v); Y2_STEP_WRITE(v); } #else @@ -131,9 +131,9 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; #define Y_APPLY_STEP(v,Q) Y_STEP_WRITE(v) #endif -#ifdef Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) #define Z_APPLY_DIR(v,Q) { Z_DIR_WRITE(v); Z2_DIR_WRITE(v); } - #ifdef Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) #define Z_APPLY_STEP(v,Q) \ if (performing_homing) { \ if (Z_HOME_DIR > 0) {\ @@ -263,17 +263,17 @@ void checkHitEndstops() { SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]); LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z"); } - #ifdef Z_PROBE_ENDSTOP - if (endstop_hit_bits & BIT(Z_PROBE)) { - SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]); - LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP"); - } + #if ENABLED(Z_PROBE_ENDSTOP) + if (endstop_hit_bits & BIT(Z_PROBE)) { + SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]); + LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP"); + } #endif SERIAL_EOL; endstops_hit_on_purpose(); - #if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT) + #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT) if (abort_on_endstop_hit) { card.sdprinting = false; card.closefile(); @@ -556,7 +556,7 @@ void set_stepper_direction() { count_direction[Z_AXIS] = 1; } - #ifndef ADVANCE + #if DISABLED(ADVANCE) if (TEST(out_bits, E_AXIS)) { REV_E_DIR(); count_direction[E_AXIS] = -1; @@ -577,7 +577,7 @@ FORCE_INLINE void trapezoid_generator_reset() { set_stepper_direction(); } - #ifdef ADVANCE + #if ENABLED(ADVANCE) advance = current_block->initial_advance; final_advance = current_block->final_advance; // Do E steps + advance steps @@ -630,7 +630,7 @@ ISR(TIMER1_COMPA_vect) { counter_y = counter_z = counter_e = counter_x; step_events_completed = 0; - #ifdef Z_LATE_ENABLE + #if ENABLED(Z_LATE_ENABLE) if (current_block->steps[Z_AXIS] > 0) { enable_z(); OCR1A = 2000; //1ms wait @@ -638,7 +638,7 @@ ISR(TIMER1_COMPA_vect) { } #endif - // #ifdef ADVANCE + // #if ENABLED(ADVANCE) // e_steps[current_block->active_extruder] = 0; // #endif } @@ -658,7 +658,7 @@ ISR(TIMER1_COMPA_vect) { MSerial.checkRx(); // Check for serial chars. #endif - #ifdef ADVANCE + #if ENABLED(ADVANCE) counter_e += current_block->steps[E_AXIS]; if (counter_e > 0) { counter_e -= current_block->step_event_count; @@ -677,7 +677,7 @@ ISR(TIMER1_COMPA_vect) { STEP_ADD(x,X); STEP_ADD(y,Y); STEP_ADD(z,Z); - #ifndef ADVANCE + #if DISABLED(ADVANCE) STEP_ADD(e,E); #endif @@ -691,7 +691,7 @@ ISR(TIMER1_COMPA_vect) { STEP_IF_COUNTER(x, X); STEP_IF_COUNTER(y, Y); STEP_IF_COUNTER(z, Z); - #ifndef ADVANCE + #if DISABLED(ADVANCE) STEP_IF_COUNTER(e, E); #endif @@ -714,7 +714,7 @@ ISR(TIMER1_COMPA_vect) { timer = calc_timer(acc_step_rate); OCR1A = timer; acceleration_time += timer; - #ifdef ADVANCE + #if ENABLED(ADVANCE) for(int8_t i=0; i < step_loops; i++) { advance += advance_rate; } @@ -743,7 +743,7 @@ ISR(TIMER1_COMPA_vect) { timer = calc_timer(step_rate); OCR1A = timer; deceleration_time += timer; - #ifdef ADVANCE + #if ENABLED(ADVANCE) for(int8_t i=0; i < step_loops; i++) { advance -= advance_rate; } @@ -767,7 +767,7 @@ ISR(TIMER1_COMPA_vect) { } } -#ifdef ADVANCE +#if ENABLED(ADVANCE) unsigned char old_OCR0A; // Timer interrupt for E. e_steps is set in the main routine; // Timer 0 is shared with millies @@ -845,11 +845,11 @@ void st_init() { microstep_init(); //Initialize Microstepping Pins // initialise TMC Steppers - #ifdef HAVE_TMCDRIVER + #if ENABLED(HAVE_TMCDRIVER) tmc_init(); #endif // initialise L6470 Steppers - #ifdef HAVE_L6470DRIVER + #if ENABLED(HAVE_L6470DRIVER) L6470_init(); #endif @@ -862,13 +862,13 @@ void st_init() { #endif #if HAS_Y_DIR Y_DIR_INIT; - #if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_DIR + #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_DIR Y2_DIR_INIT; #endif #endif #if HAS_Z_DIR Z_DIR_INIT; - #if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_DIR + #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_DIR Z2_DIR_INIT; #endif #endif @@ -899,7 +899,7 @@ void st_init() { Y_ENABLE_INIT; if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH); - #if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_ENABLE + #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_ENABLE Y2_ENABLE_INIT; if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH); #endif @@ -908,7 +908,7 @@ void st_init() { Z_ENABLE_INIT; if (!Z_ENABLE_ON) Z_ENABLE_WRITE(HIGH); - #if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_ENABLE + #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_ENABLE Z2_ENABLE_INIT; if (!Z_ENABLE_ON) Z2_ENABLE_WRITE(HIGH); #endif @@ -934,56 +934,56 @@ void st_init() { #if HAS_X_MIN SET_INPUT(X_MIN_PIN); - #ifdef ENDSTOPPULLUP_XMIN + #if ENABLED(ENDSTOPPULLUP_XMIN) WRITE(X_MIN_PIN,HIGH); #endif #endif #if HAS_Y_MIN SET_INPUT(Y_MIN_PIN); - #ifdef ENDSTOPPULLUP_YMIN + #if ENABLED(ENDSTOPPULLUP_YMIN) WRITE(Y_MIN_PIN,HIGH); #endif #endif #if HAS_Z_MIN SET_INPUT(Z_MIN_PIN); - #ifdef ENDSTOPPULLUP_ZMIN + #if ENABLED(ENDSTOPPULLUP_ZMIN) WRITE(Z_MIN_PIN,HIGH); #endif #endif #if HAS_X_MAX SET_INPUT(X_MAX_PIN); - #ifdef ENDSTOPPULLUP_XMAX + #if ENABLED(ENDSTOPPULLUP_XMAX) WRITE(X_MAX_PIN,HIGH); #endif #endif #if HAS_Y_MAX SET_INPUT(Y_MAX_PIN); - #ifdef ENDSTOPPULLUP_YMAX + #if ENABLED(ENDSTOPPULLUP_YMAX) WRITE(Y_MAX_PIN,HIGH); #endif #endif #if HAS_Z_MAX SET_INPUT(Z_MAX_PIN); - #ifdef ENDSTOPPULLUP_ZMAX + #if ENABLED(ENDSTOPPULLUP_ZMAX) WRITE(Z_MAX_PIN,HIGH); #endif #endif #if HAS_Z2_MAX SET_INPUT(Z2_MAX_PIN); - #ifdef ENDSTOPPULLUP_ZMAX + #if ENABLED(ENDSTOPPULLUP_ZMAX) WRITE(Z2_MAX_PIN,HIGH); #endif #endif - #if (defined(Z_PROBE_PIN) && Z_PROBE_PIN >= 0) && defined(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used. + #if HAS_Z_PROBE && ENABLED(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used. SET_INPUT(Z_PROBE_PIN); - #ifdef ENDSTOPPULLUP_ZPROBE + #if ENABLED(ENDSTOPPULLUP_ZPROBE) WRITE(Z_PROBE_PIN,HIGH); #endif #endif @@ -1007,14 +1007,14 @@ void st_init() { AXIS_INIT(x, X2, X); #endif #if HAS_Y_STEP - #if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_STEP + #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_STEP Y2_STEP_INIT; Y2_STEP_WRITE(INVERT_Y_STEP_PIN); #endif AXIS_INIT(y, Y, Y); #endif #if HAS_Z_STEP - #if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_STEP + #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_STEP Z2_STEP_INIT; Z2_STEP_WRITE(INVERT_Z_STEP_PIN); #endif @@ -1054,7 +1054,7 @@ void st_init() { TCNT1 = 0; ENABLE_STEPPER_DRIVER_INTERRUPT(); - #ifdef ADVANCE + #if ENABLED(ADVANCE) #if defined(TCCR0A) && defined(WGM01) TCCR0A &= ~BIT(WGM01); TCCR0A &= ~BIT(WGM00); @@ -1113,7 +1113,7 @@ void quickStop() { ENABLE_STEPPER_DRIVER_INTERRUPT(); } -#ifdef BABYSTEPPING +#if ENABLED(BABYSTEPPING) // MUST ONLY BE CALLED BY AN ISR, // No other ISR should ever interrupt this! @@ -1146,7 +1146,7 @@ void quickStop() { case Z_AXIS: { - #ifndef DELTA + #if DISABLED(DELTA) BABYSTEP_AXIS(z, Z, BABYSTEP_INVERT_Z); @@ -1272,7 +1272,7 @@ void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2) { case 1: digitalWrite(Y_MS2_PIN, ms2); break; case 2: digitalWrite(Z_MS2_PIN, ms2); break; case 3: digitalWrite(E0_MS2_PIN, ms2); break; - #if defined(E1_MS2_PIN) && E1_MS2_PIN >= 0 + #if PIN_EXISTS(E1_MS2) case 4: digitalWrite(E1_MS2_PIN, ms2); break; #endif } @@ -1309,7 +1309,7 @@ void microstep_readings() { #endif } -#ifdef Z_DUAL_ENDSTOPS +#if ENABLED(Z_DUAL_ENDSTOPS) void In_Homing_Process(bool state) { performing_homing = state; } void Lock_z_motor(bool state) { locked_z_motor = state; } void Lock_z2_motor(bool state) { locked_z2_motor = state; } diff --git a/Marlin/stepper.h b/Marlin/stepper.h index 4df5bedc1..54bded427 100644 --- a/Marlin/stepper.h +++ b/Marlin/stepper.h @@ -33,7 +33,7 @@ #define NORM_E_DIR() { if(current_block->active_extruder == 2) { E2_DIR_WRITE(!INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }}} #define REV_E_DIR() { if(current_block->active_extruder == 2) { E2_DIR_WRITE(INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }}} #elif EXTRUDERS > 1 - #ifndef DUAL_X_CARRIAGE + #if DISABLED(DUAL_X_CARRIAGE) #define E_STEP_WRITE(v) { if(current_block->active_extruder == 1) { E1_STEP_WRITE(v); } else { E0_STEP_WRITE(v); }} #define NORM_E_DIR() { if(current_block->active_extruder == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }} #define REV_E_DIR() { if(current_block->active_extruder == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }} @@ -49,7 +49,7 @@ #define REV_E_DIR() E0_DIR_WRITE(INVERT_E0_DIR) #endif -#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED +#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) extern bool abort_on_endstop_hit; #endif @@ -95,13 +95,13 @@ void digipot_current(uint8_t driver, int current); void microstep_init(); void microstep_readings(); -#ifdef Z_DUAL_ENDSTOPS +#if ENABLED(Z_DUAL_ENDSTOPS) void In_Homing_Process(bool state); void Lock_z_motor(bool state); void Lock_z2_motor(bool state); #endif -#ifdef BABYSTEPPING +#if ENABLED(BABYSTEPPING) void babystep(const uint8_t axis,const bool direction); // perform a short step with a single stepper motor, outside of any convention #endif diff --git a/Marlin/stepper_indirection.cpp b/Marlin/stepper_indirection.cpp index 03c4a3c48..bedc37e36 100644 --- a/Marlin/stepper_indirection.cpp +++ b/Marlin/stepper_indirection.cpp @@ -22,203 +22,203 @@ #include "stepper_indirection.h" #include "Configuration.h" -#ifdef HAVE_TMCDRIVER -#include -#include +#if ENABLED(HAVE_TMCDRIVER) + #include + #include #endif // Stepper objects of TMC steppers used -#ifdef X_IS_TMC +#if ENABLED(X_IS_TMC) TMC26XStepper stepperX(200,X_ENABLE_PIN,X_STEP_PIN,X_DIR_PIN,X_MAX_CURRENT,X_SENSE_RESISTOR); #endif -#ifdef X2_IS_TMC +#if ENABLED(X2_IS_TMC) TMC26XStepper stepperX2(200,X2_ENABLE_PIN,X2_STEP_PIN,X2_DIR_PIN,X2_MAX_CURRENT,X2_SENSE_RESISTOR); #endif -#ifdef Y_IS_TMC +#if ENABLED(Y_IS_TMC) TMC26XStepper stepperY(200,Y_ENABLE_PIN,Y_STEP_PIN,Y_DIR_PIN,Y_MAX_CURRENT,Y_SENSE_RESISTOR); #endif -#ifdef Y2_IS_TMC +#if ENABLED(Y2_IS_TMC) TMC26XStepper stepperY2(200,Y2_ENABLE_PIN,Y2_STEP_PIN,Y2_DIR_PIN,Y2_MAX_CURRENT,Y2_SENSE_RESISTOR); #endif -#ifdef Z_IS_TMC +#if ENABLED(Z_IS_TMC) TMC26XStepper stepperZ(200,Z_ENABLE_PIN,Z_STEP_PIN,Z_DIR_PIN,Z_MAX_CURRENT,Z_SENSE_RESISTOR); #endif -#ifdef Z2_IS_TMC +#if ENABLED(Z2_IS_TMC) TMC26XStepper stepperZ2(200,Z2_ENABLE_PIN,Z2_STEP_PIN,Z2_DIR_PIN,Z2_MAX_CURRENT,Z2_SENSE_RESISTOR); #endif -#ifdef E0_IS_TMC +#if ENABLED(E0_IS_TMC) TMC26XStepper stepperE0(200,E0_ENABLE_PIN,E0_STEP_PIN,E0_DIR_PIN,E0_MAX_CURRENT,E0_SENSE_RESISTOR); #endif -#ifdef E1_IS_TMC +#if ENABLED(E1_IS_TMC) TMC26XStepper stepperE1(200,E1_ENABLE_PIN,E1_STEP_PIN,E1_DIR_PIN,E1_MAX_CURRENT,E1_SENSE_RESISTOR); #endif -#ifdef E2_IS_TMC +#if ENABLED(E2_IS_TMC) TMC26XStepper stepperE2(200,E2_ENABLE_PIN,E2_STEP_PIN,E2_DIR_PIN,E2_MAX_CURRENT,E2_SENSE_RESISTOR); #endif -#ifdef E3_IS_TMC +#if ENABLED(E3_IS_TMC) TMC26XStepper stepperE3(200,E3_ENABLE_PIN,E3_STEP_PIN,E3_DIR_PIN,E3_MAX_CURRENT,E3_SENSE_RESISTOR); #endif -#ifdef HAVE_TMCDRIVER +#if ENABLED(HAVE_TMCDRIVER) void tmc_init() { -#ifdef X_IS_TMC + #if ENABLED(X_IS_TMC) stepperX.setMicrosteps(X_MICROSTEPS); stepperX.start(); -#endif -#ifdef X2_IS_TMC + #endif + #if ENABLED(X2_IS_TMC) stepperX2.setMicrosteps(X2_MICROSTEPS); stepperX2.start(); -#endif -#ifdef Y_IS_TMC + #endif + #if ENABLED(Y_IS_TMC) stepperY.setMicrosteps(Y_MICROSTEPS); stepperY.start(); -#endif -#ifdef Y2_IS_TMC + #endif + #if ENABLED(Y2_IS_TMC) stepperY2.setMicrosteps(Y2_MICROSTEPS); stepperY2.start(); -#endif -#ifdef Z_IS_TMC + #endif + #if ENABLED(Z_IS_TMC) stepperZ.setMicrosteps(Z_MICROSTEPS); stepperZ.start(); -#endif -#ifdef Z2_IS_TMC + #endif + #if ENABLED(Z2_IS_TMC) stepperZ2.setMicrosteps(Z2_MICROSTEPS); stepperZ2.start(); -#endif -#ifdef E0_IS_TMC + #endif + #if ENABLED(E0_IS_TMC) stepperE0.setMicrosteps(E0_MICROSTEPS); stepperE0.start(); -#endif -#ifdef E1_IS_TMC + #endif + #if ENABLED(E1_IS_TMC) stepperE1.setMicrosteps(E1_MICROSTEPS); stepperE1.start(); -#endif -#ifdef E2_IS_TMC + #endif + #if ENABLED(E2_IS_TMC) stepperE2.setMicrosteps(E2_MICROSTEPS); stepperE2.start(); -#endif -#ifdef E3_IS_TMC + #endif + #if ENABLED(E3_IS_TMC) stepperE3.setMicrosteps(E3_MICROSTEPS); stepperE3.start(); -#endif + #endif } #endif // L6470 Driver objects and inits -#ifdef HAVE_L6470DRIVER +#if ENABLED(HAVE_L6470DRIVER) #include #include #endif // L6470 Stepper objects -#ifdef X_IS_L6470 + #if ENABLED(X_IS_L6470) L6470 stepperX(X_ENABLE_PIN); -#endif -#ifdef X2_IS_L6470 + #endif + #if ENABLED(X2_IS_L6470) L6470 stepperX2(X2_ENABLE_PIN); -#endif -#ifdef Y_IS_L6470 + #endif + #if ENABLED(Y_IS_L6470) L6470 stepperY(Y_ENABLE_PIN); -#endif -#ifdef Y2_IS_L6470 + #endif + #if ENABLED(Y2_IS_L6470) L6470 stepperY2(Y2_ENABLE_PIN); -#endif -#ifdef Z_IS_L6470 + #endif + #if ENABLED(Z_IS_L6470) L6470 stepperZ(Z_ENABLE_PIN); -#endif -#ifdef Z2_IS_L6470 + #endif + #if ENABLED(Z2_IS_L6470) L6470 stepperZ2(Z2_ENABLE_PIN); -#endif -#ifdef E0_IS_L6470 + #endif + #if ENABLED(E0_IS_L6470) L6470 stepperE0(E0_ENABLE_PIN); -#endif -#ifdef E1_IS_L6470 + #endif + #if ENABLED(E1_IS_L6470) L6470 stepperE1(E1_ENABLE_PIN); -#endif -#ifdef E2_IS_L6470 + #endif + #if ENABLED(E2_IS_L6470) L6470 stepperE2(E2_ENABLE_PIN); -#endif -#ifdef E3_IS_L6470 + #endif + #if ENABLED(E3_IS_L6470) L6470 stepperE3(E3_ENABLE_PIN); -#endif + #endif // init routine -#ifdef HAVE_L6470DRIVER +#if ENABLED(HAVE_L6470DRIVER) void L6470_init() { -#ifdef X_IS_L6470 + #if ENABLED(X_IS_L6470) stepperX.init(X_K_VAL); stepperX.softFree(); stepperX.setMicroSteps(X_MICROSTEPS); stepperX.setOverCurrent(X_OVERCURRENT); //set overcurrent protection stepperX.setStallCurrent(X_STALLCURRENT); -#endif -#ifdef X2_IS_L6470 + #endif + #if ENABLED(X2_IS_L6470) stepperX2.init(X2_K_VAL); stepperX2.softFree(); stepperX2.setMicroSteps(X2_MICROSTEPS); stepperX2.setOverCurrent(X2_OVERCURRENT); //set overcurrent protection stepperX2.setStallCurrent(X2_STALLCURRENT); -#endif -#ifdef Y_IS_L6470 + #endif + #if ENABLED(Y_IS_L6470) stepperY.init(Y_K_VAL); stepperY.softFree(); stepperY.setMicroSteps(Y_MICROSTEPS); stepperY.setOverCurrent(Y_OVERCURRENT); //set overcurrent protection stepperY.setStallCurrent(Y_STALLCURRENT); -#endif -#ifdef Y2_IS_L6470 + #endif + #if ENABLED(Y2_IS_L6470) stepperY2.init(Y2_K_VAL); stepperY2.softFree(); stepperY2.setMicroSteps(Y2_MICROSTEPS); stepperY2.setOverCurrent(Y2_OVERCURRENT); //set overcurrent protection stepperY2.setStallCurrent(Y2_STALLCURRENT); -#endif -#ifdef Z_IS_L6470 + #endif + #if ENABLED(Z_IS_L6470) stepperZ.init(Z_K_VAL); stepperZ.softFree(); stepperZ.setMicroSteps(Z_MICROSTEPS); stepperZ.setOverCurrent(Z_OVERCURRENT); //set overcurrent protection stepperZ.setStallCurrent(Z_STALLCURRENT); -#endif -#ifdef Z2_IS_L6470 + #endif + #if ENABLED(Z2_IS_L6470) stepperZ2.init(Z2_K_VAL); stepperZ2.softFree(); stepperZ2.setMicroSteps(Z2_MICROSTEPS); stepperZ2.setOverCurrent(Z2_OVERCURRENT); //set overcurrent protection stepperZ2.setStallCurrent(Z2_STALLCURRENT); -#endif -#ifdef E0_IS_L6470 + #endif + #if ENABLED(E0_IS_L6470) stepperE0.init(E0_K_VAL); stepperE0.softFree(); stepperE0.setMicroSteps(E0_MICROSTEPS); stepperE0.setOverCurrent(E0_OVERCURRENT); //set overcurrent protection stepperE0.setStallCurrent(E0_STALLCURRENT); -#endif -#ifdef E1_IS_L6470 + #endif + #if ENABLED(E1_IS_L6470) stepperE1.init(E1_K_VAL); stepperE1.softFree(); stepperE1.setMicroSteps(E1_MICROSTEPS); stepperE1.setOverCurrent(E1_OVERCURRENT); //set overcurrent protection stepperE1.setStallCurrent(E1_STALLCURRENT); -#endif -#ifdef E2_IS_L6470 + #endif + #if ENABLED(E2_IS_L6470) stepperE2.init(E2_K_VAL); stepperE2.softFree(); stepperE2.setMicroSteps(E2_MICROSTEPS); stepperE2.setOverCurrent(E2_OVERCURRENT); //set overcurrent protection stepperE2.setStallCurrent(E2_STALLCURRENT); -#endif -#ifdef E3_IS_L6470 + #endif + #if ENABLED(E3_IS_L6470) stepperE3.init(E3_K_VAL); stepperE3.softFree(); stepperE3.setMicroSteps(E3_MICROSTEPS); stepperE3.setOverCurrent(E3_OVERCURRENT); //set overcurrent protection stepperE3.setStallCurrent(E3_STALLCURRENT); -#endif + #endif } #endif diff --git a/Marlin/stepper_indirection.h b/Marlin/stepper_indirection.h index 04bb223e1..7ded34cd8 100644 --- a/Marlin/stepper_indirection.h +++ b/Marlin/stepper_indirection.h @@ -158,12 +158,12 @@ // Pin redefines for TMC drivers. // TMC26X drivers have step and dir on normal pins, but everything else via SPI ////////////////////////////////// -#ifdef HAVE_TMCDRIVER +#if ENABLED(HAVE_TMCDRIVER) #include #include void tmc_init(); -#ifdef X_IS_TMC +#if ENABLED(X_IS_TMC) extern TMC26XStepper stepperX; #undef X_ENABLE_INIT #define X_ENABLE_INIT ((void)0) @@ -175,7 +175,7 @@ #define X_ENABLE_READ stepperX.isEnabled() #endif -#ifdef X2_IS_TMC +#if ENABLED(X2_IS_TMC) extern TMC26XStepper stepperX2; #undef X2_ENABLE_INIT #define X2_ENABLE_INIT ((void)0) @@ -186,7 +186,7 @@ #undef X2_ENABLE_READ #define X2_ENABLE_READ stepperX2.isEnabled() #endif -#ifdef Y_IS_TMC +#if ENABLED(Y_IS_TMC) extern TMC26XStepper stepperY; #undef Y_ENABLE_INIT #define Y_ENABLE_INIT ((void)0) @@ -197,7 +197,7 @@ #undef Y_ENABLE_READ #define Y_ENABLE_READ stepperY.isEnabled() #endif -#ifdef Y2_IS_TMC +#if ENABLED(Y2_IS_TMC) extern TMC26XStepper stepperY2; #undef Y2_ENABLE_INIT #define Y2_ENABLE_INIT ((void)0) @@ -208,7 +208,7 @@ #undef Y2_ENABLE_READ #define Y2_ENABLE_READ stepperY2.isEnabled() #endif -#ifdef Z_IS_TMC +#if ENABLED(Z_IS_TMC) extern TMC26XStepper stepperZ; #undef Z_ENABLE_INIT #define Z_ENABLE_INIT ((void)0) @@ -219,7 +219,7 @@ #undef Z_ENABLE_READ #define Z_ENABLE_READ stepperZ.isEnabled() #endif -#ifdef Z2_IS_TMC +#if ENABLED(Z2_IS_TMC) extern TMC26XStepper stepperZ2; #undef Z2_ENABLE_INIT #define Z2_ENABLE_INIT ((void)0) @@ -230,7 +230,7 @@ #undef Z2_ENABLE_READ #define Z2_ENABLE_READ stepperZ2.isEnabled() #endif -#ifdef E0_IS_TMC +#if ENABLED(E0_IS_TMC) extern TMC26XStepper stepperE0; #undef E0_ENABLE_INIT #define E0_ENABLE_INIT ((void)0) @@ -241,7 +241,7 @@ #undef E0_ENABLE_READ #define E0_ENABLE_READ stepperE0.isEnabled() #endif -#ifdef E1_IS_TMC +#if ENABLED(E1_IS_TMC) extern TMC26XStepper stepperE1; #undef E1_ENABLE_INIT #define E1_ENABLE_INIT ((void)0) @@ -252,7 +252,7 @@ #undef E1_ENABLE_READ #define E1_ENABLE_READ stepperE1.isEnabled() #endif -#ifdef E2_IS_TMC +#if ENABLED(E2_IS_TMC) extern TMC26XStepper stepperE2; #undef E2_ENABLE_INIT #define E2_ENABLE_INIT ((void)0) @@ -263,7 +263,7 @@ #undef E2_ENABLE_READ #define E2_ENABLE_READ stepperE2.isEnabled() #endif -#ifdef E3_IS_TMC +#if ENABLED(E3_IS_TMC) extern TMC26XStepper stepperE3; #undef E3_ENABLE_INIT #define E3_ENABLE_INIT ((void)0) @@ -281,13 +281,13 @@ // Pin redefines for L6470 drivers. // L640 drivers have step on normal pins, but dir and everything else via SPI ////////////////////////////////// -#ifdef HAVE_L6470DRIVER +#if ENABLED(HAVE_L6470DRIVER) #include #include void L6470_init(); -#ifdef X_IS_L6470 +#if ENABLED(X_IS_L6470) extern L6470 stepperX; #undef X_ENABLE_INIT #define X_ENABLE_INIT ((void)0) @@ -308,7 +308,7 @@ #define X_DIR_READ (stepperX.getStatus() & STATUS_DIR) #endif -#ifdef X2_IS_L6470 +#if ENABLED(X2_IS_L6470) extern L6470 stepperX2; #undef X2_ENABLE_INIT #define X2_ENABLE_INIT ((void)0) @@ -328,7 +328,7 @@ #undef X2_DIR_READ #define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR) #endif -#ifdef Y_IS_L6470 +#if ENABLED(Y_IS_L6470) extern L6470 stepperY; #undef Y_ENABLE_INIT #define Y_ENABLE_INIT ((void)0) @@ -348,7 +348,7 @@ #undef Y_DIR_READ #define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR) #endif -#ifdef Y2_IS_L6470 +#if ENABLED(Y2_IS_L6470) extern L6470 stepperY2; #undef Y2_ENABLE_INIT #define Y2_ENABLE_INIT ((void)0) @@ -368,7 +368,7 @@ #undef Y2_DIR_READ #define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR) #endif -#ifdef Z_IS_L6470 +#if ENABLED(Z_IS_L6470) extern L6470 stepperZ; #undef Z_ENABLE_INIT #define Z_ENABLE_INIT ((void)0) @@ -388,7 +388,7 @@ #undef Y_DIR_READ #define Y_DIR_READ (stepperZ.getStatus() & STATUS_DIR) #endif -#ifdef Z2_IS_L6470 +#if ENABLED(Z2_IS_L6470) extern L6470 stepperZ2; #undef Z2_ENABLE_INIT #define Z2_ENABLE_INIT ((void)0) @@ -408,7 +408,7 @@ #undef Y2_DIR_READ #define Y2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR) #endif -#ifdef E0_IS_L6470 +#if ENABLED(E0_IS_L6470) extern L6470 stepperE0; #undef E0_ENABLE_INIT #define E0_ENABLE_INIT ((void)0) @@ -428,7 +428,7 @@ #undef E0_DIR_READ #define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR) #endif -#ifdef E1_IS_L6470 +#if ENABLED(E1_IS_L6470) extern L6470 stepperE1; #undef E1_ENABLE_INIT #define E1_ENABLE_INIT ((void)0) @@ -448,7 +448,7 @@ #undef E1_DIR_READ #define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR) #endif -#ifdef E2_IS_L6470 +#if ENABLED(E2_IS_L6470) extern L6470 stepperE2; #undef E2_ENABLE_INIT #define E2_ENABLE_INIT ((void)0) @@ -468,7 +468,7 @@ #undef E2_DIR_READ #define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR) #endif -#ifdef E3_IS_L6470 +#if ENABLED(E3_IS_L6470) extern L6470 stepperE3; #undef E3_ENABLE_INIT #define E3_ENABLE_INIT ((void)0)