Update Marlin/Configuration.h

master
linagee 13 years ago
parent dd9144994e
commit c4490f5f3d

@ -38,19 +38,25 @@
//===========================================================================
//=============================Thermal Settings ============================
//===========================================================================
//
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
//
//// Temperature sensor settings:
// -2 is thermocouple with MAX6675 (only for sensor 0)
// -1 is thermocouple with AD595
// 0 is not used
// 1 is 100k thermistor - best choice for EPCOS 100k
// 2 is 200k thermistor
// 3 is mendel-parts thermistor
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
// 3 is mendel-parts thermistor (4.7k pullup)
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
// 5 is ParCan supplied 104GT-2 100K
// 6 is EPCOS 100k - Not as accurate as table 1 (created using a fluke thermocouple)
// 7 is 100k Honeywell thermistor 135-104LAG-J01
// 8 is EPCOS 100k - 1Kohm RESISTOR PULLUP ONLY! SEE therm table, should give twice resolution from 150C to 200C - EXPERIMENTAL!
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
//
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
// (but gives greater accuracy and more stable PID)
// 51 is 100k thermistor - EPCOS (1k pullup)
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
#define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 0

Loading…
Cancel
Save