diff --git a/Marlin/Conditionals_LulzBot.h b/Marlin/Conditionals_LulzBot.h
index e11d910dd..e973aedda 100644
--- a/Marlin/Conditionals_LulzBot.h
+++ b/Marlin/Conditionals_LulzBot.h
@@ -39,7 +39,7 @@
     #error Must specify model and toolhead. Please see "Configuration_LulzBot.h" for directions.
 #endif
 
-#define LULZBOT_FW_VERSION ".1"
+#define LULZBOT_FW_VERSION ".2"
 
 // Select options based on printer model
 
@@ -482,6 +482,7 @@
      */
     #define LULZBOT_HIDE_ACTIVE_NOZZLE_IN_LCD
     #define LULZBOT_HIDE_PID_CONFIG_IN_LCD
+    #define LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD
     #define LULZBOT_SCROLL_LONG_FILE_NAMES
 #endif
 
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 7d3d4d130..92ed93715 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -224,7 +224,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 50ce3fee5..a304cbc92 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -12725,7 +12725,6 @@ void prepare_move_to_destination() {
 #endif // BEZIER_CURVE_SUPPORT
 
 #if ENABLED(USE_CONTROLLER_FAN)
-
   void controllerFan() {
     static millis_t lastMotorOn = 0, // Last time a motor was turned on
                     nextMotorCheck = 0; // Last time the state was checked
diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h
index 6aec9be8f..d3516cbd6 100644
--- a/Marlin/pins_RAMBO.h
+++ b/Marlin/pins_RAMBO.h
@@ -162,10 +162,10 @@
 
 #if defined(LULZBOT_EXTRUDER_FAN_ON_PIN_6)
   #define FAN_PIN           6
-  //#define FAN1_PIN          8
+  #define FAN1_PIN          8
 #else
   #define FAN_PIN           8
-  //#define FAN1_PIN          6
+  #define FAN1_PIN          6
 #endif
 
 #define FAN2_PIN            2
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index be20602e1..0c66a407d 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -1220,10 +1220,10 @@ void kill_screen(const char* lcd_msg) {
         #endif
         MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_1ST_FAN_SPEED, &fanSpeeds[0], 0, 255);
       #endif
-      #if HAS_FAN1
+      #if HAS_FAN1 && !defined(LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD)
         MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255);
       #endif
-      #if HAS_FAN2
+      #if HAS_FAN2 && !defined(LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD)
         MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255);
       #endif
     #endif // FAN_COUNT > 0
@@ -3123,10 +3123,10 @@ void kill_screen(const char* lcd_msg) {
         #endif
         MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_1ST_FAN_SPEED, &fanSpeeds[0], 0, 255);
       #endif
-      #if HAS_FAN1
+      #if HAS_FAN1 && !defined(LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD)
         MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255);
       #endif
-      #if HAS_FAN2
+      #if HAS_FAN2 && !defined(LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD)
         MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255);
       #endif
     #endif // FAN_COUNT > 0