Added check for Delta printers in Mesh, #error not yet supported.

10 years ago · d27c82a450
parent 9a093b2e8f
commit d27c82a450
11 changed files with 55 additions and 0 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -399,6 +399,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@ -417,6 +417,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -369,6 +369,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -392,6 +392,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -397,6 +397,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -421,6 +421,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -389,6 +389,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10