From d2ae5b00d97bde1fdf613a62db734dbec7a1c7ab Mon Sep 17 00:00:00 2001 From: Bo Herrmannsen Date: Mon, 15 Aug 2016 13:26:32 +0200 Subject: [PATCH] Danish up to date (18 Aug 2016) --- Marlin/language_da.h | 117 +++++++++++++++++++++++++++++++++---------- 1 file changed, 90 insertions(+), 27 deletions(-) diff --git a/Marlin/language_da.h b/Marlin/language_da.h index b4cf853ad..88fa8bc29 100644 --- a/Marlin/language_da.h +++ b/Marlin/language_da.h @@ -39,19 +39,19 @@ #define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters #define MSG_MAIN "Menu" #define MSG_AUTOSTART "Autostart" -#define MSG_DISABLE_STEPPERS "SlÃ¥ alle steppere fra" +#define MSG_DISABLE_STEPPERS "Slå alle steppere fra" #define MSG_AUTO_HOME "Auto Home" // G28 #define MSG_AUTO_HOME_X "Home X" #define MSG_AUTO_HOME_Y "Home Y" #define MSG_AUTO_HOME_Z "Home Z" #define MSG_LEVEL_BED_HOMING "Homing XYZ" -#define MSG_LEVEL_BED_WAITING "Tryk for at starte bed level" -#define MSG_LEVEL_BED_NEXT_POINT "Næste punkt" -#define MSG_LEVEL_BED_DONE "Bed level er færdig!" +#define MSG_LEVEL_BED_WAITING "Klik når du er klar" +#define MSG_LEVEL_BED_NEXT_POINT "Næste punkt" +#define MSG_LEVEL_BED_DONE "Bed level er færdig!" #define MSG_LEVEL_BED_CANCEL "Annuller bed level" -#define MSG_SET_HOME_OFFSETS "Sæt forskyding af home" -#define MSG_HOME_OFFSETS_APPLIED "Forskydninger af home pos. er tilføjet" -#define MSG_SET_ORIGIN "Sæt origin" +#define MSG_SET_HOME_OFFSETS "Sæt forsk. af home" +#define MSG_HOME_OFFSETS_APPLIED "Forsk. er nu aktiv" +#define MSG_SET_ORIGIN "Sæt origin" #define MSG_PREHEAT_1 "Forvarm PLA" #define MSG_PREHEAT_1_N "Forvarm PLA " #define MSG_PREHEAT_1_ALL "Forvarm PLA Alle" @@ -62,9 +62,9 @@ #define MSG_PREHEAT_2_ALL "Forvarm ABS Alle" #define MSG_PREHEAT_2_BEDONLY "Forvarm ABS Bed" #define MSG_PREHEAT_2_SETTINGS "Forvarm ABS conf" -#define MSG_COOLDOWN "Afkøl" -#define MSG_SWITCH_PS_ON "SlÃ¥ strøm til" -#define MSG_SWITCH_PS_OFF "SlÃ¥ strøm fra" +#define MSG_COOLDOWN "Afkøl" +#define MSG_SWITCH_PS_ON "Slå strøm til" +#define MSG_SWITCH_PS_OFF "Slå strøm fra" #define MSG_EXTRUDE "Extruder" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Flyt akser" @@ -79,8 +79,9 @@ #define MSG_SPEED "Hastighed" #define MSG_BED_Z "Plade Z" #define MSG_NOZZLE "Dyse" + #define MSG_BED "Plade" -#define MSG_FAN_SPEED "Blæser hastighed" +#define MSG_FAN_SPEED "Blæser hastighed" #define MSG_FLOW "Flow" #define MSG_CONTROL "Kontrol" #define MSG_MIN " \002 Min" @@ -93,6 +94,7 @@ #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" +#define MSG_SELECT "Vælg" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" @@ -108,7 +110,7 @@ #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" #define MSG_TEMPERATURE "Temperatur" -#define MSG_MOTION "Bevægelse" +#define MSG_MOTION "Bevægelse" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." @@ -117,24 +119,24 @@ #define MSG_LOAD_EPROM "Hent fra EEPROM" #define MSG_RESTORE_FAILSAFE "Gendan failsafe" #define MSG_REFRESH "Genopfrisk" -#define MSG_WATCH "Info skærm" +#define MSG_WATCH "Info skærm" #define MSG_PREPARE "Forbered" #define MSG_TUNE "Tune" #define MSG_PAUSE_PRINT "Pause printet" -#define MSG_RESUME_PRINT "Forsæt printet" +#define MSG_RESUME_PRINT "Forsæt printet" #define MSG_STOP_PRINT "Stop printet" #define MSG_CARD_MENU "Print fra SD" #define MSG_NO_CARD "Intet SD kort" #define MSG_DWELL "Dvale..." -#define MSG_USERWAIT "Venter pÃ¥ bruger..." -#define MSG_RESUMING "Forsætter printet" +#define MSG_USERWAIT "Venter på bruger..." +#define MSG_RESUMING "Forsætter printet" #define MSG_PRINT_ABORTED "Print annulleret" -#define MSG_NO_MOVE "Ingen bevægelse." -#define MSG_KILLED "DRÆBT. " +#define MSG_NO_MOVE "Ingen bevægelse." +#define MSG_KILLED "DRÆBT. " #define MSG_STOPPED "STOPPET. " -#define MSG_CONTROL_RETRACT "Tilbagetræk mm" +#define MSG_CONTROL_RETRACT "Tilbagetræk mm" #define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm" -#define MSG_CONTROL_RETRACTF "Tilbagetræk V" +#define MSG_CONTROL_RETRACTF "Tilbagetræk V" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm" @@ -145,19 +147,24 @@ #define MSG_CNG_SDCARD "Skift SD kort" #define MSG_ZPROBE_OUT "Probe udenfor plade" #define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST -#define MSG_FIRST "first" +#define MSG_FIRST "først" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" -#define MSG_HEATING_FAILED_LCD "Opvarmning mislykkedes" +#define MSG_HEATING_FAILED_LCD "Opvarmning fejlet" #define MSG_ERR_REDUNDANT_TEMP "Fejl: reserve temp" -#define MSG_THERMAL_RUNAWAY "Temp løber løbsk" -#define MSG_ERR_MAXTEMP "Fejl: Maks temp" -#define MSG_ERR_MINTEMP "Fejl: Min temp" -#define MSG_ERR_MAXTEMP_BED "Fejl: Maks Plsde temp" -#define MSG_ERR_MINTEMP_BED "Fejl: Min Plade temp" +#define MSG_THERMAL_RUNAWAY "Temp løber løbsk" +#define MSG_ERR_MAXTEMP "Fejl: MAKSTEMP" +#define MSG_ERR_MINTEMP "Fejl: MINTEMP" +#define MSG_ERR_MAXTEMP_BED "Fejl: MAKSTEMP PLADE" +#define MSG_ERR_MINTEMP_BED "Fejl: MINTEMP PLADE" +#define MSG_HALTED "PRINTER HALTED" +#define MSG_PLEASE_RESET "Reset venligst" +#define MSG_SHORT_DAY "d" // One character only +#define MSG_SHORT_HOUR "h" // One character only +#define MSG_SHORT_MINUTE "m" // One character only #define MSG_HEATING "Opvarmer..." #define MSG_HEATING_COMPLETE "Opvarmet" #define MSG_BED_HEATING "Opvarmer plade" @@ -168,4 +175,60 @@ #define MSG_DELTA_CALIBRATE_Z "Kalibrer Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibrerings Center" +#define MSG_INFO_MENU "Om Printer" +#define MSG_INFO_PRINTER_MENU "Printer Info" +#define MSG_INFO_STATS_MENU "Printer Stat." +#define MSG_INFO_BOARD_MENU "Board Info" +#define MSG_INFO_THERMISTOR_MENU "Thermistors" +#define MSG_INFO_EXTRUDERS "Extrudere" +#define MSG_INFO_BAUDRATE "Baud" +#define MSG_INFO_PROTOCOL "Protocol" + +#if LCD_WIDTH > 19 + #define MSG_INFO_PRINT_COUNT "Antal Print" + #define MSG_INFO_COMPLETED_PRINTS "Færdige" + #define MSG_INFO_PRINT_TIME "Total print tid" + #define MSG_INFO_PRINT_LONGEST "Længste print tid" + #define MSG_INFO_PRINT_FILAMENT "Total extruderet" +#else + #define MSG_INFO_PRINT_COUNT "Prints" + #define MSG_INFO_COMPLETED_PRINTS "Færdige" + #define MSG_INFO_PRINT_TIME "Total" + #define MSG_INFO_PRINT_LONGEST "Længste" + #define MSG_INFO_PRINT_FILAMENT "Extruderet" +#endif + +#define MSG_INFO_MIN_TEMP "Min Temp" +#define MSG_INFO_MAX_TEMP "Max Temp" +#define MSG_INFO_PSU "Strømforsyning" + +#define MSG_FILAMENT_CHANGE_HEADER "SKIFT FILAMENT" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER "SKIFTE MULIGHEDER:" +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruder mere" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "forsæt print" + +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 "Vent på" + #define MSG_FILAMENT_CHANGE_INIT_2 "skift af " + #define MSG_FILAMENT_CHANGE_INIT_3 "filament" + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vent på" + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament tømning" + #define MSG_FILAMENT_CHANGE_INSERT_1 "indsæt filament" + #define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk for" + #define MSG_FILAMENT_CHANGE_INSERT_3 "at fortsætte..." + #define MSG_FILAMENT_CHANGE_LOAD_1 "Vent på" + #define MSG_FILAMENT_CHANGE_LOAD_2 "filament fødning" + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vent på" + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudere" + #define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at" + #define MSG_FILAMENT_CHANGE_RESUME_2 "print forsætter" +#else // LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 "Vent venligst..." + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Tømmer..." + #define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt og klik" + #define MSG_FILAMENT_CHANGE_LOAD_1 "Føder..." + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudere..." + #define MSG_FILAMENT_CHANGE_RESUME_1 "Fortsætter..." +#endif // LCD_HEIGHT < 4 + #endif // LANGUAGE_DA_H