diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 5352bc5e1..d78417ad5 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -217,6 +217,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 // Felix Foil Heater
    #define DEFAULT_bedKp 103.37
    #define DEFAULT_bedKi 2.79
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 0b437d107..bef71478c 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -234,6 +234,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 6061e739f..30ad8de68 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -253,6 +253,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
 //    #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index b98c72437..5ca7d9fe2 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -243,6 +243,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 1d85ac56c..d2ccce867 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -256,6 +256,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
 //    #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 53ce0bad3..20eae4e90 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -233,6 +233,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index f86b2da38..8c3356fe0 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -260,6 +260,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 4820f5890..34019e999 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -260,6 +260,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index cf8cd0b9d..4724611a0 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -260,6 +260,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 3472a46e9..ca609f8eb 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -256,6 +256,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //Kossel Pro heated bed plate with borosilicate glass
 //from pidautotune (M303 E-1 S60 C8)
     #define  DEFAULT_bedKp 370.25
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index a5f04cf48..e73cebe9c 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 92ed23f2f..33496aa73 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -232,6 +232,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00