diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 929b2bd0f..fce4276c2 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -526,7 +526,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 95e9f26b1..91f60ac97 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -525,7 +525,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 64900ea70..b0722de82 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -508,7 +508,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 632684691..7b132a042 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -506,7 +506,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 41c18990f..2145ef70f 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -518,7 +518,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index 25c4f50e8..4ba5f76f6 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -520,7 +520,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 7db2e5c7a..17550e36e 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -543,7 +543,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 46df1351f..a8e066359 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -526,7 +526,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index f90297638..69e4c58ed 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -520,7 +520,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 442d5bfd3..67479d19f 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -534,7 +534,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 6ab386e53..4e5557592 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -547,7 +547,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 899cd9e41..0192986f9 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -518,7 +518,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 758d22857..1d87953b9 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -526,7 +526,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 6965f70e1..fcf2b7157 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -568,7 +568,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 83a50c6f3..c4fd89998 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -568,7 +568,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 788526c25..8cb091cba 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -568,7 +568,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index e3271e084..6708e9efb 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -557,7 +557,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 1dd5e083d..3406ccce8 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -566,7 +566,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index a90e28ffd..4e1ac305e 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -529,7 +529,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index c06935a0d..8c72adb15 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -516,7 +516,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = true;  // Should be uncommented and true or false should assigned
+  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif