From e2b022cce2af43e472fa329fd8c7ef332e4034a1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 6 Mar 2016 01:49:20 -0800 Subject: [PATCH] Include #3053 --- .../Hephestos_2/Configuration.h | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index c7e1b02ae..23cb359ba 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -484,8 +484,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // Z probe to nozzle X offset: -left +right #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Z probe to nozzle Y offset: -front +behind #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle Z offset: -below (always!)