Disable BABYSTEP_XY by default in all configs

7 years ago · f25dccd6d1
parent cd09a83cfa
commit f25dccd6d1
29 changed files with 30 additions and 30 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -181,7 +181,7 @@
 */
 //#define PARKING_EXTRUDER
 #if ENABLED(PARKING_EXTRUDER)
-  #define PARKING_EXTRUDER_SOLENOIDS_INVERT           // If enabled, the solenoid not magnetized with applied voltage
+  #define PARKING_EXTRUDER_SOLENOIDS_INVERT           // If enabled, the solenoid is NOT magnetized with applied voltage
  #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW  // LOW or HIGH pin signal energizes the coil
  #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250        // Delay (ms) for magnetic field. No delay if 0 or not defined.
  #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -222,7 +222,7 @@

 /**
 * Part-Cooling Fan Multiplexer
- * 
+ *
 * This feature allows you to digitally multiplex the fan output.
 * The multiplexer is automatically switched at tool-change.
 * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Folger
+++ b/Marlin/example_configurations/Folger
@ -601,7 +601,7 @@
 */
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 2 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Sanguinololu/Configuration.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration.h
@ -181,7 +181,7 @@
 */
 //#define PARKING_EXTRUDER
 #if ENABLED(PARKING_EXTRUDER)
-  #define PARKING_EXTRUDER_SOLENOIDS_INVERT           // If enabled, the solenoid not magnetized with applied voltage
+  #define PARKING_EXTRUDER_SOLENOIDS_INVERT           // If enabled, the solenoid is NOT magnetized with applied voltage
  #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW  // LOW or HIGH pin signal energizes the coil
  #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250        // Delay (ms) for magnetic field. No delay if 0 or not defined.
  #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@ -590,7 +590,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@ -614,7 +614,7 @@
 */
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@ -603,7 +603,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -603,7 +603,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -603,7 +603,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -608,7 +608,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -603,7 +603,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@ -601,7 +601,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY            // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
  //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping