diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 3a1983956..558044e28 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -232,7 +232,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th // minimum time in microseconds that a movement needs to take if the buffer is emptied. Increase this number if you see blobs while printing high speed & high detail. It will slowdown on the detailed stuff. #define DEFAULT_MINSEGMENTTIME 20000 // Obsolete delete this -#define DEFAULT_XYJERK 30.0 // (mm/sec) +#define DEFAULT_XYJERK 20.0 // (mm/sec) #define DEFAULT_ZJERK 0.4 // (mm/sec) diff --git a/Marlin/EEPROMwrite.h b/Marlin/EEPROMwrite.h index 3d559c026..c298c9735 100644 --- a/Marlin/EEPROMwrite.h +++ b/Marlin/EEPROMwrite.h @@ -4,6 +4,7 @@ #include "Marlin.h" #include "planner.h" #include "temperature.h" + #include template int EEPROM_writeAnything(int &ee, const T& value) diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index acfc3c2fa..57f403dff 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -3,10 +3,12 @@ // Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware. // Licence: GPL +#define HardwareSerial_h // trick to disable the standard HWserial #include #include "fastio.h" #include #include "Configuration.h" +#include "MarlinSerial.h" //#define SERIAL_ECHO(x) Serial << "echo: " << x; //#define SERIAL_ECHOLN(x) Serial << "echo: "< 0 && buflen < BUFSIZE) { - serial_char = Serial.read(); + while( MSerial.available() > 0 && buflen < BUFSIZE) { + serial_char = MSerial.read(); if(serial_char == '\n' || serial_char == '\r' || serial_char == ':' || serial_count >= (MAX_CMD_SIZE - 1) ) { if(!serial_count) return; //if empty line @@ -1039,7 +1032,7 @@ inline void process_commands() void FlushSerialRequestResend() { //char cmdbuffer[bufindr][100]="Resend:"; - Serial.flush(); + MSerial.flush(); SERIAL_PROTOCOLPGM("Resend:"); SERIAL_PROTOCOLLN(gcode_LastN + 1); ClearToSend(); @@ -1088,7 +1081,7 @@ void prepare_move() if (destination[Z_AXIS] > Z_MAX_LENGTH) destination[Z_AXIS] = Z_MAX_LENGTH; } - plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0); + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder); for(int8_t i=0; i < NUM_AXIS; i++) { current_position[i] = destination[i]; } @@ -1098,7 +1091,7 @@ void prepare_arc_move(char isclockwise) { float r = hypot(offset[X_AXIS], offset[Y_AXIS]); // Compute arc radius for mc_arc // Trace the arc - mc_arc(current_position, destination, offset, X_AXIS, Y_AXIS, Z_AXIS, feedrate*feedmultiply/60/100.0, r, isclockwise); + mc_arc(current_position, destination, offset, X_AXIS, Y_AXIS, Z_AXIS, feedrate*feedmultiply/60/100.0, r, isclockwise, active_extruder); // As far as the parser is concerned, the position is now == target. In reality the // motion control system might still be processing the action and the real tool position @@ -1108,10 +1101,6 @@ void prepare_arc_move(char isclockwise) { } } - - - - void manage_inactivity(byte debug) { if( (millis()-previous_millis_cmd) > max_inactive_time ) diff --git a/Marlin/MarlinSerial.cpp b/Marlin/MarlinSerial.cpp new file mode 100644 index 000000000..fade8b293 --- /dev/null +++ b/Marlin/MarlinSerial.cpp @@ -0,0 +1,213 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include "wiring.h" +#include "wiring_private.h" + +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) + +#include "MarlinSerial.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + +struct ring_buffer +{ + unsigned char buffer[RX_BUFFER_SIZE]; + int head; + int tail; +}; + +#if defined(UBRRH) || defined(UBRR0H) + ring_buffer rx_buffer = { { 0 }, 0, 0 }; +#endif + + +inline void store_char(unsigned char c, ring_buffer *rx_buffer) +{ + int i = (unsigned int)(rx_buffer->head + 1) % RX_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != rx_buffer->tail) { + rx_buffer->buffer[rx_buffer->head] = c; + rx_buffer->head = i; + } +} + + +//#elif defined(SIG_USART_RECV) +#if defined(USART0_RX_vect) + // fixed by Mark Sproul this is on the 644/644p + //SIGNAL(SIG_USART_RECV) + SIGNAL(USART0_RX_vect) + { + #if defined(UDR0) + unsigned char c = UDR0; + #elif defined(UDR) + unsigned char c = UDR; // atmega8, atmega32 + #else + #error UDR not defined + #endif + store_char(c, &rx_buffer); + } +#endif + +// Constructors //////////////////////////////////////////////////////////////// + +MarlinSerial::MarlinSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udre = udre; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void MarlinSerial::begin(long baud) +{ + uint16_t baud_setting; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); +} + +void MarlinSerial::end() +{ + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); +} + +int MarlinSerial::available(void) +{ + return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE; +} + +int MarlinSerial::peek(void) +{ + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + return _rx_buffer->buffer[_rx_buffer->tail]; + } +} + +int MarlinSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % RX_BUFFER_SIZE; + return c; + } +} + +void MarlinSerial::flush() +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + _rx_buffer->head = _rx_buffer->tail; +} + +void MarlinSerial::write(uint8_t c) +{ + while (!((*_ucsra) & (1 << _udre))) + ; + + *_udr = c; +} + +void MarlinSerial::checkRx() +{ + if((UCSR0A & (1< + +#include "Stream.h" + +struct ring_buffer; + +class MarlinSerial : public Stream +{ + private: + ring_buffer *_rx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udre; + uint8_t _u2x; + public: + MarlinSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x); + void begin(long); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + virtual void flush(void); + virtual void write(uint8_t); + virtual void checkRx(void); + using Print::write; // pull in write(str) and write(buf, size) from Print +}; + +#if defined(UBRRH) || defined(UBRR0H) + extern MarlinSerial MSerial; +#endif + +#endif diff --git a/Marlin/Sd2Card.cpp b/Marlin/Sd2Card.cpp index ab060c121..4ca641ef9 100644 --- a/Marlin/Sd2Card.cpp +++ b/Marlin/Sd2Card.cpp @@ -1,642 +1,643 @@ -/* Arduino Sd2Card Library - * Copyright (C) 2009 by William Greiman - * - * This file is part of the Arduino Sd2Card Library - * - * This Library is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This Library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with the Arduino Sd2Card Library. If not, see - * . - */ -#if ARDUINO < 100 -#include -#else // ARDUINO -#include -#endif // ARDUINO -#include "Sd2Card.h" -//------------------------------------------------------------------------------ -#ifndef SOFTWARE_SPI -// functions for hardware SPI -//------------------------------------------------------------------------------ -// make sure SPCR rate is in expected bits -#if (SPR0 != 0 || SPR1 != 1) -#error unexpected SPCR bits -#endif -/** - * Initialize hardware SPI - * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] - */ -static void spiInit(uint8_t spiRate) { - // See avr processor documentation - SPCR = (1 << SPE) | (1 << MSTR) | (spiRate >> 1); - SPSR = spiRate & 1 || spiRate == 6 ? 0 : 1 << SPI2X; -} -//------------------------------------------------------------------------------ -/** SPI receive a byte */ -static uint8_t spiRec() { - SPDR = 0XFF; - while (!(SPSR & (1 << SPIF))); - return SPDR; -} -//------------------------------------------------------------------------------ -/** SPI read data - only one call so force inline */ -static inline __attribute__((always_inline)) - void spiRead(uint8_t* buf, uint16_t nbyte) { - if (nbyte-- == 0) return; - SPDR = 0XFF; - for (uint16_t i = 0; i < nbyte; i++) { - while (!(SPSR & (1 << SPIF))); - buf[i] = SPDR; - SPDR = 0XFF; - } - while (!(SPSR & (1 << SPIF))); - buf[nbyte] = SPDR; -} -//------------------------------------------------------------------------------ -/** SPI send a byte */ -static void spiSend(uint8_t b) { - SPDR = b; - while (!(SPSR & (1 << SPIF))); -} -//------------------------------------------------------------------------------ -/** SPI send block - only one call so force inline */ -static inline __attribute__((always_inline)) - void spiSendBlock(uint8_t token, const uint8_t* buf) { - SPDR = token; - for (uint16_t i = 0; i < 512; i += 2) { - while (!(SPSR & (1 << SPIF))); - SPDR = buf[i]; - while (!(SPSR & (1 << SPIF))); - SPDR = buf[i + 1]; - } - while (!(SPSR & (1 << SPIF))); -} -//------------------------------------------------------------------------------ -#else // SOFTWARE_SPI -//------------------------------------------------------------------------------ -/** nop to tune soft SPI timing */ -#define nop asm volatile ("nop\n\t") -//------------------------------------------------------------------------------ -/** Soft SPI receive byte */ -static uint8_t spiRec() { - uint8_t data = 0; - // no interrupts during byte receive - about 8 us - cli(); - // output pin high - like sending 0XFF - fastDigitalWrite(SPI_MOSI_PIN, HIGH); - - for (uint8_t i = 0; i < 8; i++) { - fastDigitalWrite(SPI_SCK_PIN, HIGH); - - // adjust so SCK is nice - nop; - nop; - - data <<= 1; - - if (fastDigitalRead(SPI_MISO_PIN)) data |= 1; - - fastDigitalWrite(SPI_SCK_PIN, LOW); - } - // enable interrupts - sei(); - return data; -} -//------------------------------------------------------------------------------ -/** Soft SPI read data */ -static void spiRead(uint8_t* buf, uint16_t nbyte) { - for (uint16_t i = 0; i < nbyte; i++) { - buf[i] = spiRec(); - } -} -//------------------------------------------------------------------------------ -/** Soft SPI send byte */ -static void spiSend(uint8_t data) { - // no interrupts during byte send - about 8 us - cli(); - for (uint8_t i = 0; i < 8; i++) { - fastDigitalWrite(SPI_SCK_PIN, LOW); - - fastDigitalWrite(SPI_MOSI_PIN, data & 0X80); - - data <<= 1; - - fastDigitalWrite(SPI_SCK_PIN, HIGH); - } - // hold SCK high for a few ns - nop; - nop; - nop; - nop; - - fastDigitalWrite(SPI_SCK_PIN, LOW); - // enable interrupts - sei(); -} -//------------------------------------------------------------------------------ -/** Soft SPI send block */ - void spiSendBlock(uint8_t token, const uint8_t* buf) { - spiSend(token); - for (uint16_t i = 0; i < 512; i++) { - spiSend(buf[i]); - } -} -#endif // SOFTWARE_SPI -//------------------------------------------------------------------------------ -// send command and return error code. Return zero for OK -uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) { - // select card - chipSelectLow(); - - // wait up to 300 ms if busy - waitNotBusy(300); - - // send command - spiSend(cmd | 0x40); - - // send argument - for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s); - - // send CRC - uint8_t crc = 0XFF; - if (cmd == CMD0) crc = 0X95; // correct crc for CMD0 with arg 0 - if (cmd == CMD8) crc = 0X87; // correct crc for CMD8 with arg 0X1AA - spiSend(crc); - - // skip stuff byte for stop read - if (cmd == CMD12) spiRec(); - - // wait for response - for (uint8_t i = 0; ((status_ = spiRec()) & 0X80) && i != 0XFF; i++); - return status_; -} -//------------------------------------------------------------------------------ -/** - * Determine the size of an SD flash memory card. - * - * \return The number of 512 byte data blocks in the card - * or zero if an error occurs. - */ -uint32_t Sd2Card::cardSize() { - csd_t csd; - if (!readCSD(&csd)) return 0; - if (csd.v1.csd_ver == 0) { - uint8_t read_bl_len = csd.v1.read_bl_len; - uint16_t c_size = (csd.v1.c_size_high << 10) - | (csd.v1.c_size_mid << 2) | csd.v1.c_size_low; - uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1) - | csd.v1.c_size_mult_low; - return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7); - } else if (csd.v2.csd_ver == 1) { - uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16) - | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low; - return (c_size + 1) << 10; - } else { - error(SD_CARD_ERROR_BAD_CSD); - return 0; - } -} -//------------------------------------------------------------------------------ -void Sd2Card::chipSelectHigh() { - digitalWrite(chipSelectPin_, HIGH); -} -//------------------------------------------------------------------------------ -void Sd2Card::chipSelectLow() { -#ifndef SOFTWARE_SPI - spiInit(spiRate_); -#endif // SOFTWARE_SPI - digitalWrite(chipSelectPin_, LOW); -} -//------------------------------------------------------------------------------ -/** Erase a range of blocks. - * - * \param[in] firstBlock The address of the first block in the range. - * \param[in] lastBlock The address of the last block in the range. - * - * \note This function requests the SD card to do a flash erase for a - * range of blocks. The data on the card after an erase operation is - * either 0 or 1, depends on the card vendor. The card must support - * single block erase. - * - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { - csd_t csd; - if (!readCSD(&csd)) goto fail; - // check for single block erase - if (!csd.v1.erase_blk_en) { - // erase size mask - uint8_t m = (csd.v1.sector_size_high << 1) | csd.v1.sector_size_low; - if ((firstBlock & m) != 0 || ((lastBlock + 1) & m) != 0) { - // error card can't erase specified area - error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK); - goto fail; - } - } - if (type_ != SD_CARD_TYPE_SDHC) { - firstBlock <<= 9; - lastBlock <<= 9; - } - if (cardCommand(CMD32, firstBlock) - || cardCommand(CMD33, lastBlock) - || cardCommand(CMD38, 0)) { - error(SD_CARD_ERROR_ERASE); - goto fail; - } - if (!waitNotBusy(SD_ERASE_TIMEOUT)) { - error(SD_CARD_ERROR_ERASE_TIMEOUT); - goto fail; - } - chipSelectHigh(); - return true; - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** Determine if card supports single block erase. - * - * \return The value one, true, is returned if single block erase is supported. - * The value zero, false, is returned if single block erase is not supported. - */ -bool Sd2Card::eraseSingleBlockEnable() { - csd_t csd; - return readCSD(&csd) ? csd.v1.erase_blk_en : false; -} -//------------------------------------------------------------------------------ -/** - * Initialize an SD flash memory card. - * - * \param[in] sckRateID SPI clock rate selector. See setSckRate(). - * \param[in] chipSelectPin SD chip select pin number. - * - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. The reason for failure - * can be determined by calling errorCode() and errorData(). - */ -bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) { - errorCode_ = type_ = 0; - chipSelectPin_ = chipSelectPin; - // 16-bit init start time allows over a minute - uint16_t t0 = (uint16_t)millis(); - uint32_t arg; - - // set pin modes - pinMode(chipSelectPin_, OUTPUT); - chipSelectHigh(); - pinMode(SPI_MISO_PIN, INPUT); - pinMode(SPI_MOSI_PIN, OUTPUT); - pinMode(SPI_SCK_PIN, OUTPUT); - -#ifndef SOFTWARE_SPI - // SS must be in output mode even it is not chip select - pinMode(SS_PIN, OUTPUT); - // set SS high - may be chip select for another SPI device -#if SET_SPI_SS_HIGH - digitalWrite(SS_PIN, HIGH); -#endif // SET_SPI_SS_HIGH - // set SCK rate for initialization commands - spiRate_ = SPI_SD_INIT_RATE; - spiInit(spiRate_); -#endif // SOFTWARE_SPI - - // must supply min of 74 clock cycles with CS high. - for (uint8_t i = 0; i < 10; i++) spiSend(0XFF); - - // command to go idle in SPI mode - while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) { - if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { - error(SD_CARD_ERROR_CMD0); - goto fail; - } - } - // check SD version - if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) { - type(SD_CARD_TYPE_SD1); - } else { - // only need last byte of r7 response - for (uint8_t i = 0; i < 4; i++) status_ = spiRec(); - if (status_ != 0XAA) { - error(SD_CARD_ERROR_CMD8); - goto fail; - } - type(SD_CARD_TYPE_SD2); - } - // initialize card and send host supports SDHC if SD2 - arg = type() == SD_CARD_TYPE_SD2 ? 0X40000000 : 0; - - while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) { - // check for timeout - if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { - error(SD_CARD_ERROR_ACMD41); - goto fail; - } - } - // if SD2 read OCR register to check for SDHC card - if (type() == SD_CARD_TYPE_SD2) { - if (cardCommand(CMD58, 0)) { - error(SD_CARD_ERROR_CMD58); - goto fail; - } - if ((spiRec() & 0XC0) == 0XC0) type(SD_CARD_TYPE_SDHC); - // discard rest of ocr - contains allowed voltage range - for (uint8_t i = 0; i < 3; i++) spiRec(); - } - chipSelectHigh(); - -#ifndef SOFTWARE_SPI - return setSckRate(sckRateID); -#else // SOFTWARE_SPI - return true; -#endif // SOFTWARE_SPI - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** - * Read a 512 byte block from an SD card. - * - * \param[in] blockNumber Logical block to be read. - * \param[out] dst Pointer to the location that will receive the data. - - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) { - // use address if not SDHC card - if (type()!= SD_CARD_TYPE_SDHC) blockNumber <<= 9; - if (cardCommand(CMD17, blockNumber)) { - error(SD_CARD_ERROR_CMD17); - goto fail; - } - return readData(dst, 512); - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** Read one data block in a multiple block read sequence - * - * \param[in] dst Pointer to the location for the data to be read. - * - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::readData(uint8_t *dst) { - chipSelectLow(); - return readData(dst, 512); -} -//------------------------------------------------------------------------------ -bool Sd2Card::readData(uint8_t* dst, uint16_t count) { - // wait for start block token - uint16_t t0 = millis(); - while ((status_ = spiRec()) == 0XFF) { - if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) { - error(SD_CARD_ERROR_READ_TIMEOUT); - goto fail; - } - } - if (status_ != DATA_START_BLOCK) { - error(SD_CARD_ERROR_READ); - goto fail; - } - // transfer data - spiRead(dst, count); - - // discard CRC - spiRec(); - spiRec(); - chipSelectHigh(); - return true; - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** read CID or CSR register */ -bool Sd2Card::readRegister(uint8_t cmd, void* buf) { - uint8_t* dst = reinterpret_cast(buf); - if (cardCommand(cmd, 0)) { - error(SD_CARD_ERROR_READ_REG); - goto fail; - } - return readData(dst, 16); - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** Start a read multiple blocks sequence. - * - * \param[in] blockNumber Address of first block in sequence. - * - * \note This function is used with readData() and readStop() for optimized - * multiple block reads. SPI chipSelect must be low for the entire sequence. - * - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::readStart(uint32_t blockNumber) { - if (type()!= SD_CARD_TYPE_SDHC) blockNumber <<= 9; - if (cardCommand(CMD18, blockNumber)) { - error(SD_CARD_ERROR_CMD18); - goto fail; - } - chipSelectHigh(); - return true; - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** End a read multiple blocks sequence. - * -* \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::readStop() { - chipSelectLow(); - if (cardCommand(CMD12, 0)) { - error(SD_CARD_ERROR_CMD12); - goto fail; - } - chipSelectHigh(); - return true; - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** - * Set the SPI clock rate. - * - * \param[in] sckRateID A value in the range [0, 6]. - * - * The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum - * SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128 - * for \a scsRateID = 6. - * - * \return The value one, true, is returned for success and the value zero, - * false, is returned for an invalid value of \a sckRateID. - */ -bool Sd2Card::setSckRate(uint8_t sckRateID) { - if (sckRateID > 6) { - error(SD_CARD_ERROR_SCK_RATE); - return false; - } - spiRate_ = sckRateID; - return true; -} -//------------------------------------------------------------------------------ -// wait for card to go not busy -bool Sd2Card::waitNotBusy(uint16_t timeoutMillis) { - uint16_t t0 = millis(); - while (spiRec() != 0XFF) { - if (((uint16_t)millis() - t0) >= timeoutMillis) goto fail; - } - return true; - - fail: - return false; -} -//------------------------------------------------------------------------------ -/** - * Writes a 512 byte block to an SD card. - * - * \param[in] blockNumber Logical block to be written. - * \param[in] src Pointer to the location of the data to be written. - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) { - // use address if not SDHC card - if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; - if (cardCommand(CMD24, blockNumber)) { - error(SD_CARD_ERROR_CMD24); - goto fail; - } - if (!writeData(DATA_START_BLOCK, src)) goto fail; - - // wait for flash programming to complete - if (!waitNotBusy(SD_WRITE_TIMEOUT)) { - error(SD_CARD_ERROR_WRITE_TIMEOUT); - goto fail; - } - // response is r2 so get and check two bytes for nonzero - if (cardCommand(CMD13, 0) || spiRec()) { - error(SD_CARD_ERROR_WRITE_PROGRAMMING); - goto fail; - } - chipSelectHigh(); - return true; - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** Write one data block in a multiple block write sequence - * \param[in] src Pointer to the location of the data to be written. - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::writeData(const uint8_t* src) { - chipSelectLow(); - // wait for previous write to finish - if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; - if (!writeData(WRITE_MULTIPLE_TOKEN, src)) goto fail; - chipSelectHigh(); - return true; - - fail: - error(SD_CARD_ERROR_WRITE_MULTIPLE); - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -// send one block of data for write block or write multiple blocks -bool Sd2Card::writeData(uint8_t token, const uint8_t* src) { - spiSendBlock(token, src); - - spiSend(0xff); // dummy crc - spiSend(0xff); // dummy crc - - status_ = spiRec(); - if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) { - error(SD_CARD_ERROR_WRITE); - goto fail; - } - return true; - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** Start a write multiple blocks sequence. - * - * \param[in] blockNumber Address of first block in sequence. - * \param[in] eraseCount The number of blocks to be pre-erased. - * - * \note This function is used with writeData() and writeStop() - * for optimized multiple block writes. - * - * \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) { - // send pre-erase count - if (cardAcmd(ACMD23, eraseCount)) { - error(SD_CARD_ERROR_ACMD23); - goto fail; - } - // use address if not SDHC card - if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; - if (cardCommand(CMD25, blockNumber)) { - error(SD_CARD_ERROR_CMD25); - goto fail; - } - chipSelectHigh(); - return true; - - fail: - chipSelectHigh(); - return false; -} -//------------------------------------------------------------------------------ -/** End a write multiple blocks sequence. - * -* \return The value one, true, is returned for success and - * the value zero, false, is returned for failure. - */ -bool Sd2Card::writeStop() { - chipSelectLow(); - if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; - spiSend(STOP_TRAN_TOKEN); - if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; - chipSelectHigh(); - return true; - - fail: - error(SD_CARD_ERROR_STOP_TRAN); - chipSelectHigh(); - return false; +/* Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino Sd2Card Library. If not, see + * . + */ +#if ARDUINO < 100 +#define HardwareSerial_h // trick to disable the standard HWserial +#include +#else // ARDUINO +#include +#endif // ARDUINO +#include "Sd2Card.h" +//------------------------------------------------------------------------------ +#ifndef SOFTWARE_SPI +// functions for hardware SPI +//------------------------------------------------------------------------------ +// make sure SPCR rate is in expected bits +#if (SPR0 != 0 || SPR1 != 1) +#error unexpected SPCR bits +#endif +/** + * Initialize hardware SPI + * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] + */ +static void spiInit(uint8_t spiRate) { + // See avr processor documentation + SPCR = (1 << SPE) | (1 << MSTR) | (spiRate >> 1); + SPSR = spiRate & 1 || spiRate == 6 ? 0 : 1 << SPI2X; +} +//------------------------------------------------------------------------------ +/** SPI receive a byte */ +static uint8_t spiRec() { + SPDR = 0XFF; + while (!(SPSR & (1 << SPIF))); + return SPDR; +} +//------------------------------------------------------------------------------ +/** SPI read data - only one call so force inline */ +static inline __attribute__((always_inline)) + void spiRead(uint8_t* buf, uint16_t nbyte) { + if (nbyte-- == 0) return; + SPDR = 0XFF; + for (uint16_t i = 0; i < nbyte; i++) { + while (!(SPSR & (1 << SPIF))); + buf[i] = SPDR; + SPDR = 0XFF; + } + while (!(SPSR & (1 << SPIF))); + buf[nbyte] = SPDR; +} +//------------------------------------------------------------------------------ +/** SPI send a byte */ +static void spiSend(uint8_t b) { + SPDR = b; + while (!(SPSR & (1 << SPIF))); +} +//------------------------------------------------------------------------------ +/** SPI send block - only one call so force inline */ +static inline __attribute__((always_inline)) + void spiSendBlock(uint8_t token, const uint8_t* buf) { + SPDR = token; + for (uint16_t i = 0; i < 512; i += 2) { + while (!(SPSR & (1 << SPIF))); + SPDR = buf[i]; + while (!(SPSR & (1 << SPIF))); + SPDR = buf[i + 1]; + } + while (!(SPSR & (1 << SPIF))); +} +//------------------------------------------------------------------------------ +#else // SOFTWARE_SPI +//------------------------------------------------------------------------------ +/** nop to tune soft SPI timing */ +#define nop asm volatile ("nop\n\t") +//------------------------------------------------------------------------------ +/** Soft SPI receive byte */ +static uint8_t spiRec() { + uint8_t data = 0; + // no interrupts during byte receive - about 8 us + cli(); + // output pin high - like sending 0XFF + fastDigitalWrite(SPI_MOSI_PIN, HIGH); + + for (uint8_t i = 0; i < 8; i++) { + fastDigitalWrite(SPI_SCK_PIN, HIGH); + + // adjust so SCK is nice + nop; + nop; + + data <<= 1; + + if (fastDigitalRead(SPI_MISO_PIN)) data |= 1; + + fastDigitalWrite(SPI_SCK_PIN, LOW); + } + // enable interrupts + sei(); + return data; +} +//------------------------------------------------------------------------------ +/** Soft SPI read data */ +static void spiRead(uint8_t* buf, uint16_t nbyte) { + for (uint16_t i = 0; i < nbyte; i++) { + buf[i] = spiRec(); + } +} +//------------------------------------------------------------------------------ +/** Soft SPI send byte */ +static void spiSend(uint8_t data) { + // no interrupts during byte send - about 8 us + cli(); + for (uint8_t i = 0; i < 8; i++) { + fastDigitalWrite(SPI_SCK_PIN, LOW); + + fastDigitalWrite(SPI_MOSI_PIN, data & 0X80); + + data <<= 1; + + fastDigitalWrite(SPI_SCK_PIN, HIGH); + } + // hold SCK high for a few ns + nop; + nop; + nop; + nop; + + fastDigitalWrite(SPI_SCK_PIN, LOW); + // enable interrupts + sei(); +} +//------------------------------------------------------------------------------ +/** Soft SPI send block */ + void spiSendBlock(uint8_t token, const uint8_t* buf) { + spiSend(token); + for (uint16_t i = 0; i < 512; i++) { + spiSend(buf[i]); + } +} +#endif // SOFTWARE_SPI +//------------------------------------------------------------------------------ +// send command and return error code. Return zero for OK +uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) { + // select card + chipSelectLow(); + + // wait up to 300 ms if busy + waitNotBusy(300); + + // send command + spiSend(cmd | 0x40); + + // send argument + for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s); + + // send CRC + uint8_t crc = 0XFF; + if (cmd == CMD0) crc = 0X95; // correct crc for CMD0 with arg 0 + if (cmd == CMD8) crc = 0X87; // correct crc for CMD8 with arg 0X1AA + spiSend(crc); + + // skip stuff byte for stop read + if (cmd == CMD12) spiRec(); + + // wait for response + for (uint8_t i = 0; ((status_ = spiRec()) & 0X80) && i != 0XFF; i++); + return status_; +} +//------------------------------------------------------------------------------ +/** + * Determine the size of an SD flash memory card. + * + * \return The number of 512 byte data blocks in the card + * or zero if an error occurs. + */ +uint32_t Sd2Card::cardSize() { + csd_t csd; + if (!readCSD(&csd)) return 0; + if (csd.v1.csd_ver == 0) { + uint8_t read_bl_len = csd.v1.read_bl_len; + uint16_t c_size = (csd.v1.c_size_high << 10) + | (csd.v1.c_size_mid << 2) | csd.v1.c_size_low; + uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1) + | csd.v1.c_size_mult_low; + return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7); + } else if (csd.v2.csd_ver == 1) { + uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16) + | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low; + return (c_size + 1) << 10; + } else { + error(SD_CARD_ERROR_BAD_CSD); + return 0; + } +} +//------------------------------------------------------------------------------ +void Sd2Card::chipSelectHigh() { + digitalWrite(chipSelectPin_, HIGH); +} +//------------------------------------------------------------------------------ +void Sd2Card::chipSelectLow() { +#ifndef SOFTWARE_SPI + spiInit(spiRate_); +#endif // SOFTWARE_SPI + digitalWrite(chipSelectPin_, LOW); +} +//------------------------------------------------------------------------------ +/** Erase a range of blocks. + * + * \param[in] firstBlock The address of the first block in the range. + * \param[in] lastBlock The address of the last block in the range. + * + * \note This function requests the SD card to do a flash erase for a + * range of blocks. The data on the card after an erase operation is + * either 0 or 1, depends on the card vendor. The card must support + * single block erase. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { + csd_t csd; + if (!readCSD(&csd)) goto fail; + // check for single block erase + if (!csd.v1.erase_blk_en) { + // erase size mask + uint8_t m = (csd.v1.sector_size_high << 1) | csd.v1.sector_size_low; + if ((firstBlock & m) != 0 || ((lastBlock + 1) & m) != 0) { + // error card can't erase specified area + error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK); + goto fail; + } + } + if (type_ != SD_CARD_TYPE_SDHC) { + firstBlock <<= 9; + lastBlock <<= 9; + } + if (cardCommand(CMD32, firstBlock) + || cardCommand(CMD33, lastBlock) + || cardCommand(CMD38, 0)) { + error(SD_CARD_ERROR_ERASE); + goto fail; + } + if (!waitNotBusy(SD_ERASE_TIMEOUT)) { + error(SD_CARD_ERROR_ERASE_TIMEOUT); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Determine if card supports single block erase. + * + * \return The value one, true, is returned if single block erase is supported. + * The value zero, false, is returned if single block erase is not supported. + */ +bool Sd2Card::eraseSingleBlockEnable() { + csd_t csd; + return readCSD(&csd) ? csd.v1.erase_blk_en : false; +} +//------------------------------------------------------------------------------ +/** + * Initialize an SD flash memory card. + * + * \param[in] sckRateID SPI clock rate selector. See setSckRate(). + * \param[in] chipSelectPin SD chip select pin number. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. The reason for failure + * can be determined by calling errorCode() and errorData(). + */ +bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) { + errorCode_ = type_ = 0; + chipSelectPin_ = chipSelectPin; + // 16-bit init start time allows over a minute + uint16_t t0 = (uint16_t)millis(); + uint32_t arg; + + // set pin modes + pinMode(chipSelectPin_, OUTPUT); + chipSelectHigh(); + pinMode(SPI_MISO_PIN, INPUT); + pinMode(SPI_MOSI_PIN, OUTPUT); + pinMode(SPI_SCK_PIN, OUTPUT); + +#ifndef SOFTWARE_SPI + // SS must be in output mode even it is not chip select + pinMode(SS_PIN, OUTPUT); + // set SS high - may be chip select for another SPI device +#if SET_SPI_SS_HIGH + digitalWrite(SS_PIN, HIGH); +#endif // SET_SPI_SS_HIGH + // set SCK rate for initialization commands + spiRate_ = SPI_SD_INIT_RATE; + spiInit(spiRate_); +#endif // SOFTWARE_SPI + + // must supply min of 74 clock cycles with CS high. + for (uint8_t i = 0; i < 10; i++) spiSend(0XFF); + + // command to go idle in SPI mode + while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) { + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_CMD0); + goto fail; + } + } + // check SD version + if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) { + type(SD_CARD_TYPE_SD1); + } else { + // only need last byte of r7 response + for (uint8_t i = 0; i < 4; i++) status_ = spiRec(); + if (status_ != 0XAA) { + error(SD_CARD_ERROR_CMD8); + goto fail; + } + type(SD_CARD_TYPE_SD2); + } + // initialize card and send host supports SDHC if SD2 + arg = type() == SD_CARD_TYPE_SD2 ? 0X40000000 : 0; + + while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) { + // check for timeout + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_ACMD41); + goto fail; + } + } + // if SD2 read OCR register to check for SDHC card + if (type() == SD_CARD_TYPE_SD2) { + if (cardCommand(CMD58, 0)) { + error(SD_CARD_ERROR_CMD58); + goto fail; + } + if ((spiRec() & 0XC0) == 0XC0) type(SD_CARD_TYPE_SDHC); + // discard rest of ocr - contains allowed voltage range + for (uint8_t i = 0; i < 3; i++) spiRec(); + } + chipSelectHigh(); + +#ifndef SOFTWARE_SPI + return setSckRate(sckRateID); +#else // SOFTWARE_SPI + return true; +#endif // SOFTWARE_SPI + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** + * Read a 512 byte block from an SD card. + * + * \param[in] blockNumber Logical block to be read. + * \param[out] dst Pointer to the location that will receive the data. + + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) { + // use address if not SDHC card + if (type()!= SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD17, blockNumber)) { + error(SD_CARD_ERROR_CMD17); + goto fail; + } + return readData(dst, 512); + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Read one data block in a multiple block read sequence + * + * \param[in] dst Pointer to the location for the data to be read. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readData(uint8_t *dst) { + chipSelectLow(); + return readData(dst, 512); +} +//------------------------------------------------------------------------------ +bool Sd2Card::readData(uint8_t* dst, uint16_t count) { + // wait for start block token + uint16_t t0 = millis(); + while ((status_ = spiRec()) == 0XFF) { + if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) { + error(SD_CARD_ERROR_READ_TIMEOUT); + goto fail; + } + } + if (status_ != DATA_START_BLOCK) { + error(SD_CARD_ERROR_READ); + goto fail; + } + // transfer data + spiRead(dst, count); + + // discard CRC + spiRec(); + spiRec(); + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** read CID or CSR register */ +bool Sd2Card::readRegister(uint8_t cmd, void* buf) { + uint8_t* dst = reinterpret_cast(buf); + if (cardCommand(cmd, 0)) { + error(SD_CARD_ERROR_READ_REG); + goto fail; + } + return readData(dst, 16); + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Start a read multiple blocks sequence. + * + * \param[in] blockNumber Address of first block in sequence. + * + * \note This function is used with readData() and readStop() for optimized + * multiple block reads. SPI chipSelect must be low for the entire sequence. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readStart(uint32_t blockNumber) { + if (type()!= SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD18, blockNumber)) { + error(SD_CARD_ERROR_CMD18); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** End a read multiple blocks sequence. + * +* \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readStop() { + chipSelectLow(); + if (cardCommand(CMD12, 0)) { + error(SD_CARD_ERROR_CMD12); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** + * Set the SPI clock rate. + * + * \param[in] sckRateID A value in the range [0, 6]. + * + * The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum + * SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128 + * for \a scsRateID = 6. + * + * \return The value one, true, is returned for success and the value zero, + * false, is returned for an invalid value of \a sckRateID. + */ +bool Sd2Card::setSckRate(uint8_t sckRateID) { + if (sckRateID > 6) { + error(SD_CARD_ERROR_SCK_RATE); + return false; + } + spiRate_ = sckRateID; + return true; +} +//------------------------------------------------------------------------------ +// wait for card to go not busy +bool Sd2Card::waitNotBusy(uint16_t timeoutMillis) { + uint16_t t0 = millis(); + while (spiRec() != 0XFF) { + if (((uint16_t)millis() - t0) >= timeoutMillis) goto fail; + } + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** + * Writes a 512 byte block to an SD card. + * + * \param[in] blockNumber Logical block to be written. + * \param[in] src Pointer to the location of the data to be written. + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) { + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD24, blockNumber)) { + error(SD_CARD_ERROR_CMD24); + goto fail; + } + if (!writeData(DATA_START_BLOCK, src)) goto fail; + + // wait for flash programming to complete + if (!waitNotBusy(SD_WRITE_TIMEOUT)) { + error(SD_CARD_ERROR_WRITE_TIMEOUT); + goto fail; + } + // response is r2 so get and check two bytes for nonzero + if (cardCommand(CMD13, 0) || spiRec()) { + error(SD_CARD_ERROR_WRITE_PROGRAMMING); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Write one data block in a multiple block write sequence + * \param[in] src Pointer to the location of the data to be written. + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeData(const uint8_t* src) { + chipSelectLow(); + // wait for previous write to finish + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + if (!writeData(WRITE_MULTIPLE_TOKEN, src)) goto fail; + chipSelectHigh(); + return true; + + fail: + error(SD_CARD_ERROR_WRITE_MULTIPLE); + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +// send one block of data for write block or write multiple blocks +bool Sd2Card::writeData(uint8_t token, const uint8_t* src) { + spiSendBlock(token, src); + + spiSend(0xff); // dummy crc + spiSend(0xff); // dummy crc + + status_ = spiRec(); + if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) { + error(SD_CARD_ERROR_WRITE); + goto fail; + } + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Start a write multiple blocks sequence. + * + * \param[in] blockNumber Address of first block in sequence. + * \param[in] eraseCount The number of blocks to be pre-erased. + * + * \note This function is used with writeData() and writeStop() + * for optimized multiple block writes. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) { + // send pre-erase count + if (cardAcmd(ACMD23, eraseCount)) { + error(SD_CARD_ERROR_ACMD23); + goto fail; + } + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD25, blockNumber)) { + error(SD_CARD_ERROR_CMD25); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** End a write multiple blocks sequence. + * +* \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeStop() { + chipSelectLow(); + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + spiSend(STOP_TRAN_TOKEN); + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + chipSelectHigh(); + return true; + + fail: + error(SD_CARD_ERROR_STOP_TRAN); + chipSelectHigh(); + return false; } diff --git a/Marlin/SdBaseFile.cpp b/Marlin/SdBaseFile.cpp index dda44ec3c..a485199b3 100644 --- a/Marlin/SdBaseFile.cpp +++ b/Marlin/SdBaseFile.cpp @@ -306,7 +306,7 @@ void SdBaseFile::getpos(fpos_t* pos) { * LS_R - Recursive list of subdirectories. */ void SdBaseFile::ls(uint8_t flags) { - ls(&Serial, flags, 0); + ls(&MSerial, flags, 0); } //------------------------------------------------------------------------------ /** List directory contents. @@ -949,7 +949,7 @@ int SdBaseFile::peek() { */ void SdBaseFile::printDirName(const dir_t& dir, uint8_t width, bool printSlash) { - printDirName(&Serial, dir, width, printSlash); + printDirName(&MSerial, dir, width, printSlash); } //------------------------------------------------------------------------------ /** %Print the name field of a directory entry in 8.3 format. @@ -993,7 +993,7 @@ static void print2u(Print* pr, uint8_t v) { * \param[in] fatDate The date field from a directory entry. */ void SdBaseFile::printFatDate(uint16_t fatDate) { - printFatDate(&Serial, fatDate); + printFatDate(&MSerial, fatDate); } //------------------------------------------------------------------------------ /** %Print a directory date field. @@ -1018,7 +1018,7 @@ void SdBaseFile::printFatDate(Print* pr, uint16_t fatDate) { * \param[in] fatTime The time field from a directory entry. */ void SdBaseFile::printFatTime(uint16_t fatTime) { - printFatTime(&Serial, fatTime); + printFatTime(&MSerial, fatTime); } //------------------------------------------------------------------------------ /** %Print a directory time field. @@ -1044,7 +1044,7 @@ void SdBaseFile::printFatTime(Print* pr, uint16_t fatTime) { bool SdBaseFile::printName() { char name[13]; if (!getFilename(name)) return false; - Serial.print(name); + MSerial.print(name); return true; } //------------------------------------------------------------------------------ diff --git a/Marlin/SdBaseFile.h b/Marlin/SdBaseFile.h index 9363401c9..e02ec3c7a 100644 --- a/Marlin/SdBaseFile.h +++ b/Marlin/SdBaseFile.h @@ -25,7 +25,9 @@ */ #include #if ARDUINO < 100 +#define HardwareSerial_h // trick to disable the standard HWserial #include +#include "MarlinSerial.h" #else // ARDUINO #include #endif // ARDUINO diff --git a/Marlin/SdFatUtil.cpp b/Marlin/SdFatUtil.cpp index 1870980b1..7f82a7083 100644 --- a/Marlin/SdFatUtil.cpp +++ b/Marlin/SdFatUtil.cpp @@ -62,7 +62,7 @@ void SdFatUtil::println_P(Print* pr, PGM_P str) { * \param[in] str Pointer to string stored in flash memory. */ void SdFatUtil::SerialPrint_P(PGM_P str) { - print_P(&Serial, str); + print_P(&MSerial, str); } //------------------------------------------------------------------------------ /** %Print a string in flash memory to Serial followed by a CR/LF. @@ -70,5 +70,5 @@ void SdFatUtil::SerialPrint_P(PGM_P str) { * \param[in] str Pointer to string stored in flash memory. */ void SdFatUtil::SerialPrintln_P(PGM_P str) { - println_P(&Serial, str); + println_P(&MSerial, str); } diff --git a/Marlin/SdFatUtil.h b/Marlin/SdFatUtil.h index b4112aa2d..c49e77df8 100644 --- a/Marlin/SdFatUtil.h +++ b/Marlin/SdFatUtil.h @@ -1,46 +1,48 @@ -/* Arduino SdFat Library - * Copyright (C) 2008 by William Greiman - * - * This file is part of the Arduino SdFat Library - * - * This Library is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This Library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License - * along with the Arduino SdFat Library. If not, see - * . - */ -#ifndef SdFatUtil_h -#define SdFatUtil_h -/** - * \file - * \brief Useful utility functions. - */ -#include -#if ARDUINO < 100 -#include -#else // ARDUINO -#include -#endif // ARDUINO -/** Store and print a string in flash memory.*/ -#define PgmPrint(x) SerialPrint_P(PSTR(x)) -/** Store and print a string in flash memory followed by a CR/LF.*/ -#define PgmPrintln(x) SerialPrintln_P(PSTR(x)) - -namespace SdFatUtil { - int FreeRam(); - void print_P(Print* pr, PGM_P str); - void println_P(Print* pr, PGM_P str); - void SerialPrint_P(PGM_P str); - void SerialPrintln_P(PGM_P str); -} - -using namespace SdFatUtil; // NOLINT +/* Arduino SdFat Library + * Copyright (C) 2008 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#ifndef SdFatUtil_h +#define SdFatUtil_h +/** + * \file + * \brief Useful utility functions. + */ +#include +#if ARDUINO < 100 +#define HardwareSerial_h // trick to disable the standard HWserial +#include +#include "MarlinSerial.h" +#else // ARDUINO +#include +#endif // ARDUINO +/** Store and print a string in flash memory.*/ +#define PgmPrint(x) SerialPrint_P(PSTR(x)) +/** Store and print a string in flash memory followed by a CR/LF.*/ +#define PgmPrintln(x) SerialPrintln_P(PSTR(x)) + +namespace SdFatUtil { + int FreeRam(); + void print_P(Print* pr, PGM_P str); + void println_P(Print* pr, PGM_P str); + void SerialPrint_P(PGM_P str); + void SerialPrintln_P(PGM_P str); +} + +using namespace SdFatUtil; // NOLINT #endif // #define SdFatUtil_h diff --git a/Marlin/motion_control.cpp b/Marlin/motion_control.cpp index ff3f8c2f2..8ecc1a044 100644 --- a/Marlin/motion_control.cpp +++ b/Marlin/motion_control.cpp @@ -27,7 +27,7 @@ // The arc is approximated by generating a huge number of tiny, linear segments. The length of each // segment is configured in settings.mm_per_arc_segment. void mc_arc(float *position, float *target, float *offset, uint8_t axis_0, uint8_t axis_1, - uint8_t axis_linear, float feed_rate, float radius, uint8_t isclockwise) + uint8_t axis_linear, float feed_rate, float radius, uint8_t isclockwise, uint8_t extruder) { // int acceleration_manager_was_enabled = plan_is_acceleration_manager_enabled(); // plan_set_acceleration_manager_enabled(false); // disable acceleration management for the duration of the arc @@ -123,11 +123,11 @@ void mc_arc(float *position, float *target, float *offset, uint8_t axis_0, uint8 arc_target[axis_1] = center_axis1 + r_axis1; arc_target[axis_linear] += linear_per_segment; arc_target[E_AXIS] += extruder_per_segment; - plan_buffer_line(arc_target[X_AXIS], arc_target[Y_AXIS], arc_target[Z_AXIS], arc_target[E_AXIS], feed_rate); + plan_buffer_line(arc_target[X_AXIS], arc_target[Y_AXIS], arc_target[Z_AXIS], arc_target[E_AXIS], feed_rate, extruder); } // Ensure last segment arrives at target location. - plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feed_rate); + plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feed_rate, extruder); // plan_set_acceleration_manager_enabled(acceleration_manager_was_enabled); } diff --git a/Marlin/motion_control.h b/Marlin/motion_control.h index 9bcff4bf4..ca50f8098 100644 --- a/Marlin/motion_control.h +++ b/Marlin/motion_control.h @@ -27,6 +27,6 @@ // the direction of helical travel, radius == circle radius, isclockwise boolean. Used // for vector transformation direction. void mc_arc(float *position, float *target, float *offset, unsigned char axis_0, unsigned char axis_1, - unsigned char axis_linear, float feed_rate, float radius, unsigned char isclockwise); + unsigned char axis_linear, float feed_rate, float radius, unsigned char isclockwise, uint8_t extruder); #endif diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index 0f9b1eb9e..47286983b 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -451,7 +451,7 @@ float junction_deviation = 0.1; // Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in // mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration // calculation the caller must also provide the physical length of the line in millimeters. -void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate) +void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder) { // Calculate the buffer head after we push this byte int next_buffer_head = next_block_index(block_buffer_head); @@ -527,12 +527,12 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa else { if(feed_rate 1) feed_rate = feed_rate*moves_queued / (BLOCK_BUFFER_SIZE * 0.5); #endif /* diff --git a/Marlin/planner.h b/Marlin/planner.h index 57c59a0b0..8ef8fec17 100644 --- a/Marlin/planner.h +++ b/Marlin/planner.h @@ -66,7 +66,7 @@ void plan_init(); // Add a new linear movement to the buffer. x, y and z is the signed, absolute target position in // millimaters. Feed rate specifies the speed of the motion. -void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate); +void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder); // Set position. Used for G92 instructions. void plan_set_position(const float &x, const float &y, const float &z, const float &e); diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 491b6e7f2..34c7153c6 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -52,7 +52,7 @@ static long counter_x, // Counter variables for the bresenham line tracer counter_y, counter_z, counter_e; -static unsigned long step_events_completed; // The number of step events executed in the current block +volatile static unsigned long step_events_completed; // The number of step events executed in the current block #ifdef ADVANCE static long advance_rate, advance, final_advance = 0; static short old_advance = 0; @@ -63,6 +63,7 @@ static long acceleration_time, deceleration_time; //static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate; static unsigned short acc_step_rate; // needed for deccelaration start point static char step_loops; +static unsigned short OCR1A_nominal; volatile long endstops_trigsteps[3]={0,0,0}; volatile long endstops_stepsTotal,endstops_stepsDone; @@ -77,10 +78,6 @@ static bool old_y_max_endstop=false; static bool old_z_min_endstop=false; static bool old_z_max_endstop=false; -static bool busy_error=false; -unsigned short OCR1A_error=12345; -unsigned short OCR1A_nominal; - volatile long count_position[NUM_AXIS] = { 0, 0, 0, 0}; volatile char count_direction[NUM_AXIS] = { 1, 1, 1, 1}; @@ -164,15 +161,6 @@ asm volatile ( \ #define ENABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 |= (1<>3); } - if(timer < 100) { timer = 100; Serial.print("Steprate to high : "); Serial.println(step_rate); }//(20kHz this should never happen) + if(timer < 100) { timer = 100; MSerial.print("Steprate to high : "); MSerial.println(step_rate); }//(20kHz this should never happen) return timer; } @@ -277,17 +265,7 @@ inline void trapezoid_generator_reset() { // "The Stepper Driver Interrupt" - This timer interrupt is the workhorse. // It pops blocks from the block_buffer and executes them by pulsing the stepper pins appropriately. ISR(TIMER1_COMPA_vect) -{ - if(busy){ - OCR1A_error = OCR1A; - busy_error = true; - OCR1A = 30000; - return; - } // The busy-flag is used to avoid reentering this interrupt - - busy = true; - sei(); // Re enable interrupts (normally disabled while inside an interrupt handler) - +{ // If there is no current block, attempt to pop one from the buffer if (current_block == NULL) { // Anything in the buffer? @@ -304,7 +282,7 @@ ISR(TIMER1_COMPA_vect) // #endif } else { -// DISABLE_STEPPER_DRIVER_INTERRUPT(); + OCR1A=2000; // 1kHz. } } @@ -404,8 +382,8 @@ ISR(TIMER1_COMPA_vect) count_direction[E_AXIS]=-1; } #endif //!ADVANCE - for(int8_t i=0; i < step_loops; i++) { // Take multiple steps per interrupt (For high speed moves) + MSerial.checkRx(); /* counter_e += current_block->steps_e; if (counter_e > 0) { @@ -470,6 +448,7 @@ ISR(TIMER1_COMPA_vect) unsigned short timer; unsigned short step_rate; if (step_events_completed <= current_block->accelerate_until) { + MultiU24X24toH16(acc_step_rate, acceleration_time, current_block->acceleration_rate); acc_step_rate += current_block->initial_rate; @@ -519,8 +498,6 @@ ISR(TIMER1_COMPA_vect) plan_discard_current_block(); } } - cli(); // disable interrupts - busy=false; } #ifdef ADVANCE