diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index e291db87f..41fd8b4c5 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index dabe5ead0..6ca71feaf 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index a954e43ae..da00af9d1 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index 940acf766..c70126d8e 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
index 52c3a872f..bc66b0081 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index 554a6b02b..6bb601c37 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -544,8 +544,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h
index 69043cd68..5a35ec003 100644
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index a8fd1940d..1d28e9c60 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 97684b06c..842a7ef59 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index e81b9e237..a9d1b60c0 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -539,8 +539,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index 940acf766..c70126d8e 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
index 9e83512ee..f203817fb 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@@ -533,8 +533,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index ae111f409..447fe136a 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -533,8 +533,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index ae111f409..447fe136a 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -533,8 +533,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index aa4825980..908d04885 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -538,8 +538,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 909a5bc04..a501e1273 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -533,8 +533,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index e68116b19..ec97b4a40 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 27dccc0fe..841ff0c26 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -531,8 +531,9 @@
 #if ENABLED(ENSURE_SMOOTH_MOVES)
   //#define ALWAYS_ALLOW_MENU      // If enabled, the menu will always be responsive.
                                    // WARNING: Menu navigation during short moves may cause stuttering!
-  #define LCD_UPDATE_THRESHOLD 170 // (ms) Minimum duration for the current segment to allow an LCD update.
+  #define LCD_UPDATE_THRESHOLD 135 // (ms) Minimum duration for the current segment to allow an LCD update.
                                    // Default value is good for graphical LCDs (e.g., REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER).
+                                   // You may try to lower this value until you printer starts stuttering again as if ENSURE_SMOOTH_MOVES is disabled.
   #define MIN_BLOCK_TIME 6         // (ms) Minimum duration of a single block. You shouldn't need to modify this.
 #endif