From 99692dc99e550932edea74bf5c8fdaf295aa8bed Mon Sep 17 00:00:00 2001
From: Robert F-C <rfc@exemail.com.au>
Date: Wed, 7 Nov 2012 09:00:21 +1100
Subject: [PATCH 1/2] Clean up special serial port cases

Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register
special case. Clarify comments.
---
 Marlin/MarlinSerial.h | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/Marlin/MarlinSerial.h b/Marlin/MarlinSerial.h
index 39731bdd3..a48ffbe50 100644
--- a/Marlin/MarlinSerial.h
+++ b/Marlin/MarlinSerial.h
@@ -24,7 +24,7 @@
 #include "Marlin.h"
 
 #if !defined(SERIAL_PORT) 
-#error SERIAL_PORT not set 
+#define SERIAL_PORT 0
 #endif
 
 // The presence of the UBRRH register is used to detect a UART.
@@ -35,29 +35,21 @@
 // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
 // requires two levels of indirection to expand macro values properly)
 #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
-#if SERIAL_PORT == 0 && !defined(UBRR0H)
+#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
 #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
-#else
+#else
 #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
-#endif
+#endif
 
 // Registers used by MarlinSerial class (these are expanded 
 // depending on selected serial port
-#define M_UCSRxA SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRxA where x is the serial port number
+#define M_UCSRxA SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number
 #define M_UCSRxB SERIAL_REGNAME(UCSR,SERIAL_PORT,B) 
 #define M_RXENx SERIAL_REGNAME(RXEN,SERIAL_PORT,)    
 #define M_TXENx SERIAL_REGNAME(TXEN,SERIAL_PORT,)    
 #define M_RXCIEx SERIAL_REGNAME(RXCIE,SERIAL_PORT,)    
 #define M_UDREx SERIAL_REGNAME(UDRE,SERIAL_PORT,)    
-#if SERIAL_PORT == 0 && !defined(UDR0)
-  #if defined(UDR)
-    #define M_UDRx UDR  //  atmega8, atmega32
-  #else
-    #error UDR not defined
-  #endif
-#else
-  #define M_UDRx SERIAL_REGNAME(UDR,SERIAL_PORT,) 
-#endif  
+#define M_UDRx SERIAL_REGNAME(UDR,SERIAL_PORT,)  
 #define M_UBRRxH SERIAL_REGNAME(UBRR,SERIAL_PORT,H)
 #define M_UBRRxL SERIAL_REGNAME(UBRR,SERIAL_PORT,L)
 #define M_RXCx SERIAL_REGNAME(RXC,SERIAL_PORT,)
@@ -189,4 +181,4 @@ class MarlinSerial //: public Stream
 extern MarlinSerial MSerial;
 #endif // ! teensylu
 
-#endif
+#endif

From 08337e01f7e455aadc54f65d1b0ca1c12090493a Mon Sep 17 00:00:00 2001
From: Robert F-C <rfc@exemail.com.au>
Date: Wed, 7 Nov 2012 17:28:46 +1100
Subject: [PATCH 2/2] Added change to feature list.

---
 README.md | 1 +
 1 file changed, 1 insertion(+)

diff --git a/README.md b/README.md
index fb2c18968..bbc501e42 100644
--- a/README.md
+++ b/README.md
@@ -45,6 +45,7 @@ Features:
 *   Heater power reporting. Useful for PID monitoring.
 *   PID tuning
 *   CoreXY kinematics (www.corexy.com/theory.html)
+*   Configurable serial port to support connection of wireless adaptors.
 
 The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments.