diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h
index 25c5aca63..af3f517c8 100644
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@@ -186,6 +186,8 @@ extern float add_homeing[3];
 extern float min_pos[3];
 extern float max_pos[3];
 extern int fanSpeed;
+extern int ValvePressure;
+extern int EtoPPressure;
 
 #ifdef FWRETRACT
 extern bool autoretract_enabled;
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 9f2ba7be1..3d966bf1d 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -101,6 +101,10 @@
 // M115	- Capabilities string
 // M117 - display message
 // M119 - Output Endstop status to serial port
+// M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
+// M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
+// M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
+// M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
 // M140 - Set bed target temp
 // M190 - Wait for bed current temp to reach target temp.
 // M200 - Set filament diameter
@@ -168,6 +172,8 @@ float extruder_offset[2][EXTRUDERS] = {
 #endif
 uint8_t active_extruder = 0;
 int fanSpeed=0;
+int ValvePressure=0;
+int EtoPPressure=0;
 
 #ifdef FWRETRACT
   bool autoretract_enabled=true;
@@ -1169,6 +1175,37 @@ void process_commands()
         break;
     #endif //FAN_PIN
 
+	// PWM for HEATER_1_PIN
+    #if HEATER_1_PIN > -1
+      case 126: //M126 valve open
+        if (code_seen('S')){
+           ValvePressure=constrain(code_value(),0,255);
+        }
+        else {
+          ValvePressure=255;			
+        }
+        break;
+      case 127: //M127 valve closed
+        ValvePressure = 0;
+        break;
+    #endif //HEATER_1_PIN
+
+	// PWM for HEATER_2_PIN
+    #if HEATER_2_PIN > -1
+      case 128: //M128 valve open
+        if (code_seen('S')){
+           EtoPPressure=constrain(code_value(),0,255);
+        }
+        else {
+          EtoPPressure=255;			
+        }
+        break;
+      case 129: //M129 valve closed
+        EtoPPressure = 0;
+        break;
+    #endif //HEATER_2_PIN
+
+
     #if (PS_ON_PIN > -1)
       case 80: // M80 - ATX Power On
         SET_OUTPUT(PS_ON_PIN); //GND
diff --git a/Marlin/pins.h b/Marlin/pins.h
index 952fa7a9a..ac25dea4c 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -1474,7 +1474,7 @@
 #define HEATER_1_PIN 7
 #define TEMP_1_PIN 1
 
-#define HEATER_2_PIN -1
+#define HEATER_2_PIN 6
 #define TEMP_2_PIN -1
 
 #define E0_STEP_PIN         34
diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp
index 854fd19ee..f7473c602 100644
--- a/Marlin/planner.cpp
+++ b/Marlin/planner.cpp
@@ -439,12 +439,18 @@ void check_axes_activity()
   unsigned char z_active = 0;
   unsigned char e_active = 0;
   unsigned char tail_fan_speed = fanSpeed;
+  unsigned char valve_pressure = 0;
+  unsigned char e_to_p_pressure = 0;
+  unsigned char tail_valve_pressure = 0;
+  unsigned char tail_e_to_p_pressure = 0;
   block_t *block;
 
   if(block_buffer_tail != block_buffer_head)
   {
     uint8_t block_index = block_buffer_tail;
     tail_fan_speed = block_buffer[block_index].fan_speed;
+    tail_valve_pressure = block_buffer[block_index].valve_pressure;
+    tail_e_to_p_pressure = block_buffer[block_index].e_to_p_pressure;
     while(block_index != block_buffer_head)
     {
       block = &block_buffer[block_index];
@@ -486,6 +492,17 @@ void check_axes_activity()
 #ifdef AUTOTEMP
   getHighESpeed();
 #endif
+
+#if HEATER_1_PIN > -1
+    if (ValvePressure != 0){
+      analogWrite(HEATER_1_PIN,ValvePressure); // If buffer is empty use current fan speed
+    }
+#endif
+#if HEATER_2_PIN > -1
+    if (EtoPPressure != 0){
+      analogWrite(HEATER_2_PIN,EtoPPressure); // If buffer is empty use current fan speed
+    }
+#endif
 }
 
 
@@ -559,6 +576,8 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
   }
 
   block->fan_speed = fanSpeed;
+  block->valve_pressure = ValvePressure;
+  block->e_to_p_pressure = EtoPPressure;
 
   // Compute direction bits for this block 
   block->direction_bits = 0;
diff --git a/Marlin/planner.h b/Marlin/planner.h
index 9a904e577..4af72a475 100644
--- a/Marlin/planner.h
+++ b/Marlin/planner.h
@@ -60,6 +60,8 @@ typedef struct {
   unsigned long final_rate;                          // The minimal rate at exit
   unsigned long acceleration_st;                     // acceleration steps/sec^2
   unsigned long fan_speed;
+  unsigned long valve_pressure;
+  unsigned long e_to_p_pressure;
   volatile char busy;
 } block_t;