26a40373fc
Adjustments to blocking moves
7 years ago
6b9e7defac
M211 output in current workspace
7 years ago
737cee4b8c
Syntax tweaks
7 years ago
2060ba3556
M290 report on change, P0 to leave Probe Z Offset unchanged
7 years ago
e56ead5e1c
Followup to G33 patch
7 years ago
8b9e68c32d
[1.1.x] G33 probe error handing
7 years ago
b2d3fffe74
Patches for M290, M851
7 years ago
ecf19344f6
Initialize mixing virtual tools to behave like standard a multi-extruder setup ( #6853 )
...
* Initialize mixing virtual tools to behave like standard a multi-extruder setup
* Update Marlin_main.cpp
* Update Marlin_main.cpp
7 years ago
adee17847c
Fix #8540
...
Does it?
7 years ago
f8e30f49d7
Add NanoDLP Z movement synchronization option
...
Implemented synchronization message output for NanoDLP printers (nanodlp.com).
If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.
7 years ago
8282d732c1
Make G26 work with all mesh leveling.
...
Example Configuration.h files are not updated yet. You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory. (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
7 years ago
ed6a5ff7e5
Merge pull request #8524 from GMagician/1.1.x-tool-change-bad-behaviour-fix
...
[1.1.x] Tool change bad behaviour fix
7 years ago
99b71c1dde
Move lcd_map_control to UBL
...
For parity with bugfix-2.0.x
7 years ago
73ddc762c8
Fix up LCD init / charset
7 years ago
7a5b3a1e6a
[1.1.x] Tool change bad behaviour fix
...
Just aligned with version 2.0. Here bug was not present
7 years ago
e2568d7589
Fix delta_safe_distance_from_top
7 years ago
0b1d754e7d
Fix G42
7 years ago
bbc2ee6da1
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
7 years ago
b96ceb4256
[1.1.x] tool change bad behaviours
...
This PR will address two issues reported in #8492 . Just one is left because I don't know if it is an issue or not
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
7 years ago
12b018e619
Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x
...
[1.1.x] M43 end pin correction/compatibility
7 years ago
9b80e1e04a
change to L for end pin for M43 Toggle command
7 years ago
bf6a1816b4
Display volumetric ratio in terms of E mm
7 years ago
622d100c30
No retroactive changes with M851 Z
7 years ago
97c19de8b9
Fix PlatformIO dependencies
7 years ago
4e19c59ab3
Miscellaneous cleanup
7 years ago
d3b8f30818
Fix M32 P subroutine handling
7 years ago
95590adf07
Make sure `leveled[]` is enabled for use
7 years ago
90c7d28055
Extrudrboard support for Printrboard Rev.F
7 years ago
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x
...
[1.1.x] Fix M428
7 years ago
d2df00bfca
[1.1.x] Fix compilation warnings ( #8395 )
...
* Fix up Travis CI and compile warnings/errors
* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER
* No point in setting all the endstop plugs
7 years ago
25ec0fecfa
Apply native workspace fixes to G92, G53-59
7 years ago
227b96b28b
Fix M428
...
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
7 years ago
aa616cd410
No leveling data in M114 without leveling
7 years ago
5926159890
Fix report_current_position
...
Thanks @RowanMeara!
7 years ago
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup
...
[1.1] Remove offsets from soft endstops, tool change
7 years ago
355dfed437
Coding standard patch of M290
7 years ago
802ae73b13
Turn off laser power pin when PWM goes to 0
7 years ago
549c814e8d
Remove offsets from soft endstops, tool change
7 years ago
564fbc8dec
M290 constrain patch
7 years ago
df44bcc5ae
Use do_blocking_move_to where possible
7 years ago
3293823642
Add pre-calculated planner.e_factor
7 years ago
24b302c001
Fix cold/lengthy extrusion handling
7 years ago
4714fb8fcb
Normalize load/unload length in M600
7 years ago
b0ff3a4c6d
Cleanup around updatePID
7 years ago
8ce9306b27
PROBE_SELECTED etc.
7 years ago
b6b4bf0959
Merge pull request #8345 from tcm0116/1.1.x-delta_height
...
[1.1.x] Add delta_height variable in lieu of using home_offset
7 years ago
658e1ebe5a
Add delta_height variable in lieu of using home_offset
7 years ago
54963cc898
Fix _manual_goto_xy on kinematic systems
7 years ago
ad879a1f90
Clarify some motion code
7 years ago
2559745f54
Tweaks to core motion code
7 years ago
Scott Lahteine