mfeherpataky
71ddb8dc60
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Use all available characters in narrow LCDs < 20 characters.
12 years ago
mfeherpataky
d2c547c407
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
12 years ago
Bernhard Kubicek
f8876a7958
Merge pull request #376 from kintel/skip_longfilenames
...
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
12 years ago
daid
18fcc367d2
Merge pull request #371 from Banjer/Melzi_LED_PIN
...
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
12 years ago
Bas Spaans
19ce90fe02
Added comment about M42 usage (clean)
12 years ago
Bas Spaans
00fed0a703
Revert "Extended comment explaining M42 usage"
...
This reverts commit 01541ee64c
.
12 years ago
Marius Kintel
e06d820909
Also skip .files and _files with long filenames
12 years ago
Bas Spaans
01541ee64c
Extended comment explaining M42 usage
12 years ago
Marius Kintel
f24f02e212
compile fix: quickStop() needs stepper.h
12 years ago
Bas Spaans
12c41423ad
Fixed typo in comment
12 years ago
Bas Spaans
0995eaa492
Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
12 years ago
Bernhard
1d06b10962
Added a feature to have filament change by gcode or display trigger.
...
[default off for now]
syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.
You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
12 years ago
daid303
408b349a84
Fixed #368 . Commented out the wrong pin definition, but explained why it is there.
12 years ago
Daniele Sdei
9ecb267b63
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
Daniele Sdei
3cf59f6f9a
add RepRapPro Huxley thermistor tables
12 years ago
daid
c1730e2b08
Merge pull request #363 from yuroller/sanguino_panelolu
...
Panelolu pin assignment for sanguinololu
12 years ago
Yuri Valentini
86358dd6cd
Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu
12 years ago
daid303
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
12 years ago
daid
6ec56fa923
Merge pull request #334 from KevinOConnor/FanKick
...
Add feature to briefly run the cooling fan at full speed when it first starts.
12 years ago
daid
965baf2683
Merge pull request #362 from daid/Marlin_v1
...
Finnish language
12 years ago
Kevin O'Connor
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
...
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
12 years ago
Kevin O'Connor
3f2f94ef28
Be consistent in setting of the fan PWM.
...
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
12 years ago
Henry Palonen
7f30039d2a
+ Finnish translation
12 years ago
daid303
14e1d495ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
daid303
bbe7d3d0fe
Fixed #312
12 years ago
daid
7ce509b9a7
Merge pull request #361 from yuroller/MakefileSanguino
...
Makefile sanguino
12 years ago
Yuri Valentini
9c34c4f05b
fixes for ramps compilation using installed arduino ide
12 years ago
daid303
442ade15a6
Move Gen6 stuff into a proper location.
12 years ago
daid
5fd4582cc8
Merge pull request #242 from Drakelive/Marlin_v1
...
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
12 years ago
daid303
8b88e3b386
Fixed #345 , Fixed #267 .
12 years ago
daid
27843388c6
Merge pull request #360 from njprossi/Marlin_v1
...
Power signal control definitions for other power supplies
12 years ago
daid303
921273baa0
Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
12 years ago
Yuri Valentini
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
12 years ago
Nicolas Rossi
437eb3bafc
Initialize PS_ON at startup
12 years ago
Nicolas Rossi
f3c1fc70a9
Power signal control definitions for ATX and others
12 years ago
Yuri Valentini
dad7691df9
makefile for sanguino standalone compilation
12 years ago
Daniele Sdei
5f82f03ff3
Add italian MSG_RESUMING.
12 years ago
daid303
5e3873c8db
Add german MSG_RESUMING.
12 years ago
daid303
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
12 years ago
daid303
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
12 years ago
daid
30254e3388
Merge pull request #350 from jcrocholl/Marlin_v1
...
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
12 years ago
daid303
38ee395ac7
Replace the 1ms delay for 2 nops to get a 100ns delay. #259
12 years ago
daid303
5df5e4c4a2
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
daid303
a95dcd74e7
Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
12 years ago
Johann Rocholl
8caf5d252d
Remove bogus blank line.
12 years ago
Johann Rocholl
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
12 years ago
oni303
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
12 years ago
Sergey Taranenko
5697451c72
fix lcd class
12 years ago
Sergey Taranenko
58e806f3fa
Fix the russial translation.
12 years ago
Sergey Taranenko
50a5ce1dc4
deduplicate messages
12 years ago