df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
7 years ago
4be8d7720e
Fix spelling of "Chinese"
7 years ago
760bf49a00
Merge pull request #7221 from thinkyhead/bf_fix_reachable
...
Fix for issues #6997 and #7152
7 years ago
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
7 years ago
57fff2e95e
Merge pull request #7219 from thinkyhead/bf_update_git_scripts
...
Update Marlin+git helper scripts
7 years ago
94c965fad6
Merge pull request #7220 from thinkyhead/bf_fix_eeprom_opts
...
Make all EEPROM optimization options available
7 years ago
6a3967ee33
Corrections for probe_pt parameters
7 years ago
534bffa7a9
Correct comment on ABL G29
7 years ago
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
7 years ago
ab79933d1f
Update Marlin+Github helper scripts
7 years ago
69297b2d7b
Make all EEPROM optimization options available
8 years ago
015839fc50
Merge pull request #7212 from thinkyhead/bf_m48_real_probe
...
M48 needs a real probe
8 years ago
d609489b22
Drop setup_homepin
8 years ago
167169e1bf
Sanity check for a real probe with M48
8 years ago
395a9f59ac
Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen
...
Use lcd_bootscreen for both
8 years ago
14663efe0d
Merge pull request #7210 from fiveangle/printrboard_revf_cleanup
...
Printrboard RevF cleanup
8 years ago
ae5923a3d0
Make lcd_bootscreen common to both
8 years ago
859248433f
Patch for gcode debug
8 years ago
09c90c2f6c
Printrboard RevF Cleanup
...
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
8 years ago
41e0955c27
Merge pull request #7208 from thinkyhead/bf_lcd_for_melzi
...
LCD for Melzi support
8 years ago
232a10410d
LCD_FOR_MELZI
8 years ago
76c92a1fab
Clean up some trailing spaces
8 years ago
312f63dbe8
Merge pull request #7207 from thinkyhead/bf_update_ubl_lcd
...
Expose DISABLE_M503 option as a test option
8 years ago
cf96109056
Implement the EEPROM_CHITCHAT option
8 years ago
dcec7178d1
Expose DISABLE_M503 option as a test option
8 years ago
3e78a01262
Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
...
UBL radar map corrections
8 years ago
2ff967f3e6
Merge pull request #7205 from thinkyhead/bf_infitary_m508
...
Add configuration for Infitary M508 (i3 clone)
8 years ago
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
...
Based on Infitary's own firmware settings.
8 years ago
4cb45c10dd
Patch ubl lcd mesh map indentation
8 years ago
abd6ba62b4
Some cleanups for ubl lcd mesh map
8 years ago
f17bae1f70
Changes for ubl_lcd_map_control patch
8 years ago
8e0f3b7eba
UBL radar map corrections
8 years ago
009a6104c5
Merge pull request #7201 from Bob-the-Kuhn/intermittent_Teensy2++_G26_compile_issue
...
intermittent AT90USB & G26 compile problem (proposal)
8 years ago
fcceed5be6
intermittent Teensy & G26 compile problem
...
===============================================
also an issue with ubl_motion.cpp
8 years ago
457489d7ac
Merge pull request #7187 from thinkyhead/bf_sanitycheck_G33
...
Add a sanity check for DELTA_AUTO_CALIBRATION
8 years ago
30b327d24c
Finish the solution for #7166
8 years ago
6c97c5595c
Add a sanity check for DELTA_AUTO_CALIBRATION
8 years ago
553d5ca283
Merge pull request #7183 from Bob-the-Kuhn/Fix_LETTER_OFF_in_gcode.h
...
Fix LETTER_OFF in gcode.h (make LETTTER_OFF return values that match param indices range)
8 years ago
e6e3132f79
make LETTTER_OFF return values that match param indices range
8 years ago
cd2ac3b759
Merge pull request #7182 from Bob-the-Kuhn/has__value_fix_
...
Correct has_value() when FASTER_GCODE_PARSER is enabled
8 years ago
bfbf5f8200
correct value_bool() when FASTER_GCODE_PARSER is enabled
...
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
8 years ago
814925d692
Merge pull request #7179 from thinkyhead/bf_anet_a6
...
Add ANET A6 example configuration
8 years ago
406ef69702
Move Anet A8 config to subfolder
8 years ago
379926961c
Add Anet A6 config, edit Anet A8 config
8 years ago
5b03f23fa2
Bring configurations up to date, fix some comments
8 years ago
e3cedfa0ec
Fix a compiler warning
8 years ago
bb0508b6cf
Fix comment in M115 code
8 years ago
5c1888467f
Merge pull request #7170 from thinkyhead/bf_M217_echo_to_serial
...
Add A (action) and E (echo) parameters to M118
8 years ago
85777a56c6
Add A (action) and E (echo) parameters to M118
8 years ago
d1e8d4cd9d
Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
...
UBL Map Cleanup and LCD display
8 years ago
Scott Lahteine