Scott Lahteine
58cfcd4239
Overridable Options - Part 5
...
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
9 years ago
Scott Lahteine
32683b282b
Include configurator copies of configs
9 years ago
Scott Lahteine
edaaead7e0
Fix comment about SERVO_ENDSTOP_ANGLES
9 years ago
Scott Lahteine
0af2a80e06
Make SERVO_ENDSTOP_ANGLES 2-dimensional
9 years ago
Richard Wackerbarth
525d0dc239
Configurator is out-of-date AGAIN (PR#2550)
9 years ago
Scott Lahteine
ab6f1fdf8b
Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528)
...
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
9 years ago
AnHardt
fd0e81b0c7
Distinguish between BUZZER and SPEAKER (PR#2513)
...
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.
There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker
* replace the PWM based tone()-function again with a on-delay-off-delay loop.
Hopefully the last time I touch the beeper code.
9 years ago
AnHardt
8b876241bd
Some more servo code tweaks
...
Just set up the pin. Don't move to a random position.
Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.
SERVO_LEVELING is the wrong condition to deactivate the servos.
Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
9 years ago
Scott Lahteine
90f8ddfc1e
Apply MINIPANEL to other configs
9 years ago
Scott Lahteine
d85861d296
Move macros, add ENABLED/DISABLED, add includes
9 years ago
Scott Lahteine
129f986ccf
Add COREXZ option to configurations
9 years ago
Scott Lahteine
de25a48dec
Remove PID examples from preconfigured configs
9 years ago
Scott Lahteine
7456710a1f
Update configs formatting
9 years ago
Scott Lahteine
391386dd94
Update configs for new servo deactivation
9 years ago
Scott Lahteine
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
9 years ago
Scott Lahteine
d78ebbc0e9
Remove unused MSG_OK_B and MSG_OK_T
9 years ago
Scott Lahteine
4ce9ddbb74
Check the temperature before filament change
9 years ago
AnHardt
c461975140
Rename and repair MELZI_1284 (PR#2301)
...
to MELZI_MAKR3D.
Fix for #2288
As the normal MELZI also can have a 1284.
9 years ago
Scott Lahteine
dc40a5f6e0
Patch up more outdated config lines
9 years ago
Scott Lahteine
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
9 years ago
Scott Lahteine
d3bce05d54
Fix up spacing for filament sensor values
9 years ago
Scott Lahteine
b4b10a57fe
Fix configurator section directives and values lists
9 years ago
Scott Lahteine
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
9 years ago
wurstnase
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
9 years ago
AnHardt
d1f4471000
Merge pull request #2146 from Wackerbarth/Versioning
...
Versioning
9 years ago
Scott Lahteine
06f401e7e5
Redo "invalid extruder" to save 264 bytes
...
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
9 years ago
Richard Wackerbarth
b5743d6927
Use SOURCE_CODE_URL rather than FIRMWARE_URL
9 years ago
Richard Wackerbarth
5ea139fd79
Revised Versioning mechanism
9 years ago
Scott Lahteine
38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
9 years ago
Scott Lahteine
81c2ca3e10
Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb
...
Witbox and Hephestos are RAMPS EFB
9 years ago
Scott Lahteine
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
9 years ago
Scott Lahteine
6eb4f90ce7
Also synchronize configurator copies of configs
9 years ago
AnHardt
9b8c6ed254
Merge pull request #2120 from chris-bo/dogm_config
...
move dogm font selection to configuration_adv.h
9 years ago
AnHardt
06513565e9
Merge pull request #2105 from eboston/Development
...
Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.
9 years ago
Ed Boston
082ed3beed
Propagate Configuration.h changes
...
Updated all the example Configuration.h files for the new display type.
10 years ago
Scott Lahteine
7bc5fd8193
Merge pull request #2123 from AnHardt/Duemilanove
...
Remove Duemilanove
10 years ago
AnHardt
4d4fa3607b
Remove Duemilanove
...
No way to fit Marlin into 32K.
10 years ago
AnHardt
e353d27430
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian
10 years ago
Christian Bohn
258bcdefe0
move dogm font selection to configuration_adv.h
10 years ago
AnHardt
7750180c93
transpire -> expire
...
Minor wording correction.
10 years ago
Scott Lahteine
0f2c9bacfd
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
Scott Lahteine
76438195f0
NO_TIMEOUTS and ADVANCED_OK off by default
10 years ago
Scott Lahteine
78beef2d73
Use Mendel default for INVERT_Y_DIR
10 years ago
Scott Lahteine
d693e0f378
Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit
10 years ago
Scott Lahteine
747fd5801c
Merge pull request #2055 from thinkyhead/thermal_unified
...
Combine thermal runaway and watch-period
10 years ago
Scott Lahteine
429c6ccad2
Neaten config formatting
10 years ago
Scott Lahteine
8a0dc4d54a
Merge pull request #1922 from Wurstnase/serial_wait
...
Serial wait
10 years ago
Wurstnase
526ad82d20
activate advanced_ok and no_timeout
10 years ago
Scott Lahteine
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
10 years ago
Scott Lahteine
79106638a8
Fix documentation of heating sanity check
10 years ago