c8e5a82d49
keep English as default lang.
11 years ago
f64592e362
Add Aragonese translation
11 years ago
ac74f45dc0
Merge pull request #752 from MatixYo/patch-3
...
Update language.h
11 years ago
36086d3ca4
Update language.h
...
Updated Polish translations.
11 years ago
d485988bec
fix typo
11 years ago
8a1fd25363
Default is to not define digipot_i2c
11 years ago
5097c57d3a
Added pins for Azteeg X3 Pro under motherboard 68
11 years ago
b819fc53ca
Add Azteeg X3 Pro as motherboard 68
...
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
11 years ago
e1ae7952eb
Merge pull request #743 from Opticalworm/Marlin_v1
...
Improved support for panelolu2 encoder and buzzer
11 years ago
a5f53f0cf3
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
11 years ago
8d162e5bd7
Improved support for panelolu2 encoder and buzzer
...
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default
buzzer sound.
When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS
When selecting the sanguinololu 1284p the following is true:
- its now enables LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
11 years ago
b2c11ba980
Change diameter code to 'D'
...
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.
Also some minor code improvements to M200.
11 years ago
61059385a3
Merge pull request #737 from whosawhatsis/M200
...
M200 implementation
11 years ago
856edfcc0d
Fixed math
...
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
11 years ago
0d81ae77bc
Merge pull request #727 from drf5n/oversampling
...
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
11 years ago
84df13f7d1
Merge pull request #721 from drf5n/lcdOnly
...
Enable basic ULTRA_LCD screen w/o encoders and menus.
11 years ago
4c7e9502ad
Merge pull request #718 from drf5n/temptableRes
...
createTemperatureLookupMarlin.py: Add resolution comments and format for...
11 years ago
652a0f6b5a
Merge pull request #717 from drf5n/tpins2
...
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
11 years ago
96a0cdc541
Merge pull request #716 from drf5n/maketeensy
...
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
11 years ago
d24df7af2c
M200 implementation
11 years ago
f0b8d5ba3d
createTemperatureLookupMarlin.py: Change comment to refer to actual program name.
11 years ago
50f44d9249
createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution.
11 years ago
f5b5dd8038
createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients.
11 years ago
76cf07c3f7
Configuration.h: Use OVERSAMPLENR in dT_PID definition.
11 years ago
476c7193d8
temperature.cpp: Use OVERSAMPLENR in oversampling calculation.
11 years ago
f08bb8bb6a
Previous commit borked.
11 years ago
b1f8f492c6
Remove previous_millis_cmd update from extruder runout prevention code
...
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
11 years ago
8a5eaa3c9b
Fix crash after home bug
...
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
11 years ago
61a7256d42
Enable basic ULTRA_LCD screen w/o encoders and menus.
11 years ago
fdac8f6cec
Update ConfigurationStore.cpp
...
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
11 years ago
05932e4458
Add Z Probe Offset to EEPROM and Ultra LCD
11 years ago
7216583b8b
createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin.
11 years ago
e8e0697e48
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility.
11 years ago
75f39fadfc
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84})
11 years ago
df194f75e1
Added PT100 support for Ultiboard2
11 years ago
380144c20f
Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original.
11 years ago
6ae7f7870d
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
11 years ago
ce8b9c4fc5
Correct missing parameter from last upmerge
...
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
11 years ago
8e48e24c7f
Update Delta example files
...
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
11 years ago
46d2443c7d
Merge pull request #676 from IVI053/Marlin_v1
...
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
11 years ago
eed053dffb
Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs"
...
This reverts commit b7eadb9f37
11 years ago
8349fc89a4
Fixed planner bug
11 years ago
da2a6f9a31
Accurate bed leveling: x loop inside y and zigzag motion
11 years ago
d29615dc0c
Z and Y dual stepper drivers error
...
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware
to solve this problem i change this line:
#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS
to:
#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)
now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
11 years ago
5bde7fcb28
Minor code and comment polishing
11 years ago
20faff5935
Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry
11 years ago
e5d3044801
Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability
11 years ago
b7eadb9f37
Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs
11 years ago
e8786bf110
Added support for Cheaptronic v1 electronic
11 years ago
cc2925b705
Implemented a least squares fit of the bed equation for auto bed leveling.
...
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
11 years ago
Daniel Martinez