/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** MarlinSerial.h - Hardware serial library for Wiring Copyright (c) 2006 Nicholas Zambetti. All right reserved. Modified 28 September 2010 by Mark Sproul Modified 14 February 2016 by Andreas Hardtung (added tx buffer) */ #ifndef MARLINSERIAL_H #define MARLINSERIAL_H #include "MarlinConfig.h" #ifndef SERIAL_PORT #define SERIAL_PORT 0 #endif // The presence of the UBRRH register is used to detect a UART. #define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \ (port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \ (port == 3 && defined(UBRR3H))) // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor // requires two levels of indirection to expand macro values properly) #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix #else #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix #endif // Registers used by MarlinSerial class (expanded depending on selected serial port) #define M_UCSRxA SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number #define M_UCSRxB SERIAL_REGNAME(UCSR,SERIAL_PORT,B) #define M_RXENx SERIAL_REGNAME(RXEN,SERIAL_PORT,) #define M_TXENx SERIAL_REGNAME(TXEN,SERIAL_PORT,) #define M_TXCx SERIAL_REGNAME(TXC,SERIAL_PORT,) #define M_RXCIEx SERIAL_REGNAME(RXCIE,SERIAL_PORT,) #define M_UDREx SERIAL_REGNAME(UDRE,SERIAL_PORT,) #define M_UDRIEx SERIAL_REGNAME(UDRIE,SERIAL_PORT,) #define M_UDRx SERIAL_REGNAME(UDR,SERIAL_PORT,) #define M_UBRRxH SERIAL_REGNAME(UBRR,SERIAL_PORT,H) #define M_UBRRxL SERIAL_REGNAME(UBRR,SERIAL_PORT,L) #define M_RXCx SERIAL_REGNAME(RXC,SERIAL_PORT,) #define M_USARTx_RX_vect SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect) #define M_U2Xx SERIAL_REGNAME(U2X,SERIAL_PORT,) #define M_USARTx_UDRE_vect SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect) #define DEC 10 #define HEX 16 #define OCT 8 #define BIN 2 #define BYTE 0 // Define constants and variables for buffering serial data. // Use only 0 or powers of 2 greater than 1 // : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...] #ifndef RX_BUFFER_SIZE #define RX_BUFFER_SIZE 128 #endif // 256 is the max TX buffer limit due to uint8_t head and tail. #ifndef TX_BUFFER_SIZE #define TX_BUFFER_SIZE 32 #endif #ifndef USBCON #if RX_BUFFER_SIZE > 256 typedef uint16_t ring_buffer_pos_t; #else typedef uint8_t ring_buffer_pos_t; #endif #if ENABLED(SERIAL_STATS_DROPPED_RX) extern uint8_t rx_dropped_bytes; #endif #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) extern ring_buffer_pos_t rx_max_enqueued; #endif class MarlinSerial { //: public Stream public: MarlinSerial() {}; static void begin(const long); static void end(); static int peek(void); static int read(void); static void flush(void); static ring_buffer_pos_t available(void); static void checkRx(void); static void write(const uint8_t c); #if TX_BUFFER_SIZE > 0 static uint8_t availableForWrite(void); static void flushTX(void); #endif static void writeNoHandshake(const uint8_t c); #if ENABLED(SERIAL_STATS_DROPPED_RX) FORCE_INLINE static uint32_t dropped() { return rx_dropped_bytes; } #endif #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return rx_max_enqueued; } #endif private: static void printNumber(unsigned long, const uint8_t); static void printFloat(double, uint8_t); public: FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); } FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); } FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); } FORCE_INLINE static void print(const char* str) { write(str); } static void print(char, int = BYTE); static void print(unsigned char, int = BYTE); static void print(int, int = DEC); static void print(unsigned int, int = DEC); static void print(long, int = DEC); static void print(unsigned long, int = DEC); static void print(double, int = 2); static void println(const String& s); static void println(const char[]); static void println(char, int = BYTE); static void println(unsigned char, int = BYTE); static void println(int, int = DEC); static void println(unsigned int, int = DEC); static void println(long, int = DEC); static void println(unsigned long, int = DEC); static void println(double, int = 2); static void println(void); }; extern MarlinSerial customizedSerial; #endif // !USBCON // Use the UART for Bluetooth in AT90USB configurations #if defined(USBCON) && ENABLED(BLUETOOTH) extern HardwareSerial bluetoothSerial; #endif #endif // MARLINSERIAL_H