/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * German * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #ifndef LANGUAGE_DE_H #define LANGUAGE_DE_H #define MAPPER_C2C3 #define DISPLAY_CHARSET_ISO10646_1 #define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³") #define WELCOME_MSG MACHINE_NAME _UxGT(" bereit") #define MSG_BACK _UxGT("Zurück") #define MSG_SD_INSERTED _UxGT("SD-Karte erkannt") #define MSG_SD_REMOVED _UxGT("SD-Karte entfernt") #define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters #define MSG_MAIN _UxGT("Hauptmenü") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84 #define MSG_DEBUG_MENU _UxGT("Debug Menu") #define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittsb. Test") #define MSG_AUTO_HOME _UxGT("Home") // G28 #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate") #define MSG_LEVEL_BED_DONE _UxGT("Fertig") #define MSG_Z_FADE_HEIGHT _UxGT("Ausblendhöhe") #define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv") #define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp #define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA") #define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ") #define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle") #define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.") #define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett") #define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.") #define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS") #define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ") #define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle") #define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.") #define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett") #define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.") #define MSG_COOLDOWN _UxGT("Abkühlen") #define MSG_SWITCH_PS_ON _UxGT("Netzteil ein") #define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus") #define MSG_EXTRUDE _UxGT("Extrudieren") #define MSG_RETRACT _UxGT("Retract") #define MSG_MOVE_AXIS _UxGT("Bewegen") #define MSG_BED_LEVELING _UxGT("Bett Nivellierung") #define MSG_LEVEL_BED _UxGT("Bett nivellieren") #define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren") #define MSG_NEXT_CORNER _UxGT("Nächste Ecke") #define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.") #define MSG_USER_MENU _UxGT("Benutzer Menü") #define MSG_MOVING _UxGT("In Bewegung...") #define MSG_FREE_XY _UxGT("Abstand XY") #define MSG_MOVE_X _UxGT("X") #define MSG_MOVE_Y _UxGT("Y") #define MSG_MOVE_Z _UxGT("Z") #define MSG_MOVE_E _UxGT("Extruder ") #define MSG_MOVE_01MM _UxGT(" 0,1 mm") #define MSG_MOVE_1MM _UxGT(" 1,0 mm") #define MSG_MOVE_10MM _UxGT("10,0 mm") #define MSG_SPEED _UxGT("Geschw.") #define MSG_BED_Z _UxGT("Bett Z") #define MSG_NOZZLE _UxGT("Düse") #define MSG_BED _UxGT("Bett") #define MSG_FAN_SPEED _UxGT("Lüfter") #define MSG_FLOW _UxGT("Flussrate") #define MSG_CONTROL _UxGT("Einstellungen") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min") #define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max") #define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor") #define MSG_AUTOTEMP _UxGT("AutoTemp") #define MSG_ON _UxGT("Ein") #define MSG_OFF _UxGT("Aus") #define MSG_PID_P _UxGT("PID P") #define MSG_PID_I _UxGT("PID I") #define MSG_PID_D _UxGT("PID D") #define MSG_PID_C _UxGT("PID C") #define MSG_SELECT _UxGT("Auswählen") #define MSG_ACC _UxGT("A") #define MSG_JERK _UxGT("Jerk") #define MSG_VX_JERK _UxGT("V X Jerk") #define MSG_VY_JERK _UxGT("V Y Jerk") #define MSG_VZ_JERK _UxGT("V Z Jerk") #define MSG_VE_JERK _UxGT("V E Jerk") #define MSG_VELOCITY _UxGT("Geschwindigkeit") #define MSG_VMAX _UxGT("V max ") // space by purpose #define MSG_VMIN _UxGT("V min") #define MSG_VTRAV_MIN _UxGT("V min Leerfahrt") #define MSG_ACCELERATION _UxGT("Beschleunigung") #define MSG_AMAX _UxGT("A max ") // space by purpose #define MSG_A_RETRACT _UxGT("A Retract") #define MSG_A_TRAVEL _UxGT("A Leerfahrt") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #define MSG_XSTEPS _UxGT("X Steps/mm") #define MSG_YSTEPS _UxGT("Y Steps/mm") #define MSG_ZSTEPS _UxGT("Z Steps/mm") #define MSG_ESTEPS _UxGT("E Steps/mm") #define MSG_E1STEPS _UxGT("E1 Steps/mm") #define MSG_E2STEPS _UxGT("E2 Steps/mm") #define MSG_E3STEPS _UxGT("E3 Steps/mm") #define MSG_E4STEPS _UxGT("E4 Steps/mm") #define MSG_E5STEPS _UxGT("E5 Steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_MOTION _UxGT("Bewegung") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") #define MSG_FILAMENT_DIAM _UxGT("D Fil.") #define MSG_ADVANCE_K _UxGT("Advance Faktor") #define MSG_CONTRAST _UxGT("LCD Kontrast") #define MSG_STORE_EEPROM _UxGT("Konfig. speichern") #define MSG_LOAD_EEPROM _UxGT("Konfig. laden") #define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden") #define MSG_INIT_EEPROM _UxGT("Werkseinstellungen") #define MSG_REFRESH _UxGT("Aktualisieren") #define MSG_WATCH _UxGT("Info") #define MSG_PREPARE _UxGT("Vorbereitung") #define MSG_TUNE _UxGT("Justierung") #define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause") #define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung") #define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch") #define MSG_CARD_MENU _UxGT("SD-Karte") #define MSG_NO_CARD _UxGT("Keine SD-Karte") #define MSG_DWELL _UxGT("Warten...") #define MSG_USERWAIT _UxGT("Warte auf Nutzer") #define MSG_PRINT_PAUSED _UxGT("Druck pausiert") #define MSG_RESUMING _UxGT("Druckfortsetzung") #define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen") #define MSG_NO_MOVE _UxGT("Motoren eingeschaltet") #define MSG_KILLED _UxGT("ABGEBROCHEN") #define MSG_STOPPED _UxGT("ANGEHALTEN") #define MSG_CONTROL_RETRACT _UxGT("Retract mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm") #define MSG_CONTROL_RETRACTF _UxGT("Retract V") #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("Autom. Retract") #define MSG_FILAMENTCHANGE _UxGT("Filament wechseln") #define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface #define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21" #define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test") #define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") #define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch ausfahren") #define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren") #define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("homen") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.") #define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN") #define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG") #define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT") #define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") #define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") #define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") #define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") #define MSG_ERR_Z_HOMING _UxGT("G28 Z verboten") #define MSG_HALTED _UxGT("DRUCKER STOPP") #define MSG_PLEASE_RESET _UxGT("Bitte Resetten") #define MSG_SHORT_DAY _UxGT("t") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Extr. heizt...") #define MSG_HEATING_COMPLETE _UxGT("Extr. aufgeheizt") #define MSG_BED_HEATING _UxGT("Bett heizt...") #define MSG_BED_DONE _UxGT("Bett aufgeheizt") #define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte") #define MSG_DELTA_SETTINGS _UxGT("Delta Einst. anzeig.") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen") #define MSG_INFO_MENU _UxGT("Über den Drucker") #define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info") #define MSG_3POINT_LEVELING _UxGT("3-Punkt Nivellierung") #define MSG_LINEAR_LEVELING _UxGT("Lineare Nivellierung") #define MSG_BILINEAR_LEVELING _UxGT("Bilineare Nivell.") #define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") #define MSG_MESH_LEVELING _UxGT("Netz Nivellierung") #define MSG_INFO_STATS_MENU _UxGT("Drucker Statistik") #define MSG_INFO_BOARD_MENU _UxGT("Board Info") #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren") #define MSG_INFO_EXTRUDERS _UxGT("Extruder") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protokoll") #define MSG_CASE_LIGHT _UxGT("Beleuchtung") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit") #define MSG_UBL_DOING_G29 _UxGT("G29 UBL läuft!") #define MSG_UBL_UNHOMED _UxGT("Erst XYZ homen") #define MSG_UBL_TOOLS _UxGT("UBL Tools") #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") #define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.") #define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen") #define MSG_UBL_BC_INSERT2 _UxGT("Messen") #define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...") #define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren") #define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren") #define MSG_UBL_SET_BED_TEMP _UxGT("Bett Temp.") #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp.") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP #define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen") #define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA") #define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS") #define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netz Höhe einst.") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren") #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA") #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS") #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren") #define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.") #define MSG_UBL_MESH_LEVELING _UxGT("Netz Nivellierung") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt Nivellierung") #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz Nivell.") #define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren") #define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte") #define MSG_UBL_MAP_TYPE _UxGT("Kartentyp") #define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben") #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host") #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV") #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Externe Sicherung") #define MSG_UBL_INFO_UBL _UxGT("UBL Info ausgeben") #define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten") #define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Fill-in") #define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Fill-in") #define MSG_UBL_SMART_FILLIN _UxGT("Kluges Fill-in") #define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Netz") #define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren") #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.") #define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinstellung Alle") #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.") #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz Speicherplatz") #define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot") #define MSG_UBL_LOAD_MESH _UxGT("Bett Netz laden") #define MSG_UBL_SAVE_MESH _UxGT("Bett Netz speichern") #define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern") #define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke") #define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit") #define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob") #define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert") #else #define MSG_INFO_PRINT_COUNT _UxGT("Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett") #define MSG_INFO_PRINT_TIME _UxGT("Gesamt ") #define MSG_INFO_PRINT_LONGEST _UxGT("Längster") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") #endif #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("Stromversorgung") #define MSG_DRIVE_STRENGTH _UxGT("Motorströme") #define MSG_DAC_PERCENT _UxGT("Treiber %") #define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern") #define MSG_FILAMENT_CHANGE_HEADER _UxGT("DRUCK PAUSIERT") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:") #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter") #define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme") #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf...") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des") #define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes...") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_DE_H