/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * German * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_DE_H #define LANGUAGE_DE_H #define MAPPER_C2C3 #define DISPLAY_CHARSET_ISO10646_1 #define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³") #define WELCOME_MSG MACHINE_NAME _UxGT(" bereit") #define MSG_BACK _UxGT("Zurück") #define MSG_SD_INSERTED _UxGT("SD-Karte erkannt") #define MSG_SD_REMOVED _UxGT("SD-Karte entfernt") #define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters #define MSG_MAIN _UxGT("Hauptmenü") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84 #define MSG_AUTO_HOME _UxGT("Home") // G28 #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate") #define MSG_LEVEL_BED_DONE _UxGT("Fertig") #define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv") #define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp #define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA") #define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ") #define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle") #define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.") #define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett") #define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.") #define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS") #define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ") #define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle") #define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.") #define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett") #define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.") #define MSG_COOLDOWN _UxGT("Abkühlen") #define MSG_SWITCH_PS_ON _UxGT("Netzteil ein") #define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus") #define MSG_EXTRUDE _UxGT("Extrudieren") #define MSG_RETRACT _UxGT("Retract") #define MSG_MOVE_AXIS _UxGT("Bewegen") #define MSG_BED_LEVELING _UxGT("Bett nivellieren") #define MSG_LEVEL_BED _UxGT("Bett nivellieren") #define MSG_MOVING _UxGT("In Bewegung...") #define MSG_FREE_XY _UxGT("Abstand XY") #define MSG_MOVE_X _UxGT("X") #define MSG_MOVE_Y _UxGT("Y") #define MSG_MOVE_Z _UxGT("Z") #define MSG_MOVE_E _UxGT("Extruder ") #define MSG_MOVE_01MM _UxGT(" 0,1 mm") #define MSG_MOVE_1MM _UxGT(" 1,0 mm") #define MSG_MOVE_10MM _UxGT("10,0 mm") #define MSG_SPEED _UxGT("Geschw.") #define MSG_BED_Z _UxGT("Bett Z") #define MSG_NOZZLE _UxGT("Düse") #define MSG_BED _UxGT("Bett") #define MSG_FAN_SPEED _UxGT("Lüfter") #define MSG_FLOW _UxGT("Durchfluss") #define MSG_CONTROL _UxGT("Einstellungen") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min") #define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max") #define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor") #define MSG_AUTOTEMP _UxGT("AutoTemp") #define MSG_ON _UxGT("Ein") #define MSG_OFF _UxGT("Aus") #define MSG_PID_P _UxGT("PID P") #define MSG_PID_I _UxGT("PID I") #define MSG_PID_D _UxGT("PID D") #define MSG_PID_C _UxGT("PID C") #define MSG_SELECT _UxGT("Auswählen") #define MSG_ACC _UxGT("A") #define MSG_JERK _UxGT("Jerk") #define MSG_VX_JERK _UxGT("V X Jerk") #define MSG_VY_JERK _UxGT("V Y Jerk") #define MSG_VZ_JERK _UxGT("V Z Jerk") #define MSG_VE_JERK _UxGT("V E Jerk") #define MSG_VMAX _UxGT("V max ") // space by purpose #define MSG_VMIN _UxGT("V min") #define MSG_VTRAV_MIN _UxGT("V min Leerfahrt") #define MSG_AMAX _UxGT("A max ") // space by purpose #define MSG_A_RETRACT _UxGT("A Retract") #define MSG_A_TRAVEL _UxGT("A Leerfahrt") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #define MSG_XSTEPS _UxGT("X Steps/mm") #define MSG_YSTEPS _UxGT("Y Steps/mm") #define MSG_ZSTEPS _UxGT("Z Steps/mm") #define MSG_ESTEPS _UxGT("E Steps/mm") #define MSG_E1STEPS _UxGT("E1 Steps/mm") #define MSG_E2STEPS _UxGT("E2 Steps/mm") #define MSG_E3STEPS _UxGT("E3 Steps/mm") #define MSG_E4STEPS _UxGT("E4 Steps/mm") #define MSG_E5STEPS _UxGT("E5 Steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_MOTION _UxGT("Bewegung") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") #define MSG_FILAMENT_DIAM _UxGT("D Fil.") #define MSG_ADVANCE_K _UxGT("Advance Faktor") #define MSG_CONTRAST _UxGT("LCD Kontrast") #define MSG_STORE_EEPROM _UxGT("EPROM speichern") #define MSG_LOAD_EEPROM _UxGT("EPROM laden") #define MSG_RESTORE_FAILSAFE _UxGT("Standardkonfiguration") #define MSG_REFRESH _UxGT("Aktualisieren") #define MSG_WATCH _UxGT("Info") #define MSG_PREPARE _UxGT("Vorbereitung") #define MSG_TUNE _UxGT("Justierung") #define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause") #define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung") #define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch") #define MSG_CARD_MENU _UxGT("SD-Karte") #define MSG_NO_CARD _UxGT("Keine SD-Karte") #define MSG_DWELL _UxGT("Warten...") #define MSG_USERWAIT _UxGT("Warte auf Nutzer") #define MSG_RESUMING _UxGT("Druckfortsetzung") #define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen") #define MSG_NO_MOVE _UxGT("Motoren eingeschaltet") #define MSG_KILLED _UxGT("ABGEBROCHEN") #define MSG_STOPPED _UxGT("ANGEHALTEN") #define MSG_CONTROL_RETRACT _UxGT("Retract mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm") #define MSG_CONTROL_RETRACTF _UxGT("Retract V") #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("Autom. Retract") #define MSG_FILAMENTCHANGE _UxGT("Filament wechseln") #define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface #define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21" #define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test") #define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") #define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("homen") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.") #define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN") #define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG") #define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT") #define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") #define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") #define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") #define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") #define MSG_ERR_Z_HOMING _UxGT("G28 Z verboten") #define MSG_HALTED _UxGT("DRUCKER STOPP") #define MSG_PLEASE_RESET _UxGT("Bitte Resetten") #define MSG_SHORT_DAY _UxGT("t") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Extr. heizt...") #define MSG_HEATING_COMPLETE _UxGT("Extr. aufgeheizt") #define MSG_BED_HEATING _UxGT("Bett heizt...") #define MSG_BED_DONE _UxGT("Bett aufgeheizt") #define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen") #define MSG_DEBUG_MENU _UxGT("Debug Menu") #define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittb. Test") #define MSG_INFO_MENU _UxGT("Über den Drucker") #define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info") #define MSG_INFO_STATS_MENU _UxGT("Drucker Stat.") #define MSG_INFO_BOARD_MENU _UxGT("Board Info") #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren") #define MSG_INFO_EXTRUDERS _UxGT("Extruder") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protokoll") #define MSG_CASE_LIGHT _UxGT("Licht") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke") #define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit") #define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob") #define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert") #else #define MSG_INFO_PRINT_COUNT _UxGT("Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett") #define MSG_INFO_PRINT_TIME _UxGT("Gesamt ") #define MSG_INFO_PRINT_LONGEST _UxGT("Längster") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") #endif #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("Stromversorgung") #define MSG_DRIVE_STRENGTH _UxGT("Motorströme") #define MSG_DAC_PERCENT _UxGT("Treiber %") #define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern") #define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter") #define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme") #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf.") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des") #define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_DE_H