/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * */ /** * Danish * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_DA_H #define LANGUAGE_DA_H #define MAPPER_C2C3 #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME _UxGT(" er klar") #define MSG_SD_INSERTED _UxGT("Kort isat") #define MSG_SD_REMOVED _UxGT("Kort fjernet") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Menu") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Slå alle steppere fra") #define MSG_AUTO_HOME _UxGT("Auto Home") // G28 #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klik når du er klar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Næste punkt") #define MSG_LEVEL_BED_DONE _UxGT("Bed level er færdig!") #define MSG_SET_HOME_OFFSETS _UxGT("Sæt forsk. af home") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Forsk. er nu aktiv") #define MSG_SET_ORIGIN _UxGT("Sæt origin") #define MSG_PREHEAT_1 _UxGT("Forvarm PLA") #define MSG_PREHEAT_1_N _UxGT("Forvarm PLA ") #define MSG_PREHEAT_1_ALL _UxGT("Forvarm PLA Alle") #define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm PLA Bed") #define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm PLA conf") #define MSG_PREHEAT_2 _UxGT("Forvarm ABS") #define MSG_PREHEAT_2_N _UxGT("Forvarm ABS ") #define MSG_PREHEAT_2_ALL _UxGT("Forvarm ABS Alle") #define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm ABS Bed") #define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm ABS conf") #define MSG_COOLDOWN _UxGT("Afkøl") #define MSG_SWITCH_PS_ON _UxGT("Slå strøm til") #define MSG_SWITCH_PS_OFF _UxGT("Slå strøm fra") #define MSG_EXTRUDE _UxGT("Extruder") #define MSG_RETRACT _UxGT("Retract") #define MSG_MOVE_AXIS _UxGT("Flyt akser") #define MSG_BED_LEVELING _UxGT("Juster bed") #define MSG_LEVEL_BED _UxGT("Juster bed") #define MSG_MOVE_X _UxGT("Flyt X") #define MSG_MOVE_Y _UxGT("Flyt Y") #define MSG_MOVE_Z _UxGT("Flyt Z") #define MSG_MOVE_E _UxGT("Extruder") #define MSG_MOVE_01MM _UxGT("Flyt 0.1mm") #define MSG_MOVE_1MM _UxGT("Flyt 1mm") #define MSG_MOVE_10MM _UxGT("Flyt 10mm") #define MSG_SPEED _UxGT("Hastighed") #define MSG_BED_Z _UxGT("Plade Z") #define MSG_NOZZLE _UxGT("Dyse") #define MSG_BED _UxGT("Plade") #define MSG_FAN_SPEED _UxGT("Blæser hastighed") #define MSG_FLOW _UxGT("Flow") #define MSG_CONTROL _UxGT("Kontrol") #define MSG_MIN _UxGT(" \002 Min") #define MSG_MAX _UxGT(" \002 Max") #define MSG_FACTOR _UxGT(" \002 Fact") #define MSG_AUTOTEMP _UxGT("Autotemp") #define MSG_ON _UxGT("Til ") #define MSG_OFF _UxGT("Fra") #define MSG_PID_P _UxGT("PID-P") #define MSG_PID_I _UxGT("PID-I") #define MSG_PID_D _UxGT("PID-D") #define MSG_PID_C _UxGT("PID-C") #define MSG_SELECT _UxGT("Vælg") #define MSG_ACC _UxGT("Accel") #define MSG_JERK _UxGT("Jerk") #define MSG_VX_JERK _UxGT("Vx-jerk") #define MSG_VY_JERK _UxGT("Vy-jerk") #define MSG_VZ_JERK _UxGT("Vz-jerk") #define MSG_VE_JERK _UxGT("Ve-jerk") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin") #define MSG_VTRAV_MIN _UxGT("VTrav min") #define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A-retract") #define MSG_A_TRAVEL _UxGT("A-rejse") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #define MSG_XSTEPS _UxGT("Xsteps/mm") #define MSG_YSTEPS _UxGT("Ysteps/mm") #define MSG_ZSTEPS _UxGT("Zsteps/mm") #define MSG_ESTEPS _UxGT("Esteps/mm") #define MSG_E1STEPS _UxGT("E1steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_MOTION _UxGT("Bevægelse") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E i mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("LCD kontrast") #define MSG_STORE_EEPROM _UxGT("Gem i EEPROM") #define MSG_LOAD_EEPROM _UxGT("Hent fra EEPROM") #define MSG_RESTORE_FAILSAFE _UxGT("Gendan failsafe") #define MSG_REFRESH _UxGT("Genopfrisk") #define MSG_WATCH _UxGT("Info skærm") #define MSG_PREPARE _UxGT("Forbered") #define MSG_TUNE _UxGT("Tune") #define MSG_PAUSE_PRINT _UxGT("Pause printet") #define MSG_RESUME_PRINT _UxGT("Forsæt printet") #define MSG_STOP_PRINT _UxGT("Stop printet") #define MSG_CARD_MENU _UxGT("Print fra SD") #define MSG_NO_CARD _UxGT("Intet SD kort") #define MSG_DWELL _UxGT("Dvale...") #define MSG_USERWAIT _UxGT("Venter på bruger...") #define MSG_RESUMING _UxGT("Forsætter printet") #define MSG_PRINT_ABORTED _UxGT("Print annulleret") #define MSG_NO_MOVE _UxGT("Ingen bevægelse.") #define MSG_KILLED _UxGT("DRÆBT. ") #define MSG_STOPPED _UxGT("STOPPET. ") #define MSG_CONTROL_RETRACT _UxGT("Tilbagetræk mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Skift Re.mm") #define MSG_CONTROL_RETRACTF _UxGT("Tilbagetræk V") #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Skift UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Skift filament") #define MSG_INIT_SDCARD _UxGT("Init. SD card") #define MSG_CNG_SDCARD _UxGT("Skift SD kort") #define MSG_ZPROBE_OUT _UxGT("Probe udenfor plade") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selv-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("først") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #define MSG_HEATING_FAILED_LCD _UxGT("Opvarmning fejlet") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Fejl: reserve temp") #define MSG_THERMAL_RUNAWAY _UxGT("Temp løber løbsk") #define MSG_ERR_MAXTEMP _UxGT("Fejl: Maks temp") #define MSG_ERR_MINTEMP _UxGT("Fejl: Min temp") #define MSG_ERR_MAXTEMP_BED _UxGT("Fejl: Maks Plade temp") #define MSG_ERR_MINTEMP_BED _UxGT("Fejl: Min Plade temp") #define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbudt") #define MSG_HALTED _UxGT("PRINTER STOPPET") #define MSG_PLEASE_RESET _UxGT("Reset Venligst") #define MSG_SHORT_DAY _UxGT("d") // Kun et bogstav #define MSG_SHORT_HOUR _UxGT("h") // Kun et bogstav #define MSG_SHORT_MINUTE _UxGT("m") // Kun et bogstav #define MSG_HEATING _UxGT("Opvarmer...") #define MSG_HEATING_COMPLETE _UxGT("Opvarmet") #define MSG_BED_HEATING _UxGT("Opvarmer plade") #define MSG_BED_DONE _UxGT("Plade opvarmet") #define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrering") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrer X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrer Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrer Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrerings Center") #define MSG_INFO_MENU _UxGT("Om Printer") #define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") #define MSG_INFO_STATS_MENU _UxGT("Printer Stats") #define MSG_INFO_BOARD_MENU _UxGT("Kort Info") #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") #define MSG_INFO_EXTRUDERS _UxGT("Extruders") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocol") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Ant. Prints") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige") #define MSG_INFO_PRINT_TIME _UxGT("Total print tid") #define MSG_INFO_PRINT_LONGEST _UxGT("Længste print") #define MSG_INFO_PRINT_FILAMENT _UxGT("Total Extruderet") #else #define MSG_INFO_PRINT_COUNT _UxGT("Prints") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige") #define MSG_INFO_PRINT_TIME _UxGT("Total") #define MSG_INFO_PRINT_LONGEST _UxGT("Længste") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruderet") #endif #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("Strømfors.") #define MSG_DRIVE_STRENGTH _UxGT("Driv Styrke") #define MSG_DAC_PERCENT _UxGT("Driv %") #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Skriv") #define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruder mere") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print") #if LCD_HEIGHT >= 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent på start") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("af filament") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("skift") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vent på") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament udskyd.") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("og tryk på knap") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("for at fortsætte...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Vent på") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament indtag") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vent på") #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrudering") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Vent på at print") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("fortsætter") #else // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent venligst...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Udskyder...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt og klik") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Indtager...") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudere...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsætter...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_DA_H