/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_55[][2] PROGMEM = {
  { OV(   1), 500 },
  { OV(  76), 300 },
  { OV(  87), 290 },
  { OV( 100), 280 },
  { OV( 114), 270 },
  { OV( 131), 260 },
  { OV( 152), 250 },
  { OV( 175), 240 },
  { OV( 202), 230 },
  { OV( 234), 220 },
  { OV( 271), 210 },
  { OV( 312), 200 },
  { OV( 359), 190 },
  { OV( 411), 180 },
  { OV( 467), 170 },
  { OV( 527), 160 },
  { OV( 590), 150 },
  { OV( 652), 140 },
  { OV( 713), 130 },
  { OV( 770), 120 },
  { OV( 822), 110 },
  { OV( 867), 100 },
  { OV( 905),  90 },
  { OV( 936),  80 },
  { OV( 961),  70 },
  { OV( 979),  60 },
  { OV( 993),  50 },
  { OV(1003),  40 },
  { OV(1010),  30 },
  { OV(1015),  20 },
  { OV(1018),  10 },
  { OV(1020),   0 }
};