/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * German * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_DE_H #define LANGUAGE_DE_H #define MAPPER_C2C3 // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h //#define SIMULATE_ROMFONT #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME " bereit" #define MSG_SD_INSERTED "SD-Karte erkannt" #define MSG_SD_REMOVED "SD-Karte entfernt" #define MSG_MAIN "Hauptmenü" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Motoren aus" // M84 #define MSG_AUTO_HOME "Home" // G28 #define MSG_LEVEL_BED_HOMING "Homing XYZ" #define MSG_LEVEL_BED_WAITING "Klick für Start" #define MSG_LEVEL_BED_DONE "Fertig" #define MSG_LEVEL_BED_CANCEL "Abbruch" #define MSG_SET_HOME_OFFSETS "Setze Homeoffsets" #define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv" #define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp #define MSG_PREHEAT_PLA "Vorwärmen PLA" #define MSG_PREHEAT_PLA_N "Vorwärmen PLA " #define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle" #define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett" #define MSG_PREHEAT_PLA_SETTINGS "Vorw. PLA Einst." #define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_PREHEAT_ABS_N "Vorwärmen ABS " #define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle" #define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett" #define MSG_PREHEAT_ABS_SETTINGS "Vorw. ABS Einst." #define MSG_COOLDOWN "Abkühlen" #define MSG_SWITCH_PS_ON "Netzteil ein" #define MSG_SWITCH_PS_OFF "Netzteil aus" #define MSG_EXTRUDE "Extrudieren" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Bewegen" #define MSG_LEVEL_BED "Bett nivellieren" #define MSG_MOVE_X "X" #define MSG_MOVE_Y "Y" #define MSG_MOVE_Z "Z" #define MSG_MOVE_E "E" #define MSG_MOVE_01MM " 0.1 mm" #define MSG_MOVE_1MM " 1.0 mm" #define MSG_MOVE_10MM "10.0 mm" #define MSG_SPEED "Geschw." #define MSG_BED_Z "Bett Z" #define MSG_NOZZLE "Düse" #define MSG_BED "Bett" #define MSG_FAN_SPEED "Lüfter" #define MSG_FLOW "Durchfluss" #define MSG_CONTROL "Einstellungen" #define MSG_MIN LCD_STR_THERMOMETER " min" #define MSG_MAX LCD_STR_THERMOMETER " max" #define MSG_FACTOR LCD_STR_THERMOMETER " Faktor" #define MSG_AUTOTEMP "AutoTemp" #define MSG_ON "Ein" #define MSG_OFF "Aus" #define MSG_PID_P "PID P" #define MSG_PID_I "PID I" #define MSG_PID_D "PID D" #define MSG_PID_C "PID C" #define MSG_ACC "A" #define MSG_VXY_JERK "V XY Jerk" #define MSG_VZ_JERK "V Z Jerk" #define MSG_VE_JERK "V E Jerk" #define MSG_VMAX "V max " // space by purpose #define MSG_X "X" #define MSG_Y "Y" #define MSG_Z "Z" #define MSG_E "E" #define MSG_VMIN "V min" #define MSG_VTRAV_MIN "V min Leerfahrt" #define MSG_AMAX "A max " // space by purpose #define MSG_A_RETRACT "A Retract" #define MSG_A_TRAVEL "A Leerfahrt" #define MSG_XSTEPS "X Steps/mm" #define MSG_YSTEPS "Y Steps/mm" #define MSG_ZSTEPS "Z Steps/mm" #define MSG_ESTEPS "E Steps/mm" #define MSG_TEMPERATURE "Temperatur" #define MSG_MOTION "Bewegung" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm³" #define MSG_FILAMENT_DIAM "D Fil." #define MSG_CONTRAST "LCD Kontrast" #define MSG_STORE_EPROM "EPROM speichern" #define MSG_LOAD_EPROM "EPROM laden" #define MSG_RESTORE_FAILSAFE "Standardkonfiguration" #define MSG_REFRESH "Aktualisieren" #define MSG_WATCH "Info" #define MSG_PREPARE "Vorbereitung" #define MSG_TUNE "Justierung" #define MSG_PAUSE_PRINT "SD-Druck Pause" #define MSG_RESUME_PRINT "SD-Druck Fortsetzung" #define MSG_STOP_PRINT "SD-Druck Abbruch" #define MSG_CARD_MENU "SD-Karte" #define MSG_NO_CARD "Keine SD-Karte" #define MSG_DWELL "Warten..." #define MSG_USERWAIT "Warte auf Nutzer" #define MSG_RESUMING "Druckfortsetzung" #define MSG_PRINT_ABORTED "Druck abgebrochen" #define MSG_NO_MOVE "Motoren eingeschaltet" #define MSG_KILLED "KILLED" #define MSG_STOPPED "ANGEHALTEN" #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm" #define MSG_CONTROL_RETRACTF "Retract V" #define MSG_CONTROL_RETRACT_ZLIFT "Z-Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #define MSG_AUTORETRACT "AutoRetract" #define MSG_FILAMENTCHANGE "Filament wechseln" #define MSG_INIT_SDCARD "SD-Karte erkennen" // Manually initialize the SD-card via user interface #define MSG_CNG_SDCARD "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21" #define MSG_ZPROBE_OUT "Sensor ausserhalb" #define MSG_YX_UNHOMED "X/Y vor Z homen!" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop-Abbr. ein" #define MSG_HEATING_FAILED_LCD "HEIZEN FEHLGESCHLAGEN" #define MSG_ERR_REDUNDANT_TEMP "REDUND. TEMPERATURABWEICHUNG" #define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER " NICHT ERREICHT" #define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER " ÜBERSCHRITTEN" #define MSG_ERR_MINTEMP LCD_STR_THERMOMETER " UNTERSCHRITTEN" #define MSG_ERR_MAXTEMP_BED "BETT " LCD_STR_THERMOMETER " ÜBERSCHRITTEN" #define MSG_ERR_MINTEMP_BED "BETT " LCD_STR_THERMOMETER " UNTERSCHRITTEN" #define MSG_END_HOUR "Stunden" #define MSG_END_MINUTE "Minuten" #define MSG_HEATING "Aufheizen..." #define MSG_HEATING_COMPLETE "Aufgeheizt" #define MSG_BED_HEATING "Bett aufheizen" #define MSG_BED_DONE "Bett aufgeheizt" #define MSG_DELTA_CALIBRATE "Delta kalibrieren" #define MSG_DELTA_CALIBRATE_X "Kalibriere X" #define MSG_DELTA_CALIBRATE_Y "Kalibriere Y" #define MSG_DELTA_CALIBRATE_Z "Kalibriere Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte" #endif // LANGUAGE_DE_H