/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. This software may be distributed and modified under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation and appearing in the file GPL2.TXT included in the packaging of this file. Please note that GPL2 Section 2[b] requires that all works based on this software must also be made publicly available under the terms of the GPL2 ("Copyleft"). Contact information ------------------- Circuits At Home, LTD Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ #if !defined(_usb_h_) || defined(_ch9_h_) #error "Never include usb_ch9.h directly; include Usb.h instead" #else /* USB chapter 9 structures */ #define _ch9_h_ /* Misc.USB constants */ #define DEV_DESCR_LEN 18 //device descriptor length #define CONF_DESCR_LEN 9 //configuration descriptor length #define INTR_DESCR_LEN 9 //interface descriptor length #define EP_DESCR_LEN 7 //endpoint descriptor length /* Standard Device Requests */ #define USB_REQUEST_GET_STATUS 0 // Standard Device Request - GET STATUS #define USB_REQUEST_CLEAR_FEATURE 1 // Standard Device Request - CLEAR FEATURE #define USB_REQUEST_SET_FEATURE 3 // Standard Device Request - SET FEATURE #define USB_REQUEST_SET_ADDRESS 5 // Standard Device Request - SET ADDRESS #define USB_REQUEST_GET_DESCRIPTOR 6 // Standard Device Request - GET DESCRIPTOR #define USB_REQUEST_SET_DESCRIPTOR 7 // Standard Device Request - SET DESCRIPTOR #define USB_REQUEST_GET_CONFIGURATION 8 // Standard Device Request - GET CONFIGURATION #define USB_REQUEST_SET_CONFIGURATION 9 // Standard Device Request - SET CONFIGURATION #define USB_REQUEST_GET_INTERFACE 10 // Standard Device Request - GET INTERFACE #define USB_REQUEST_SET_INTERFACE 11 // Standard Device Request - SET INTERFACE #define USB_REQUEST_SYNCH_FRAME 12 // Standard Device Request - SYNCH FRAME #define USB_FEATURE_ENDPOINT_HALT 0 // CLEAR/SET FEATURE - Endpoint Halt #define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // CLEAR/SET FEATURE - Device remote wake-up #define USB_FEATURE_TEST_MODE 2 // CLEAR/SET FEATURE - Test mode /* Setup Data Constants */ #define USB_SETUP_HOST_TO_DEVICE 0x00 // Device Request bmRequestType transfer direction - host to device transfer #define USB_SETUP_DEVICE_TO_HOST 0x80 // Device Request bmRequestType transfer direction - device to host transfer #define USB_SETUP_TYPE_STANDARD 0x00 // Device Request bmRequestType type - standard #define USB_SETUP_TYPE_CLASS 0x20 // Device Request bmRequestType type - class #define USB_SETUP_TYPE_VENDOR 0x40 // Device Request bmRequestType type - vendor #define USB_SETUP_RECIPIENT_DEVICE 0x00 // Device Request bmRequestType recipient - device #define USB_SETUP_RECIPIENT_INTERFACE 0x01 // Device Request bmRequestType recipient - interface #define USB_SETUP_RECIPIENT_ENDPOINT 0x02 // Device Request bmRequestType recipient - endpoint #define USB_SETUP_RECIPIENT_OTHER 0x03 // Device Request bmRequestType recipient - other /* USB descriptors */ #define USB_DESCRIPTOR_DEVICE 0x01 // bDescriptorType for a Device Descriptor. #define USB_DESCRIPTOR_CONFIGURATION 0x02 // bDescriptorType for a Configuration Descriptor. #define USB_DESCRIPTOR_STRING 0x03 // bDescriptorType for a String Descriptor. #define USB_DESCRIPTOR_INTERFACE 0x04 // bDescriptorType for an Interface Descriptor. #define USB_DESCRIPTOR_ENDPOINT 0x05 // bDescriptorType for an Endpoint Descriptor. #define USB_DESCRIPTOR_DEVICE_QUALIFIER 0x06 // bDescriptorType for a Device Qualifier. #define USB_DESCRIPTOR_OTHER_SPEED 0x07 // bDescriptorType for a Other Speed Configuration. #define USB_DESCRIPTOR_INTERFACE_POWER 0x08 // bDescriptorType for Interface Power. #define USB_DESCRIPTOR_OTG 0x09 // bDescriptorType for an OTG Descriptor. #define HID_DESCRIPTOR_HID 0x21 /* OTG SET FEATURE Constants */ #define OTG_FEATURE_B_HNP_ENABLE 3 // SET FEATURE OTG - Enable B device to perform HNP #define OTG_FEATURE_A_HNP_SUPPORT 4 // SET FEATURE OTG - A device supports HNP #define OTG_FEATURE_A_ALT_HNP_SUPPORT 5 // SET FEATURE OTG - Another port on the A device supports HNP /* USB Endpoint Transfer Types */ #define USB_TRANSFER_TYPE_CONTROL 0x00 // Endpoint is a control endpoint. #define USB_TRANSFER_TYPE_ISOCHRONOUS 0x01 // Endpoint is an isochronous endpoint. #define USB_TRANSFER_TYPE_BULK 0x02 // Endpoint is a bulk endpoint. #define USB_TRANSFER_TYPE_INTERRUPT 0x03 // Endpoint is an interrupt endpoint. #define bmUSB_TRANSFER_TYPE 0x03 // bit mask to separate transfer type from ISO attributes /* Standard Feature Selectors for CLEAR_FEATURE Requests */ #define USB_FEATURE_ENDPOINT_STALL 0 // Endpoint recipient #define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // Device recipient #define USB_FEATURE_TEST_MODE 2 // Device recipient /* descriptor data structures */ /* Device descriptor structure */ typedef struct { uint8_t bLength; // Length of this descriptor. uint8_t bDescriptorType; // DEVICE descriptor type (USB_DESCRIPTOR_DEVICE). uint16_t bcdUSB; // USB Spec Release Number (BCD). uint8_t bDeviceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific. uint8_t bDeviceSubClass; // Subclass code (assigned by the USB-IF). uint8_t bDeviceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific. uint8_t bMaxPacketSize0; // Maximum packet size for endpoint 0. uint16_t idVendor; // Vendor ID (assigned by the USB-IF). uint16_t idProduct; // Product ID (assigned by the manufacturer). uint16_t bcdDevice; // Device release number (BCD). uint8_t iManufacturer; // Index of String Descriptor describing the manufacturer. uint8_t iProduct; // Index of String Descriptor describing the product. uint8_t iSerialNumber; // Index of String Descriptor with the device's serial number. uint8_t bNumConfigurations; // Number of possible configurations. } __attribute__((packed)) USB_DEVICE_DESCRIPTOR; /* Configuration descriptor structure */ typedef struct { uint8_t bLength; // Length of this descriptor. uint8_t bDescriptorType; // CONFIGURATION descriptor type (USB_DESCRIPTOR_CONFIGURATION). uint16_t wTotalLength; // Total length of all descriptors for this configuration. uint8_t bNumInterfaces; // Number of interfaces in this configuration. uint8_t bConfigurationValue; // Value of this configuration (1 based). uint8_t iConfiguration; // Index of String Descriptor describing the configuration. uint8_t bmAttributes; // Configuration characteristics. uint8_t bMaxPower; // Maximum power consumed by this configuration. } __attribute__((packed)) USB_CONFIGURATION_DESCRIPTOR; /* Interface descriptor structure */ typedef struct { uint8_t bLength; // Length of this descriptor. uint8_t bDescriptorType; // INTERFACE descriptor type (USB_DESCRIPTOR_INTERFACE). uint8_t bInterfaceNumber; // Number of this interface (0 based). uint8_t bAlternateSetting; // Value of this alternate interface setting. uint8_t bNumEndpoints; // Number of endpoints in this interface. uint8_t bInterfaceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific. uint8_t bInterfaceSubClass; // Subclass code (assigned by the USB-IF). uint8_t bInterfaceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific. uint8_t iInterface; // Index of String Descriptor describing the interface. } __attribute__((packed)) USB_INTERFACE_DESCRIPTOR; /* Endpoint descriptor structure */ typedef struct { uint8_t bLength; // Length of this descriptor. uint8_t bDescriptorType; // ENDPOINT descriptor type (USB_DESCRIPTOR_ENDPOINT). uint8_t bEndpointAddress; // Endpoint address. Bit 7 indicates direction (0=OUT, 1=IN). uint8_t bmAttributes; // Endpoint transfer type. uint16_t wMaxPacketSize; // Maximum packet size. uint8_t bInterval; // Polling interval in frames. } __attribute__((packed)) USB_ENDPOINT_DESCRIPTOR; #endif // _ch9_h_