/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * */ /** * German * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_DE_H #define LANGUAGE_DE_H #define MAPPER_C2C3 #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME " bereit" #define MSG_SD_INSERTED "SD-Karte erkannt" #define MSG_SD_REMOVED "SD-Karte entfernt" #define MSG_MAIN "Hauptmenü" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Motoren aus" // M84 #define MSG_AUTO_HOME "Home" // G28 #define MSG_LEVEL_BED_HOMING "Homing XYZ" #define MSG_LEVEL_BED_WAITING "Klick für Start" #define MSG_LEVEL_BED_DONE "Fertig" #define MSG_LEVEL_BED_CANCEL "Abbruch" #define MSG_SET_HOME_OFFSETS "Setze Homeoffsets" #define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv" #define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp #define MSG_PREHEAT_1 "Vorwärmen PLA" #define MSG_PREHEAT_1_N "Vorwärmen PLA " #define MSG_PREHEAT_1_ALL "Vorw. PLA Alle" #define MSG_PREHEAT_1_BEDONLY "Vorw. PLA Bett" #define MSG_PREHEAT_1_SETTINGS "Vorw. PLA Einst." #define MSG_PREHEAT_2 "Vorwärmen ABS" #define MSG_PREHEAT_2_N "Vorwärmen ABS " #define MSG_PREHEAT_2_ALL "Vorw. ABS Alle" #define MSG_PREHEAT_2_BEDONLY "Vorw. ABS Bett" #define MSG_PREHEAT_2_SETTINGS "Vorw. ABS Einst." #define MSG_COOLDOWN "Abkühlen" #define MSG_SWITCH_PS_ON "Netzteil ein" #define MSG_SWITCH_PS_OFF "Netzteil aus" #define MSG_EXTRUDE "Extrudieren" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Bewegen" #define MSG_LEVEL_BED "Bett nivellieren" #define MSG_MOVE_X "X" #define MSG_MOVE_Y "Y" #define MSG_MOVE_Z "Z" #define MSG_MOVE_E "Extruder " #define MSG_MOVE_01MM " 0.1 mm" #define MSG_MOVE_1MM " 1.0 mm" #define MSG_MOVE_10MM "10.0 mm" #define MSG_SPEED "Geschw." #define MSG_BED_Z "Bett Z" #define MSG_NOZZLE "Düse" #define MSG_BED "Bett" #define MSG_FAN_SPEED "Lüfter" #define MSG_FLOW "Durchfluss" #define MSG_CONTROL "Einstellungen" #define MSG_MIN LCD_STR_THERMOMETER " min" #define MSG_MAX LCD_STR_THERMOMETER " max" #define MSG_FACTOR LCD_STR_THERMOMETER " Faktor" #define MSG_AUTOTEMP "AutoTemp" #define MSG_ON "Ein" #define MSG_OFF "Aus" #define MSG_PID_P "PID P" #define MSG_PID_I "PID I" #define MSG_PID_D "PID D" #define MSG_PID_C "PID C" #define MSG_ACC "A" #define MSG_VXY_JERK "V XY Jerk" #define MSG_VZ_JERK "V Z Jerk" #define MSG_VE_JERK "V E Jerk" #define MSG_VMAX "V max " // space by purpose #define MSG_VMIN "V min" #define MSG_VTRAV_MIN "V min Leerfahrt" #define MSG_AMAX "A max " // space by purpose #define MSG_A_RETRACT "A Retract" #define MSG_A_TRAVEL "A Leerfahrt" #define MSG_XSTEPS "X Steps/mm" #define MSG_YSTEPS "Y Steps/mm" #define MSG_ZSTEPS "Z Steps/mm" #define MSG_ESTEPS "E Steps/mm" #define MSG_TEMPERATURE "Temperatur" #define MSG_MOTION "Bewegung" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm³" #define MSG_FILAMENT_DIAM "D Fil." #define MSG_CONTRAST "LCD Kontrast" #define MSG_STORE_EPROM "EPROM speichern" #define MSG_LOAD_EPROM "EPROM laden" #define MSG_RESTORE_FAILSAFE "Standardkonfiguration" #define MSG_REFRESH "Aktualisieren" #define MSG_WATCH "Info" #define MSG_PREPARE "Vorbereitung" #define MSG_TUNE "Justierung" #define MSG_PAUSE_PRINT "SD-Druck Pause" #define MSG_RESUME_PRINT "SD-Druck Fortsetzung" #define MSG_STOP_PRINT "SD-Druck Abbruch" #define MSG_CARD_MENU "SD-Karte" #define MSG_NO_CARD "Keine SD-Karte" #define MSG_DWELL "Warten..." #define MSG_USERWAIT "Warte auf Nutzer" #define MSG_RESUMING "Druckfortsetzung" #define MSG_PRINT_ABORTED "Druck abgebrochen" #define MSG_NO_MOVE "Motoren eingeschaltet" #define MSG_KILLED "KILLED" #define MSG_STOPPED "ANGEHALTEN" #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm" #define MSG_CONTROL_RETRACTF "Retract V" #define MSG_CONTROL_RETRACT_ZLIFT "Z-Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #define MSG_AUTORETRACT "AutoRetract" #define MSG_FILAMENTCHANGE "Filament wechseln" #define MSG_INIT_SDCARD "SD-Karte erkennen" // Manually initialize the SD-card via user interface #define MSG_CNG_SDCARD "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21" #define MSG_ZPROBE_OUT "Sensor ausserhalb" #define MSG_HOME "Vorher" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST "homen" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop-Abbr. ein" #define MSG_HEATING_FAILED_LCD "HEIZEN FEHLGESCHLAGEN" #define MSG_ERR_REDUNDANT_TEMP "REDUND. TEMPERATURABWEICHUNG" #define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER " NICHT ERREICHT" #define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER " ÜBERSCHRITTEN" #define MSG_ERR_MINTEMP LCD_STR_THERMOMETER " UNTERSCHRITTEN" #define MSG_ERR_MAXTEMP_BED "BETT " LCD_STR_THERMOMETER " ÜBERSCHRITTEN" #define MSG_ERR_MINTEMP_BED "BETT " LCD_STR_THERMOMETER " UNTERSCHRITTEN" #define MSG_HEATING "Extr. Aufheizen..." #define MSG_HEATING_COMPLETE "Extr. aufgeheizt" #define MSG_BED_HEATING "Bett aufheizen" #define MSG_BED_DONE "Bett aufgeheizt" #define MSG_DELTA_CALIBRATE "Delta kalibrieren" #define MSG_DELTA_CALIBRATE_X "Kalibriere X" #define MSG_DELTA_CALIBRATE_Y "Kalibriere Y" #define MSG_DELTA_CALIBRATE_Z "Kalibriere Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte" #define MSG_INFO_MENU "Über den Drucker" #define MSG_INFO_PRINTER_MENU "Drucker Info" #define MSG_INFO_STATS_MENU "Drucker Stats" #define MSG_INFO_BOARD_MENU "Board Info" #define MSG_INFO_THERMISTOR_MENU "Thermistors" #define MSG_INFO_EXTRUDERS "Extruders" #define MSG_INFO_BAUDRATE "Baud" #define MSG_INFO_PROTOCOL "Protokol" #if LCD_WIDTH > 19 #define MSG_INFO_PRINT_COUNT "Gesamte Drucke" #define MSG_INFO_COMPLETED_PRINTS "Beendete Drucke" #define MSG_INFO_PRINT_TIME "Gesamte Druckzeit" #define MSG_INFO_PRINT_LONGEST "Längster Druckjob" #define MSG_INFO_PRINT_FILAMENT "Gesamt Extrudiert" #else #define MSG_INFO_PRINT_COUNT "Drucke" #define MSG_INFO_COMPLETED_PRINTS "Komplett" #define MSG_INFO_PRINT_TIME "Gesamt " #define MSG_INFO_PRINT_LONGEST "Längster" #define MSG_INFO_PRINT_FILAMENT "Extrud." #endif #define MSG_INFO_MIN_TEMP "Min Temp" #define MSG_INFO_MAX_TEMP "Max Temp" #define MSG_INFO_PSU "Stromversorgung" #define MSG_FILAMENT_CHANGE_HEADER "ÄNDERE FILAMENT" #define MSG_FILAMENT_CHANGE_OPTION_HEADER "ÄNDERE OPTIONEN:" #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude mehr" #define MSG_FILAMENT_CHANGE_OPTION_RESUME "Drucke weiter" #if LCD_HEIGHT >= 4 #define MSG_FILAMENT_CHANGE_INIT_1 "Warte auf den" #define MSG_FILAMENT_CHANGE_INIT_2 "Start zum " #define MSG_FILAMENT_CHANGE_INIT_3 "Filament wechsel" #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Warte auf das" #define MSG_FILAMENT_CHANGE_UNLOAD_2 "herrausnehmen" #define MSG_FILAMENT_CHANGE_UNLOAD_3 "des Filaments" #define MSG_FILAMENT_CHANGE_INSERT_1 "Fädel Filament" #define MSG_FILAMENT_CHANGE_INSERT_2 "ein und drücke" #define MSG_FILAMENT_CHANGE_INSERT_3 "den Knopf..." #define MSG_FILAMENT_CHANGE_LOAD_1 "Warte auf das" #define MSG_FILAMENT_CHANGE_LOAD_2 "laden des" #define MSG_FILAMENT_CHANGE_LOAD_3 "Filaments" #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Warte auf das" #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "Extruden des" #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "Filaments" #define MSG_FILAMENT_CHANGE_RESUME_1 "Warte auf das" #define MSG_FILAMENT_CHANGE_RESUME_2 "fortfahren des" #define MSG_FILAMENT_CHANGE_RESUME_3 "Druckes" #else // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_INIT_1 "Bitte warten..." #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Auswerfen..." #define MSG_FILAMENT_CHANGE_INSERT_1 "Laden und Klick" #define MSG_FILAMENT_CHANGE_LOAD_1 "Laden..." #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruden..." #define MSG_FILAMENT_CHANGE_RESUME_1 "Weitermachen..." #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_DE_H