#ifndef LANGUAGE_H #define LANGUAGE_H // NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES // // ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" // ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS // Languages // 1 English // 2 Polish // 3 French // 4 German // 5 Spanish // 6 Russian // 7 Italian // 8 Portuguese // 9 Finnish // 10 Aragonese // 11 Dutch // 12 Catalan #ifndef LANGUAGE_CHOICE #define LANGUAGE_CHOICE 1 // Pick your language from the list above #endif #define PROTOCOL_VERSION "1.0" #if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72 #define MACHINE_NAME "Ultimaker" #define FIRMWARE_URL "http://firmware.ultimaker.com" #elif MOTHERBOARD == 80 #define MACHINE_NAME "Rumba" #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/" #elif MOTHERBOARD == 77 #define MACHINE_NAME "3Drag" #define FIRMWARE_URL "http://3dprint.elettronicain.it/" #else #ifdef CUSTOM_MENDEL_NAME #define MACHINE_NAME CUSTOM_MENDEL_NAME #else #define MACHINE_NAME "Mendel" #endif // Default firmware set to Mendel #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/" #endif #ifndef MACHINE_UUID #define MACHINE_UUID "00000000-0000-0000-0000-000000000000" #endif #define STRINGIFY_(n) #n #define STRINGIFY(n) STRINGIFY_(n) // Common LCD messages /* nothing here as of yet */ // Common serial messages #define MSG_MARLIN "Marlin" #if LANGUAGE_CHOICE == 1 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " ready." #define MSG_SD_INSERTED "Card inserted" #define MSG_SD_REMOVED "Card removed" #define MSG_MAIN "Main" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Disable steppers" #define MSG_AUTO_HOME "Auto home" #define MSG_SET_ORIGIN "Set origin" #define MSG_PREHEAT_PLA "Preheat PLA" #define MSG_PREHEAT_PLA0 "Preheat PLA 1" #define MSG_PREHEAT_PLA1 "Preheat PLA 2" #define MSG_PREHEAT_PLA2 "Preheat PLA 3" #define MSG_PREHEAT_PLA012 "Preheat PLA All" #define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed" #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf" #define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_ABS0 "Preheat ABS 1" #define MSG_PREHEAT_ABS1 "Preheat ABS 2" #define MSG_PREHEAT_ABS2 "Preheat ABS 3" #define MSG_PREHEAT_ABS012 "Preheat ABS All" #define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf" #define MSG_COOLDOWN "Cooldown" #define MSG_SWITCH_PS_ON "Switch power on" #define MSG_SWITCH_PS_OFF "Switch power off" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Move axis" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Speed" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE2 "Nozzle3" #define MSG_BED "Bed" #define MSG_FAN_SPEED "Fan speed" #define MSG_FLOW "Flow" #define MSG_FLOW0 "Flow 0" #define MSG_FLOW1 "Flow 1" #define MSG_FLOW2 "Flow 2" #define MSG_CONTROL "Control" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Fact" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "On " #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract" #define MSG_XSTEPS "Xsteps/mm" #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" #define MSG_RECTRACT "Rectract" #define MSG_TEMPERATURE "Temperature" #define MSG_MOTION "Motion" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Store memory" #define MSG_LOAD_EPROM "Load memory" #define MSG_RESTORE_FAILSAFE "Restore failsafe" #define MSG_REFRESH "Refresh" #define MSG_WATCH "Info screen" #define MSG_PREPARE "Prepare" #define MSG_TUNE "Tune" #define MSG_PAUSE_PRINT "Pause print" #define MSG_RESUME_PRINT "Resume print" #define MSG_STOP_PRINT "Stop print" #define MSG_CARD_MENU "Print from SD" #define MSG_NO_CARD "No SD card" #define MSG_DWELL "Sleep..." #define MSG_USERWAIT "Wait for user..." #define MSG_RESUMING "Resuming print" #define MSG_NO_MOVE "No move." #define MSG_KILLED "KILLED. " #define MSG_STOPPED "STOPPED. " #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACTF "Retract F" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Init. SD card" #define MSG_CNG_SDCARD "Change SD card" #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" // Serial Console Messages #define MSG_Enqueing "enqueing \"" #define MSG_POWERUP "PowerUp" #define MSG_EXTERNAL_RESET " External Reset" #define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_SOFTWARE_RESET " Software Reset" #define MSG_AUTHOR " | Author: " #define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_FREE_MEMORY " Free Memory: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Done saving file." #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " #define MSG_FILE_PRINTED "Done printing file" #define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_END_FILE_LIST "End file list" #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder " #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder " #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_HEATING "Heating..." #define MSG_HEATING_COMPLETE "Heating done." #define MSG_BED_HEATING "Bed Heating." #define MSG_BED_DONE "Bed done." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Count X: " #define MSG_ERR_KILLED "Printer halted. kill() called!" #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" #define MSG_RESEND "Resend: " #define MSG_UNKNOWN_COMMAND "Unknown command: \"" #define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" #define MSG_SD_INIT_FAIL "SD init fail" #define MSG_SD_VOL_INIT_FAIL "volume.init failed" #define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_SD_FILE_OPENED "File opened: " #define MSG_SD_SIZE " Size: " #define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " #define MSG_STEPPER_TOO_HIGH "Steprate too high: " #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #endif #if LANGUAGE_CHOICE == 2 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " gotowy." #define MSG_SD_INSERTED "Karta wlozona" #define MSG_SD_REMOVED "Karta usunieta" #define MSG_MAIN "Menu glowne" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Wylacz silniki" #define MSG_AUTO_HOME "Auto. poz. zerowa" #define MSG_SET_ORIGIN "Ustaw punkt zero" #define MSG_PREHEAT_PLA "Rozgrzej PLA" #define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1" #define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2" #define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3" #define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko" #define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze" #define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA" #define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1" #define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2" #define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3" #define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko" #define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze" #define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS" #define MSG_COOLDOWN "Chlodzenie" #define MSG_SWITCH_PS_ON "Wlacz zasilacz" #define MSG_SWITCH_PS_OFF "Wylacz zasilacz" #define MSG_EXTRUDE "Ekstruzja" #define MSG_RETRACT "Cofanie" #define MSG_MOVE_AXIS "Ruch osi" #define MSG_MOVE_X "Przesun w X" #define MSG_MOVE_Y "Przesun w Y" #define MSG_MOVE_Z "Przesun w Z" #define MSG_MOVE_E "Ekstruzja (os E)" #define MSG_MOVE_01MM "Przesuwaj co .1mm" #define MSG_MOVE_1MM "Przesuwaj co 1mm" #define MSG_MOVE_10MM "Przesuwaj co 10mm" #define MSG_SPEED "Predkosc" #define MSG_NOZZLE "Dysza" #define MSG_NOZZLE1 "Dysza 2" #define MSG_NOZZLE2 "Dysza 3" #define MSG_BED "Loze" #define MSG_FAN_SPEED "Obroty wiatraka" #define MSG_FLOW "Przeplyw" #define MSG_FLOW0 "Przeplyw 0" #define MSG_FLOW1 "Przeplyw 1" #define MSG_FLOW2 "Przeplyw 2" #define MSG_CONTROL "Kontrola" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Mnoznik" #define MSG_AUTOTEMP "Auto. temperatura" #define MSG_ON "Wl. " #define MSG_OFF "Wyl." #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Przyspieszenie" #define MSG_VXY_JERK "Zryw Vxy" #define MSG_VZ_JERK "Zryw Vz" #define MSG_VE_JERK "Zryw Ve" #define MSG_VMAX "Vmax" #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "Vskok min" #define MSG_AMAX "Amax" #define MSG_A_RETRACT "A-wycofanie" #define MSG_XSTEPS "krokiX/mm" #define MSG_YSTEPS "krokiY/mm" #define MSG_ZSTEPS "krokiZ/mm" #define MSG_ESTEPS "krokiE/mm" #define MSG_RECTRACT "Wycofanie" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Ruch" #define MSG_CONTRAST "Kontrast LCD" #define MSG_STORE_EPROM "Zapisz w pamieci" #define MSG_LOAD_EPROM "Wczytaj z pamieci" #define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne" #define MSG_REFRESH "\004Odswiez" #define MSG_WATCH "Ekran glowny" #define MSG_PREPARE "Przygotuj" #define MSG_CONTROL "Ustawienia" #define MSG_TUNE "Strojenie" #define MSG_PAUSE_PRINT "Pauza" #define MSG_RESUME_PRINT "Wznowienie" #define MSG_STOP_PRINT "Stop" #define MSG_CARD_MENU "Menu karty SD" #define MSG_NO_CARD "Brak karty" #define MSG_DWELL "Uspij..." #define MSG_USERWAIT "Oczekiwanie..." #define MSG_RESUMING "Wznawianie druku" #define MSG_NO_MOVE "Brak ruchu" #define MSG_KILLED "Ubity. " #define MSG_STOPPED "Zatrzymany. " #define MSG_STEPPER_RELEASED "Zwolniony." #define MSG_CONTROL_RETRACT "Wycofaj mm" #define MSG_CONTROL_RETRACTF "Wycofaj F" #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" #define MSG_AUTORETRACT "Auto. wycofanie" #define MSG_FILAMENTCHANGE "Zmien filament" #define MSG_INIT_SDCARD "Inicjal. karty SD" #define MSG_CNG_SDCARD "Zmiana karty SD" #define MSG_ZPROBE_OUT "Sonda Z za lozem" #define MSG_POSITION_UNKNOWN "Wroc w XY przed Z" #define MSG_ZPROBE_ZOFFSET "Offset Z" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Blad wyl. kranc." #define MSG_CONTRAST "Kontrast" // Serial Console Messages #define MSG_Enqueing "Kolejkowanie \"" #define MSG_POWERUP "Zasilanie wlaczone" #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)" #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)" #define MSG_WATCHDOG_RESET " Reset (watchdog)" #define MSG_SOFTWARE_RESET " Reset (programowy)" #define MSG_AUTHOR " | Autor: " #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: " #define MSG_FREE_MEMORY " Wolna pamiec: " #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): " #define MSG_OK "OK" #define MSG_FILE_SAVED "Plik zapisany." #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:" #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: " #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:" #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku" #define MSG_BEGIN_FILE_LIST "Start listy plikow" #define MSG_END_FILE_LIST "Koniec listy plikow" #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder " #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder " #define MSG_M200_INVALID_EXTRUDER "M200 Niepoprawny ekstruder " #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder " #define MSG_M221_INVALID_EXTRUDER "M221 Niepoprawny ekstruder " #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :(" #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder " #define MSG_HEATING "Nagrzewanie ekstrudera..." #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone." #define MSG_BED_HEATING "Nagrzewanie loza..." #define MSG_BED_DONE "Nagrzewanie loza zakonczone." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Licznik X: " #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()" #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)" #define MSG_RESEND "Wyslij ponownie: " #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \"" #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: " #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych" #define MSG_ENDSTOP_HIT "Wyzwolony" #define MSG_ENDSTOP_OPEN "Otwarty" #define MSG_HOTEND_OFFSET "Offsety dysz:" #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu" #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD" #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu" #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego" #define MSG_SD_CARD_OK "Karta SD zainicjalizowana" #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego" #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: " #define MSG_SD_FILE_OPENED "Otwarto plik:" #define MSG_SD_SIZE " Rozmiar:" #define MSG_SD_FILE_SELECTED "Wybrano plik" #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: " #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt " #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD" #define MSG_SD_ERR_WRITE_TO_FILE "Wystapil blad podczas zapisu do pliku" #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: " #define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: " #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" #define MSG_BABYSTEPPING_X "Babystepping w osi X" #define MSG_BABYSTEPPING_Y "Babystepping w osi Y" #define MSG_BABYSTEPPING_Z "Babystepping w osi Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #endif #if LANGUAGE_CHOICE == 3 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " prete." #define MSG_SD_INSERTED "Carte inseree" #define MSG_SD_REMOVED "Carte retiree" #define MSG_MAIN "Menu principal" #define MSG_AUTOSTART "Demarrage auto" #define MSG_DISABLE_STEPPERS "Arreter moteurs" #define MSG_AUTO_HOME "Home auto." #define MSG_SET_ORIGIN "Regler origine" #define MSG_PREHEAT_PLA " Prechauffage PLA" #define MSG_PREHEAT_PLA0 "Prechauff. PLA 1" #define MSG_PREHEAT_PLA1 "Prechauff. PLA 2" #define MSG_PREHEAT_PLA2 "Prechauff. PLA 3" #define MSG_PREHEAT_PLA012 "Prech. PLA Tout" #define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau" #define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA" #define MSG_PREHEAT_ABS "Prechauffage ABS" #define MSG_PREHEAT_ABS0 "Prechauff. ABS 1" #define MSG_PREHEAT_ABS1 "Prechauff. ABS 2" #define MSG_PREHEAT_ABS2 "Prechauff. ABS 3" #define MSG_PREHEAT_ABS012 "Prech. ABS Tout" #define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau" #define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS" #define MSG_COOLDOWN "Refroidir" #define MSG_SWITCH_PS_ON "Allumer alim." #define MSG_SWITCH_PS_OFF "Eteindre alim." #define MSG_EXTRUDE "Extrusion" #define MSG_RETRACT "Retraction" #define MSG_PREHEAT_PLA "Prechauffage PLA" #define MSG_PREHEAT_ABS "Prechauffage ABS" #define MSG_MOVE_AXIS "Deplacer un axe" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED " Vitesse" #define MSG_NOZZLE "Buse" #define MSG_NOZZLE1 "Buse2" #define MSG_NOZZLE2 "Buse3" #define MSG_BED "Plateau" #define MSG_FAN_SPEED "Vite. ventilateur" #define MSG_FLOW "Flux" #define MSG_FLOW0 "Flux 0" #define MSG_FLOW1 "Flux 1" #define MSG_FLOW2 "Flux 2" #define MSG_CONTROL "Controler" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Facteur" #define MSG_AUTOTEMP "Temp. Auto." #define MSG_ON "Marche " #define MSG_OFF "Arret" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax" #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "Vdepl min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract" #define MSG_XSTEPS "Xpas/mm" #define MSG_YSTEPS "Ypas/mm" #define MSG_ZSTEPS "Zpas/mm" #define MSG_ESTEPS "Epas/mm" #define MSG_TEMPERATURE "Temperature" #define MSG_MOTION "Mouvement" #define MSG_CONTRAST "Contraste LCD" #define MSG_STORE_EPROM "Sauver config" #define MSG_LOAD_EPROM "Lire config" #define MSG_RESTORE_FAILSAFE "Restaurer defauts" #define MSG_REFRESH "Actualiser" #define MSG_WATCH "Surveiller" #define MSG_PREPARE "Preparer" #define MSG_TUNE "Regler" #define MSG_PAUSE_PRINT "Interrompre impr." #define MSG_RESUME_PRINT "Reprendre impr." #define MSG_STOP_PRINT "Arreter impr." #define MSG_CARD_MENU "Impr. depuis SD" #define MSG_NO_CARD "Pas de carte" #define MSG_DWELL "Repos..." #define MSG_USERWAIT "Atten. de l'util." #define MSG_RESUMING "Repri. de l'impr." #define MSG_NO_MOVE "Aucun mouvement." #define MSG_KILLED "MORT." #define MSG_STOPPED "STOPPE." #define MSG_STEPPER_RELEASED "RELACHE." #define MSG_CONTROL_RETRACT "Retraction mm" #define MSG_CONTROL_RETRACTF "Retraction F" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "Retract. Auto." #define MSG_FILAMENTCHANGE "Changer filament" #define MSG_INIT_SDCARD "Init. la carte SD" #define MSG_CNG_SDCARD "Changer de carte" #define MSG_ZPROBE_OUT "Z sonde exte. lit" #define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z" #define MSG_ZPROBE_ZOFFSET "Offset Z" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Butee abandon" #define MSG_CONTRAST "Contrast" // Serial Console Messages #define MSG_Enqueing "Mise en tampon \"" #define MSG_POWERUP "Allumage" #define MSG_EXTERNAL_RESET " RAZ Externe" #define MSG_BROWNOUT_RESET " RAZ defaut alim." #define MSG_WATCHDOG_RESET " RAZ Watchdog" #define MSG_SOFTWARE_RESET " RAZ logicielle" #define MSG_AUTHOR " | Auteur: " #define MSG_CONFIGURATION_VER " Derniere MaJ: " #define MSG_FREE_MEMORY " Memoire libre: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Fichier enregistre." #define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " #define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " #define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " #define MSG_FILE_PRINTED "Impression terminee" #define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" #define MSG_END_FILE_LIST "Fin de la liste de fichiers" #define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" #define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" #define MSG_M200_INVALID_EXTRUDER "M200 Extruder invalide" #define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" #define MSG_M221_INVALID_EXTRUDER "M221 Extruder invalide" #define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" #define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " #define MSG_HEATING "En chauffe..." #define MSG_HEATING_COMPLETE "Chauffe terminee." #define MSG_BED_HEATING "Chauffe du lit." #define MSG_BED_DONE "Chauffe du lit terminee." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Compteur X: " #define MSG_ERR_KILLED "Impression arretee. kill() appelee!" #define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" #define MSG_RESEND "Renvoie: " #define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" #define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " #define MSG_INVALID_EXTRUDER "Extrudeur invalide" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Affichage du status des fin de course" #define MSG_ENDSTOP_HIT "DECLENCHE" #define MSG_ENDSTOP_OPEN "OUVERT" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" #define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" #define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" #define MSG_SD_OPENROOT_FAIL "Echec openRoot" #define MSG_SD_CARD_OK "Carte SD Ok" #define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" #define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " #define MSG_SD_FILE_OPENED "Fichier ouvert: " #define MSG_SD_SIZE " Taille: " #define MSG_SD_FILE_SELECTED "Fichier selectionne" #define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " #define MSG_SD_PRINTING_BYTE "Octet impression SD " #define MSG_SD_NOT_PRINTING "Pas d'impression SD" #define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" #define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " #define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " #define MSG_ENDSTOPS_HIT "Fin de course atteint: " #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #endif #if LANGUAGE_CHOICE == 4 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " Bereit." #define MSG_SD_INSERTED "SDKarte erkannt" #define MSG_SD_REMOVED "SDKarte entfernt" #define MSG_MAIN "Hauptmenü" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Stepper abschalt." #define MSG_AUTO_HOME "Auto Nullpunkt" #define MSG_SET_ORIGIN "Setze Nullpunkt" #define MSG_PREHEAT_PLA "Vorwärmen PLA" #define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1" #define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2" #define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3" #define MSG_PREHEAT_PLA012 "Vorw. PLA Alle" #define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett" #define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein." #define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1" #define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2" #define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3" #define MSG_PREHEAT_ABS012 "Vorw. ABS Alle" #define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett" #define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein." #define MSG_COOLDOWN "Abkühlen" #define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Achsen bewegen" #define MSG_MOVE_X "X bewegen" #define MSG_MOVE_Y "Y bewegen" #define MSG_MOVE_Z "Z bewegen" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "0.1mm bewegen" #define MSG_MOVE_1MM "1mm bewegen" #define MSG_MOVE_10MM "10mm bewegen" #define MSG_SPEED "Geschw" #define MSG_NOZZLE "Düse" #define MSG_NOZZLE1 "Düse2" #define MSG_NOZZLE2 "Düse3" #define MSG_BED "Bett" #define MSG_FAN_SPEED "Lüftergeschw." #define MSG_FLOW "Fluss" #define MSG_FLOW0 "Fluss 0" #define MSG_FLOW1 "Fluss 1" #define MSG_FLOW2 "Fluss 2" #define MSG_CONTROL "Einstellungen" #define MSG_MIN "\002 Min" #define MSG_MAX "\002 Max" #define MSG_FACTOR "\002 Faktor" #define MSG_AUTOTEMP "AutoTemp" #define MSG_ON "Ein" #define MSG_OFF "Aus" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Acc" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-Retract" #define MSG_XSTEPS "Xsteps/mm" #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" #define MSG_RECTRACT_WIDE "Rectract" #define MSG_WATCH "Beobachten" #define MSG_TEMPERATURE "Temperatur" #define MSG_MOTION "Bewegung" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "EPROM speichern" #define MSG_LOAD_EPROM "EPROM laden" #define MSG_RESTORE_FAILSAFE "Standardkonfig." #define MSG_REFRESH "Aktualisieren" #define MSG_PREPARE "Vorbereitung" #define MSG_CONTROL "Einstellungen" #define MSG_TUNE "Justierung" #define MSG_PAUSE_PRINT "Druck anhalten" #define MSG_RESUME_PRINT "Druck fortsetz" #define MSG_STOP_PRINT "Druck stoppen" #define MSG_CARD_MENU "SDKarten Menü" #define MSG_NO_CARD "Keine SDKarte" #define MSG_DWELL "Warten..." #define MSG_USERWAIT "Warte auf Nutzer" #define MSG_RESUMING "Druck fortsetzung" #define MSG_NO_MOVE "Kein Zug." #define MSG_KILLED "KILLED" #define MSG_STOPPED "GESTOPPT" #define MSG_STEPPER_RELEASED "Stepper frei" #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACTF "Retract F" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Filament wechseln" #define MSG_INIT_SDCARD "Init. SD-Card" #define MSG_CNG_SDCARD "Change SD-Card" #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_CONTRAST "Contrast" // Serial Console Messages #define MSG_Enqueing "enqueing \"" #define MSG_POWERUP "PowerUp" #define MSG_EXTERNAL_RESET " External Reset" #define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_SOFTWARE_RESET " Software Reset" #define MSG_AUTHOR " | Author: " #define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_FREE_MEMORY " Free Memory: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Done saving file." #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" #define MSG_FILE_PRINTED "Done printing file" #define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_END_FILE_LIST "End file list" #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder " #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder " #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_HEATING "Heating..." #define MSG_HEATING_COMPLETE "Heating done." #define MSG_BED_HEATING "Bed Heating." #define MSG_BED_DONE "Bed done." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Count X:" #define MSG_ERR_KILLED "Printer halted. kill() called !!" #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" #define MSG_RESEND "Resend:" #define MSG_UNKNOWN_COMMAND "Unknown command:\"" #define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" #define MSG_SD_INIT_FAIL "SD init fail" #define MSG_SD_VOL_INIT_FAIL "volume.init failed" #define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_SD_FILE_OPENED "File opened:" #define MSG_SD_SIZE " Size:" #define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" #define MSG_STEPPER_TOO_HIGH "Steprate too high : " #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #endif #if LANGUAGE_CHOICE == 5 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " lista." #define MSG_SD_INSERTED "Tarjeta colocada" #define MSG_SD_REMOVED "Tarjeta retirada" #define MSG_MAIN "Menu principal" #define MSG_AUTOSTART " Autostart" #define MSG_DISABLE_STEPPERS "Apagar motores" #define MSG_AUTO_HOME "Llevar al origen" #define MSG_SET_ORIGIN "Establecer cero" #define MSG_PREHEAT_PLA "Precalentar PLA" #define MSG_PREHEAT_PLA0 "Precalentar PLA 1" #define MSG_PREHEAT_PLA1 "Precalentar PLA 2" #define MSG_PREHEAT_PLA2 "Precalentar PLA 3" #define MSG_PREHEAT_PLA012 "Precal. PLA Todo" #define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base" #define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" #define MSG_PREHEAT_ABS "Precalentar ABS" #define MSG_PREHEAT_ABS0 "Precalentar ABS 1" #define MSG_PREHEAT_ABS1 "Precalentar ABS 2" #define MSG_PREHEAT_ABS2 "Precalentar ABS 3" #define MSG_PREHEAT_ABS012 "Precal. ABS Todo" #define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base" #define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" #define MSG_COOLDOWN "Enfriar" #define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Extruir" #define MSG_RETRACT "Retraer" #define MSG_MOVE_AXIS "Mover ejes" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Velocidad" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE2 "Nozzle3" #define MSG_BED "Base" #define MSG_FAN_SPEED "Ventilador" #define MSG_FLOW "Flujo" #define MSG_FLOW0 "Flujo 0" #define MSG_FLOW1 "Flujo 1" #define MSG_FLOW2 "Flujo 2" #define MSG_CONTROL "Control" #define MSG_MIN "\002 Min" #define MSG_MAX "\002 Max" #define MSG_FACTOR "\002 Fact" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "On" #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Acel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax" #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax" #define MSG_A_RETRACT "A-retrac." #define MSG_XSTEPS "X pasos/mm" #define MSG_YSTEPS "Y pasos/mm" #define MSG_ZSTEPS "Z pasos/mm" #define MSG_ESTEPS "E pasos/mm" #define MSG_RECTRACT "Retraer" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimiento" #define MSG_STORE_EPROM "Guardar memoria" #define MSG_LOAD_EPROM "Cargar memoria" #define MSG_RESTORE_FAILSAFE "Rest. de emergen." #define MSG_REFRESH "Volver a cargar" #define MSG_WATCH "Monitorizar" #define MSG_PREPARE "Preparar" #define MSG_TUNE "Ajustar" #define MSG_PAUSE_PRINT "Pausar impresion" #define MSG_RESUME_PRINT "Reanudar impres." #define MSG_STOP_PRINT "Detener impresion" #define MSG_CARD_MENU "Menu de SD" #define MSG_NO_CARD "No hay tarjeta SD" #define MSG_DWELL "Reposo..." #define MSG_USERWAIT "Esperando ordenes" #define MSG_RESUMING "Resumiendo impre." #define MSG_NO_MOVE "Sin movimiento" #define MSG_KILLED "PARADA DE EMERG." #define MSG_STOPPED "PARADA" #define MSG_CONTROL_RETRACT "Retraer mm" #define MSG_CONTROL_RETRACTF "Retraer F" #define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Iniciando tarjeta" #define MSG_CNG_SDCARD "Cambiar tarjeta" #define MSG_RECTRACT_WIDE "Retraer" #define MSG_TEMPERATURE_WIDE "Temperatura" #define MSG_TEMPERATURE_RTN "Temperatura" #define MSG_MAIN_WIDE "Menu principal" #define MSG_MOTION_WIDE "Movimiento" #define MSG_PREPARE_ALT "Preparar" #define MSG_CONTROL_ARROW "Control" #define MSG_RETRACT_ARROW "Retraer" #define MSG_STEPPER_RELEASED "Desacoplada." #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_CONTRAST "Contrast" // Serial Console Messages #define MSG_Enqueing "En cola \"" #define MSG_POWERUP "PowerUp" #define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" #define MSG_WATCHDOG_RESET " Reset por Bloqueo" #define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_AUTHOR " | Autor: " #define MSG_CONFIGURATION_VER " Ultima actualizacion: " #define MSG_FREE_MEMORY " Memoria libre: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Guardado." #define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" #define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" #define MSG_FILE_PRINTED "Impresion terminada" #define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" #define MSG_END_FILE_LIST "Fin de la lista de archivos" #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " #define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido " #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " #define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalido " #define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " #define MSG_HEATING "Calentando..." #define MSG_HEATING_COMPLETE "Calentamiento Hecho." #define MSG_BED_HEATING "Calentando la base." #define MSG_BED_DONE "Base Caliente." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Cuenta X:" #define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" #define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" #define MSG_RESEND "Reenviar:" #define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " #define MSG_INVALID_EXTRUDER "Extrusor Invalido" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Comprobando fines de carrera." #define MSG_ENDSTOP_HIT "PULSADO" #define MSG_ENDSTOP_OPEN "abierto" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" #define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" #define MSG_SD_CARD_OK "Tarjeta SD OK" #define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" #define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " #define MSG_SD_FILE_OPENED "Archivo abierto:" #define MSG_SD_SIZE " Tamaño:" #define MSG_SD_FILE_SELECTED "Archivo Seleccionado" #define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " #define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " #define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" #define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" #define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" #define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #endif #if LANGUAGE_CHOICE == 6 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME "Готов." #define MSG_SD_INSERTED "Карта вставлена" #define MSG_SD_REMOVED "Карта извлечена" #define MSG_MAIN "Меню \003" #define MSG_AUTOSTART "Автостарт" #define MSG_DISABLE_STEPPERS "Выкл. двигатели" #define MSG_AUTO_HOME "Парковка" #define MSG_SET_ORIGIN "Запомнить ноль" #define MSG_PREHEAT_PLA "Преднагрев PLA" #define MSG_PREHEAT_PLA0 "Преднагрев PLA0" #define MSG_PREHEAT_PLA1 "Преднагрев PLA1" #define MSG_PREHEAT_PLA2 "Преднагрев PLA2" #define MSG_PREHEAT_PLA012 "Преднаг. PLA все" #define MSG_PREHEAT_PLA_BEDONLY "Пред. PLA Кровать" #define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA" #define MSG_PREHEAT_ABS "Преднагрев ABS" #define MSG_PREHEAT_ABS0 "Преднагрев ABS0" #define MSG_PREHEAT_ABS1 "Преднагрев ABS1" #define MSG_PREHEAT_ABS2 "Преднагрев ABS2" #define MSG_PREHEAT_ABS012 "Преднаг. ABS все " #define MSG_PREHEAT_ABS_BEDONLY "Пред. ABS Кровать" #define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS" #define MSG_COOLDOWN "Охлаждение" #define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Экструзия" #define MSG_RETRACT "Откат" #define MSG_MOVE_AXIS "Движение по осям" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Скорость:" #define MSG_NOZZLE "\002 Фильера:" #define MSG_NOZZLE1 "\002 Фильера2:" #define MSG_NOZZLE2 "\002 Фильера3:" #define MSG_BED "\002 Кровать:" #define MSG_FAN_SPEED "Куллер:" #define MSG_FLOW "Поток:" #define MSG_FLOW0 " Поток0:" #define MSG_FLOW1 " Поток1:" #define MSG_FLOW2 " Поток2:" #define MSG_CONTROL "Настройки \003" #define MSG_MIN "\002 Минимум:" #define MSG_MAX "\002 Максимум:" #define MSG_FACTOR "\002 Фактор:" #define MSG_AUTOTEMP "Autotemp:" #define MSG_ON "Вкл. " #define MSG_OFF "Выкл. " #define MSG_PID_P "PID-P: " #define MSG_PID_I "PID-I: " #define MSG_PID_D "PID-D: " #define MSG_PID_C "PID-C: " #define MSG_ACC "Acc:" #define MSG_VXY_JERK "Vxy-jerk: " #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "x:" #define MSG_Y "y:" #define MSG_Z "z:" #define MSG_E "e:" #define MSG_VMIN "Vmin:" #define MSG_VTRAV_MIN "VTrav min:" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract:" #define MSG_XSTEPS "X шаг/mm:" #define MSG_YSTEPS "Y шаг/mm:" #define MSG_ZSTEPS "Z шаг/mm:" #define MSG_ESTEPS "E шаг/mm:" #define MSG_RECTRACT "Откат подачи \x7E" #define MSG_TEMPERATURE "Температура \x7E" #define MSG_MOTION "Скорости \x7E" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Сохранить в EPROM" #define MSG_LOAD_EPROM "Загруз. из EPROM" #define MSG_RESTORE_FAILSAFE "Сброс настроек" #define MSG_REFRESH "\004Обновить" #define MSG_WATCH "Обзор \003" #define MSG_PREPARE "Действия \x7E" #define MSG_TUNE "Настройки \x7E" #define MSG_PAUSE_PRINT "Продолжить печать" #define MSG_RESUME_PRINT "возобн. печать" #define MSG_STOP_PRINT "Остановить печать" #define MSG_CARD_MENU "Меню карты \x7E" #define MSG_NO_CARD "Нет карты" #define MSG_DWELL "Сон..." #define MSG_USERWAIT "Ожиданиие" #define MSG_RESUMING "Resuming print" #define MSG_NO_MOVE "Нет движения." #define MSG_KILLED "УБИТО." #define MSG_STOPPED "ОСТАНОВЛЕНО." #define MSG_CONTROL_RETRACT "Откат mm:" #define MSG_CONTROL_RETRACTF "Откат F:" #define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm:" #define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm:" #define MSG_CONTROL_RETRACT_RECOVERF "Возврат F:" #define MSG_AUTORETRACT "АвтоОткат:" #define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Init. SD-Card" #define MSG_CNG_SDCARD "Change SD-Card" #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_CONTRAST "Contrast" // Serial Console Messages #define MSG_Enqueing "Запланировано \"" #define MSG_POWERUP "Включение питания" #define MSG_EXTERNAL_RESET " Внешний сброс" #define MSG_BROWNOUT_RESET " Brown out сброс" #define MSG_WATCHDOG_RESET " Watchdog сброс" #define MSG_SOFTWARE_RESET " программный сброс" #define MSG_AUTHOR " | Автор: " #define MSG_CONFIGURATION_VER " Последнее обновление: " #define MSG_FREE_MEMORY " Памяти свободно: " #define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Файл записан." #define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" #define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" #define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" #define MSG_FILE_PRINTED "Печать файла завершена" #define MSG_BEGIN_FILE_LIST "Список файлов" #define MSG_END_FILE_LIST "Конец списка файлов" #define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " #define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " #define MSG_M200_INVALID_EXTRUDER "M200 ошибка экструдера " #define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " #define MSG_M221_INVALID_EXTRUDER "M221 ошибка экструдера " #define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" #define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " #define MSG_HEATING "Нагрев... " #define MSG_HEATING_COMPLETE "Наргето. " #define MSG_BED_HEATING "Нагрев стола... " #define MSG_BED_DONE "Стол нагрет. " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Count X:" #define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" #define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" #define MSG_RESEND "Переотправка:" #define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" #define MSG_ACTIVE_EXTRUDER "Активный экструдер: " #define MSG_INVALID_EXTRUDER "Ошибка экструдера" #define MSG_X_MIN "x_min:" #define MSG_X_MAX "x_max:" #define MSG_Y_MIN "y_min:" #define MSG_Y_MAX "y_max:" #define MSG_Z_MIN "z_min:" #define MSG_Z_MAX "z_max:" #define MSG_M119_REPORT "Статус концевиков" #define MSG_ENDSTOP_HIT "Срабатывание концевика" #define MSG_ENDSTOP_OPEN "Концевик освобожден" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" #define MSG_SD_INIT_FAIL "Ошибка инициализации SD" #define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" #define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" #define MSG_SD_CARD_OK "SD карта в порядке" #define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" #define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " #define MSG_SD_FILE_OPENED "Файл открыт:" #define MSG_SD_SIZE " Размер:" #define MSG_SD_FILE_SELECTED "Файл выбран" #define MSG_SD_WRITE_TO_FILE "Запись в файл: " #define MSG_SD_PRINTING_BYTE "SD печать byte " #define MSG_SD_NOT_PRINTING "нет SD печати" #define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" #define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" #define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " #define MSG_ENDSTOPS_HIT "концевик сработал: " #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #endif #if LANGUAGE_CHOICE == 7 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " pronto." #define MSG_SD_INSERTED "SD Card inserita" #define MSG_SD_REMOVED "SD Card rimossa" #define MSG_MAIN "Menu principale" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Disabilita Motori" #define MSG_AUTO_HOME "Auto Home" #define MSG_SET_ORIGIN "Imposta Origine" #define MSG_PREHEAT_PLA "Preriscalda PLA" #define MSG_PREHEAT_PLA0 "Preriscalda PLA 1" #define MSG_PREHEAT_PLA1 "Preriscalda PLA 2" #define MSG_PREHEAT_PLA2 "Preriscalda PLA 3" #define MSG_PREHEAT_PLA012 "Preris. PLA Tutto" #define MSG_PREHEAT_PLA_BEDONLY "Preri. PLA Piatto" #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf" #define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_PREHEAT_ABS0 "Preriscalda ABS 1" #define MSG_PREHEAT_ABS1 "Preriscalda ABS 2" #define MSG_PREHEAT_ABS2 "Preriscalda ABS 3" #define MSG_PREHEAT_ABS012 "Preris. ABS Tutto" #define MSG_PREHEAT_ABS_BEDONLY "Preri. ABS Piatto" #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" #define MSG_COOLDOWN "Raffredda" #define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Estrudi" #define MSG_RETRACT "Ritrai" #define MSG_MOVE_AXIS "Muovi Asse" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Velcità" #define MSG_NOZZLE "Ugello" #define MSG_NOZZLE1 "Ugello2" #define MSG_NOZZLE2 "Ugello3" #define MSG_BED "Piatto" #define MSG_FAN_SPEED "Ventola" #define MSG_FLOW "Flusso" #define MSG_FLOW0 "Flusso 0" #define MSG_FLOW1 "Flusso 1" #define MSG_FLOW2 "Flusso 2" #define MSG_CONTROL "Controllo" #define MSG_MIN " \002 Min:" #define MSG_MAX " \002 Max:" #define MSG_FACTOR " \002 Fact:" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "On " #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax" #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax" #define MSG_A_RETRACT "A-retract" #define MSG_XSTEPS "Xpassi/mm" #define MSG_YSTEPS "Ypassi/mm" #define MSG_ZSTEPS "Zpassi/mm" #define MSG_ESTEPS "Epassi/mm" #define MSG_RECTRACT "Ritrai" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimento" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Salva in EEPROM" #define MSG_LOAD_EPROM "Carica da EEPROM" #define MSG_RESTORE_FAILSAFE "Impostaz. default" #define MSG_REFRESH "Aggiorna" #define MSG_WATCH "Guarda" #define MSG_PREPARE "Prepara" #define MSG_TUNE "Adatta" #define MSG_PAUSE_PRINT "Pausa" #define MSG_RESUME_PRINT "Riprendi Stampa" #define MSG_STOP_PRINT "Arresta Stampa" #define MSG_CARD_MENU "SD Card Menu" #define MSG_NO_CARD "No SD Card" #define MSG_DWELL "Sospensione..." #define MSG_USERWAIT "Attendi Utente..." #define MSG_RESUMING "Riprendi Stampa" #define MSG_NO_MOVE "Nessun Movimento." #define MSG_KILLED "UCCISO. " #define MSG_STOPPED "ARRESTATO. " #define MSG_CONTROL_RETRACT "Ritrai mm" #define MSG_CONTROL_RETRACTF "Ritrai F" #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "AutoArretramento" #define MSG_FILAMENTCHANGE "Cambia filamento" #define MSG_INIT_SDCARD "Iniz. SD-Card" #define MSG_CNG_SDCARD "Cambia SD-Card" #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_CONTRAST "Contrast" // Serial Console Messages #define MSG_Enqueing "accodamento \"" #define MSG_POWERUP "Accensione" #define MSG_EXTERNAL_RESET " Reset Esterno" #define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_SOFTWARE_RESET " Software Reset" #define MSG_AUTHOR " | Autore: " #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: " #define MSG_FREE_MEMORY " Memoria Libera: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "File Salvato." #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: " #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: " #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: " #define MSG_FILE_PRINTED "File stampato" #define MSG_BEGIN_FILE_LIST "Inizio Lista File" #define MSG_END_FILE_LIST "Fine Lista File" #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido " #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido " #define MSG_M200_INVALID_EXTRUDER "M200 Estrusore non valido " #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido " #define MSG_M221_INVALID_EXTRUDER "M221 Estrusore non valido " #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura" #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido " #define MSG_HEATING "Riscaldamento..." #define MSG_HEATING_COMPLETE "Stampante Calda." #define MSG_BED_HEATING "Riscaldamento Piatto." #define MSG_BED_DONE "Piatto Pronto." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Calcola X: " #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!" #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)" #define MSG_RESEND "Reinviato:" #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \"" #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: " #define MSG_INVALID_EXTRUDER "Estrusore non valido" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Segnalazione stato degli endstop" #define MSG_ENDSTOP_HIT "INNESCATO" #define MSG_ENDSTOP_OPEN "aperto" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella" #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD" #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume" #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale" #define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro" #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: " #define MSG_SD_FILE_OPENED "File aperto: " #define MSG_SD_SIZE " Dimensione: " #define MSG_SD_FILE_SELECTED "File selezionato" #define MSG_SD_WRITE_TO_FILE "Scrittura su file: " #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD " #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD" #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file" #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: " #define MSG_STEPPER_TOO_HIGH "Steprate troppo alto: " #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure." #endif #if LANGUAGE_CHOICE == 8 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " pronto." #define MSG_SD_INSERTED "Cartao inserido" #define MSG_SD_REMOVED "Cartao removido" #define MSG_MAIN " Menu principal \003" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS " Apagar motores" #define MSG_AUTO_HOME "Ir para origen" #define MSG_SET_ORIGIN "Estabelecer orig." #define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1" #define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2" #define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3" #define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo" #define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base" #define MSG_PREHEAT_PLA_SETTINGS "PLA setting" #define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1" #define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2" #define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3" #define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo" #define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base" #define MSG_PREHEAT_ABS_SETTINGS "ABS setting" #define MSG_COOLDOWN "Esfriar" #define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Extrudar" #define MSG_RETRACT "Retrair" #define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_MOVE_AXIS "Mover eixo \x7E" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Velocidade:" #define MSG_NOZZLE "\002Nozzle:" #define MSG_NOZZLE1 "\002Nozzle2:" #define MSG_NOZZLE2 "\002Nozzle3:" #define MSG_BED "\002Base:" #define MSG_FAN_SPEED "Velocidade vento." #define MSG_FLOW "Fluxo:" #define MSG_FLOW0 "Fluxo0:" #define MSG_FLOW1 "Fluxo1:" #define MSG_FLOW2 "Fluxo2:" #define MSG_CONTROL "Controle \003" #define MSG_MIN "\002 Min:" #define MSG_MAX "\002 Max:" #define MSG_FACTOR "\002 Fact:" #define MSG_AUTOTEMP "Autotemp:" #define MSG_ON "On " #define MSG_OFF "Off" #define MSG_PID_P "PID-P: " #define MSG_PID_I "PID-I: " #define MSG_PID_D "PID-D: " #define MSG_PID_C "PID-C: " #define MSG_ACC "Acc:" #define MSG_VXY_JERK "Vxy-jerk: " #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX " Vmax " #define MSG_X "x:" #define MSG_Y "y:" #define MSG_Z "z:" #define MSG_E "e:" #define MSG_VMIN "Vmin:" #define MSG_VTRAV_MIN "VTrav min:" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract:" #define MSG_XSTEPS "Xpasso/mm:" #define MSG_YSTEPS "Ypasso/mm:" #define MSG_ZSTEPS "Zpasso/mm:" #define MSG_ESTEPS "Epasso/mm:" #define MSG_MAIN_WIDE "Menu Principal \003" #define MSG_RECTRACT "Retrair" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimento" #define MSG_STORE_EPROM "Guardar memoria" #define MSG_LOAD_EPROM "Carregar memoria" #define MSG_RESTORE_FAILSAFE "Rest. de emergen." #define MSG_REFRESH "\004Recarregar" #define MSG_WATCH "Monitorar \003" #define MSG_PREPARE "Preparar \x7E" #define MSG_PREPARE_ALT "Preparar \003" #define MSG_CONTROL_ARROW "Controle \x7E" #define MSG_RETRACT_ARROW "Retrair \x7E" #define MSG_TUNE "Tune \x7E" #define MSG_PAUSE_PRINT "Pausar impressao" #define MSG_RESUME_PRINT "Resumir impressao" #define MSG_STOP_PRINT "Parar impressao" #define MSG_CARD_MENU "Menu cartao SD" #define MSG_NO_CARD "Sem cartao SD" #define MSG_DWELL "Repouso..." #define MSG_USERWAIT "Esperando ordem" #define MSG_RESUMING "Resuming print" #define MSG_NO_MOVE "Sem movimento" #define MSG_KILLED "PARADA DE EMERG." #define MSG_STOPPED "PARADA. " #define MSG_STEPPER_RELEASED "Lancado." #define MSG_CONTROL_RETRACT " Retrair mm:" #define MSG_CONTROL_RETRACTF " Retrair F:" #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" #define MSG_AUTORETRACT " AutoRetr.:" #define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Init. SD-Card" #define MSG_CNG_SDCARD "Change SD-Card" #define MSG_ZPROBE_OUT "Son. fora da mesa" #define MSG_POSITION_UNKNOWN "XY antes de Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_CONTRAST "Contrast" // Serial Console Messages #define MSG_Enqueing "enqueing \"" #define MSG_POWERUP "PowerUp" #define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta" #define MSG_WATCHDOG_RESET " Reset por Bloqueio" #define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_AUTHOR " | Author: " #define MSG_CONFIGURATION_VER " Ultima atualizacao: " #define MSG_FREE_MEMORY " memoria Livre: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Guardado." #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:" #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:" #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:" #define MSG_FILE_PRINTED "Impressao terminada" #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos" #define MSG_END_FILE_LIST "Fim da lista de arquivos" #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido " #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido " #define MSG_M200_INVALID_EXTRUDER "M200 Extrusor inválido " #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido " #define MSG_M221_INVALID_EXTRUDER "M221 Extrusor inválido " #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp" #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido " #define MSG_HEATING "Aquecendo..." #define MSG_HEATING_COMPLETE "Aquecido." #define MSG_BED_HEATING "Aquecendo a Base." #define MSG_BED_DONE "Base quente." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Conta X:" #define MSG_ERR_KILLED "Impressora parada com kill() !!" #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)" #define MSG_RESEND "Reenviar:" #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\"" #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: " #define MSG_INVALID_EXTRUDER "Extrusor invalido" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Relatando estado do ponto final" #define MSG_ENDSTOP_HIT "PULSADO" #define MSG_ENDSTOP_OPEN "Aberto" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio" #define MSG_SD_INIT_FAIL "Falha ao iniciar SD" #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume" #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz" #define MSG_SD_CARD_OK "cartao SD ok" #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho" #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: " #define MSG_SD_FILE_OPENED "Arquivo aberto:" #define MSG_SD_SIZE " Size:" #define MSG_SD_FILE_SELECTED "Arquivo selecionado" #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: " #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte " #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD" #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo" #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:" #define MSG_STEPPER_TOO_HIGH "Steprate muito alto : " #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." #endif #if LANGUAGE_CHOICE == 9 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " valmis." #define MSG_SD_INSERTED "Kortti asetettu" #define MSG_SD_REMOVED "Kortti poistettu" #define MSG_MAIN "Palaa" #define MSG_AUTOSTART "Automaatti" #define MSG_DISABLE_STEPPERS "Vapauta moottorit" #define MSG_AUTO_HOME "Aja referenssiin" #define MSG_SET_ORIGIN "Aseta origo" #define MSG_PREHEAT_PLA "Esilammita PLA" #define MSG_PREHEAT_PLA0 "Esilammita PLA 1" #define MSG_PREHEAT_PLA1 "Esilammita PLA 2" #define MSG_PREHEAT_PLA2 "Esilammita PLA 3" #define MSG_PREHEAT_PLA012 "Esila. PLA Kaikki" #define MSG_PREHEAT_PLA_BEDONLY "Esila. PLA Alusta" #define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf" #define MSG_PREHEAT_ABS "Esilammita ABS" #define MSG_PREHEAT_ABS0 "Esilammita ABS 1" #define MSG_PREHEAT_ABS1 "Esilammita ABS 2" #define MSG_PREHEAT_ABS2 "Esilammita ABS 3" #define MSG_PREHEAT_ABS012 "Esila. ABS Kaikki" #define MSG_PREHEAT_ABS_BEDONLY "Esila. ABS Alusta" #define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf" #define MSG_COOLDOWN "Jaahdyta" #define MSG_SWITCH_PS_ON "Virta paalle" #define MSG_SWITCH_PS_OFF "Virta pois" #define MSG_EXTRUDE "Pursota" #define MSG_RETRACT "Veda takaisin" #define MSG_MOVE_AXIS "Liikuta akseleita" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Nopeus" #define MSG_NOZZLE "Suutin" #define MSG_NOZZLE1 "Suutin2" #define MSG_NOZZLE2 "Suutin3" #define MSG_BED "Alusta" #define MSG_FAN_SPEED "Tuul. nopeus" #define MSG_FLOW "Virtaus" #define MSG_FLOW0 "Virtaus 0" #define MSG_FLOW1 "Virtaus 1" #define MSG_FLOW2 "Virtaus 2" #define MSG_CONTROL "Kontrolli" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Kerr" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "On " #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Kiihtyv" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VLiike min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-peruuta" #define MSG_XSTEPS "Xsteps/mm" #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" #define MSG_RECTRACT "Veda takaisin" #define MSG_TEMPERATURE "Lampotila" #define MSG_MOTION "Liike" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Tallenna muistiin" #define MSG_LOAD_EPROM "Lataa muistista" #define MSG_RESTORE_FAILSAFE "Palauta oletus" #define MSG_REFRESH "Paivita" #define MSG_WATCH "Seuraa" #define MSG_PREPARE "Valmistele" #define MSG_TUNE "Saada" #define MSG_PAUSE_PRINT "Keskeyta tulostus" #define MSG_RESUME_PRINT "Jatka tulostusta" #define MSG_STOP_PRINT "Pysayta tulostus" #define MSG_CARD_MENU "Korttivalikko" #define MSG_NO_CARD "Ei korttia" #define MSG_DWELL "Nukkumassa..." #define MSG_USERWAIT "Odotet. valintaa" #define MSG_RESUMING "Jatke. tulostusta" #define MSG_NO_MOVE "Ei liiketta." #define MSG_KILLED "KILLED. " #define MSG_STOPPED "STOPPED. " #define MSG_CONTROL_RETRACT "Veda mm" #define MSG_CONTROL_RETRACTF "Veda F" #define MSG_CONTROL_RETRACT_ZLIFT "Z mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "AutoVeto." #define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Init. SD-Card" #define MSG_CNG_SDCARD "Change SD-Card" #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" // Serial Console Messages #define MSG_Enqueing "jonoon \"" #define MSG_POWERUP "Kaynnistys" #define MSG_EXTERNAL_RESET " Ulkoinen Reset" #define MSG_BROWNOUT_RESET " Alajannite Reset" #define MSG_WATCHDOG_RESET " Vahtikoira Reset" #define MSG_SOFTWARE_RESET " Ohjelmisto Reset" #define MSG_AUTHOR " | Author: " #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: " #define MSG_FREE_MEMORY " Vapaata muistia: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Tiedosto tallennettu." #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: " #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: " #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: " #define MSG_FILE_PRINTED "Tiedoston tulostus valmis" #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku" #define MSG_END_FILE_LIST "Tiedostolistauksen loppu" #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin " #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin " #define MSG_M200_INVALID_EXTRUDER "M200 Virheellinen suutin " #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin " #define MSG_M221_INVALID_EXTRUDER "M221 Virheellinen suutin " #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja" #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin " #define MSG_HEATING "Lammitan..." #define MSG_HEATING_COMPLETE "Lammitys valmis." #define MSG_BED_HEATING "Alusta lampiaa." #define MSG_BED_DONE "Alusta valmis." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Laskuri X: " #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!" #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)" #define MSG_RESEND "Uudelleenlahetys: " #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \"" #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: " #define MSG_INVALID_EXTRUDER "Virheellinen suutin" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Rajakytkimien tilaraportti" #define MSG_ENDSTOP_HIT "AKTIIVISENA" #define MSG_ENDSTOP_OPEN "avoinna" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata" #define MSG_SD_INIT_FAIL "SD alustus epaonnistui" #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui" #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui" #define MSG_SD_CARD_OK "SD kortti ok" #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui" #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: " #define MSG_SD_FILE_OPENED "Tiedosto avattu: " #define MSG_SD_SIZE " Koko: " #define MSG_SD_FILE_SELECTED "Tiedosto valittu" #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: " #define MSG_SD_PRINTING_BYTE "SD tulostus byte " #define MSG_SD_NOT_PRINTING "Ei SD tulostus" #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon" #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: " #define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: " #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_CONTRAST "Kontrasti" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Virhe valikon rakenteessa" #endif #if LANGUAGE_CHOICE == 10 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " parada." #define MSG_SD_INSERTED "Tarcheta colocada" #define MSG_SD_REMOVED "Tarcheta retirada" #define MSG_MAIN "Menu prencipal" #define MSG_AUTOSTART " Autostart" #define MSG_DISABLE_STEPPERS "Amortar motors" #define MSG_AUTO_HOME "Levar a l'orichen" #define MSG_SET_ORIGIN "Establir zero" #define MSG_PREHEAT_PLA "Precalentar PLA" #define MSG_PREHEAT_PLA0 "Precalentar PLA0" #define MSG_PREHEAT_PLA1 "Precalentar PLA1" #define MSG_PREHEAT_PLA2 "Precalentar PLA2" #define MSG_PREHEAT_PLA012 "Precalentar PLA a" #define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base" #define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA" #define MSG_PREHEAT_ABS "Precalentar ABS" #define MSG_PREHEAT_ABS0 "Precalentar ABS0" #define MSG_PREHEAT_ABS1 "Precalentar ABS1" #define MSG_PREHEAT_ABS2 "Precalentar ABS2" #define MSG_PREHEAT_ABS012 "Precalentar ABS a" #define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base" #define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS" #define MSG_COOLDOWN "Enfriar" #define MSG_SWITCH_PS_ON "Enchegar Fuent" #define MSG_SWITCH_PS_OFF "Desenchegar Fuent" #define MSG_EXTRUDE "Extruir" #define MSG_RETRACT "Retraer" #define MSG_MOVE_AXIS "Mover Eixes" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Velocidat" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE2 "Nozzle3" #define MSG_BED "Base" #define MSG_FAN_SPEED "Ixoriador" #define MSG_FLOW "Fluxo" #define MSG_FLOW0 "Fluxo 0" #define MSG_FLOW1 "Fluxo 1" #define MSG_FLOW2 "Fluxo 2" #define MSG_CONTROL "Control" #define MSG_MIN "\002 Min" #define MSG_MAX "\002 Max" #define MSG_FACTOR "\002 Fact" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "On" #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Acel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ves-jerk" #define MSG_VMAX "Vmax" #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "y" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax" #define MSG_A_RETRACT "A-retrac." #define MSG_XSTEPS "X trangos/mm" #define MSG_YSTEPS "Y trangos/mm" #define MSG_ZSTEPS "Z trangos/mm" #define MSG_ESTEPS "E trangos/mm" #define MSG_RECTRACT "Retraer" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimiento" #define MSG_STORE_EPROM "Alzar Memoria" #define MSG_LOAD_EPROM "Cargar Memoria" #define MSG_RESTORE_FAILSAFE "Rest. d'emerchen." #define MSG_REFRESH "Tornar a cargar" #define MSG_WATCH "Monitorizar" #define MSG_PREPARE "Preparar" #define MSG_TUNE "Achustar" #define MSG_PAUSE_PRINT "Pausar impresion" #define MSG_RESUME_PRINT "Contin. impresion" #define MSG_STOP_PRINT "Detener Impresion" #define MSG_CARD_MENU "Menu de SD" #define MSG_NO_CARD "No i hai tarcheta" #define MSG_DWELL "Reposo..." #define MSG_USERWAIT "Asperan. ordines" #define MSG_RESUMING "Contin. impresion" #define MSG_NO_MOVE "Sin movimiento" #define MSG_KILLED "ATURADA D'EMERCH." #define MSG_STOPPED "ATURADA." #define MSG_CONTROL_RETRACT "Retraer mm" #define MSG_CONTROL_RETRACTF "Retraer F" #define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm" #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Cambear" #define MSG_INIT_SDCARD "Encetan. tarcheta" #define MSG_CNG_SDCARD "Cambiar tarcheta" #define MSG_RECTRACT_WIDE "Retraer" #define MSG_TEMPERATURE_WIDE "Temperatura" #define MSG_TEMPERATURE_RTN "Temperatura" #define MSG_MAIN_WIDE "Menu Prencipal" #define MSG_MOTION_WIDE "Movimiento" #define MSG_PREPARE_ALT "Preparar" #define MSG_CONTROL_ARROW "Control" #define MSG_RETRACT_ARROW "Retraer" #define MSG_STEPPER_RELEASED "Desacoplada." #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_CONTRAST "Contrast" // Serial Console Messages #define MSG_Enqueing "En coda \"" #define MSG_POWERUP "PowerUp" #define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" #define MSG_WATCHDOG_RESET " Reset por Bloqueo" #define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_AUTHOR " | Autor: " #define MSG_CONFIGURATION_VER " Zaguer esvielle: " #define MSG_FREE_MEMORY " Memoria libre: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Guardau." #define MSG_ERR_LINE_NO "O Numero de Linea no ye igual a l'Ultimo Numero de Linea+1, Ultima Linea:" #define MSG_ERR_CHECKSUM_MISMATCH "o checksum no coincide, Ultima Linea:" #define MSG_ERR_NO_CHECKSUM "No se podió trobar o Checksum con o numero de linea, Ultima Linea:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se trobo o Numero de Linea con o Checksum, Ultima Linea:" #define MSG_FILE_PRINTED "Impresion rematada" #define MSG_BEGIN_FILE_LIST "Prencipio d'a lista de fichero" #define MSG_END_FILE_LIST "Fin d'a lista de fichero" #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " #define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido " #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " #define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalido " #define MSG_ERR_NO_THERMISTORS "No i hai termistores - no temp" #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " #define MSG_HEATING "Calentando..." #define MSG_HEATING_COMPLETE "Calentamiento Feito." #define MSG_BED_HEATING "Calentando la base." #define MSG_BED_DONE "Base Calient." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Cuenta X:" #define MSG_ERR_KILLED "Impresora Aturada con kill()!!" #define MSG_ERR_STOPPED "Impresora aturada por errors. Apanye a error y use M999 Ta reiniciar!. (a temperatura se reestablece. Ajustela antes de continar)" #define MSG_RESEND "Reninviar:" #define MSG_UNKNOWN_COMMAND "Comando Desconoixiu:\"" #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " #define MSG_INVALID_EXTRUDER "Extrusor Invalido" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Comprobando fins de corrida." #define MSG_ENDSTOP_HIT "PULSAU" #define MSG_ENDSTOP_OPEN "ubierto" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "No se podió ubrir a subcarpeta." #define MSG_SD_INIT_FAIL "Fallo en encetar a SD" #define MSG_SD_VOL_INIT_FAIL "Fallo en amontar o volumen" #define MSG_SD_OPENROOT_FAIL "Fallo en ubrir a carpeta raiz" #define MSG_SD_CARD_OK "Tarcheta SD OK" #define MSG_SD_WORKDIR_FAIL "Fallo en ubrir a carpeta de treballo" #define MSG_SD_OPEN_FILE_FAIL "Error en ubrir, Fichero: " #define MSG_SD_FILE_OPENED "Fichero ubierto:" #define MSG_SD_SIZE " Grandaria:" #define MSG_SD_FILE_SELECTED "Fichero Seleccionau" #define MSG_SD_WRITE_TO_FILE "Escribindo en o fichero: " #define MSG_SD_PRINTING_BYTE "SD imprentando o byte " #define MSG_SD_NOT_PRINTING "No se ye imprentando con SD" #define MSG_SD_ERR_WRITE_TO_FILE "Error en escribir en o fichero" #define MSG_SD_CANT_ENTER_SUBDIR "No se puede ubrir a carpeta:" #define MSG_STEPPER_TOO_HIGH "Steprate masiau alto : " #define MSG_ENDSTOPS_HIT "S'ha tocau a fin de carril: " #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria privada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion masiau larga privada" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #endif #if LANGUAGE_CHOICE == 11 //Dutch // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " gereed." #define MSG_SD_INSERTED "Kaart ingestoken" #define MSG_SD_REMOVED "Kaart verwijderd" #define MSG_MAIN "Main" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Motoren uit" #define MSG_AUTO_HOME "Auto home" #define MSG_SET_ORIGIN "Nulpunt instellen" #define MSG_PREHEAT_PLA "PLA voorverwarmen" #define MSG_PREHEAT_PLA0 "PLA voorverw. 0" #define MSG_PREHEAT_PLA1 "PLA voorverw. 1" #define MSG_PREHEAT_PLA2 "PLA voorverw. 2" #define MSG_PREHEAT_PLA012 "PLA voorverw. aan" #define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed" #define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf" #define MSG_PREHEAT_ABS "ABS voorverwarmen" #define MSG_PREHEAT_ABS0 "ABS voorverw. 0" #define MSG_PREHEAT_ABS1 "ABS voorverw. 1" #define MSG_PREHEAT_ABS2 "ABS voorverw. 2" #define MSG_PREHEAT_ABS012 "ABS voorverw. aan" #define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed" #define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf" #define MSG_COOLDOWN "Afkoelen" #define MSG_SWITCH_PS_ON "Stroom aan" #define MSG_SWITCH_PS_OFF "Stroom uit" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "As verplaatsen" #define MSG_MOVE_X "Verplaats X" #define MSG_MOVE_Y "Verplaats Y" #define MSG_MOVE_Z "Verplaats Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Verplaats 0.1mm" #define MSG_MOVE_1MM "Verplaats 1mm" #define MSG_MOVE_10MM "Verplaats 10mm" #define MSG_SPEED "Snelheid" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE2 "Nozzle3" #define MSG_BED "Bed" #define MSG_FAN_SPEED "Fan snelheid" #define MSG_FLOW "Flow" #define MSG_FLOW0 "Flow 0" #define MSG_FLOW1 "Flow 1" #define MSG_FLOW2 "Flow 2" #define MSG_CONTROL "Control" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Fact" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "Aan " #define MSG_OFF "Uit" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Versn" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract" #define MSG_XSTEPS "Xsteps/mm" #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" #define MSG_RECTRACT "Terugtrekken" #define MSG_TEMPERATURE "Temperatuur" #define MSG_MOTION "Beweging" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Geheugen opslaan" #define MSG_LOAD_EPROM "Geheugen laden" #define MSG_RESTORE_FAILSAFE "Noodstop reset" #define MSG_REFRESH "Ververs" #define MSG_WATCH "Info scherm" #define MSG_PREPARE "Voorbereiden" #define MSG_TUNE "Afstellen" #define MSG_PAUSE_PRINT "Print pauzeren" #define MSG_RESUME_PRINT "Print hervatten" #define MSG_STOP_PRINT "Print stoppen" #define MSG_CARD_MENU "Print van SD" #define MSG_NO_CARD "Geen SD kaart" #define MSG_DWELL "Slapen..." #define MSG_USERWAIT "Wachten..." #define MSG_RESUMING "Print hervatten" #define MSG_NO_MOVE "Geen beweging." #define MSG_KILLED "AFGEBROKEN. " #define MSG_STOPPED "GESTOPT. " #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACTF "Retract F" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Verv. Filament" #define MSG_INIT_SDCARD "Init. SD kaart" #define MSG_CNG_SDCARD "Verv. SD card" #define MSG_ZPROBE_OUT "Z probe uit. bed" #define MSG_POSITION_UNKNOWN "Home X/Y voor Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystap X" #define MSG_BABYSTEP_Y "Babystap Y" #define MSG_BABYSTEP_Z "Babystap Z" #define MSG_ENDSTOP_ABORT "Endstop afbr." // Serial Console Messages #define MSG_Enqueing "enqueing \"" #define MSG_POWERUP "Opstarten" #define MSG_EXTERNAL_RESET " Externe Reset" #define MSG_BROWNOUT_RESET " Lage voedingsspanning Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_SOFTWARE_RESET " Software Reset" #define MSG_AUTHOR " | Auteur: " #define MSG_CONFIGURATION_VER " Laatst bijgewerkt: " #define MSG_FREE_MEMORY " Vrij Geheugen: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Bestand opslaan voltooid." #define MSG_ERR_LINE_NO "Regelnummer is niet het laatste regelnummer+1, Laatste regel: " #define MSG_ERR_CHECKSUM_MISMATCH "Checksum fout, Laatste regel: " #define MSG_ERR_NO_CHECKSUM "Regel zonder checksum, Laatste regel: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Geen regelnummer met checksum, Laatste regel: " #define MSG_FILE_PRINTED "Bestand afdrukken klaar" #define MSG_BEGIN_FILE_LIST "Begin bestandslijst" #define MSG_END_FILE_LIST "Einde bestandslijst" #define MSG_M104_INVALID_EXTRUDER "M104 Ongeldige extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Ongeldige extruder " #define MSG_M200_INVALID_EXTRUDER "M200 Ongeldige extruder " #define MSG_M218_INVALID_EXTRUDER "M218 Ongeldige extruder " #define MSG_M221_INVALID_EXTRUDER "M221 Ongeldige extruder " #define MSG_ERR_NO_THERMISTORS "Geen thermistors - geen temperatuur" #define MSG_M109_INVALID_EXTRUDER "M109 Ongeldige extruder " #define MSG_HEATING "Opwarmen..." #define MSG_HEATING_COMPLETE "Opwarmen klaar." #define MSG_BED_HEATING "Bed opwarmen." #define MSG_BED_DONE "Bed klaar." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup voor gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Aantal X: " #define MSG_ERR_KILLED "Printer stopgezet. kill() aangeroepen!" #define MSG_ERR_STOPPED "Printer gestopt vanwege fouten. Los de fout op en gebruik M999 om opnieuw te starten. (Temperatuur is gereset, stel deze opnieuw in na herstart)" #define MSG_RESEND "Opnieuw sturen: " #define MSG_UNKNOWN_COMMAND "Onbekend commando: \"" #define MSG_ACTIVE_EXTRUDER "Actieve Extruder: " #define MSG_INVALID_EXTRUDER "Ongeldige extruder" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Eindstop statusrapportage:" #define MSG_ENDSTOP_HIT "GERAAKT" #define MSG_ENDSTOP_OPEN "open" #define MSG_HOTEND_OFFSET "Hotend afwijking:" #define MSG_SD_CANT_OPEN_SUBDIR "Kan subdirectory niet openen" #define MSG_SD_INIT_FAIL "SD initialiseren mislukt" #define MSG_SD_VOL_INIT_FAIL "volume.init mislukt" #define MSG_SD_OPENROOT_FAIL "openRoot mislukt" #define MSG_SD_CARD_OK "SD kaart ok" #define MSG_SD_WORKDIR_FAIL "workDir openen mislukt" #define MSG_SD_OPEN_FILE_FAIL "Openen mislukt, bestand: " #define MSG_SD_FILE_OPENED "Bestand geopend: " #define MSG_SD_SIZE " Grootte: " #define MSG_SD_FILE_SELECTED "Bestanden geselecteerd:" #define MSG_SD_WRITE_TO_FILE "Schrijven naar bestand: " #define MSG_SD_PRINTING_BYTE "SD printen byte: " #define MSG_SD_NOT_PRINTING "Niet SD printen" #define MSG_SD_ERR_WRITE_TO_FILE "Fout tijdens het schrijven naar bestand:" #define MSG_SD_CANT_ENTER_SUBDIR "Kan subdirectory niet in: " #define MSG_STEPPER_TOO_HIGH "stapsnelheid te hoog:" #define MSG_ENDSTOPS_HIT "endstops geraakt: " #define MSG_ERR_COLD_EXTRUDE_STOP " Koude extrusie voorkomen" #define MSG_ERR_LONG_EXTRUDE_STOP " te lange extrusie voorkomen" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fout in menustructuur" #endif #if LANGUAGE_CHOICE == 12 // LCD Menu Messages // Please note these are limited to 17 characters! #define WELCOME_MSG MACHINE_NAME " preparada." #define MSG_SD_INSERTED "SD detectada." #define MSG_SD_REMOVED "SD expulsada." #define MSG_MAIN "Menu principal" #define MSG_AUTOSTART "Inici automatic" #define MSG_DISABLE_STEPPERS "Apagar motors" #define MSG_AUTO_HOME "Home global" #define MSG_SET_ORIGIN "Establir origen" #define MSG_PREHEAT_PLA "Preescalfar PLA" #define MSG_PREHEAT_PLA0 "Preescalfar PLA 1" #define MSG_PREHEAT_PLA1 "Preescalfar PLA 2" #define MSG_PREHEAT_PLA2 "Preescalfar PLA 3" #define MSG_PREHEAT_PLA012 "Preesc. tot PLA" #define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA" #define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA" #define MSG_PREHEAT_ABS "Preescalfar ABS" #define MSG_PREHEAT_ABS0 "Preescalfar ABS 1" #define MSG_PREHEAT_ABS1 "Preescalfar ABS 2" #define MSG_PREHEAT_ABS2 "Preescalfar ABS 3" #define MSG_PREHEAT_ABS012 "Preesc. tot ABS" #define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS" #define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS" #define MSG_COOLDOWN "Refredar" #define MSG_SWITCH_PS_ON "Switch power on" #define MSG_SWITCH_PS_OFF "Switch power off" #define MSG_EXTRUDE "Extruir" #define MSG_RETRACT "Refredar" #define MSG_MOVE_AXIS "Moure eixos" #define MSG_MOVE_X "Moure X" #define MSG_MOVE_Y "Moure Y" #define MSG_MOVE_Z "Moure Z" #define MSG_MOVE_E "Extrusor" #define MSG_MOVE_01MM "Moure 0.1mm" #define MSG_MOVE_1MM "Moure 1mm" #define MSG_MOVE_10MM "Moure 10mm" #define MSG_SPEED "Velocitat" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE2 "Nozzle3" #define MSG_BED "Llit" #define MSG_FAN_SPEED "Vel. Ventilador" #define MSG_FLOW "Fluxe" #define MSG_FLOW0 "Fluxe 0" #define MSG_FLOW1 "Fluxe 1" #define MSG_FLOW2 "Fluxe 2" #define MSG_CONTROL "Control" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Fact" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "On " #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract" #define MSG_XSTEPS "Xpassos/mm" #define MSG_YSTEPS "Ypassos/mm" #define MSG_ZSTEPS "Zpassos/mm" #define MSG_ESTEPS "Epassos/mm" #define MSG_RECTRACT "Retreure" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Moviment" #define MSG_CONTRAST "Contrast de LCD" #define MSG_STORE_EPROM "Desar a memoria" #define MSG_LOAD_EPROM "Carregar de mem." #define MSG_RESTORE_FAILSAFE "Rest. emergencia" #define MSG_REFRESH "Refrescar" #define MSG_WATCH "Pantalla Info." #define MSG_PREPARE "Preparar" #define MSG_TUNE "Calibrar" #define MSG_PAUSE_PRINT "Pausa imp." #define MSG_RESUME_PRINT "Reprendre imp." #define MSG_STOP_PRINT "Parar inp." #define MSG_CARD_MENU "Imprimir de SD" #define MSG_NO_CARD "-Sense targeta SD" #define MSG_DWELL "Repos..." #define MSG_USERWAIT "Esperant usuari.." #define MSG_RESUMING "Reprenent imp." #define MSG_NO_MOVE "Sense moviment." #define MSG_KILLED "PARADA DE EMERG. " #define MSG_STOPPED "ATURAT. " #define MSG_CONTROL_RETRACT "Retreure mm" #define MSG_CONTROL_RETRACTF "Retreure F" #define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm" #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Canviar filament" #define MSG_INIT_SDCARD "Iniciant SD" #define MSG_CNG_SDCARD "Canviar SD" #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y abans Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" // Serial Console Messages #define MSG_Enqueing "en cua \"" #define MSG_POWERUP "PowerUp" #define MSG_EXTERNAL_RESET " Reset Extern" #define MSG_BROWNOUT_RESET " Reset per Voltatge Incorrecte" #define MSG_WATCHDOG_RESET " Reset per Bloqueix" #define MSG_SOFTWARE_RESET " Reset per Software" #define MSG_AUTHOR " | Author: " #define MSG_CONFIGURATION_VER "Ultima actualitzacio: " #define MSG_FREE_MEMORY " Memoria lliure: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Fitxer desat." #define MSG_ERR_LINE_NO "El Numero de la Linia no es igual al Ultimo Numero de Linia+1, Ultima Linia:" #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincideix, Ultima Linia:" #define MSG_ERR_NO_CHECKSUM "No s'ha trobat el Checksum amb el numero de linea, Ultima Linea:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No s'ha trobat Numero de Linea amb el Checksum, Ultima Linea:" #define MSG_FILE_PRINTED "Impresio acabada" #define MSG_BEGIN_FILE_LIST "Inici de la llista d'arxius" #define MSG_END_FILE_LIST "Fi de la llista d'arxius" #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalid " #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalid " #define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalid " #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalid " #define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalid " #define MSG_ERR_NO_THERMISTORS "No hi ha termistors - sense temperatura" #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalid " #define MSG_HEATING "Escalfant..." #define MSG_HEATING_COMPLETE "Escalfament acabat." #define MSG_BED_HEATING "Escalfant llit." #define MSG_BED_DONE "Llit Calent." #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Count X: " #define MSG_ERR_KILLED "Impressora Parada per kill()!" #define MSG_ERR_STOPPED "Impressora Parada per errors. Repara l'error i utilitza M999 per reiniciar!. (Hi ha un reset de temperatura, cal ajustarla abans de continuuar)" #define MSG_RESEND "Reenviar: " #define MSG_UNKNOWN_COMMAND "Comanda Desconeguda: \"" #define MSG_ACTIVE_EXTRUDER "Extrusor Actiu: " #define MSG_INVALID_EXTRUDER "Extrusor Invalid" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Comprobant finals de carrera." #define MSG_ENDSTOP_HIT "Activat" #define MSG_ENDSTOP_OPEN "obert" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "No s'ha pogut obrir la carpeta" #define MSG_SD_INIT_FAIL "Error al iniciar la SD" #define MSG_SD_VOL_INIT_FAIL "Error al montar el volum" #define MSG_SD_OPENROOT_FAIL "Error al obrir la carpeta arrel" #define MSG_SD_CARD_OK "Targeta SD OK" #define MSG_SD_WORKDIR_FAIL "Error al obrir la carpeta de treball" #define MSG_SD_OPEN_FILE_FAIL "Error al obrir, Fitxer: " #define MSG_SD_FILE_OPENED "Fitxer obert:" #define MSG_SD_SIZE " Mida: " #define MSG_SD_FILE_SELECTED "Fitxer Seleccionat" #define MSG_SD_WRITE_TO_FILE "Desant al fitxer: " #define MSG_SD_PRINTING_BYTE "SD imprimint el byte " #define MSG_SD_NOT_PRINTING "No s'està imprimint amb SD" #define MSG_SD_ERR_WRITE_TO_FILE "Error al esciure al fitxer" #define MSG_SD_CANT_ENTER_SUBDIR "No es pot obrir la carpeta: " #define MSG_STEPPER_TOO_HIGH "Steprate massa alt: " #define MSG_ENDSTOPS_HIT "S'ha tocat el final de carrera: " #define MSG_ERR_COLD_EXTRUDE_STOP " extrusio freda evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusio massa llarga evitada" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Babystepping Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error a l'estructura dels menus" #endif #endif // ifndef LANGUAGE_H