/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ // 100k Epcos thermistor const short temptable_6[][2] PROGMEM = { { 1 * OVERSAMPLENR, 350 }, { 28 * OVERSAMPLENR, 250 }, // top rating 250C { 31 * OVERSAMPLENR, 245 }, { 35 * OVERSAMPLENR, 240 }, { 39 * OVERSAMPLENR, 235 }, { 42 * OVERSAMPLENR, 230 }, { 44 * OVERSAMPLENR, 225 }, { 49 * OVERSAMPLENR, 220 }, { 53 * OVERSAMPLENR, 215 }, { 62 * OVERSAMPLENR, 210 }, { 71 * OVERSAMPLENR, 205 }, // fitted graphically { 78 * OVERSAMPLENR, 200 }, // fitted graphically { 94 * OVERSAMPLENR, 190 }, { 102 * OVERSAMPLENR, 185 }, { 116 * OVERSAMPLENR, 170 }, { 143 * OVERSAMPLENR, 160 }, { 183 * OVERSAMPLENR, 150 }, { 223 * OVERSAMPLENR, 140 }, { 270 * OVERSAMPLENR, 130 }, { 318 * OVERSAMPLENR, 120 }, { 383 * OVERSAMPLENR, 110 }, { 413 * OVERSAMPLENR, 105 }, { 439 * OVERSAMPLENR, 100 }, { 484 * OVERSAMPLENR, 95 }, { 513 * OVERSAMPLENR, 90 }, { 607 * OVERSAMPLENR, 80 }, { 664 * OVERSAMPLENR, 70 }, { 781 * OVERSAMPLENR, 60 }, { 810 * OVERSAMPLENR, 55 }, { 849 * OVERSAMPLENR, 50 }, { 914 * OVERSAMPLENR, 45 }, { 914 * OVERSAMPLENR, 40 }, { 935 * OVERSAMPLENR, 35 }, { 954 * OVERSAMPLENR, 30 }, { 970 * OVERSAMPLENR, 25 }, { 978 * OVERSAMPLENR, 22 }, { 1008 * OVERSAMPLENR, 3 }, { 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C };