/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * */ /************************************************ * Rambo pin assignments MODIFIED FOR A4JP ************************************************/ #ifndef __AVR_ATmega2560__ #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu. #endif // Servo support #define SERVO0_PIN 22 // Motor header MX1 #define SERVO1_PIN 23 // Motor header MX2 #define SERVO2_PIN 24 // Motor header MX3 #define SERVO3_PIN 5 // PWM header pin 5 #if ENABLED(Z_PROBE_SLED) #define SLED_PIN -1 #endif #undef X_MS1_PIN #undef X_MS2_PIN #undef Y_MS1_PIN #undef Y_MS2_PIN #undef Z_MS1_PIN #undef Z_MS2_PIN #undef E0_MS1_PIN #undef E0_MS2_PIN #undef E1_MS1_PIN #undef E1_MS2_PIN #undef DIGIPOTSS_PIN //Fan_2 2 /***************** #if ENABLED(ULTRA_LCD) #define KILL_PIN -1 //was 80 Glen maybe a mistake #endif // ULTRA_LCD */ #if ENABLED(VIKI2) || ENABLED(miniVIKI) #define BEEPER_PIN 44 // Pins for DOGM SPI LCD Support #define DOGLCD_A0 70 #define DOGLCD_CS 71 #define LCD_SCREEN_ROT_180 #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #if ENABLED(TEMP_STAT_LEDS) #define STAT_LED_RED 22 #define STAT_LED_BLUE 32 #endif #endif // VIKI2/miniVIKI #define FILWIDTH_PIN 3 // ANALOG NUMBERING /************************************************ * Rambo pin assignments old ************************************************/ #define LARGE_FLASH true #define X_STEP_PIN 37 #define X_DIR_PIN 48 #define X_MIN_PIN 12 #define X_MAX_PIN 24 #define X_ENABLE_PIN 29 #define X_MS1_PIN 40 #define X_MS2_PIN 41 #define Y_STEP_PIN 36 #define Y_DIR_PIN 49 #define Y_MIN_PIN 11 #define Y_MAX_PIN 23 #define Y_ENABLE_PIN 28 #define Y_MS1_PIN 69 #define Y_MS2_PIN 39 #define Z_STEP_PIN 35 #define Z_DIR_PIN 47 #define Z_MIN_PIN 10 #define Z_MAX_PIN 30 #define Z_ENABLE_PIN 27 #define Z_MS1_PIN 68 #define Z_MS2_PIN 67 #define HEATER_BED_PIN 3 #define TEMP_BED_PIN 7 //2014/02/04 0:T0 / 1:T1 / 2:T2 / 7:T3 #define HEATER_0_PIN 9 #define TEMP_0_PIN 0 #define HEATER_1_PIN 7 #define TEMP_1_PIN -1 #define HEATER_2_PIN -1 #define TEMP_2_PIN -1 #define E0_STEP_PIN 34 #define E0_DIR_PIN 43 #define E0_ENABLE_PIN 26 #define E0_MS1_PIN 65 #define E0_MS2_PIN 66 #define E1_STEP_PIN 33 #define E1_DIR_PIN 42 #define E1_ENABLE_PIN 25 #define E1_MS1_PIN 63 #define E1_MS2_PIN 64 #define DIGIPOTSS_PIN 38 #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define FAN_PIN 8 #define PS_ON_PIN 4 #define KILL_PIN -1 #define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. #define FAN_0_PIN 6 //Glen #define FAN_1_PIN 2 //Glen // 2015/12/23 #define LCD_PINS_RS 70 //ext2_5 #define LCD_PINS_ENABLE 71 //ext2_7 #define LCD_PINS_D4 72 ///////Ext2 9 ? #define LCD_PINS_D5 73 ///////Ext2 11 ? #define LCD_PINS_D6 74 //ext2_13 #define LCD_PINS_D7 75 ///////Ext2 15 ? #define BEEPER_PIN -1 #define BTN_HOME 80 //ext_16 #define BTN_CENTER 81 //ext_14 #define BTN_ENC BTN_CENTER #define BTN_RIGHT 82 //ext_12 #define BTN_LEFT 83 //ext_10 #define BTN_UP 84 //ext2_8 #define BTN_DOWN 85 //ext2_6 #define HOME_PIN BTN_HOME