/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * English * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_EN_H #define LANGUAGE_EN_H //#define SIMULATE_ROMFONT //Comment in to see what is seen on the character based displays #if DISABLED(SIMULATE_ROMFONT) && DISABLED(DISPLAY_CHARSET_ISO10646_1) && DISABLED(DISPLAY_CHARSET_ISO10646_5) && DISABLED(DISPLAY_CHARSET_ISO10646_KANA) && DISABLED(DISPLAY_CHARSET_ISO10646_GREEK) && DISABLED(DISPLAY_CHARSET_ISO10646_CN) #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. #endif #ifndef WELCOME_MSG #define WELCOME_MSG MACHINE_NAME " ready." #endif #ifndef MSG_SD_INSERTED #define MSG_SD_INSERTED "Card inserted" #endif #ifndef MSG_SD_REMOVED #define MSG_SD_REMOVED "Card removed" #endif #ifndef MSG_LCD_ENDSTOPS #define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters #endif #ifndef MSG_MAIN #define MSG_MAIN "Main" #endif #ifndef MSG_AUTOSTART #define MSG_AUTOSTART "Autostart" #endif #ifndef MSG_DISABLE_STEPPERS #define MSG_DISABLE_STEPPERS "Disable steppers" #endif #ifndef MSG_AUTO_HOME #define MSG_AUTO_HOME "Auto home" #endif #ifndef MSG_AUTO_HOME_X #define MSG_AUTO_HOME_X "Home X" #endif #ifndef MSG_AUTO_HOME_Y #define MSG_AUTO_HOME_Y "Home Y" #endif #ifndef MSG_AUTO_HOME_Z #define MSG_AUTO_HOME_Z "Home Z" #endif #ifndef MSG_LEVEL_BED_HOMING #define MSG_LEVEL_BED_HOMING "Homing XYZ" #endif #ifndef MSG_LEVEL_BED_WAITING #define MSG_LEVEL_BED_WAITING "Click to Begin" #endif #ifndef MSG_LEVEL_BED_NEXT_POINT #define MSG_LEVEL_BED_NEXT_POINT "Next Point" #endif #ifndef MSG_LEVEL_BED_DONE #define MSG_LEVEL_BED_DONE "Leveling Done!" #endif #ifndef MSG_LEVEL_BED_CANCEL #define MSG_LEVEL_BED_CANCEL "Cancel" #endif #ifndef MSG_SET_HOME_OFFSETS #define MSG_SET_HOME_OFFSETS "Set home offsets" #endif #ifndef MSG_HOME_OFFSETS_APPLIED #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #endif #ifndef MSG_SET_ORIGIN #define MSG_SET_ORIGIN "Set origin" #endif #ifndef MSG_PREHEAT_1 #define MSG_PREHEAT_1 "Preheat PLA" #endif #ifndef MSG_PREHEAT_1_N #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " #endif #ifndef MSG_PREHEAT_1_ALL #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All" #endif #ifndef MSG_PREHEAT_1_BEDONLY #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Bed" #endif #ifndef MSG_PREHEAT_1_SETTINGS #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf" #endif #ifndef MSG_PREHEAT_2 #define MSG_PREHEAT_2 "Preheat ABS" #endif #ifndef MSG_PREHEAT_2_N #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " #endif #ifndef MSG_PREHEAT_2_ALL #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All" #endif #ifndef MSG_PREHEAT_2_BEDONLY #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Bed" #endif #ifndef MSG_PREHEAT_2_SETTINGS #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf" #endif #ifndef MSG_COOLDOWN #define MSG_COOLDOWN "Cooldown" #endif #ifndef MSG_SWITCH_PS_ON #define MSG_SWITCH_PS_ON "Switch power on" #endif #ifndef MSG_SWITCH_PS_OFF #define MSG_SWITCH_PS_OFF "Switch power off" #endif #ifndef MSG_EXTRUDE #define MSG_EXTRUDE "Extrude" #endif #ifndef MSG_RETRACT #define MSG_RETRACT "Retract" #endif #ifndef MSG_MOVE_AXIS #define MSG_MOVE_AXIS "Move axis" #endif #ifndef MSG_LEVEL_BED #define MSG_LEVEL_BED "Level bed" #endif #ifndef MSG_MOVE_X #define MSG_MOVE_X "Move X" #endif #ifndef MSG_MOVE_Y #define MSG_MOVE_Y "Move Y" #endif #ifndef MSG_MOVE_Z #define MSG_MOVE_Z "Move Z" #endif #ifndef MSG_MOVE_E #define MSG_MOVE_E "Extruder" #endif #ifndef MSG_MOVE_01MM #define MSG_MOVE_01MM "Move 0.1mm" #endif #ifndef MSG_MOVE_1MM #define MSG_MOVE_1MM "Move 1mm" #endif #ifndef MSG_MOVE_10MM #define MSG_MOVE_10MM "Move 10mm" #endif #ifndef MSG_SPEED #define MSG_SPEED "Speed" #endif #ifndef MSG_BED_Z #define MSG_BED_Z "Bed Z" #endif #ifndef MSG_NOZZLE #define MSG_NOZZLE "Nozzle" #endif #ifndef MSG_BED #define MSG_BED "Bed" #endif #ifndef MSG_FAN_SPEED #define MSG_FAN_SPEED "Fan speed" #endif #ifndef MSG_FLOW #define MSG_FLOW "Flow" #endif #ifndef MSG_CONTROL #define MSG_CONTROL "Control" #endif #ifndef MSG_MIN #define MSG_MIN " " LCD_STR_THERMOMETER " Min" #endif #ifndef MSG_MAX #define MSG_MAX " " LCD_STR_THERMOMETER " Max" #endif #ifndef MSG_FACTOR #define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact" #endif #ifndef MSG_AUTOTEMP #define MSG_AUTOTEMP "Autotemp" #endif #ifndef MSG_ON #define MSG_ON "On " #endif #ifndef MSG_OFF #define MSG_OFF "Off" #endif #ifndef MSG_PID_P #define MSG_PID_P "PID-P" #endif #ifndef MSG_PID_I #define MSG_PID_I "PID-I" #endif #ifndef MSG_PID_D #define MSG_PID_D "PID-D" #endif #ifndef MSG_PID_C #define MSG_PID_C "PID-C" #endif #ifndef MSG_SELECT #define MSG_SELECT "Select" #endif #ifndef MSG_ACC #define MSG_ACC "Accel" #endif #ifndef MSG_VXY_JERK #define MSG_VXY_JERK "Vxy-jerk" #endif #ifndef MSG_VZ_JERK #define MSG_VZ_JERK "Vz-jerk" #endif #ifndef MSG_VE_JERK #define MSG_VE_JERK "Ve-jerk" #endif #ifndef MSG_VMAX #define MSG_VMAX "Vmax " #endif #ifndef MSG_VMIN #define MSG_VMIN "Vmin" #endif #ifndef MSG_VTRAV_MIN #define MSG_VTRAV_MIN "VTrav min" #endif #ifndef MSG_AMAX #define MSG_AMAX "Amax " #endif #ifndef MSG_A_RETRACT #define MSG_A_RETRACT "A-retract" #endif #ifndef MSG_A_TRAVEL #define MSG_A_TRAVEL "A-travel" #endif #ifndef MSG_XSTEPS #define MSG_XSTEPS "Xsteps/mm" #endif #ifndef MSG_YSTEPS #define MSG_YSTEPS "Ysteps/mm" #endif #ifndef MSG_ZSTEPS #define MSG_ZSTEPS "Zsteps/mm" #endif #ifndef MSG_ESTEPS #define MSG_ESTEPS "Esteps/mm" #endif #ifndef MSG_TEMPERATURE #define MSG_TEMPERATURE "Temperature" #endif #ifndef MSG_MOTION #define MSG_MOTION "Motion" #endif #ifndef MSG_VOLUMETRIC #define MSG_VOLUMETRIC "Filament" #endif #ifndef MSG_VOLUMETRIC_ENABLED #define MSG_VOLUMETRIC_ENABLED "E in mm3" #endif #ifndef MSG_FILAMENT_DIAM #define MSG_FILAMENT_DIAM "Fil. Dia." #endif #ifndef MSG_CONTRAST #define MSG_CONTRAST "LCD contrast" #endif #ifndef MSG_STORE_EPROM #define MSG_STORE_EPROM "Store memory" #endif #ifndef MSG_LOAD_EPROM #define MSG_LOAD_EPROM "Load memory" #endif #ifndef MSG_RESTORE_FAILSAFE #define MSG_RESTORE_FAILSAFE "Restore failsafe" #endif #ifndef MSG_REFRESH #define MSG_REFRESH "Refresh" #endif #ifndef MSG_WATCH #define MSG_WATCH "Info screen" #endif #ifndef MSG_PREPARE #define MSG_PREPARE "Prepare" #endif #ifndef MSG_TUNE #define MSG_TUNE "Tune" #endif #ifndef MSG_PAUSE_PRINT #define MSG_PAUSE_PRINT "Pause print" #endif #ifndef MSG_RESUME_PRINT #define MSG_RESUME_PRINT "Resume print" #endif #ifndef MSG_STOP_PRINT #define MSG_STOP_PRINT "Stop print" #endif #ifndef MSG_CARD_MENU #define MSG_CARD_MENU "Print from SD" #endif #ifndef MSG_NO_CARD #define MSG_NO_CARD "No SD card" #endif #ifndef MSG_DWELL #define MSG_DWELL "Sleep..." #endif #ifndef MSG_USERWAIT #define MSG_USERWAIT "Wait for user..." #endif #ifndef MSG_RESUMING #define MSG_RESUMING "Resuming print" #endif #ifndef MSG_PRINT_ABORTED #define MSG_PRINT_ABORTED "Print aborted" #endif #ifndef MSG_NO_MOVE #define MSG_NO_MOVE "No move." #endif #ifndef MSG_KILLED #define MSG_KILLED "KILLED. " #endif #ifndef MSG_STOPPED #define MSG_STOPPED "STOPPED. " #endif #ifndef MSG_CONTROL_RETRACT #define MSG_CONTROL_RETRACT "Retract mm" #endif #ifndef MSG_CONTROL_RETRACT_SWAP #define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm" #endif #ifndef MSG_CONTROL_RETRACTF #define MSG_CONTROL_RETRACTF "Retract V" #endif #ifndef MSG_CONTROL_RETRACT_ZLIFT #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #endif #ifndef MSG_CONTROL_RETRACT_RECOVER #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #endif #ifndef MSG_CONTROL_RETRACT_RECOVER_SWAP #define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm" #endif #ifndef MSG_CONTROL_RETRACT_RECOVERF #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #endif #ifndef MSG_AUTORETRACT #define MSG_AUTORETRACT "AutoRetr." #endif #ifndef MSG_FILAMENTCHANGE #define MSG_FILAMENTCHANGE "Change filament" #endif #ifndef MSG_INIT_SDCARD #define MSG_INIT_SDCARD "Init. SD card" #endif #ifndef MSG_CNG_SDCARD #define MSG_CNG_SDCARD "Change SD card" #endif #ifndef MSG_ZPROBE_OUT #define MSG_ZPROBE_OUT "Z probe out. bed" #endif #ifndef MSG_HOME #define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #endif #ifndef MSG_FIRST #define MSG_FIRST "first" #endif #ifndef MSG_ZPROBE_ZOFFSET #define MSG_ZPROBE_ZOFFSET "Z Offset" #endif #ifndef MSG_BABYSTEP_X #define MSG_BABYSTEP_X "Babystep X" #endif #ifndef MSG_BABYSTEP_Y #define MSG_BABYSTEP_Y "Babystep Y" #endif #ifndef MSG_BABYSTEP_Z #define MSG_BABYSTEP_Z "Babystep Z" #endif #ifndef MSG_ENDSTOP_ABORT #define MSG_ENDSTOP_ABORT "Endstop abort" #endif #ifndef MSG_HEATING_FAILED_LCD #define MSG_HEATING_FAILED_LCD "Heating failed" #endif #ifndef MSG_ERR_REDUNDANT_TEMP #define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP" #endif #ifndef MSG_THERMAL_RUNAWAY #define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY" #endif #ifndef MSG_ERR_MAXTEMP #define MSG_ERR_MAXTEMP "Err: MAXTEMP" #endif #ifndef MSG_ERR_MINTEMP #define MSG_ERR_MINTEMP "Err: MINTEMP" #endif #ifndef MSG_ERR_MAXTEMP_BED #define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED" #endif #ifndef MSG_ERR_MINTEMP_BED #define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED" #endif #ifndef MSG_HALTED #define MSG_HALTED "PRINTER HALTED" #endif #ifndef MSG_PLEASE_RESET #define MSG_PLEASE_RESET "Please reset" #endif #ifndef MSG_SHORT_DAY #define MSG_SHORT_DAY "d" // One character only #endif #ifndef MSG_SHORT_HOUR #define MSG_SHORT_HOUR "h" // One character only #endif #ifndef MSG_SHORT_MINUTE #define MSG_SHORT_MINUTE "m" // One character only #endif #ifndef MSG_HEATING #define MSG_HEATING "Heating..." #endif #ifndef MSG_HEATING_COMPLETE #define MSG_HEATING_COMPLETE "Heating done." #endif #ifndef MSG_BED_HEATING #define MSG_BED_HEATING "Bed Heating." #endif #ifndef MSG_BED_DONE #define MSG_BED_DONE "Bed done." #endif #ifndef MSG_DELTA_CALIBRATE #define MSG_DELTA_CALIBRATE "Delta Calibration" #endif #ifndef MSG_DELTA_CALIBRATE_X #define MSG_DELTA_CALIBRATE_X "Calibrate X" #endif #ifndef MSG_DELTA_CALIBRATE_Y #define MSG_DELTA_CALIBRATE_Y "Calibrate Y" #endif #ifndef MSG_DELTA_CALIBRATE_Z #define MSG_DELTA_CALIBRATE_Z "Calibrate Z" #endif #ifndef MSG_DELTA_CALIBRATE_CENTER #define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center" #endif #ifndef MSG_INFO_MENU #define MSG_INFO_MENU "About Printer" #endif #ifndef MSG_INFO_PRINTER_MENU #define MSG_INFO_PRINTER_MENU "Printer Info" #endif #ifndef MSG_INFO_STATS_MENU #define MSG_INFO_STATS_MENU "Printer Stats" #endif #ifndef MSG_INFO_BOARD_MENU #define MSG_INFO_BOARD_MENU "Board Info" #endif #ifndef MSG_INFO_THERMISTOR_MENU #define MSG_INFO_THERMISTOR_MENU "Thermistors" #endif #ifndef MSG_INFO_EXTRUDERS #define MSG_INFO_EXTRUDERS "Extruders" #endif #ifndef MSG_INFO_BAUDRATE #define MSG_INFO_BAUDRATE "Baud" #endif #ifndef MSG_INFO_PROTOCOL #define MSG_INFO_PROTOCOL "Protocol" #endif #if LCD_WIDTH > 19 #ifndef MSG_INFO_PRINT_COUNT #define MSG_INFO_PRINT_COUNT "Print Count" #endif #ifndef MSG_INFO_COMPLETED_PRINTS #define MSG_INFO_COMPLETED_PRINTS "Completed" #endif #ifndef MSG_INFO_PRINT_TIME #define MSG_INFO_PRINT_TIME "Total print time" #endif #ifndef MSG_INFO_PRINT_LONGEST #define MSG_INFO_PRINT_LONGEST "Longest job time" #endif #ifndef MSG_INFO_PRINT_FILAMENT #define MSG_INFO_PRINT_FILAMENT "Extruded total" #endif #else #ifndef MSG_INFO_PRINT_COUNT #define MSG_INFO_PRINT_COUNT "Prints" #endif #ifndef MSG_INFO_COMPLETED_PRINTS #define MSG_INFO_COMPLETED_PRINTS "Completed" #endif #ifndef MSG_INFO_PRINT_TIME #define MSG_INFO_PRINT_TIME "Total" #endif #ifndef MSG_INFO_PRINT_LONGEST #define MSG_INFO_PRINT_LONGEST "Longest" #endif #ifndef MSG_INFO_PRINT_FILAMENT #define MSG_INFO_PRINT_FILAMENT "Extruded" #endif #endif #ifndef MSG_INFO_MIN_TEMP #define MSG_INFO_MIN_TEMP "Min Temp" #endif #ifndef MSG_INFO_MAX_TEMP #define MSG_INFO_MAX_TEMP "Max Temp" #endif #ifndef MSG_INFO_PSU #define MSG_INFO_PSU "Power Supply" #endif #ifndef MSG_FILAMENT_CHANGE_HEADER #define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT" #endif #ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER #define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:" #endif #ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more" #endif #ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME #define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print" #endif #if LCD_HEIGHT >= 4 #ifndef MSG_FILAMENT_CHANGE_INIT_1 #define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start" #endif #ifndef MSG_FILAMENT_CHANGE_INIT_2 #define MSG_FILAMENT_CHANGE_INIT_2 "of the filament" #endif #ifndef MSG_FILAMENT_CHANGE_INIT_3 #define MSG_FILAMENT_CHANGE_INIT_3 "change" #endif #ifndef MSG_FILAMENT_CHANGE_UNLOAD_1 #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for" #endif #ifndef MSG_FILAMENT_CHANGE_UNLOAD_2 #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload" #endif #ifndef MSG_FILAMENT_CHANGE_UNLOAD_3 #define MSG_FILAMENT_CHANGE_UNLOAD_3 "" #endif #ifndef MSG_FILAMENT_CHANGE_INSERT_1 #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament" #endif #ifndef MSG_FILAMENT_CHANGE_INSERT_2 #define MSG_FILAMENT_CHANGE_INSERT_2 "and press button" #endif #ifndef MSG_FILAMENT_CHANGE_INSERT_3 #define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..." #endif #ifndef MSG_FILAMENT_CHANGE_LOAD_1 #define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for" #endif #ifndef MSG_FILAMENT_CHANGE_LOAD_2 #define MSG_FILAMENT_CHANGE_LOAD_2 "filament load" #endif #ifndef MSG_FILAMENT_CHANGE_LOAD_3 #define MSG_FILAMENT_CHANGE_LOAD_3 "" #endif #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1 #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for" #endif #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_2 #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude" #endif #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_3 #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "" #endif #ifndef MSG_FILAMENT_CHANGE_RESUME_1 #define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print" #endif #ifndef MSG_FILAMENT_CHANGE_RESUME_2 #define MSG_FILAMENT_CHANGE_RESUME_2 "to resume" #endif #ifndef MSG_FILAMENT_CHANGE_RESUME_3 #define MSG_FILAMENT_CHANGE_RESUME_3 "" #endif #else // LCD_HEIGHT < 4 #ifndef MSG_FILAMENT_CHANGE_INIT_1 #define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..." #endif #ifndef MSG_FILAMENT_CHANGE_UNLOAD_1 #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..." #endif #ifndef MSG_FILAMENT_CHANGE_INSERT_1 #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click" #endif #ifndef MSG_FILAMENT_CHANGE_LOAD_1 #define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..." #endif #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1 #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..." #endif #ifndef MSG_FILAMENT_CHANGE_RESUME_1 #define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..." #endif #endif // LCD_HEIGHT < 4 // Never translate these strings #define MSG_X "X" #define MSG_Y "Y" #define MSG_Z "Z" #define MSG_E "E" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" #define MSG_H4 "4" #define MSG_N1 " 1" #define MSG_N2 " 2" #define MSG_N3 " 3" #define MSG_N4 " 4" #define MSG_E1 " E1" #define MSG_E2 " E2" #define MSG_E3 " E3" #define MSG_E4 " E4" #define MSG_MOVE_E1 "1" #define MSG_MOVE_E2 "2" #define MSG_MOVE_E3 "3" #define MSG_MOVE_E4 "4" #define MSG_DIAM_E1 " 1" #define MSG_DIAM_E2 " 2" #define MSG_DIAM_E3 " 3" #define MSG_DIAM_E4 " 4" #endif // LANGUAGE_EN_H