#ifndef CONDITIONALS_LULZBOT #define CONDITIONALS_LULZBOT /* We define LULZBOT_ macros based on which printer or toolhead we are * building for, these macros are then placed where appropriate in the * Marlin source. * * Using our own set of macros and limiting changes to Marlin's files * to one-liners makes it easier to merge from upstream. All macros are * prefixed with LULZBOT_ so that it is easy to see what was changed and * where. If a default setting is commented out in Marlin, we define * LULZBOT_{SETTING}_DISABLED here, so we have a record of things that * got disabled. */ #define LULZBOT_FW_VERSION ".21" // Change this with each update #if ( \ !defined(LULZBOT_Gladiola_Mini) && \ !defined(LULZBOT_Hibiscus_Mini2) && \ !defined(LULZBOT_Gladiola_MiniLCD) && \ !defined(LULZBOT_Hibiscus_Mini2LCD) && \ !defined(LULZBOT_Juniper_TAZ5) && \ !defined(LULZBOT_Oliveoil_TAZ6) && \ !defined(LULZBOT_Quiver_TAZ7) \ ) || ( \ !defined(TOOLHEAD_Gladiola_SingleExtruder) && \ !defined(TOOLHEAD_Albatross_Flexystruder) && \ !defined(TOOLHEAD_Finch_Aerostruder) && \ !defined(TOOLHEAD_Tilapia_SingleExtruder) && \ !defined(TOOLHEAD_Kanyu_Flexystruder) && \ !defined(TOOLHEAD_Opah_Moarstruder) && \ !defined(TOOLHEAD_Javelin_DualExtruderV2) && \ !defined(TOOLHEAD_Longfin_FlexyDually) && \ !defined(TOOLHEAD_Yellowfin_DualExtruderV3) && \ !defined(TOOLHEAD_Angelfish_Aerostruder) && \ !defined(TOOLHEAD_Devel_ServoDual) \ ) #error Must specify model and toolhead. Please see "Configuration_LulzBot.h" for directions. #endif /*********************** PRINTER MODEL CHARACTERISTICS **************************/ #if defined(LULZBOT_Gladiola_Mini) #define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini" #define LULZBOT_LCD_MACHINE_NAME "Mini" #define LULZBOT_IS_MINI #define LULZBOT_MINI_BED #define LULZBOT_USE_AUTOLEVELING #define LULZBOT_USE_MIN_ENDSTOPS #define LULZBOT_USE_MAX_ENDSTOPS #define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS #define LULZBOT_BAUDRATE 115200 #define LULZBOT_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585" #endif #if defined(LULZBOT_Hibiscus_Mini2) #define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2" #define LULZBOT_LCD_MACHINE_NAME "Mini 2" #define LULZBOT_IS_MINI #define LULZBOT_MINI_BED #define LULZBOT_TWO_PIECE_BED #define LULZBOT_USE_AUTOLEVELING #define LULZBOT_USE_MIN_ENDSTOPS #define LULZBOT_USE_MAX_ENDSTOPS #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS #define LULZBOT_BAUDRATE 250000 #define LULZBOT_PRINTCOUNTER #define LULZBOT_UUID "1b8d32d3-0596-4335-8cd4-f3741a095087" #endif #if defined(LULZBOT_Gladiola_MiniLCD) #define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini" #define LULZBOT_LCD_MACHINE_NAME "Mini LCD" #define LULZBOT_IS_MINI #define LULZBOT_MINI_BED #define LULZBOT_USE_LCD_DISPLAY #define LULZBOT_USE_AUTOLEVELING #define LULZBOT_USE_MIN_ENDSTOPS #define LULZBOT_USE_MAX_ENDSTOPS #define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS #define LULZBOT_BAUDRATE 115200 #define LULZBOT_UUID "083f68f1-028e-494c-98e1-f2e0dfaee9a5" #endif #if defined(LULZBOT_Hibiscus_Mini2LCD) // Prototype Mini w/ Z-Belt #define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2" #define LULZBOT_LCD_MACHINE_NAME "Mini 2 LCD" #define LULZBOT_IS_MINI #define LULZBOT_TWO_PIECE_BED #define LULZBOT_MINI_BED #define LULZBOT_USE_LCD_DISPLAY #define LULZBOT_USE_AUTOLEVELING #define LULZBOT_USE_MIN_ENDSTOPS #define LULZBOT_USE_MAX_ENDSTOPS #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS #define LULZBOT_BAUDRATE 250000 #define LULZBOT_PRINTCOUNTER #define LULZBOT_UUID "80fed4d6-4d15-4512-a02e-61b1dc4fb072" #endif #if defined(LULZBOT_Juniper_TAZ5) #define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 5" #define LULZBOT_LCD_MACHINE_NAME "TAZ 5" #define LULZBOT_IS_TAZ #define LULZBOT_TAZ_BED #define LULZBOT_USE_LCD_DISPLAY #define LULZBOT_USE_MIN_ENDSTOPS #define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS #define LULZBOT_BAUDRATE 250000 #define LULZBOT_UUID "c3255c96-4097-4884-8ed0-ded2ff9bae61" #endif #if defined(LULZBOT_Oliveoil_TAZ6) #define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 6" #define LULZBOT_LCD_MACHINE_NAME "TAZ 6" #define LULZBOT_IS_TAZ #define LULZBOT_TAZ_BED #define LULZBOT_USE_LCD_DISPLAY #define LULZBOT_USE_AUTOLEVELING #define LULZBOT_USE_MIN_ENDSTOPS #define LULZBOT_USE_MAX_ENDSTOPS #define LULZBOT_USE_HOME_BUTTON #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS #define LULZBOT_BAUDRATE 250000 #define LULZBOT_UUID "845f003c-aebd-4e53-a6b9-7d0984fde609" #endif #if defined(LULZBOT_Quiver_TAZ7) #define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 7" #define LULZBOT_LCD_MACHINE_NAME "TAZ 7" #define LULZBOT_IS_TAZ #define LULZBOT_TAZ_BED #define LULZBOT_TWO_PIECE_BED #define LULZBOT_USE_LCD_DISPLAY #define LULZBOT_USE_AUTOLEVELING #define LULZBOT_USE_MIN_ENDSTOPS #define LULZBOT_USE_MAX_ENDSTOPS #define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS #define LULZBOT_BAUDRATE 250000 #define LULZBOT_PRINTCOUNTER #define LULZBOT_UUID "a952577d-8722-483a-999d-acdc9e772b7b" #endif /**************************** GENERAL CONFIGURATION *****************************/ #define LULZBOT_STRING_CONFIG_H_AUTHOR "(Aleph Objects Inc., LulzBot Git Repository)" #define LULZBOT_EEPROM_SETTINGS #define LULZBOT_EMERGENCY_PARSER #define LULZBOT_NOZZLE_PARK_FEATURE #define LULZBOT_AUTO_REPORT_TEMPERATURES #define LULZBOT_ADVANCED_OK #define LULZBOT_HOST_KEEPALIVE_FEATURE_DISABLED // Marlin 1.1.4 has changed the behavior of G92 so that // it changes software endstops, making it less useful // for making position adjustments after hitting an // endstop. We need the old behavior of G92 for the // Yellowfin start GCODE and it is also a useful // feature for custom height adjustments (something // requested in the forums). The following restores // the old behavior. #define LULZBOT_G92_BACKWARDS_COMPATIBILITY // Prior branches of the LulzBot firmware used G26 // to reset a probe failed condition. Marlin upstrem // now redefines that for unified bed leveling. The // following maps G26 to M999 for equivalent behavior, // so long as UBL is disabled. #define LULZBOT_G26_BACKWARDS_COMPATIBILITY // The following should be kept more or less like M999 #define LULZBOT_G26_RESET_ACTION \ Running = true; \ lcd_reset_alert_level(); // Fix for auto0.g, which is broken #define LULZBOT_AUTOSTART_BUGFIX // Q&A wants to be able to use M226 on endstops switches #define LULZBOT_NO_PIN_PROTECTION_ON_M226 /******************** MOTHERBOARD AND PIN CONFIGURATION ***********************/ #if defined(TOOLHEAD_Devel_ServoDual) #undef LULZBOT_USE_HOME_BUTTON #endif // Whether endstops are inverting #define LULZBOT_NORMALLY_CLOSED_ENDSTOP false #define LULZBOT_NORMALLY_OPEN_ENDSTOP true #define LULZBOT_NO_ENDSTOP true #if defined(LULZBOT_IS_MINI) #define LULZBOT_MOTHERBOARD BOARD_MINIRAMBO #define LULZBOT_CONTROLLER_FAN_PIN FAN1_PIN // Digital pin 6 #elif defined(LULZBOT_IS_TAZ) #define LULZBOT_MOTHERBOARD BOARD_RAMBO #define LULZBOT_CONTROLLER_FAN_PIN FAN2_PIN // Digital pin 2 #endif #if defined(LULZBOT_USE_HOME_BUTTON) #define LULZBOT_Z_MIN_PROBE_ENDSTOP #define LULZBOT_Z_MIN_PROBE_PIN SERVO0_PIN // Digital pin 22 // On the TAZ 6, the bed washers are on Z_MIN_PROBE while the // Z-Home button is on Z_MIN, yet we need both to be disabled // when z_probe_enabled is false. We added this special case // to "endstops.cpp" #define LULZBOT_Z_MIN_USES_Z_PROBE_ENABLED #else // The Mini and TAZ 7+ lack a home button and probe using the Z_MIN pin. #define LULZBOT_Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #endif /*********************** HOMING & AXIS DIRECTIONS ******************************/ #define LULZBOT_INVERT_X_DIR false #define LULZBOT_INVERT_Y_DIR true #define LULZBOT_INVERT_Z_DIR false #define LULZBOT_INVERT_E0_DIR true #define LULZBOT_INVERT_E1_DIR true #if defined(LULZBOT_IS_MINI) #define LULZBOT_HOMING_Z_WITH_PROBE false #define LULZBOT_INVERT_X_HOME_DIR -1 // Home left #define LULZBOT_INVERT_Y_HOME_DIR 1 // Home bed forward #define LULZBOT_INVERT_Z_HOME_DIR 1 // Home to top #define LULZBOT_QUICKHOME #elif defined(LULZBOT_Juniper_TAZ5) #define LULZBOT_HOMING_Z_WITH_PROBE false #define LULZBOT_INVERT_X_HOME_DIR -1 // Home left #define LULZBOT_INVERT_Y_HOME_DIR -1 // Home bed rear #define LULZBOT_INVERT_Z_HOME_DIR -1 // Home towards bed #define LULZBOT_QUICKHOME #elif defined(LULZBOT_IS_TAZ) && !defined(LULZBOT_USE_HOME_BUTTON) #define LULZBOT_INVERT_X_HOME_DIR -1 // Home left #define LULZBOT_INVERT_Y_HOME_DIR 1 // Home bed forward #define LULZBOT_INVERT_Z_HOME_DIR 1 // Home to top #define LULZBOT_QUICKHOME #elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_HOME_BUTTON) #define LULZBOT_INVERT_X_HOME_DIR -1 // Home left #define LULZBOT_INVERT_Y_HOME_DIR 1 // Home bed forward #define LULZBOT_INVERT_Z_HOME_DIR -1 // Home towards bed #define LULZBOT_QUICKHOME #endif #if defined(LULZBOT_MINI_BED) #define LULZBOT_HOMING_FEEDRATE_XY (30*60) // mm/m #define LULZBOT_HOMING_FEEDRATE_Z (8*60) // mm/m #elif defined(LULZBOT_Quiver_TAZ7) #define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m #define LULZBOT_HOMING_FEEDRATE_Z (10*60) // mm/m #elif defined(LULZBOT_TAZ_BED) #define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m #define LULZBOT_HOMING_FEEDRATE_Z (3*60) // mm/m #endif // LULZBOT_TAZ_BED // Only the TAZ 6 has a Z-homing button #if defined(LULZBOT_USE_HOME_BUTTON) #define LULZBOT_Z_SAFE_HOMING #define LULZBOT_Z_SAFE_HOMING_X_POINT (-19) #define LULZBOT_Z_SAFE_HOMING_Y_POINT (258) #define LULZBOT_Z_HOMING_HEIGHT 5 #define LULZBOT_AFTER_Z_HOME_Z_RAISE 10 #define LULZBOT_AFTER_Z_HOME_Z_ORIGIN 0 #elif defined(LULZBOT_Juniper_TAZ5) // Set safe homing position so fan duct does not hit. #define LULZBOT_Z_SAFE_HOMING #define LULZBOT_Z_SAFE_HOMING_X_POINT 10 #define LULZBOT_Z_SAFE_HOMING_Y_POINT 10 #define LULZBOT_Z_HOMING_HEIGHT 5 #else #define LULZBOT_Z_HOMING_HEIGHT 0 #endif // LULZBOT_USE_HOME_BUTTON #define LULZBOT_G92_Z(z) \ stepper.synchronize(); \ current_position[Z_AXIS] = z; \ SYNC_PLAN_POSITION_KINEMATIC(); #define LULZBOT_G0_Z(z) \ do_blocking_move_to_z(z); // On a TAZ, we need to raise the print head after homing to clear the button; // On the yellowfin we also need to reset the origin to account for the Z home riser. #if defined(LULZBOT_USE_HOME_BUTTON) #define LULZBOT_AFTER_Z_HOME_ACTION \ if(home_all || homeZ) { \ LULZBOT_G92_Z(LULZBOT_AFTER_Z_HOME_Z_ORIGIN); \ LULZBOT_G0_Z(LULZBOT_AFTER_Z_HOME_Z_RAISE); \ } #else #define LULZBOT_AFTER_Z_HOME_ACTION #endif /*********************** AUTOLEVELING / BED PROBE *******************************/ #if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) #define LULZBOT_LEFT_PROBE_BED_POSITION 0 #define LULZBOT_RIGHT_PROBE_BED_POSITION 164 #define LULZBOT_BACK_PROBE_BED_POSITION 162 #define LULZBOT_FRONT_PROBE_BED_POSITION -6 #elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_TAZ_BED) #define LULZBOT_LEFT_PROBE_BED_POSITION -9 #define LULZBOT_RIGHT_PROBE_BED_POSITION 288 #define LULZBOT_BACK_PROBE_BED_POSITION 289 #define LULZBOT_FRONT_PROBE_BED_POSITION -9 #endif #if defined(LULZBOT_USE_AUTOLEVELING) #define LULZBOT_NOZZLE_CLEAN_FEATURE // Select type of leveling to use: //#define LULZBOT_AUTO_BED_LEVELING_BILINEAR #define LULZBOT_AUTO_BED_LEVELING_3POINT #endif #if defined(LULZBOT_AUTO_BED_LEVELING_3POINT) // Experimental three point leveling. #define LULZBOT_ABL_PROBE_PT_1_X LULZBOT_LEFT_PROBE_BED_POSITION #define LULZBOT_ABL_PROBE_PT_1_Y LULZBOT_FRONT_PROBE_BED_POSITION #define LULZBOT_ABL_PROBE_PT_2_X LULZBOT_RIGHT_PROBE_BED_POSITION #define LULZBOT_ABL_PROBE_PT_2_Y LULZBOT_FRONT_PROBE_BED_POSITION #define LULZBOT_ABL_PROBE_PT_3_X LULZBOT_RIGHT_PROBE_BED_POSITION #define LULZBOT_ABL_PROBE_PT_3_Y LULZBOT_BACK_PROBE_BED_POSITION #elif defined(LULZBOT_AUTO_BED_LEVELING_BILINEAR) // Traditionally LulzBot printers have employed a four-point leveling // using a degenerate 2x2 grid. This is the traditional behavior. #define LULZBOT_GRID_MAX_POINTS_X 2 #define LULZBOT_GRID_MAX_POINTS_Y 2 #if defined(LULZBOT_IS_MINI) // We can't control the order of probe points exactly, // but on a Mini setting this makes the probe look better. #define LULZBOT_PROBE_Y_FIRST #endif #endif /* Auto-leveling was introduced on the Mini and TAZ 6. * Define probe parameters related to bed leveling, * e.g. the washers on the bed. These are confusingly * named Z_MIN_PROBE in Marlin. The Z-Home switch * is called Z_MIN_ENDSTOP */ #if defined(LULZBOT_USE_AUTOLEVELING) #define LULZBOT_FIX_MOUNTED_PROBE #define LULZBOT_PROBE_POINTS_OUTSIDE_OF_BED #endif // LULZBOT_USE_AUTOLEVELING #define LULZBOT_PROBE_DOUBLE_TOUCH #define LULZBOT_X_PROBE_OFFSET_FROM_EXTRUDER 0 #define LULZBOT_Y_PROBE_OFFSET_FROM_EXTRUDER 0 #define LULZBOT_Z_PROBE_OFFSET_RANGE_MIN -2 #define LULZBOT_Z_PROBE_OFFSET_RANGE_MAX 5 #define LULZBOT_XY_PROBE_SPEED 6000 #define LULZBOT_Z_PROBE_SPEED_SLOW (1*60) #define LULZBOT_Z_PROBE_SPEED_FAST (8*60) #define LULZBOT_Z_CLEARANCE_DEPLOY_PROBE 5 #define LULZBOT_Z_CLEARANCE_BETWEEN_PROBES 5 /* On the Finch Aero toolhead, we need to disable the extruder * motor as it causes noise on the probe line on Foxglove Minis. */ #if defined(LULZBOT_IS_MINI) && defined(TOOLHEAD_Finch_Aerostruder) #define LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(probing) \ if(probing) { \ disable_E0(); \ } else { \ enable_E0(); \ } #else #define LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(probing) #endif /* Enable the probe pins only only when homing/probing, * as this helps reduce EMI by grounding the lines. * * On Mini: * Z_MIN_PIN are the bed washers. * * On TAZ: * Z_MIN_PIN corresponds to the Z-Home push button. * Z_MIN_PROBE_PIN are the bed washers. */ #define LULZBOT_SET_PIN_STATE(pin, enable) \ if(enable) { \ /* Set as inputs with pull-up resistor */ \ SET_INPUT(pin); \ WRITE(pin, HIGH); \ } else { \ /* Ground to prevent EMI */ \ SET_OUTPUT(pin); \ WRITE(pin, LOW); \ } #if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) #define LULZBOT_ENABLE_PROBE_PINS(enable) { \ endstops.enable_z_probe(enable); \ LULZBOT_SET_PIN_STATE(Z_MIN_PIN, enable) \ LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(enable) \ } #elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_USE_HOME_BUTTON) #define LULZBOT_ENABLE_PROBE_PINS(enable) { \ endstops.enable_z_probe(enable); \ LULZBOT_SET_PIN_STATE(Z_MIN_PIN, enable) \ LULZBOT_SET_PIN_STATE(LULZBOT_Z_MIN_PROBE_PIN, enable) \ } #else #define LULZBOT_ENABLE_PROBE_PINS(enable) #endif /* Make it so M42 S controls the state of the /* probe lines. This is useful for troubleshooting. */ #define LULZBOT_M42_TOGGLES_PROBE_PINS \ if (!parser.seenval('P')) { \ LULZBOT_ENABLE_PROBE_PINS(pin_status); \ return; \ } /*************************** COMMON TOOLHEADS PARAMETERS ***********************/ #define LULZBOT_DEFAULT_EJERK 10.0 /**************************** MINI TOOLHEADS ***********************************/ #if defined(TOOLHEAD_Gladiola_SingleExtruder) || defined(TOOLHEAD_Albatross_Flexystruder) || defined(TOOLHEAD_Finch_Aerostruder) #define LULZBOT_EXTRUDERS 1 #define LULZBOT_TOOLHEAD_X_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_X_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0 #define LULZBOT_MOTOR_CURRENT_E 1250 // mA #endif /* TOOLHEAD_Gladiola_SingleExtruder || TOOLHEAD_Albatross_Flexystruder || TOOLHEAD_Finch_Aerostruder */ #if defined(TOOLHEAD_Gladiola_SingleExtruder) #define LULZBOT_LCD_TOOLHEAD_NAME "Single Extruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "SingleExtruder" #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_AO_Hexagon #define LULZBOT_E_STEPS 833 #endif /* TOOLHEAD_Gladiola_SingleExtruder */ #if defined(TOOLHEAD_Albatross_Flexystruder) #define LULZBOT_LCD_TOOLHEAD_NAME "Flexystruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "Flexystruder" #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_AO_Hexagon #define LULZBOT_E_STEPS 833 #endif /* TOOLHEAD_Albatross_Flexystruder */ #if defined(TOOLHEAD_Finch_Aerostruder) // Prototype Aero toolhead for Mini #define LULZBOT_LCD_TOOLHEAD_NAME "Aerostruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "Aerostruder" #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_E3D_Titan_Aero #define LULZBOT_E_STEPS 420 #endif /* TOOLHEAD_Finch_Aerostruder */ /******************************** TAZ TOOLHEADS ********************************/ #if defined(TOOLHEAD_Tilapia_SingleExtruder) || defined(TOOLHEAD_Angelfish_Aerostruder) #define LULZBOT_EXTRUDERS 1 #define LULZBOT_TOOLHEAD_X_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_X_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0 #endif /* TOOLHEAD_Tilapia_SingleExtruder || TOOLHEAD_Angelfish_Aerostruder */ #if defined(TOOLHEAD_Tilapia_SingleExtruder) #define LULZBOT_LCD_TOOLHEAD_NAME "Single Extruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "SingleExtruder" #define LULZBOT_MOTOR_CURRENT_E 750 // mA #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP #define LULZBOT_AO_Hexagon #define LULZBOT_E_STEPS 830 #endif /* TOOLHEAD_Tilapia_SingleExtruder */ #if defined(TOOLHEAD_Angelfish_Aerostruder) // Prototype Aero for TAZ #define LULZBOT_LCD_TOOLHEAD_NAME "Aerostruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "Aerostruder" #define LULZBOT_MOTOR_CURRENT_E 875 // mA #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP #define LULZBOT_E3D_Titan_Aero #define LULZBOT_E_STEPS 420 #endif /* TOOLHEAD_Angelfish_Aerostruder */ #if defined(TOOLHEAD_Kanyu_Flexystruder) #define LULZBOT_LCD_TOOLHEAD_NAME "Flexystruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "Flexystruder" #define LULZBOT_MOTOR_CURRENT_E 410 // mA #define LULZBOT_EXTRUDERS 1 #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_TOOLHEAD_X_MAX_ADJ 12 #define LULZBOT_TOOLHEAD_X_MIN_ADJ 7 #define LULZBOT_TOOLHEAD_Y_MAX_ADJ 1 #define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0 #define LULZBOT_AO_Hexagon #define LULZBOT_E_STEPS 830 #endif /* TOOLHEAD_Kanyu_Flexystruder */ #if defined(TOOLHEAD_Opah_Moarstruder) #define LULZBOT_LCD_TOOLHEAD_NAME "MOARstruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "MOARstruder" #define LULZBOT_DEFAULT_ACCELERATION 250 #define LULZBOT_DEFAULT_TRAVEL_ACCELERATION 250 #define LULZBOT_MOTOR_CURRENT_E 750 // mA #define LULZBOT_EXTRUDERS 1 #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_TOOLHEAD_X_MAX_ADJ 10 #define LULZBOT_TOOLHEAD_X_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0 #define LULZBOT_Moarstruder #define LULZBOT_E_STEPS 830 #endif /* TOOLHEAD_Opah_Moarstruder */ #if defined(TOOLHEAD_Javelin_DualExtruderV2) || defined(TOOLHEAD_Longfin_FlexyDually) || defined(TOOLHEAD_Yellowfin_DualExtruderV3) || defined(TOOLHEAD_Devel_ServoDual) #define LULZBOT_EXTRUDER_FAN_ON_PIN_6 // For backwards compatibility with TAZ 4 #define LULZBOT_MOTOR_CURRENT_E0 875 // mA #define LULZBOT_MOTOR_CURRENT_E1 875 // mA #define LULZBOT_EXTRUDERS 2 #define LULZBOT_TOOLHEAD_X_MAX_ADJ 12 #define LULZBOT_TOOLHEAD_X_MIN_ADJ 2 #define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0 #define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0 #define LULZBOT_TEMP_SENSOR_1 5 #define LULZBOT_NO_MOVE_ON_TOOLHEAD_CHANGE #define LULZBOT_DISTINCT_E_FACTORS #endif /* TOOLHEAD_Javelin_DualExtruderV2 || TOOLHEAD_Longfin_FlexyDually || TOOLHEAD_Yellowfin_DualExtruderV3 */ #if defined(TOOLHEAD_Javelin_DualExtruderV2) #define LULZBOT_LCD_TOOLHEAD_NAME "Dual Extruder 2" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "DualExtruder v2" #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 48 #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_E_STEPS 830 #define LULZBOT_AO_Hexagon #endif /* TOOLHEAD_Javelin_DualExtruderV2 */ #if defined(TOOLHEAD_Longfin_FlexyDually) #define LULZBOT_LCD_TOOLHEAD_NAME "FlexyDually v2" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "FlexyDually v2" #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 48 #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_E_STEPS 830 #define LULZBOT_AO_Hexagon #endif /* TOOLHEAD_Longfin_FlexyDually */ #if defined(TOOLHEAD_Yellowfin_DualExtruderV3) // Prototype Dual v3 for TAZ. #define LULZBOT_LCD_TOOLHEAD_NAME "Dual Extruder 3" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "DualExtruder v3" #undef LULZBOT_AFTER_Z_HOME_Z_RAISE #define LULZBOT_AFTER_Z_HOME_Z_RAISE 16 #undef LULZBOT_AFTER_Z_HOME_Z_ORIGIN #define LULZBOT_AFTER_Z_HOME_Z_ORIGIN 5.5 #define LULZBOT_TOOLHEAD_WIPE_X1_ADJ -6 #define LULZBOT_TOOLHEAD_WIPE_X2_ADJ -6 #define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0 #define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0 #undef LULZBOT_Z_HOMING_HEIGHT #define LULZBOT_Z_HOMING_HEIGHT 10 #undef LULZBOT_Z_CLEARANCE_DEPLOY_PROBE #define LULZBOT_Z_CLEARANCE_DEPLOY_PROBE 10 #undef LULZBOT_Z_CLEARANCE_BETWEEN_PROBES #define LULZBOT_Z_CLEARANCE_BETWEEN_PROBES 10 #undef LULZBOT_BACK_PROBE_BED_POSITION #define LULZBOT_BACK_PROBE_BED_POSITION 293 #if defined(LULZBOT_USE_HOME_BUTTON) #undef LULZBOT_Z_SAFE_HOMING_X_POINT #undef LULZBOT_Z_SAFE_HOMING_Y_POINT #define LULZBOT_Z_SAFE_HOMING_X_POINT (-22) // X point for Z homing when homing all axis (G28) #define LULZBOT_Z_SAFE_HOMING_Y_POINT (265) // Y point for Z homing when homing all axis (G28) #endif /* LULZBOT_USE_HOME_BUTTON */ #undef LULZBOT_TOOLHEAD_X_MAX_ADJ #define LULZBOT_TOOLHEAD_X_MAX_ADJ 10 #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP #define LULZBOT_SWAP_EXTRUDERS #undef LULZBOT_INVERT_E1_DIR #define LULZBOT_INVERT_E1_DIR false #define LULZBOT_E_STEPS 760 #define LULZBOT_E3D_SOMEstruder_x2 #endif /* TOOLHEAD_Yellowfin_DualExtruderV3 */ #if defined(TOOLHEAD_Devel_ServoDual) // Experimental dual nozzle using a servo #define LULZBOT_LCD_TOOLHEAD_NAME "Servo McStruder" // 16 chars max ^^^^^^^^^^^^^^^ #define LULZBOT_M115_EXTRUDER_TYPE "ServoMcStruder" #define LULZBOT_NUM_SERVOS 1 #define LULZBOT_SWITCHING_EXTRUDER_NO_REVERSE #define LULZBOT_SWITCHING_EXTRUDER #define LULZBOT_SWITCHING_NOZZLE #define LULZBOT_SWITCHING_SERVO_ANGLES { 0, 67 } #undef LULZBOT_TOOLHEAD_X_MIN_ADJ #define LULZBOT_TOOLHEAD_X_MIN_ADJ 14 #define LULZBOT_E_STEPS 420 #define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NO_ENDSTOP #define LULZBOT_AO_Hexagon #endif /* TOOLHEAD_Devel_ServoDual */ /************************ CUSTOMIZE VERSION STRING ***************************/ // The Makefile and build-lulzbot-firmware.sh has an option to generate // firmware without any identifying version or build timestamp. This is // used in internal testing to allow us to binary diff across .hex files. #if defined(LULZBOT_MASK_VERSION) #undef LULZBOT_FW_VERSION #define LULZBOT_FW_VERSION ".xx" #endif #define LULZBOT_DETAILED_BUILD_VERSION " FIRMWARE_VERSION:" SHORT_BUILD_VERSION LULZBOT_FW_VERSION " EXTRUDER_TYPE:" LULZBOT_M115_EXTRUDER_TYPE #define LULZBOT_STRING_DISTRIBUTION_DATE __DATE__ __TIME__ #define LULZBOT_SOURCE_CODE_URL "https://code.alephobjects.com/diffusion/MARLIN" /*************************** TEMPERATURE SETTINGS *****************************/ #define LULZBOT_TEMP_SENSOR_0 5 #define LULZBOT_TEMP_SENSOR_BED 7 #define LULZBOT_TEMP_RESIDENCY_TIME 1 #define LULZBOT_TEMP_HYSTERESIS 10 #define LULZBOT_TEMP_WINDOW 10 #define LULZBOT_TEMP_BED_RESIDENCY_TIME 1 #define LULZBOT_TEMP_BED_HYSTERESIS 5 #define LULZBOT_TEMP_BED_WINDOW 5 #define LULZBOT_HEATER_MAXTEMP 305 #define LULZBOT_EXTRUDE_MINTEMP 120 #define LULZBOT_THERMAL_PROTECTION_PERIOD 15 // Seconds #define LULZBOT_THERMAL_PROTECTION_HYSTERESIS 30 // Degrees Celsius #define LULZBOT_THERMAL_PROTECTION_BED_PERIOD 15 // Seconds #define LULZBOT_THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius #if defined(LULZBOT_IS_MINI) // Heater current: 24V/5.5 Ohms = 4.4A #define LULZBOT_MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define LULZBOT_WATCH_TEMP_PERIOD 20 // Seconds #define LULZBOT_WATCH_TEMP_INCREASE 2 // Degrees Celsius #elif defined(LULZBOT_IS_TAZ) // Heater current: 24V/1.6 Ohms = 15A // Set Max Bed Power to 80% for a safety margin on the 15A fuse. #define LULZBOT_MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current #define LULZBOT_WATCH_TEMP_PERIOD 40 // Seconds #define LULZBOT_WATCH_TEMP_INCREASE 10 // Degrees Celsius #endif // Marlin 1.1.5 no longer issues MIN_TEMP errors and appears to handle // thermal runaway via other means. However, since our users expect a // MIN_TEMP error when disconnecting their print head, this could be // perceived as a safety issue. This is a workaround in "temperature.cpp" // to re-enable that functionality. #define LULZBOT_MIN_TEMP_WORKAROUND \ static int delayBeforeStartMeasuring = OVERSAMPLENR; \ if(delayBeforeStartMeasuring > 0) { \ delayBeforeStartMeasuring--; \ } else { \ if (current_temperature[e] > HEATER_0_MAXTEMP) max_temp_error(0); \ if (current_temperature[e] < HEATER_0_MINTEMP) min_temp_error(0); \ } /******************************** HEATING ELEMENTS *****************************/ #define LULZBOT_PIDTEMP #define LULZBOT_PIDTEMPBED // Hotend variants #if defined(LULZBOT_Moarstruder) // LulzBot MOARstruder (40v) #define LULZBOT_DEFAULT_Kp 55.64 #define LULZBOT_DEFAULT_Ki 6.79 #define LULZBOT_DEFAULT_Kd 113.94 #endif /* LULZBOT_Moarstruder */ #if defined(LULZBOT_E3D_SOMEstruder_x2) // Side-by-side LulzBot E3D SOMEstruder (24v) on Yellowfin Dual #define LULZBOT_DEFAULT_Kp 47.45 #define LULZBOT_DEFAULT_Ki 4.83 #define LULZBOT_DEFAULT_Kd 116.63 #endif /* LULZBOT_E3D_SOMEstruder_x2 */ #if defined(LULZBOT_AO_Hexagon) // LulzBot AO-Hexagon (24v) #define LULZBOT_DEFAULT_Kp 28.79 #define LULZBOT_DEFAULT_Ki 1.91 #define LULZBOT_DEFAULT_Kd 108.51 #endif /* LULZBOT_AO_Hexagon */ #if defined(LULZBOT_E3D_Titan_Aero) // LulzBot V6 block with E3D Titan Aero #define LULZBOT_DEFAULT_Kp 19.83 #define LULZBOT_DEFAULT_Ki 1.53 #define LULZBOT_DEFAULT_Kd 64.16 #endif /* LULZBOT_E3D_Titan_Aero */ // Heated bed variants //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+) #if defined(LULZBOT_TAZ_BED) && !defined(LULZBOT_TWO_PIECE_BED) #define LULZBOT_DEFAULT_bedKp 162 #define LULZBOT_DEFAULT_bedKi 17 #define LULZBOT_DEFAULT_bedKd 378 // Modular two piece bed (TAZ 7+) #elif defined(LULZBOT_TAZ_BED) && defined(LULZBOT_TWO_PIECE_BED) #define LULZBOT_DEFAULT_bedKp 286.02 #define LULZBOT_DEFAULT_bedKi 54.55 #define LULZBOT_DEFAULT_bedKd 374.90 //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+) #elif defined(LULZBOT_MINI_BED) && !defined(LULZBOT_TWO_PIECE_BED) #define LULZBOT_DEFAULT_bedKp 294 #define LULZBOT_DEFAULT_bedKi 65 #define LULZBOT_DEFAULT_bedKd 382 // Modular two piece bed (Mini 2+) #elif defined(LULZBOT_MINI_BED) && defined(LULZBOT_TWO_PIECE_BED) #define LULZBOT_DEFAULT_bedKp 384.33 #define LULZBOT_DEFAULT_bedKi 72.17 #define LULZBOT_DEFAULT_bedKd 511.64 #endif /****************************** FAN CONFIGURATION ******************************/ // For the Pelonis C4010L24BPLB1b-7 fan, we need a relative low // PWM frequency of about 122Hz in order for the fan to turn. // By default, FAST_PWM_FAN appears to PWM at ~31kHz, but if we // set a prescale of 4, it divides this by 256 to get us down to // the frequency we need. #define LULZBOT_FAST_PWM_FAN #define LULZBOT_FAST_PWM_SCALE 4 #define LULZBOT_FAN_KICKSTART_TIME 100 #define LULZBOT_FAN_MIN_PWM 70 #define LULZBOT_USE_CONTROLLER_FAN #if defined(LULZBOT_IS_MINI) // The Mini fan runs rather loud at full speed. #define LULZBOT_CONTROLLERFAN_SPEED 120 #else #define LULZBOT_CONTROLLERFAN_SPEED 255 #endif // As of Marlin 1.1.5, FAST_PWM_FAN adjusts the frequencies for // all fans except the controller fan. This workaround allows // the controller fan PWM freq to be adjusted to 122Hz (this // may not be necessary, but since the Pelonis fan likes 122Hz, // we are trying to keep all the fan frequencies at that). #define LULZBOT_FAST_PWM_CONTROLLER_FAN_WORKAROUND /******************************* AXIS TRAVEL LIMITS *****************************/ /* Define min and max travel limits based on the printer model using a standard * toolhead, then define adjustments from the standard for alternative toolheads. * This allows us to accomodate toolheads that might be wider or taller than the * standard. */ #if defined(LULZBOT_IS_MINI) #define LULZBOT_STANDARD_X_MAX_POS 165 #define LULZBOT_STANDARD_X_MIN_POS 0 #define LULZBOT_STANDARD_Y_MAX_POS 191 #define LULZBOT_STANDARD_Y_MIN_POS -6 #define LULZBOT_X_BED_SIZE 155 #define LULZBOT_Y_BED_SIZE 155 #elif defined(LULZBOT_Juniper_TAZ5) #define LULZBOT_STANDARD_X_MAX_POS 298 #define LULZBOT_STANDARD_X_MIN_POS 0 #define LULZBOT_STANDARD_Y_MAX_POS 276 #define LULZBOT_STANDARD_Y_MIN_POS 0 #define LULZBOT_X_BED_SIZE 288 #define LULZBOT_Y_BED_SIZE 275 #elif defined(LULZBOT_Quiver_TAZ7) #define LULZBOT_STANDARD_X_MAX_POS 300 #define LULZBOT_STANDARD_X_MIN_POS -16 #define LULZBOT_STANDARD_Y_MAX_POS 303 #define LULZBOT_STANDARD_Y_MIN_POS -20 #define LULZBOT_X_BED_SIZE 280 #define LULZBOT_Y_BED_SIZE 280 #elif defined(LULZBOT_IS_TAZ) #define LULZBOT_STANDARD_X_MAX_POS 300 #define LULZBOT_STANDARD_X_MIN_POS -20 #define LULZBOT_STANDARD_Y_MAX_POS 303 #define LULZBOT_STANDARD_Y_MIN_POS -20 #define LULZBOT_X_BED_SIZE 280 #define LULZBOT_Y_BED_SIZE 280 #endif #if defined(LULZBOT_Gladiola_Mini) || defined(LULZBOT_Gladiola_MiniLCD) #define LULZBOT_STANDARD_Z_MIN_POS -2 #define LULZBOT_STANDARD_Z_MAX_POS 159 #elif defined(LULZBOT_Hibiscus_Mini2) || defined(LULZBOT_Hibiscus_Mini2LCD) #define LULZBOT_STANDARD_Z_MIN_POS 0 #define LULZBOT_STANDARD_Z_MAX_POS 178 #elif defined(LULZBOT_Juniper_TAZ5) #define LULZBOT_STANDARD_Z_MIN_POS 0 #define LULZBOT_STANDARD_Z_MAX_POS 250 #elif defined(LULZBOT_Oliveoil_TAZ6) #define LULZBOT_STANDARD_Z_MIN_POS 0 #define LULZBOT_STANDARD_Z_MAX_POS 270 #elif defined(LULZBOT_Quiver_TAZ7) #define LULZBOT_STANDARD_Z_MIN_POS 0 #define LULZBOT_STANDARD_Z_MAX_POS 299 #endif #define LULZBOT_X_MAX_POS (LULZBOT_STANDARD_X_MAX_POS - LULZBOT_TOOLHEAD_X_MAX_ADJ) #define LULZBOT_X_MIN_POS (LULZBOT_STANDARD_X_MIN_POS - LULZBOT_TOOLHEAD_X_MIN_ADJ) #define LULZBOT_Y_MAX_POS (LULZBOT_STANDARD_Y_MAX_POS - LULZBOT_TOOLHEAD_Y_MAX_ADJ) #define LULZBOT_Y_MIN_POS (LULZBOT_STANDARD_Y_MIN_POS - LULZBOT_TOOLHEAD_Y_MIN_ADJ) #define LULZBOT_Z_MAX_POS (LULZBOT_STANDARD_Z_MAX_POS - LULZBOT_TOOLHEAD_Z_MAX_ADJ) #define LULZBOT_Z_MIN_POS (LULZBOT_STANDARD_Z_MIN_POS - LULZBOT_TOOLHEAD_Z_MIN_ADJ) /**************************** ENDSTOP CONFIGURATION ****************************/ #if defined(LULZBOT_USE_MIN_ENDSTOPS) #define LULZBOT_USE_XMIN_PLUG #define LULZBOT_USE_YMIN_PLUG #define LULZBOT_USE_ZMIN_PLUG #endif // Z-Max Endstops were introduced on the Mini and TAZ 6 #if defined(LULZBOT_USE_MAX_ENDSTOPS) #define LULZBOT_USE_XMAX_PLUG #define LULZBOT_USE_YMAX_PLUG #define LULZBOT_USE_ZMAX_PLUG #endif #define LULZBOT_ENDSTOPS_ALWAYS_ON_DEFAULT #define LULZBOT_ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED // Workaround for bug in Marlin 1.1.5 where motion is stopped a X or Y = 0 #define LULZBOT_MIN_SOFTWARE_ENDSTOPS_DISABLED // The RAMBO does not support interrupts on all pins // so leave the ENDSTOP_INTERRUPTS_FEATURE disabled //#define LULZBOT_ENDSTOP_INTERRUPTS_FEATURE /* Endstop settings are determined by printer model, except for the * X_MAX which varies by toolhead. */ #if defined(LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS) // TAZ 6+ and Huerfano Mini onwards use normally closed endstops. // This is safer, as a loose connector or broken wire will halt // the axis #define LULZBOT_X_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP #define LULZBOT_Y_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP // LULZBOT_X_MAX_ENDSTOP_INVERTING varies by toolhead #define LULZBOT_Y_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP #define LULZBOT_Z_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP #elif defined(LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS) #define LULZBOT_X_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_Y_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP // LULZBOT_X_MAX_ENDSTOP_INVERTING varies by toolhead #define LULZBOT_Y_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_Z_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #endif // Electrical probing pins are always open until contact is made #define LULZBOT_Z_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP #define LULZBOT_Z_MIN_PROBE_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP /**************************** ADVANCED PAUSE FEATURE ****************************/ #if defined(LULZBOT_USE_LCD_DISPLAY) #define LULZBOT_ADVANCED_PAUSE_FEATURE #define LULZBOT_HOME_BEFORE_FILAMENT_CHANGE #define LULZBOT_PARK_HEAD_ON_PAUSE #define LULZBOT_PAUSE_PARK_X_POS 10 #define LULZBOT_PAUSE_PARK_Y_POS LULZBOT_Y_MAX_POS - 10 #endif /*********************************** WIPER PAD **********************************/ // Nozzle wiping points (varies by toolhead, as the nozzle position varies) #if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) // Mini has a horizontal wiping pad on the back of the bed #define LULZBOT_STANDARD_WIPE_X1 115 #define LULZBOT_STANDARD_WIPE_X2 45 #define LULZBOT_STANDARD_WIPE_Y1 173 #define LULZBOT_STANDARD_WIPE_Y2 173 #elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_TAZ_BED) // TAZ has a vertical wiping pad on the left side of the bed #define LULZBOT_STANDARD_WIPE_X1 -16 #define LULZBOT_STANDARD_WIPE_X2 -16 #define LULZBOT_STANDARD_WIPE_Y1 95 #define LULZBOT_STANDARD_WIPE_Y2 25 #endif #define LULZBOT_NOZZLE_CLEAN_START_POINT { \ LULZBOT_STANDARD_WIPE_X1 + LULZBOT_TOOLHEAD_WIPE_X1_ADJ, \ LULZBOT_STANDARD_WIPE_Y1 + LULZBOT_TOOLHEAD_WIPE_Y1_ADJ, \ 1 \ } #define LULZBOT_NOZZLE_CLEAN_END_POINT { \ LULZBOT_STANDARD_WIPE_X2 + LULZBOT_TOOLHEAD_WIPE_X2_ADJ, \ LULZBOT_STANDARD_WIPE_Y2 + LULZBOT_TOOLHEAD_WIPE_Y2_ADJ, \ 1 \ } /*************************** REWIPE FUNCTIONALITY *******************************/ #define LULZBOT_NUM_REWIPES 1 #if defined(LULZBOT_IS_TAZ) #define LULZBOT_BED_PROBE_MIN 0 // Limit on pushing into the bed #else #define LULZBOT_BED_PROBE_MIN -4 // Limit on pushing into the bed #endif #define LULZBOT_PROBE_Z_WITH_REWIPE(speed) \ /* do_probe_move returns true when it fails to hit an endstop, meaning we need to rewipe */ \ for(int rewipes = 0; do_probe_move(LULZBOT_BED_PROBE_MIN, speed); rewipes++) { \ if(rewipes >= LULZBOT_NUM_REWIPES) { /* max of tries */ \ SERIAL_ERRORLNPGM("PROBE FAIL CLEAN NOZZLE"); /* cura listens for this message specifically */ \ LCD_MESSAGEPGM(MSG_ERR_PROBING_FAILED); /* use a more friendly message on the LCD */ \ BUZZ(25, 880); BUZZ(50, 0); /* play tone */ \ BUZZ(25, 880); BUZZ(50, 0); \ BUZZ(25, 880); BUZZ(50, 0); \ do_blocking_move_to_z(100, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); /* raise head */ \ stop(); /* stop print job */ \ LCD_MESSAGEPGM(MSG_ERR_PROBING_FAILED); /* stop changes the message... */ \ return NAN; /* abort the leveling in progress */ \ } \ SERIAL_ERRORLNPGM(MSG_REWIPE); \ LCD_MESSAGEPGM(MSG_REWIPE); \ do_blocking_move_to_z(10, MMM_TO_MMS(speed)); /* raise nozzle */ \ Nozzle::clean(0, 2, 0, 0); /* wipe nozzle */ \ } /******************************** MOTOR CURRENTS *******************************/ // Values for XYZ vary by printer model, values for E vary by toolhead. #if defined(LULZBOT_Gladiola_Mini) || defined(LULZBOT_Gladiola_MiniLCD) #define LULZBOT_MOTOR_CURRENT_XY 1300 // mA #define LULZBOT_MOTOR_CURRENT_Z 1630 // mA #elif defined(LULZBOT_Hibiscus_Mini2) || defined(LULZBOT_Hibiscus_Mini2LCD) #define LULZBOT_MOTOR_CURRENT_XY 1300 // mA #define LULZBOT_MOTOR_CURRENT_Z 1000 // mA #elif defined(LULZBOT_Juniper_TAZ5) #define LULZBOT_MOTOR_CURRENT_XY 950 // mA #define LULZBOT_MOTOR_CURRENT_Z 1275 // mA #elif defined(LULZBOT_Oliveoil_TAZ6) #define LULZBOT_MOTOR_CURRENT_XY 950 // mA #define LULZBOT_MOTOR_CURRENT_Z 1075 // mA #elif defined(LULZBOT_Quiver_TAZ7) #define LULZBOT_MOTOR_CURRENT_XY 950 // mA #define LULZBOT_MOTOR_CURRENT_Z 950 // mA #endif /************ ACCELERATION, FEEDRATES AND XYZ MOTOR STEPS *******************/ // Values for XYZ vary by printer model, values for E vary by toolhead. #if defined(LULZBOT_IS_MINI) #define LULZBOT_XY_STEPS 100.5 #define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 8, 40} // (mm/sec) #define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,100,1000} #define LULZBOT_DEFAULT_XJERK 12.0 #define LULZBOT_DEFAULT_YJERK 12.0 #define LULZBOT_DEFAULT_ZJERK 0.4 #define LULZBOT_DEFAULT_ACCELERATION 2000 #define LULZBOT_DEFAULT_TRAVEL_ACCELERATION 2000 #define LULZBOT_Z_PROBE_OFFSET_FROM_EXTRUDER -1.377 #elif defined(LULZBOT_IS_TAZ) #define LULZBOT_XY_STEPS 100.5 #define LULZBOT_DEFAULT_XJERK 8.0 #define LULZBOT_DEFAULT_YJERK 8.0 #define LULZBOT_DEFAULT_ZJERK 0.4 #if not defined(LULZBOT_DEFAULT_ACCELERATION) #define LULZBOT_DEFAULT_ACCELERATION 500 #endif #if not defined(LULZBOT_DEFAULT_TRAVEL_ACCELERATION) #define LULZBOT_DEFAULT_TRAVEL_ACCELERATION 500 #endif #define LULZBOT_Z_PROBE_OFFSET_FROM_EXTRUDER -1.200 #endif #if defined(LULZBOT_Gladiola_Mini) || defined(LULZBOT_Gladiola_MiniLCD) #define LULZBOT_Z_STEPS 1600 #elif defined(LULZBOT_Hibiscus_Mini2) || defined(LULZBOT_Hibiscus_Mini2LCD) #define Z_FULL_STEPS_PER_ROTATION 200 #define Z_MICROSTEPS 16 #define Z_BELT_PITCH 2 #define Z_PULLEY_TEETH 24 #define Z_MOTOR_GEAR_REDUCTION 26.8512396694 #define LULZBOT_Z_STEPS (Z_FULL_STEPS_PER_ROTATION * Z_MICROSTEPS * Z_MOTOR_GEAR_REDUCTION / double(Z_BELT_PITCH) / double(Z_PULLEY_TEETH)) #undef LULZBOT_DEFAULT_MAX_FEEDRATE #define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 8, 25} // (mm/sec) #elif defined(LULZBOT_Juniper_TAZ5) #define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 3, 25} // (mm/sec) #define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} #define LULZBOT_Z_STEPS 1600 #elif defined(LULZBOT_Oliveoil_TAZ6) #define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 3, 25} // (mm/sec) #define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} #define LULZBOT_Z_STEPS 1600 #elif defined(LULZBOT_Quiver_TAZ7) // Prototype Z-belt driven TAZ 7 #define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 10, 25} // (mm/sec) #define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,10,10000} #define LULZBOT_Z_STEPS 1790.08264463 #endif #if defined(LULZBOT_IS_MINI) #define LULZBOT_PWM_MOTOR_CURRENT { \ LULZBOT_MOTOR_CURRENT_XY, \ LULZBOT_MOTOR_CURRENT_Z, \ LULZBOT_MOTOR_CURRENT_E \ } // Values in milliamps #elif defined(LULZBOT_IS_TAZ) // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) #define DIGIPOT_CURRENT(mA) ((mA-750)/5+135) #if LULZBOT_EXTRUDERS == 2 #define LULZBOT_DIGIPOT_MOTOR_CURRENT { \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_Z), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E0), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E1) \ } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) #else #define LULZBOT_DIGIPOT_MOTOR_CURRENT { \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_Z), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E), \ DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E) \ } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) #endif #else #error Motor currents not defined #endif #if defined(LULZBOT_DISTINCT_E_FACTORS) && LULZBOT_EXTRUDERS == 2 && !defined(LULZBOT_SWITCHING_EXTRUDER) #define LULZBOT_DEFAULT_AXIS_STEPS_PER_UNIT {LULZBOT_XY_STEPS,LULZBOT_XY_STEPS,LULZBOT_Z_STEPS,LULZBOT_E_STEPS,LULZBOT_E_STEPS} #else #define LULZBOT_DEFAULT_AXIS_STEPS_PER_UNIT {LULZBOT_XY_STEPS,LULZBOT_XY_STEPS,LULZBOT_Z_STEPS,LULZBOT_E_STEPS} #endif /*********************************** LCD OPTIONS *******************************/ #if defined(LULZBOT_USE_LCD_DISPLAY) #define LULZBOT_REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER #define LULZBOT_SDSUPPORT #define LULZBOT_XYZ_HOLLOW_FRAME_DISABLE #define LULZBOT_MENU_HOLLOW_FRAME_DISABLE #define LULZBOT_USE_SMALL_INFOFONT #if defined(LULZBOT_USE_AUTOLEVELING) #define LULZBOT_BABYSTEPPING #define LULZBOT_BABYSTEP_ZPROBE_OFFSET #define LULZBOT_MENU_BED_LEVELING_GCODE "G28 XY\nM109 S175\nG28 Z\nM109 R145\nG12\nG29\nM104 S0" #endif #define LULZBOT_SHOW_CUSTOM_BOOTSCREEN #define LULZBOT_ENCODER_PULSES_PER_STEP 2 #define LULZBOT_ENCODER_STEPS_PER_MENU_ITEM 1 #define LULZBOT_COOLING_MESSAGES #if defined(LULZBOT_Gladiola_MiniLCD) || defined(LULZBOT_Hibiscus_Mini2LCD) // In the experimental Gladiola_MiniLCD, the encoder direction is reversed. #define LULZBOT_REVERSE_ENCODER_DIRECTION #endif /* Marlin shows three extruders on a dual: * Extruder - The active nozzle (varies) * Extruder 1 - The primary extruder * Extruder 2 - The secondary extruder * * The following causes the active nozzle to be * hidden as seeing three nozzles may be * confusing to users. */ #define LULZBOT_HIDE_ACTIVE_NOZZLE_IN_LCD #define LULZBOT_HIDE_PID_CONFIG_IN_LCD #define LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD #define LULZBOT_SCROLL_LONG_FILE_NAMES #define LULZBOT_REORDERED_MENUS #endif /***************************** CUSTOM SPLASH SCREEN *****************************/ #define LULZBOT_CUSTOM_BOOTSCREEN() \ u8g.firstPage(); \ do { \ u8g.drawBitmapP(0,0,CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8),CUSTOM_BOOTSCREEN_BMPHEIGHT,custom_start_bmp); \ u8g.setFont(u8g_font_6x13); \ u8g.drawStr(61,17,LULZBOT_LCD_MACHINE_NAME); \ u8g.setFont(u8g_font_04b_03); \ u8g.drawStr(62,28,LULZBOT_LCD_TOOLHEAD_NAME); \ u8g.setFont(u8g_font_5x8); \ u8g.drawStr(63,41,"LulzBot.com"); \ u8g.setFont(u8g_font_5x8); \ u8g.drawStr(62,62,"v"); \ u8g.drawStr(67,62,SHORT_BUILD_VERSION LULZBOT_FW_VERSION); \ } while( u8g.nextPage() ); /************************* Z-OFFSET LCD ADJUSTMENT ******************************/ // Gralco's customized Z Offset LCD overlay (also requires dogm_bitmaps_Lulzbot.h) #define LULZBOT_ZOFFSET_OVERLAY(zprobe_zoffset) \ static int dir = 0; \ static float old_zprobe_zoffset = 0; \ if(zprobe_zoffset != old_zprobe_zoffset) { \ dir = (zprobe_zoffset > old_zprobe_zoffset) ? 1 : -1; \ old_zprobe_zoffset = zprobe_zoffset; \ } \ const int left = 5; \ const int right = 90; \ const int nozzle = 60; \ u8g.drawBitmapP(nozzle + 6, 4 - dir,2,12,nozzle_bmp); \ u8g.drawBitmapP(nozzle + 0,20,3,1,offset_bedline_bmp); \ u8g.drawBitmapP(left + 0, 47, 3, 16, ccw_bmp); \ u8g.drawBitmapP(right + 0, 47, 3, 16, cw_bmp); \ u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp); \ u8g.drawBitmapP(left + 20, 49 - dir, 2, 13, down_arrow_bmp); /*************************** Z-OFFSET AUTO-SAVE ********************************/ /* Historically, the Lulzbot firmware would save the Z-Offset into the EEPROM * each time it is changed. The latest Marlin made this more difficult since they * added a CRC to the EEPROM. We work around this by bracketing the EEPROM_READ * and EEPROM_WRITE routines such that the CRC ignores the Z-Offset value. That * code also captures the eeprom_index so we can write only that value later. */ /* The following goes in "configuration_store.cpp", before and after * "EEPROM_WRITE(zprobe_zoffset)" and "EEPROM_READ(zprobe_zoffset)" */ #if defined(LULZBOT_USE_AUTOLEVELING) #define LULZBOT_EEPROM_BEFORE_ZOFFSET \ const uint16_t eeprom_saved_crc = working_crc; \ eeprom_zoffset_index = eeprom_index; #define LULZBOT_EEPROM_AFTER_ZOFFSET \ working_crc = eeprom_saved_crc; /* The following goes in "configuration_store.h" */ #define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_DECL \ static int eeprom_zoffset_index; \ static void store_zoffset(); /* The following goes in "configuration_store.cpp" */ #define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_IMPL \ int MarlinSettings::eeprom_zoffset_index = -1; \ void MarlinSettings::store_zoffset() { \ if(eeprom_zoffset_index > 0) { \ uint16_t working_crc; \ int eeprom_index = eeprom_zoffset_index; \ EEPROM_WRITE(zprobe_zoffset); \ SERIAL_ECHO_START(); \ SERIAL_ECHOPAIR("Updating zoffset in EEPROM: ", zprobe_zoffset); \ SERIAL_ECHOPAIR("; EEPROM Index: ", eeprom_zoffset_index); \ SERIAL_ECHOLNPGM(""); \ } \ } /* The following goes in "ultralcd.cpp" in "lcd_babystep_zoffset" */ #define LULZBOT_SAVE_ZOFFSET_TO_EEPROM settings.store_zoffset(); #else #define LULZBOT_EEPROM_BEFORE_ZOFFSET #define LULZBOT_EEPROM_AFTER_ZOFFSET #define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_DECL #define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_IMPL #define LULZBOT_SAVE_ZOFFSET_TO_EEPROM #endif #endif /* CONDITIONALS_LULZBOT */