/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * SanityCheck.h * * Test configuration values for errors at compile-time. */ #ifndef SANITYCHECK_H #define SANITYCHECK_H /** * Due to the high number of issues related with old versions of Arduino IDE * we are now warning our users to update their toolkits. In a future Marlin * release we will stop supporting old IDE versions and will require user * action to proceed with compilation in such environments. */ #if !defined(ARDUINO) || ARDUINO < 10600 #error "Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit." #endif /** * We try our best to include sanity checks for all the changes configuration * directives because people have a tendency to use outdated config files with * the bleding edge source code, but sometimes this is not enough. This check * will force a minimum config file revision, otherwise Marlin will not build. */ #if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION #error You are using an old Configuration.h file, update it before building Marlin. #endif #if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION #error You are using an old Configuration_adv.h file, update it before building Marlin. #endif /** * Marlin release, version and default string */ #ifndef SHORT_BUILD_VERSION #error "SHORT_BUILD_VERSION Information must be specified" #endif #ifndef DETAILED_BUILD_VERSION #error "BUILD_VERSION Information must be specified" #endif #ifndef STRING_DISTRIBUTION_DATE #error "STRING_DISTRIBUTION_DATE Information must be specified" #endif #ifndef PROTOCOL_VERSION #error "PROTOCOL_VERSION Information must be specified" #endif #ifndef MACHINE_NAME #error "MACHINE_NAME Information must be specified" #endif #ifndef SOURCE_CODE_URL #error "SOURCE_CODE_URL Information must be specified" #endif #ifndef DEFAULT_MACHINE_UUID #error "DEFAULT_MACHINE_UUID Information must be specified" #endif #ifndef WEBSITE_URL #error "WEBSITE_URL Information must be specified" #endif /** * Dual Stepper Drivers */ #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && ENABLED(Y_DUAL_STEPPER_DRIVERS) #error "You cannot have dual stepper drivers for both Y and Z." #endif /** * Progress Bar */ #if ENABLED(LCD_PROGRESS_BAR) #if DISABLED(SDSUPPORT) #error "LCD_PROGRESS_BAR requires SDSUPPORT." #endif #if ENABLED(DOGLCD) #error "LCD_PROGRESS_BAR does not apply to graphical displays." #endif #if ENABLED(FILAMENT_LCD_DISPLAY) #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." #endif #endif /** * Babystepping */ #if ENABLED(BABYSTEPPING) #if DISABLED(ULTRA_LCD) #error "BABYSTEPPING requires an LCD controller." #endif #if ENABLED(SCARA) #error "BABYSTEPPING is not implemented for SCARA yet." #endif #if ENABLED(DELTA) && ENABLED(BABYSTEP_XY) #error "BABYSTEPPING only implemented for Z axis on deltabots." #endif #endif /** * Filament Change with Extruder Runout Prevention */ #if ENABLED(FILAMENTCHANGEENABLE) && ENABLED(EXTRUDER_RUNOUT_PREVENT) #error "EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE." #endif /** * Individual axis homing is useless for DELTAS */ #if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA) #error INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics. #endif /** * Options only for EXTRUDERS > 1 */ #if EXTRUDERS > 1 #if EXTRUDERS > 4 #error "The maximum number of EXTRUDERS in Marlin is 4." #endif #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT." #endif #if ENABLED(HEATERS_PARALLEL) #error "EXTRUDERS must be 1 with HEATERS_PARALLEL." #endif #if ENABLED(Y_DUAL_STEPPER_DRIVERS) #error "EXTRUDERS must be 1 with Y_DUAL_STEPPER_DRIVERS." #endif #if ENABLED(Z_DUAL_STEPPER_DRIVERS) #error "EXTRUDERS must be 1 with Z_DUAL_STEPPER_DRIVERS." #endif #elif ENABLED(SINGLENOZZLE) #error "SINGLENOZZLE requires 2 or more EXTRUDERS." #endif /** * Limited number of servos */ #if NUM_SERVOS > 4 #error "The maximum number of SERVOS in Marlin is 4." #endif #if defined(NUM_SERVOS) && NUM_SERVOS > 0 #if X_ENDSTOP_SERVO_NR >= 0 || Y_ENDSTOP_SERVO_NR >= 0 || Z_ENDSTOP_SERVO_NR >= 0 #if X_ENDSTOP_SERVO_NR >= NUM_SERVOS #error "X_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS." #elif Y_ENDSTOP_SERVO_NR >= NUM_SERVOS #error "Y_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS." #elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS." #endif #endif #endif /** * Servo deactivation depends on servo endstops */ #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && DISABLED(HAS_SERVO_ENDSTOPS) #error "At least one of the ?_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE." #endif /** * Required LCD language */ #if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780) #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller." #endif /** * Bed Heating Options - PID vs Limit Switching */ #if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING) #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED." #endif /** * Mesh Bed Leveling */ #if ENABLED(MESH_BED_LEVELING) #if ENABLED(DELTA) #error "MESH_BED_LEVELING does not yet support DELTA printers." #endif #if ENABLED(AUTO_BED_LEVELING_FEATURE) #error "Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both." #endif #if MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7 #error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8." #endif #elif ENABLED(MANUAL_BED_LEVELING) #error "MESH_BED_LEVELING is required for MANUAL_BED_LEVELING." #endif /** * Probes */ #if PROBE_SELECTED /** * A probe needs a pin */ #if !PROBE_PIN_CONFIGURED #error "A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." #endif /** * Z_MIN_PIN and Z_MIN_PROBE_PIN can't co-exist when Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN */ #if HAS_Z_MIN && HAS_Z_MIN_PROBE_PIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) #error "A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." #endif /** * Make sure the plug is enabled if it's used */ #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && DISABLED(USE_ZMIN_PLUG) #error "You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug." #endif /** * Only allow one probe option to be defined */ #if (ENABLED(FIX_MOUNTED_PROBE) && (ENABLED(MECHANICAL_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \ || (ENABLED(MECHANICAL_PROBE) && (ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \ || (ENABLED(Z_PROBE_ALLEN_KEY) && (HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \ || (HAS_Z_ENDSTOP_SERVO && ENABLED(Z_PROBE_SLED)) #error "Please define only one type of probe: Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." #endif /** * Don't allow nonsense probe-pin settings */ #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(Z_MIN_PROBE_ENDSTOP) #error "You can't enable both Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN and Z_MIN_PROBE_ENDSTOP." #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) #error "Don't enable DISABLE_Z_MIN_PROBE_ENDSTOP with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN." #elif ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) && DISABLED(Z_MIN_PROBE_ENDSTOP) #error "DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set." #endif /** * Require a Z probe pin if Z_MIN_PROBE_ENDSTOP is enabled. */ #if ENABLED(Z_MIN_PROBE_ENDSTOP) #if !HAS_Z_MIN_PROBE_PIN #error "Z_MIN_PROBE_ENDSTOP requires a Z_MIN_PROBE_PIN in your board's pins_XXXX.h file." #endif // Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment. //#ifndef NUM_SERVOS // #error "You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP." //#endif //#if defined(NUM_SERVOS) && NUM_SERVOS < 1 // #error "You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP." //#endif //#if Z_ENDSTOP_SERVO_NR < 0 // #error "You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP." //#endif //#ifndef SERVO_ENDSTOP_ANGLES // #error "You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP." //#endif #endif #else /** * Require some kind of probe for bed leveling */ #if ENABLED(AUTO_BED_LEVELING_FEATURE) #error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." #endif #endif /** * Auto Bed Leveling */ #if ENABLED(AUTO_BED_LEVELING_FEATURE) /** * Require a Z min pin */ #if !PIN_EXISTS(Z_MIN) #if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it. #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) #error "You must have a Z_MIN or Z_PROBE endstop to enable Z_MIN_PROBE_REPEATABILITY_TEST." #else #error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin." #endif #endif #endif /** * Check if Probe_Offset * Grid Points is greater than Probing Range */ #if ENABLED(AUTO_BED_LEVELING_GRID) #ifndef DELTA_PROBEABLE_RADIUS // Be sure points are in the right order #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION." #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION." #endif // Make sure probing points are reachable #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe." #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe." #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe." #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe." #endif #endif #else // !AUTO_BED_LEVELING_GRID // Check the triangulation points #if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe." #elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe." #elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe." #elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe." #elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe." #elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe." #endif #endif // !AUTO_BED_LEVELING_GRID #endif // AUTO_BED_LEVELING_FEATURE /** * Advance Extrusion */ #if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE) #error You can enable ADVANCE or LIN_ADVANCE, but not both. #endif /** * Filament Width Sensor */ #if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined." #endif /** * ULTIPANEL encoder */ #if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK) #error "ULTIPANEL requires some kind of encoder." #endif #if ENCODER_PULSES_PER_STEP < 0 #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead." #endif /** * SAV_3DGLCD display options */ #if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106) #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106." #endif /** * Delta has limited bed leveling options */ #if ENABLED(DELTA) #if ENABLED(AUTO_BED_LEVELING_FEATURE) #if DISABLED(AUTO_BED_LEVELING_GRID) #error "Only AUTO_BED_LEVELING_GRID is supported with DELTA." #endif #if ENABLED(Z_PROBE_SLED) #error "You cannot use Z_PROBE_SLED with DELTA." #endif #endif #endif /** * Don't set more than one kinematic type */ #if (ENABLED(DELTA) && (ENABLED(SCARA) || ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ || (ENABLED(SCARA) && (ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ || (ENABLED(COREXY) && (ENABLED(COREXZ) || ENABLED(COREYZ))) \ || (ENABLED(COREXZ) && ENABLED(COREYZ)) #error "Please enable only one of DELTA, SCARA, COREXY, COREXZ, or COREYZ." #endif /** * Allen Key Z probe requires Auto Bed Leveling grid and Delta */ #if ENABLED(Z_PROBE_ALLEN_KEY) && !(ENABLED(AUTO_BED_LEVELING_GRID) && ENABLED(DELTA)) #error "Invalid use of Z_PROBE_ALLEN_KEY." #endif /** * Dual X Carriage requirements */ #if ENABLED(DUAL_X_CARRIAGE) #if EXTRUDERS == 1 #error "DUAL_X_CARRIAGE requires 2 (or more) extruders." #elif ENABLED(COREXY) || ENABLED(COREXZ) #error "DUAL_X_CARRIAGE cannot be used with COREXY or COREXZ." #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined." #elif !HAS_X_MAX #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop." #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS." #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1 #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1." #endif #endif // DUAL_X_CARRIAGE /** * Make sure auto fan pins don't conflict with the fan pin */ #if HAS_AUTO_FAN #if HAS_FAN0 #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN." #elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN." #elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN." #elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN." #endif #endif #endif #if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN." #endif #if HAS_CONTROLLERFAN #if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #endif #endif /** * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set. */ #if !HAS_HEATER_0 #error "HEATER_0_PIN not defined for this board." #elif !PIN_EXISTS(TEMP_0) #error "TEMP_0_PIN not defined for this board." #elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE) #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board." #elif TEMP_SENSOR_0 == 0 #error "TEMP_SENSOR_0 is required." #endif #if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL) #if !HAS_HEATER_1 #error "HEATER_1_PIN not defined for this board." #endif #endif #if HOTENDS > 1 #if TEMP_SENSOR_1 == 0 #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS." #elif !PIN_EXISTS(TEMP_1) #error "TEMP_1_PIN not defined for this board." #endif #if HOTENDS > 2 #if TEMP_SENSOR_2 == 0 #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS." #elif !HAS_HEATER_2 #error "HEATER_2_PIN not defined for this board." #elif !PIN_EXISTS(TEMP_2) #error "TEMP_2_PIN not defined for this board." #endif #if HOTENDS > 3 #if TEMP_SENSOR_3 == 0 #error "TEMP_SENSOR_3 is required with 4 HOTENDS." #elif !HAS_HEATER_3 #error "HEATER_3_PIN not defined for this board." #elif !PIN_EXISTS(TEMP_3) #error "TEMP_3_PIN not defined for this board." #endif #endif #endif #endif #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0 #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." #endif /** * Test Extruder Pins */ #if EXTRUDERS > 3 #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE) #error E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board. #endif #elif EXTRUDERS > 2 #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE) #error E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board. #endif #elif EXTRUDERS > 1 #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE) #error E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board. #endif #endif /** * Endstops */ #if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_) #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG" #elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_) #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG" #elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_) #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG" #elif ENABLED(Z_DUAL_ENDSTOPS) && !Z2_USE_ENDSTOP #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS" #endif /** * Warnings for old configurations */ #if WATCH_TEMP_PERIOD > 500 #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds." #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS." #elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD) #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED." #elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE) #error "Z_LATE_ENABLE can't be used with COREXZ." #elif defined(X_HOME_RETRACT_MM) #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM." #elif defined(PROBE_SERVO_DEACTIVATION_DELAY) #error "PROBE_SERVO_DEACTIVATION_DELAY has been replaced with DEACTIVATE_SERVOS_AFTER_MOVE and SERVO_DEACTIVATION_DELAY." #elif defined(BEEPER) #error "BEEPER is now BEEPER_PIN. Please update your pins definitions." #elif defined(SDCARDDETECT) #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions." #elif defined(SDCARDDETECTINVERTED) #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration." #elif defined(BTENABLED) #error "BTENABLED is now BLUETOOTH. Please update your configuration." #elif defined(CUSTOM_MENDEL_NAME) #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration." #elif defined(HAS_AUTOMATIC_VERSIONING) #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration." #elif defined(ENABLE_AUTO_BED_LEVELING) #error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration." #elif defined(SDSLOW) #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead." #elif defined(SDEXTRASLOW) #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." #elif defined(Z_RAISE_BEFORE_HOMING) #error "Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead." #elif defined(FILAMENT_SENSOR) #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead." #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead." #elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP) #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2" #elif defined(LANGUAGE_INCLUDE) #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration." #elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y) #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." #elif defined(PID_PARAMS_PER_EXTRUDER) #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." #elif defined(EXTRUDER_WATTS) #error "EXTRUDER_WATTS is deprecated. Use HOTEND_WATTS instead." #endif #endif //SANITYCHECK_H