You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
323 lines
36 KiB
323 lines
36 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Japanese (Kana)
|
|
*
|
|
* LCD Menu Messages
|
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|
*
|
|
*/
|
|
|
|
#ifndef LANGUAGE_KANA_H
|
|
#define LANGUAGE_KANA_H
|
|
|
|
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
|
|
#define SIMULATE_ROMFONT
|
|
#define DISPLAY_CHARSET_ISO10646_KANA
|
|
|
|
// 片仮名表示定義
|
|
#define WELCOME_MSG MACHINE_NAME " ready."
|
|
#define MSG_SD_INSERTED "\xb6\xb0\xc4\xde\xb6\xde\xbf\xb3\xc6\xad\xb3\xbb\xda\xcf\xbc\xc0" // "ｶｰﾄﾞｶﾞｿｳﾆｭｳｻﾚﾏｼﾀ" ("Card inserted")
|
|
#define MSG_SD_REMOVED "\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "ｶｰﾄﾞｶﾞｱﾘﾏｾﾝ" ("Card removed")
|
|
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
|
|
#define MSG_MAIN "\xd2\xb2\xdd" // "ﾒｲﾝ" ("Main")
|
|
#define MSG_AUTOSTART "\xbc\xde\xc4\xde\xb3\xb6\xb2\xbc" // "ｼﾞﾄﾞｳｶｲｼ" ("Autostart")
|
|
#define MSG_DISABLE_STEPPERS "\xd3\xb0\xc0\xb0\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "ﾓｰﾀｰﾃﾞﾝｹﾞﾝ ｵﾌ" ("Disable steppers")
|
|
#define MSG_DEBUG_MENU "\xc3\xde\xca\xde\xaf\xb8\xde\xd2\xc6\xad\xb0" // "ﾃﾞﾊﾞｯｸﾞﾒﾆｭｰ" ("Debug Menu")
|
|
#define MSG_PROGRESS_BAR_TEST "\xcc\xdf\xdb\xb8\xde\xda\xbd\xca\xde\xb0\x20\xc3\xbd\xc4" // "ﾌﾟﾛｸﾞﾚｽﾊﾞｰ ﾃｽﾄ" ("Progress Bar Test")
|
|
#define MSG_AUTO_HOME "\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "ｹﾞﾝﾃﾝﾌｯｷ" ("Auto home")
|
|
#define MSG_AUTO_HOME_X "X\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Xｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home X")
|
|
#define MSG_AUTO_HOME_Y "Y\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Yｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home Y")
|
|
#define MSG_AUTO_HOME_Z "Z\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Zｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home Z")
|
|
#define MSG_LEVEL_BED_HOMING "\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7\xc1\xad\xb3" // "ｹﾞﾝﾃﾝﾌｯｷﾁｭｳ" ("Homing XYZ")
|
|
#define MSG_LEVEL_BED_WAITING "\xda\xcd\xde\xd8\xdd\xb8\xde\xb6\xb2\xbc" // "ﾚﾍﾞﾘﾝｸﾞｶｲｼ" ("Click to Begin")
|
|
#define MSG_LEVEL_BED_NEXT_POINT "\xc2\xb7\xde\xc9\xbf\xb8\xc3\xb2\xc3\xdd\xcd" // "ﾂｷﾞﾉｿｸﾃｲﾃﾝﾍ" ("Next Point")
|
|
#define MSG_LEVEL_BED_DONE "\xda\xcd\xde\xd8\xdd\xb8\xde\xb6\xdd\xd8\xae\xb3" // "ﾚﾍﾞﾘﾝｸﾞｶﾝﾘｮｳ" ("Leveling Done!")
|
|
#define MSG_SET_HOME_OFFSETS "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2" // "ｷｼﾞｭﾝｵﾌｾｯﾄｾｯﾃｲ" ("Set home offsets")
|
|
#define MSG_HOME_OFFSETS_APPLIED "\xb5\xcc\xbe\xaf\xc4\xb6\xde\xc3\xb7\xd6\xb3\xbb\xda\xcf\xbc\xc0" // "ｵﾌｾｯﾄｶﾞﾃｷﾖｳｻﾚﾏｼﾀ" ("Offsets applied")
|
|
#define MSG_SET_ORIGIN "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4" // "ｷｼﾞｭﾝｾｯﾄ" ("Set origin")
|
|
#define MSG_PREHEAT_1 "PLA \xd6\xc8\xc2" // "PLA ﾖﾈﾂ" ("Preheat PLA")
|
|
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
|
|
#define MSG_PREHEAT_1_ALL "PLA \xbd\xcd\xde\xc3\xd6\xc8\xc2" // "PLA ｽﾍﾞﾃﾖﾈﾂ" (" All")
|
|
#define MSG_PREHEAT_1_BEDONLY "PLA \xcd\xde\xaf\xc4\xde\xd6\xc8\xc2" // "PLA ﾍﾞｯﾄﾞﾖﾈﾂ" (" Bed")
|
|
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 "\xbe\xaf\xc3\xb2" // "ｾｯﾃｲ" (" conf")
|
|
#define MSG_PREHEAT_2 "ABS \xd6\xc8\xc2" // "ABS ﾖﾈﾂ" ("Preheat ABS")
|
|
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
|
|
#define MSG_PREHEAT_2_ALL "ABS \xbd\xcd\xde\xc3\xd6\xc8\xc2" // "ABS ｽﾍﾞﾃﾖﾈﾂ" (" All")
|
|
#define MSG_PREHEAT_2_BEDONLY "ABS \xcd\xde\xaf\xc4\xde\xd6\xc8\xc2" // "ABS ﾍﾞｯﾄﾞﾖﾈﾂ" (" Bed")
|
|
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 "\xbe\xaf\xc3\xb2" // "ｾｯﾃｲ" (" conf")
|
|
#define MSG_COOLDOWN "\xb6\xc8\xc2\xc3\xb2\xbc" // "ｶﾈﾂﾃｲｼ" ("Cooldown")
|
|
#define MSG_SWITCH_PS_ON "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xdd" // "ﾃﾞﾝｹﾞﾝ ｵﾝ" ("Switch power on")
|
|
#define MSG_SWITCH_PS_OFF "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "ﾃﾞﾝｹﾞﾝ ｵﾌ" ("Switch power off")
|
|
#define MSG_EXTRUDE "\xb5\xbc\xc0\xde\xbc" // "ｵｼﾀﾞｼ" ("Extrude")
|
|
#define MSG_RETRACT "\xcb\xb7\xba\xd0\xbe\xaf\xc3\xb2" // "ﾋｷｺﾐｾｯﾃｲ" ("Retract")
|
|
#define MSG_MOVE_AXIS "\xbc\xde\xb8\xb2\xc4\xde\xb3" // "ｼﾞｸｲﾄﾞｳ" ("Move axis")
|
|
#define MSG_BED_LEVELING "\xcd\xde\xaf\xc4\xde\xda\xcd\xde\xd8\xdd\xb8\xde" // "ﾍﾞｯﾄﾞﾚﾍﾞﾘﾝｸﾞ" ("Bed Leveling")
|
|
#define MSG_LEVEL_BED "\xcd\xde\xaf\xc4\xde\xda\xcd\xde\xd8\xdd\xb8\xde" // "ﾍﾞｯﾄﾞﾚﾍﾞﾘﾝｸﾞ" ("Level bed")
|
|
#define MSG_MOVING "\xb2\xc4\xde\xb3\xc1\xad\xb3" // "ｲﾄﾞｳﾁｭｳ" ("Moving...")
|
|
#define MSG_FREE_XY "XY\xbc\xde\xb8\x20\xb6\xb2\xce\xb3" // "XYｼﾞｸ ｶｲﾎｳ" ("Free XY")
|
|
#define MSG_MOVE_X "X\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Xｼﾞｸ ｲﾄﾞｳ" ("Move X")
|
|
#define MSG_MOVE_Y "Y\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Yｼﾞｸ ｲﾄﾞｳ" ("Move Y")
|
|
#define MSG_MOVE_Z "Z\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Zｼﾞｸ ｲﾄﾞｳ" ("Move Z")
|
|
#define MSG_MOVE_E "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0" // "ｴｸｽﾄﾙｰﾀﾞｰ" ("Extruder")
|
|
#define MSG_MOVE_01MM "0.1mm \xb2\xc4\xde\xb3" // "0.1mm ｲﾄﾞｳ" ("Move 0.1mm")
|
|
#define MSG_MOVE_1MM " 1mm \xb2\xc4\xde\xb3" // " 1mm ｲﾄﾞｳ" ("Move 1mm")
|
|
#define MSG_MOVE_10MM " 10mm \xb2\xc4\xde\xb3" // " 10mm ｲﾄﾞｳ" ("Move 10mm")
|
|
#define MSG_SPEED "\xbf\xb8\xc4\xde" // "ｿｸﾄﾞ" ("Speed")
|
|
#define MSG_BED_Z "Z\xb5\xcc\xbe\xaf\xc4" // "Zｵﾌｾｯﾄ" ("Bed Z")
|
|
#define MSG_NOZZLE "\xc9\xbd\xde\xd9" // "ﾉｽﾞﾙ" ("Nozzle")
|
|
#define MSG_BED "\xcd\xde\xaf\xc4\xde" // "ﾍﾞｯﾄﾞ" ("Bed")
|
|
#define MSG_FAN_SPEED "\xcc\xa7\xdd\xbf\xb8\xc4\xde" // "ﾌｧﾝｿｸﾄﾞ" ("Fan speed")
|
|
#define MSG_FLOW "\xc4\xbc\xad\xc2\xd8\xae\xb3" // "ﾄｼｭﾂﾘｮｳ" ("Flow")
|
|
#define MSG_CONTROL "\xbe\xb2\xb7\xde\xae" // "ｾｲｷﾞｮ" ("Control")
|
|
#define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " ｻｲﾃｲ" (" Min")
|
|
#define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " ｻｲｺｳ" (" Max")
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " ﾌｧｸﾀｰ" (" Fact")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde\xbe\xb2\xb7\xde\xae" // "ｼﾞﾄﾞｳｵﾝﾄﾞｾｲｷﾞｮ" ("Autotemp")
|
|
#else
|
|
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "ｼﾞﾄﾞｳｵﾝﾄﾞ" ("Autotemp")
|
|
#endif
|
|
#define MSG_ON "\xb5\xdd " // "ｵﾝ " ("On ")
|
|
#define MSG_OFF "\xb5\xcc " // "ｵﾌ " ("Off")
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_SELECT "\xbe\xdd\xc0\xb8" // "ｾﾝﾀｸ" ("Select")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" // "ｶｿｸﾄﾞ mm/s2" ("Accel")
|
|
#define MSG_VX_JERK "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Xｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vx-jerk")
|
|
#define MSG_VY_JERK "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Yｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vy-jerk")
|
|
#define MSG_VZ_JERK "Z\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Zｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vz-jerk")
|
|
#define MSG_VE_JERK "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\x20\xd4\xb8\xc4\xde" // "ｴｸｽﾄﾙｰﾀﾞｰ ﾔｸﾄﾞ" ("Ve-jerk")
|
|
#define MSG_VMAX "\xbb\xb2\xc0\xde\xb2\xb5\xb8\xd8\xbf\xb8\xc4\xde " // "ｻｲﾀﾞｲｵｸﾘｿｸﾄﾞ " ("Vmax ")
|
|
#define MSG_VMIN "\xbb\xb2\xbc\xae\xb3\xb5\xb8\xd8\xbf\xb8\xc4\xde" // "ｻｲｼｮｳｵｸﾘｿｸﾄﾞ" ("Vmin")
|
|
#define MSG_VTRAV_MIN "\xbb\xb2\xbc\xae\xb3\xb2\xc4\xde\xb3\xbf\xb8\xc4\xde" // "ｻｲｼｮｳｲﾄﾞｳｿｸﾄﾞ" ("VTrav min")
|
|
#define MSG_AMAX "\xbb\xb2\xc0\xde\xb2\xb6\xbf\xb8\xc4\xde " // "ｻｲﾀﾞｲｶｿｸﾄﾞ " ("Amax ")
|
|
#else
|
|
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde" // "ｶｿｸﾄﾞ" ("Accel")
|
|
#define MSG_VX_JERK "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde" // "XYｼﾞｸ ﾔｸﾄﾞ" ("Vx-jerk")
|
|
#define MSG_VY_JERK "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde" // "XYｼﾞｸ ﾔｸﾄﾞ" ("Vy-jerk")
|
|
#define MSG_VZ_JERK "Z\xbc\xde\xb8\x20\xd4\xb8\xc4\xde" // "Zｼﾞｸ ﾔｸﾄﾞ" ("Vz-jerk")
|
|
#define MSG_VE_JERK "E\x20\xd4\xb8\xc4\xde" // "E ﾔｸﾄﾞ" ("Ve-jerk")
|
|
#define MSG_VMAX "max\xb5\xb8\xd8\xbf\xb8\xc4\xde " // "maxｵｸﾘｿｸﾄﾞ" ("Vmax ")
|
|
#define MSG_VMIN "min\xb5\xb8\xd8\xbf\xb8\xc4\xde" // "minｵｸﾘｿｸﾄﾞ" ("Vmin")
|
|
#define MSG_VTRAV_MIN "min\xb2\xc4\xde\xb3\xbf\xb8\xc4\xde" // "minｲﾄﾞｳｿｸﾄﾞ" ("VTrav min")
|
|
#define MSG_AMAX "max\xb6\xbf\xb8 " // "maxｶｿｸ " ("Amax ")
|
|
#endif
|
|
#define MSG_A_RETRACT "\xcb\xb7\xba\xd0\xb6\xbf\xb8\xc4\xde" // "ﾋｷｺﾐｶｿｸﾄﾞ" ("A-retract")
|
|
#define MSG_A_TRAVEL "\xb2\xc4\xde\xb3\xb6\xbf\xb8\xc4\xde" // "ｲﾄﾞｳｶｿｸﾄﾞ" ("A-travel")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_STEPS_PER_MM "Steps/mm"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_E1STEPS "E1steps/mm"
|
|
#define MSG_E2STEPS "E2steps/mm"
|
|
#define MSG_E3STEPS "E3steps/mm"
|
|
#define MSG_E4STEPS "E4steps/mm"
|
|
#define MSG_E5STEPS "E5steps/mm"
|
|
#else
|
|
#define MSG_STEPS_PER_MM "Steps"
|
|
#define MSG_XSTEPS "Xsteps"
|
|
#define MSG_YSTEPS "Ysteps"
|
|
#define MSG_ZSTEPS "Zsteps"
|
|
#define MSG_ESTEPS "Esteps"
|
|
#define MSG_E1STEPS "E1steps"
|
|
#define MSG_E2STEPS "E2steps"
|
|
#define MSG_E3STEPS "E3steps"
|
|
#define MSG_E4STEPS "E4steps"
|
|
#define MSG_E5STEPS "E5steps"
|
|
#endif
|
|
#define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "ｵﾝﾄﾞ" ("Temperature")
|
|
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ｳｺﾞｷｾｯﾃｲ" ("Motion")
|
|
#define MSG_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4" // "ﾌｨﾗﾒﾝﾄ" ("Filament")
|
|
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "ﾌｨﾗﾒﾝﾄﾁｮｯｹｲ" ("Fil. Dia.")
|
|
#else
|
|
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｹｲ" ("Fil. Dia.")
|
|
#endif
|
|
#define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCDｺﾝﾄﾗｽﾄ" ("LCD contrast")
|
|
#define MSG_STORE_EEPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "ﾒﾓﾘﾍｶｸﾉｳ" ("Store memory")
|
|
#define MSG_LOAD_EEPROM "\xd2\xd3\xd8\xb6\xd7\xd6\xd0\xba\xd0" // "ﾒﾓﾘｶﾗﾖﾐｺﾐ" ("Load memory")
|
|
#define MSG_RESTORE_FAILSAFE "\xbe\xaf\xc3\xb2\xd8\xbe\xaf\xc4" // "ｾｯﾃｲﾘｾｯﾄ" ("Restore failsafe")
|
|
#define MSG_REFRESH "\xd8\xcc\xda\xaf\xbc\xad" // "ﾘﾌﾚｯｼｭ" ("Refresh")
|
|
#define MSG_WATCH "\xbc\xde\xae\xb3\xce\xb3\xb6\xde\xd2\xdd" // "ｼﾞｮｳﾎｳｶﾞﾒﾝ" ("Info screen")
|
|
#define MSG_PREPARE "\xbc\xde\xad\xdd\xcb\xde\xbe\xaf\xc3\xb2" // "ｼﾞｭﾝﾋﾞｾｯﾃｲ" ("Prepare")
|
|
#define MSG_TUNE "\xc1\xae\xb3\xbe\xb2" // "ﾁｮｳｾｲ" ("Tune")
|
|
#define MSG_PAUSE_PRINT "\xb2\xc1\xbc\xde\xc3\xb2\xbc" // "ｲﾁｼﾞﾃｲｼ" ("Pause print")
|
|
#define MSG_RESUME_PRINT "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resume print")
|
|
#define MSG_STOP_PRINT "\xcc\xdf\xd8\xdd\xc4\xc3\xb2\xbc" // "ﾌﾟﾘﾝﾄﾃｲｼ" ("Stop print")
|
|
#define MSG_CARD_MENU "SD\xb6\xb0\xc4\xde\xb6\xd7\xcc\xdf\xd8\xdd\xc4" // "SDｶｰﾄﾞｶﾗﾌﾟﾘﾝﾄ" ("Print from SD")
|
|
#define MSG_NO_CARD "SD\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "SDｶｰﾄﾞｶﾞｱﾘﾏｾﾝ" ("No SD card")
|
|
#define MSG_DWELL "\xb7\xad\xb3\xbc" // "ｷｭｳｼ" ("Sleep...")
|
|
#define MSG_USERWAIT "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("Wait for user...")
|
|
#define MSG_RESUMING "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resuming print")
|
|
#define MSG_PRINT_ABORTED "\xcc\xdf\xd8\xdd\xc4\xb6\xde\xc1\xad\xb3\xbc\xbb\xda\xcf\xbc\xc0" // "ﾌﾟﾘﾝﾄｶﾞﾁｭｳｼｻﾚﾏｼﾀ" ("Print aborted")
|
|
#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "ｳｺﾞｷﾏｾﾝ" ("No move.")
|
|
#define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "ﾋｼﾞｮｳﾃｲｼ" ("KILLED. ")
|
|
#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "ﾃｲｼｼﾏｼﾀ" ("STOPPED. ")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "ﾋｷｺﾐﾘｮｳ mm" ("Retract mm")
|
|
#define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "ﾋｷｺﾐﾘｮｳS mm" ("Swap Re.mm")
|
|
#define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde mm/s" // "ﾋｷｺﾐｿｸﾄﾞ mm/s" ("Retract V")
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "\xc9\xbd\xde\xd9\xc0\xb2\xcb mm" // "ﾉｽﾞﾙﾀｲﾋ mm" ("Hop mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER "\xce\xbc\xae\xb3\xd8\xae\xb3 mm" // "ﾎｼｮｳﾘｮｳ mm" ("UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "\xce\xbc\xae\xb3\xd8\xae\xb3S mm" // "ﾎｼｮｳﾘｮｳS mm" ("S UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "\xce\xbc\xae\xb3\xbf\xb8\xc4\xde mm/s" // "ﾎｼｮｳｿｸﾄﾞ mm/s" ("UnRet V")
|
|
#else
|
|
#define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3" // "ﾋｷｺﾐﾘｮｳ" ("Retract mm")
|
|
#define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S" // "ﾋｷｺﾐﾘｮｳS" ("Swap Re.mm")
|
|
#define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde" // "ﾋｷｺﾐｿｸﾄﾞ" ("Retract V")
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "\xc9\xbd\xde\xd9\xc0\xb2\xcb" // "ﾉｽﾞﾙﾀｲﾋ" ("Hop mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER "\xce\xbc\xae\xb3\xd8\xae\xb3" // "ﾎｼｮｳﾘｮｳ" ("UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "\xce\xbc\xae\xb3\xd8\xae\xb3S" // "ﾎｼｮｳﾘｮｳS" ("S UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "\xce\xbc\xae\xb3\xbf\xb8\xc4\xde" // "ﾎｼｮｳｿｸﾄﾞ" ("UnRet V")
|
|
#endif
|
|
#define MSG_AUTORETRACT "\xbc\xde\xc4\xde\xb3\xcb\xb7\xba\xd0" // "ｼﾞﾄﾞｳﾋｷｺﾐ" ("AutoRetr.")
|
|
#define MSG_FILAMENTCHANGE "\xcc\xa8\xd7\xd2\xdd\xc4\xba\xb3\xb6\xdd" // "ﾌｨﾗﾒﾝﾄｺｳｶﾝ" ("Change filament")
|
|
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "SDｶｰﾄﾞｻｲﾖﾐｺﾐ" ("Init. SD card")
|
|
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "SDｶｰﾄﾞｺｳｶﾝ" ("Change SD card")
|
|
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Zﾌﾟﾛｰﾌﾞ ﾍﾞｯﾄﾞｶﾞｲ" ("Z probe out. bed")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbc\xde\xba\xbc\xdd\xc0\xde\xdd" // "BLTouch ｼﾞｺｼﾝﾀﾞﾝ" ("BLTouch Self-Test")
|
|
#else
|
|
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbe\xd9\xcc\xc3\xbd\xc4" // "BLTouch ｾﾙﾌﾃｽﾄ" ("BLTouch Self-Test")
|
|
#endif
|
|
#define MSG_BLTOUCH_RESET "BLTouch \xd8\xbe\xaf\xc4" // "BLTouch ﾘｾｯﾄ" ("Reset BLTouch")
|
|
#define MSG_HOME "\xbb\xb7\xc6" // "ｻｷﾆ" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2" // "ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" ("first")
|
|
#else
|
|
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xd6" // "ｦﾌｯｷｻｾﾖ" ("first")
|
|
#endif
|
|
#define MSG_ZPROBE_ZOFFSET "Z\xb5\xcc\xbe\xaf\xc4" // "Zｵﾌｾｯﾄ" ("Z Offset")
|
|
#define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Xｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep X")
|
|
#define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Yｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Y")
|
|
#define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Zｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Z")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1\xb7\xc9\xb3" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁｷﾉｳ" ("Endstop abort")
|
|
#else
|
|
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁ" ("Endstop abort")
|
|
#endif
|
|
#define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xdf\xb2" // "ｶﾈﾂｼｯﾊﾟｲ" ("Heating failed")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀｰｷﾉｳ" ("Err: REDUNDANT TEMP")
|
|
#else
|
|
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀ" ("Err: REDUNDANT TEMP")
|
|
#endif
|
|
#define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "ﾈﾂﾎﾞｳｿｳ" ("THERMAL RUNAWAY")
|
|
#define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP")
|
|
#define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP BED")
|
|
#define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP BED")
|
|
#else
|
|
#define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲｺｳｵﾝ" ("Err: MAXTEMP BED")
|
|
#define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲﾃｲｵﾝ" ("Err: MINTEMP BED")
|
|
#endif
|
|
#define MSG_ERR_Z_HOMING MSG_HOME " " MSG_X MSG_Y " " MSG_FIRST // "ｻｷﾆ XY ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" or "ｻｷﾆ XY ｦﾌｯｷｻｾﾖ" ("G28 Z Forbidden")
|
|
#define MSG_HALTED "\xcc\xdf\xd8\xdd\xc0\xb0\xca\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "ﾌﾟﾘﾝﾀｰﾊﾃｲｼｼﾏｼﾀ" ("PRINTER HALTED")
|
|
#define MSG_PLEASE_RESET "\xd8\xbe\xaf\xc4\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ﾘｾｯﾄｼﾃｸﾀﾞｻｲ" ("Please reset")
|
|
#define MSG_SHORT_DAY "d" // One character only
|
|
#define MSG_SHORT_HOUR "h" // One character only
|
|
#define MSG_SHORT_MINUTE "m" // One character only
|
|
#define MSG_HEATING "\xb6\xc8\xc2\xc1\xad\xb3" // "ｶﾈﾂﾁｭｳ" ("Heating...")
|
|
#define MSG_HEATING_COMPLETE "\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "ｶﾈﾂｶﾝﾘｮｳ" ("Heating done.")
|
|
#define MSG_BED_HEATING "\xcd\xde\xaf\xc4\xde\x20\xb6\xc8\xc2\xc1\xad\xb3" // "ﾍﾞｯﾄﾞ ｶﾈﾂﾁｭｳ" ("Bed Heating.")
|
|
#define MSG_BED_DONE "\xcd\xde\xaf\xc4\xde\x20\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "ﾍﾞｯﾄﾞ ｶﾈﾂｶﾝﾘｮｳ" ("Bed done.")
|
|
#define MSG_DELTA_CALIBRATE "\xc3\xde\xd9\xc0\x20\xba\xb3\xbe\xb2" // "ﾃﾞﾙﾀ ｺｳｾｲ" ("Delta Calibration")
|
|
#define MSG_DELTA_CALIBRATE_X "X\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Xｼﾞｸ ｺｳｾｲ" ("Calibrate X")
|
|
#define MSG_DELTA_CALIBRATE_Y "Y\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Yｼﾞｸ ｺｳｾｲ" ("Calibrate Y")
|
|
#define MSG_DELTA_CALIBRATE_Z "Z\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Zｼﾞｸ ｺｳｾｲ" ("Calibrate Z")
|
|
#define MSG_DELTA_CALIBRATE_CENTER "\xc1\xad\xb3\xbc\xdd\x20\xba\xb3\xbe\xb2" // "ﾁｭｳｼﾝ ｺｳｾｲ" ("Calibrate Center")
|
|
#define MSG_INFO_MENU "\xba\xc9\xcc\xdf\xd8\xdd\xc0\xb0\xc6\xc2\xb2\xc3" // "ｺﾉﾌﾟﾘﾝﾀｰﾆﾂｲﾃ" ("About Printer")
|
|
#define MSG_INFO_PRINTER_MENU "\xcc\xdf\xd8\xdd\xc0\xb0\xbc\xde\xae\xb3\xce\xb3" // "ﾌﾟﾘﾝﾀｰｼﾞｮｳﾎｳ" ("Printer Info")
|
|
#define MSG_INFO_STATS_MENU "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xae\xb3\xb7\xae\xb3" // "ﾌﾟﾘﾝﾄｼﾞｮｳｷｮｳ" ("Printer Stats")
|
|
#define MSG_INFO_BOARD_MENU "\xbe\xb2\xb7\xde\xae\xb9\xb2\xbc\xde\xae\xb3\xce\xb3" // "ｾｲｷﾞｮｹｲｼﾞｮｳﾎｳ" ("Board Info")
|
|
#define MSG_INFO_THERMISTOR_MENU "\xbb\xb0\xd0\xbd\xc0\xb0" // "ｻｰﾐｽﾀｰ" ("Thermistors")
|
|
#define MSG_INFO_EXTRUDERS "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\xbd\xb3" // "ｴｸｽﾄﾙｰﾀﾞｰｽｳ" ("Extruders")
|
|
#define MSG_INFO_BAUDRATE "\xce\xde\xb0\xda\xb0\xc4" // "ﾎﾞｰﾚｰﾄ" ("Baud")
|
|
#define MSG_INFO_PROTOCOL "\xcc\xdf\xdb\xc4\xba\xd9" // "ﾌﾟﾛﾄｺﾙ" ("Protocol")
|
|
#define MSG_CASE_LIGHT "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2" // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ" ("Case light")
|
|
#define MSG_INFO_PRINT_COUNT "\xcc\xdf\xd8\xdd\xc4\xbd\xb3" // "ﾌﾟﾘﾝﾄｽｳ" ("Print Count")
|
|
#define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "ｶﾝﾘｮｳｽｳ" ("Completed")
|
|
#define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "ﾌﾟﾘﾝﾄｼﾞｶﾝﾙｲｹｲ" ("Total print time")
|
|
#define MSG_INFO_PRINT_LONGEST "\xbb\xb2\xc1\xae\xb3\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd" // "ｻｲﾁｮｳﾌﾟﾘﾝﾄｼﾞｶﾝ" ("Longest job time")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbc\xd6\xb3\xd8\xae\xb3\xd9\xb2\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｼﾖｳﾘｮｳﾙｲｹｲ" ("Extruded total")
|
|
#else
|
|
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xbc\xd6\xb3\xd8\xae\xb3" // "ﾌｨﾗﾒﾝﾄｿｳｼﾖｳﾘｮｳ" ("Extruded")
|
|
#endif
|
|
#define MSG_INFO_MIN_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xc3\xb2\xb5\xdd" // "ｾｯﾃｲｻｲﾃｲｵﾝ" ("Min Temp")
|
|
#define MSG_INFO_MAX_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xba\xb3\xb5\xdd" // "ｾｯﾃｲｻｲｺｳｵﾝ" ("Max Temp")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd\xbc\xad\xcd\xde\xc2" // "ﾃﾞﾝｹﾞﾝｼｭﾍﾞﾂ" ("Power Supply")
|
|
#else
|
|
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd" // "ﾃﾞﾝｹﾞﾝ" ("Power Supply")
|
|
#endif
|
|
#define MSG_DRIVE_STRENGTH "\xd3\xb0\xc0\xb0\xb8\xc4\xde\xb3\xd8\xae\xb8" // "ﾓｰﾀｰｸﾄﾞｳﾘｮｸ" ("Drive Strength")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8 %" // "DACｼｭﾂﾘｮｸ %" ("Driver %")
|
|
#else
|
|
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACｼｭﾂﾘｮｸ" ("Driver %")
|
|
#endif
|
|
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EPROM // "ﾒﾓﾘﾍｶｸﾉｳ" ("DAC EEPROM Write")
|
|
#define MSG_FILAMENT_CHANGE_HEADER "PRINT PAUSED"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "RESUME OPTIONS:"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "\xbb\xd7\xc6\xb5\xbc\xc0\xde\xbd" // "ｻﾗﾆｵｼﾀﾞｽ" ("Extrude more")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resume print")
|
|
|
|
#if LCD_HEIGHT >= 4
|
|
// Up to 3 lines allowed
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Wait for start")
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("of the filament")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Wait for")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament unload")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xa6\xbf\xb3\xc6\xad\xb3\xbc," // "ﾌｨﾗﾒﾝﾄｦｿｳﾆｭｳｼ," ("Insert filament")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 "\xb8\xd8\xaf\xb8\xbd\xd9\xc4\xbf\xde\xaf\xba\xb3\xbc\xcf\xbd" // "ｸﾘｯｸｽﾙﾄｿﾞｯｺｳｼﾏｽ" ("and press button")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Wait for")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament load")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｵｼﾀﾞｼﾁｭｳ" ("Wait for")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament extrude")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Wait for print")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("to resume")
|
|
#else // LCD_HEIGHT < 4
|
|
// Up to 2 lines allowed
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Please wait...")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Ejecting...")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｼﾃｸﾀﾞｻｲ" ("Insert and Click")
|
|
#else
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｾﾖ" ("Insert and Click")
|
|
#endif
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Loading...")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｵｼﾀﾞｼﾁｭｳ" ("Extruding...")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Resuming...")
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
#endif // LANGUAGE_KANA_H
|