You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
931 lines
26 KiB
931 lines
26 KiB
/**
|
|
* Lightweight Status Screen for the RepRapDiscount Full
|
|
* Graphics Smart Controller (ST7920-based 128x64 LCD)
|
|
*
|
|
* (c) 2017 Aleph Objects, Inc.
|
|
*
|
|
* The code in this page is free software: you can
|
|
* redistribute it and/or modify it under the terms of the GNU
|
|
* General Public License (GNU GPL) as published by the Free Software
|
|
* Foundation, either version 3 of the License, or (at your option)
|
|
* any later version. The code is distributed WITHOUT ANY WARRANTY;
|
|
* without even the implied warranty of MERCHANTABILITY or FITNESS
|
|
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Implementation of a Status Screen for the RepRapDiscount
|
|
* Full Graphics Smart Controller using native ST7920 commands
|
|
* instead of U8Glib.
|
|
*
|
|
* This alternative Status Screen makes use of the built-in character
|
|
* generation capabilities of the ST7920 to update the Status Screen
|
|
* with less SPI traffic and CPU use. In particular:
|
|
*
|
|
* - The fan and bed animations are handled using custom characters
|
|
* that are stored in CGRAM. This allows for the animation to be
|
|
* updated by writing a single character to the text-buffer (DDRAM).
|
|
*
|
|
* - All the information in the Status Screen is text that is written
|
|
* to DDRAM, so the work of generating the bitmaps is offloaded to
|
|
* the ST7920 rather than being render by U8Glib on the MCU.
|
|
*
|
|
* - The graphics buffer (GDRAM) is only used for static graphics
|
|
* elements (nozzle and feedrate bitmaps) and for the progress
|
|
* bar, so updates are sporadic.
|
|
*/
|
|
|
|
#include "status_screen_lite_ST7920_class.h"
|
|
|
|
#include "duration_t.h"
|
|
|
|
#define BUFFER_WIDTH 256
|
|
#define BUFFER_HEIGHT 32
|
|
|
|
#define DDRAM_LINE_1 0x00
|
|
#define DDRAM_LINE_2 0x10
|
|
#define DDRAM_LINE_3 0x08
|
|
#define DDRAM_LINE_4 0x18
|
|
|
|
ST7920_Lite_Status_Screen::st7920_state_t ST7920_Lite_Status_Screen::current_bits;
|
|
|
|
void ST7920_Lite_Status_Screen::cmd(const uint8_t cmd) {
|
|
if (!current_bits.synced || !current_bits.cmd) {
|
|
current_bits.synced = true;
|
|
current_bits.cmd = true;
|
|
sync_cmd();
|
|
}
|
|
write_byte(cmd);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::begin_data() {
|
|
if (!current_bits.synced || current_bits.cmd) {
|
|
current_bits.synced = true;
|
|
current_bits.cmd = false;
|
|
sync_dat();
|
|
}
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::write_str(const char *str) {
|
|
while (*str) write_byte(*str++);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::write_str(const char *str, uint8_t len) {
|
|
while (*str && len--) write_byte(*str++);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::write_str_P(const char * const str) {
|
|
const char *p_str = (const char *)str;
|
|
while (char c = pgm_read_byte_near(p_str++)) write_byte(c);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::write_str(progmem_str str) {
|
|
write_str_P((const char*)str);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::write_number(const int16_t value, const uint8_t digits/*=3*/) {
|
|
char str[7];
|
|
const char *fmt;
|
|
switch (digits) {
|
|
case 6: fmt = PSTR("%6d"); break;
|
|
case 5: fmt = PSTR("%5d"); break;
|
|
case 4: fmt = PSTR("%4d"); break;
|
|
case 3: fmt = PSTR("%3d"); break;
|
|
case 2: fmt = PSTR("%2d"); break;
|
|
case 1: fmt = PSTR("%1d"); break;
|
|
}
|
|
sprintf_P(str, fmt, value);
|
|
write_str(str);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::display_status(const bool display_on, const bool cursor_on, const bool blink_on) {
|
|
extended_function_set(false);
|
|
cmd(0b00001000 |
|
|
(display_on ? 0b0100 : 0) |
|
|
(cursor_on ? 0b0010 : 0) |
|
|
(blink_on ? 0b0001 : 0)
|
|
);
|
|
}
|
|
|
|
// Sets the extended and graphics bits simultaneously, regardless of
|
|
// the current state. This is a helper function for extended_function_set()
|
|
// and graphics()
|
|
void ST7920_Lite_Status_Screen::_extended_function_set(const bool extended, const bool graphics) {
|
|
cmd( 0b00100000 |
|
|
(extended ? 0b00000100 : 0) |
|
|
(graphics ? 0b00000010 : 0)
|
|
);
|
|
current_bits.extended = extended;
|
|
current_bits.graphics = graphics;
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::extended_function_set(const bool extended) {
|
|
if (extended != current_bits.extended)
|
|
_extended_function_set(extended, current_bits.graphics);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::graphics(const bool graphics) {
|
|
if (graphics != current_bits.graphics)
|
|
_extended_function_set(current_bits.extended, graphics);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::entry_mode_select(const bool ac_increase, const bool shift) {
|
|
extended_function_set(false);
|
|
cmd(0b00000100 |
|
|
(ac_increase ? 0b00000010 : 0) |
|
|
(shift ? 0b00000001 : 0)
|
|
);
|
|
}
|
|
|
|
// Sets the sa bit regardless of the current state. This is a helper
|
|
// function for scroll_or_addr_select()
|
|
void ST7920_Lite_Status_Screen::_scroll_or_addr_select(const bool sa) {
|
|
extended_function_set(true);
|
|
cmd(0b00100010 |
|
|
(sa ? 0b000001 : 0)
|
|
);
|
|
current_bits.sa = sa;
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::scroll_or_addr_select(const bool sa) {
|
|
if (sa != current_bits.sa)
|
|
_scroll_or_addr_select(sa);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::set_ddram_address(const uint8_t addr) {
|
|
extended_function_set(false);
|
|
cmd(0b10000000 | (addr & 0b00111111));
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::set_cgram_address(const uint8_t addr) {
|
|
extended_function_set(false);
|
|
cmd(0b01000000 | (addr & 0b00111111));
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::set_gdram_address(const uint8_t x, const uint8_t y) {
|
|
extended_function_set(true);
|
|
cmd(0b10000000 | (y & 0b01111111));
|
|
cmd(0b10000000 | (x & 0b00001111));
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::clear() {
|
|
extended_function_set(false);
|
|
cmd(0x00000001);
|
|
delay(15); //delay for CGRAM clear
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::home() {
|
|
extended_function_set(false);
|
|
cmd(0x00000010);
|
|
}
|
|
|
|
/* This fills the entire text buffer with spaces */
|
|
void ST7920_Lite_Status_Screen::clear_ddram() {
|
|
set_ddram_address(DDRAM_LINE_1);
|
|
begin_data();
|
|
for (uint8_t i = 64; i--;) write_byte(' ');
|
|
}
|
|
|
|
/* This fills the entire graphics buffer with zeros */
|
|
void ST7920_Lite_Status_Screen::clear_gdram() {
|
|
for (uint8_t y = 0; y < BUFFER_HEIGHT; y++) {
|
|
set_gdram_address(0, y);
|
|
begin_data();
|
|
for (uint8_t i = (BUFFER_WIDTH) / 16; i--;) write_word(0);
|
|
}
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::load_cgram_icon(const uint16_t addr, const void *data) {
|
|
const uint16_t *p_word = (const uint16_t *)data;
|
|
set_cgram_address(addr);
|
|
begin_data();
|
|
for (uint8_t i = 16; i--;)
|
|
write_word(pgm_read_word_near(p_word++));
|
|
}
|
|
|
|
/**
|
|
* Draw an icon in GDRAM. Position specified in DDRAM
|
|
* coordinates. i.e., X from 1 to 8, Y from 1 to 4.
|
|
*/
|
|
void ST7920_Lite_Status_Screen::draw_gdram_icon(uint8_t x, uint8_t y, const void *data) {
|
|
const uint16_t *p_word = (const uint16_t *)data;
|
|
if (y > 2) { // Handle display folding
|
|
y -= 2;
|
|
x += 8;
|
|
}
|
|
--x;
|
|
--y;
|
|
for (int i = 0; i < 16; i++) {
|
|
set_gdram_address(x, i + y * 16);
|
|
begin_data();
|
|
write_word(pgm_read_word_near(p_word++));
|
|
}
|
|
}
|
|
|
|
/************************** ICON DEFINITIONS *************************************/
|
|
|
|
#define CGRAM_ICON_1_ADDR 0x00
|
|
#define CGRAM_ICON_2_ADDR 0x10
|
|
#define CGRAM_ICON_3_ADDR 0x20
|
|
#define CGRAM_ICON_4_ADDR 0x30
|
|
|
|
#define CGRAM_ICON_1_WORD 0x00
|
|
#define CGRAM_ICON_2_WORD 0x02
|
|
#define CGRAM_ICON_3_WORD 0x04
|
|
#define CGRAM_ICON_4_WORD 0x06
|
|
|
|
const uint8_t degree_symbol_y_top = 1;
|
|
PROGMEM const uint8_t degree_symbol[] = {
|
|
0b00110000,
|
|
0b01001000,
|
|
0b01001000,
|
|
0b00110000,
|
|
};
|
|
|
|
const uint16_t nozzle_icon[] PROGMEM = {
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000111111110000,
|
|
0b0001111111111000,
|
|
0b0001111111111000,
|
|
0b0001111111111000,
|
|
0b0000111111110000,
|
|
0b0000111111110000,
|
|
0b0001111111111000,
|
|
0b0001111111111000,
|
|
0b0001111111111000,
|
|
0b0000011111100000,
|
|
0b0000001111000000,
|
|
0b0000000110000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000
|
|
};
|
|
|
|
const uint16_t bed_icon[] PROGMEM = {
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0111111111111110,
|
|
0b0111111111111110,
|
|
0b0110000000000110,
|
|
0b0000000000000000,
|
|
0b0000000000000000
|
|
};
|
|
|
|
const uint16_t heat1_icon[] PROGMEM = {
|
|
0b0000000000000000,
|
|
0b0010001000100000,
|
|
0b0001000100010000,
|
|
0b0000100010001000,
|
|
0b0000100010001000,
|
|
0b0001000100010000,
|
|
0b0010001000100000,
|
|
0b0010001000100000,
|
|
0b0001000100010000,
|
|
0b0000100010001000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000
|
|
};
|
|
|
|
const uint16_t heat2_icon[] PROGMEM = {
|
|
0b0000000000000000,
|
|
0b0000100010001000,
|
|
0b0000100010001000,
|
|
0b0001000100010000,
|
|
0b0010001000100000,
|
|
0b0010001000100000,
|
|
0b0001000100010000,
|
|
0b0000100010001000,
|
|
0b0000100010001000,
|
|
0b0001000100010000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000,
|
|
0b0000000000000000
|
|
};
|
|
|
|
const uint16_t fan1_icon[] PROGMEM = {
|
|
0b0000000000000000,
|
|
0b0111111111111110,
|
|
0b0111000000001110,
|
|
0b0110001111000110,
|
|
0b0100001111000010,
|
|
0b0100000110000010,
|
|
0b0101100000011010,
|
|
0b0101110110111010,
|
|
0b0101100000011010,
|
|
0b0100000110000010,
|
|
0b0100001111000010,
|
|
0b0110001111000110,
|
|
0b0111000000001110,
|
|
0b0111111111111110,
|
|
0b0000000000000000,
|
|
0b0000000000000000
|
|
};
|
|
|
|
const uint16_t fan2_icon[] PROGMEM = {
|
|
0b0000000000000000,
|
|
0b0111111111111110,
|
|
0b0111000000001110,
|
|
0b0110010000100110,
|
|
0b0100111001110010,
|
|
0b0101111001111010,
|
|
0b0100110000110010,
|
|
0b0100000110000010,
|
|
0b0100110000110010,
|
|
0b0101111001111010,
|
|
0b0100111001110010,
|
|
0b0110010000100110,
|
|
0b0111000000001110,
|
|
0b0111111111111110,
|
|
0b0000000000000000,
|
|
0b0000000000000000
|
|
};
|
|
|
|
const uint16_t feedrate_icon[] PROGMEM = {
|
|
0b0000000000000000,
|
|
0b0111111000000000,
|
|
0b0110000000000000,
|
|
0b0110000000000000,
|
|
0b0110000000000000,
|
|
0b0111111011111000,
|
|
0b0110000011001100,
|
|
0b0110000011001100,
|
|
0b0110000011001100,
|
|
0b0110000011111000,
|
|
0b0000000011001100,
|
|
0b0000000011001100,
|
|
0b0000000011001100,
|
|
0b0000000011001100,
|
|
0b0000000000000000,
|
|
0b0000000000000000
|
|
};
|
|
|
|
/************************** MAIN SCREEN *************************************/
|
|
|
|
// The ST7920 does not have a degree character, but we
|
|
// can fake it by writing it to GDRAM.
|
|
// This function takes as an argument character positions
|
|
// i.e x is [1-16], while the y position is [1-4]
|
|
void ST7920_Lite_Status_Screen::draw_degree_symbol(uint8_t x, uint8_t y, bool draw) {
|
|
const uint8_t *p_bytes = degree_symbol;
|
|
if (y > 2) {
|
|
// Handle display folding
|
|
y -= 2;
|
|
x += 16;
|
|
}
|
|
x -= 1;
|
|
y -= 1;
|
|
const bool oddChar = x & 1;
|
|
const uint8_t x_word = x >> 1;
|
|
const uint8_t y_top = degree_symbol_y_top;
|
|
const uint8_t y_bot = y_top + sizeof(degree_symbol)/sizeof(degree_symbol[0]);
|
|
for(uint8_t i = y_top; i < y_bot; i++) {
|
|
uint8_t byte = pgm_read_byte_near(p_bytes++);
|
|
set_gdram_address(x_word,i+y*16);
|
|
begin_data();
|
|
if (draw) {
|
|
write_byte(oddChar ? 0x00 : byte);
|
|
write_byte(oddChar ? byte : 0x00);
|
|
}
|
|
else
|
|
write_word(0x0000);
|
|
}
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_static_elements() {
|
|
scroll_or_addr_select(0);
|
|
|
|
// Load the animated bed and fan icons
|
|
load_cgram_icon(CGRAM_ICON_1_ADDR, heat1_icon);
|
|
load_cgram_icon(CGRAM_ICON_2_ADDR, heat2_icon);
|
|
load_cgram_icon(CGRAM_ICON_3_ADDR, fan1_icon);
|
|
load_cgram_icon(CGRAM_ICON_4_ADDR, fan2_icon);
|
|
|
|
// Draw the static icons in GDRAM
|
|
draw_gdram_icon(1, 1, nozzle_icon);
|
|
#if EXTRUDERS == 2
|
|
draw_gdram_icon(1,2,nozzle_icon);
|
|
draw_gdram_icon(1,3,bed_icon);
|
|
#else
|
|
draw_gdram_icon(1,2,bed_icon);
|
|
#endif
|
|
draw_gdram_icon(6,2,feedrate_icon);
|
|
|
|
// Draw the initial fan icon
|
|
draw_fan_icon(false);
|
|
}
|
|
|
|
/**
|
|
* Although this is undocumented, the ST7920 allows the character
|
|
* data buffer (DDRAM) to be used in conjunction with the graphics
|
|
* bitmap buffer (CGRAM). The contents of the graphics buffer is
|
|
* XORed with the data from the character generator. This allows
|
|
* us to make the progess bar out of graphical data (the bar) and
|
|
* text data (the percentage).
|
|
*/
|
|
void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
|
|
#if EXTRUDERS == 1
|
|
// If we have only one extruder, draw a long progress bar on the third line
|
|
const uint8_t top = 1, // Top in pixels
|
|
bottom = 13, // Bottom in pixels
|
|
left = 12, // Left edge, in 16-bit words
|
|
width = 4; // Width of progress bar, in 16-bit words
|
|
#else
|
|
const uint8_t top = 16 + 1,
|
|
bottom = 16 + 13,
|
|
left = 5,
|
|
width = 3;
|
|
#endif
|
|
const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent?
|
|
|
|
// Draw the progress bar as a bitmap in CGRAM
|
|
for (uint8_t y = top; y <= bottom; y++) {
|
|
set_gdram_address(left, y);
|
|
begin_data();
|
|
for (uint8_t x = 0; x < width; x++) {
|
|
uint16_t gfx_word = 0x0000;
|
|
if ((x + 1) * char_pcnt <= value)
|
|
gfx_word = 0xFFFF; // Draw completely filled bytes
|
|
else if ((x * char_pcnt) < value)
|
|
gfx_word = int(0x8000) >> (value % char_pcnt) * 16 / char_pcnt; // Draw partially filled bytes
|
|
|
|
// Draw the frame around the progress bar
|
|
if (y == top || y == bottom)
|
|
gfx_word = 0xFFFF; // Draw top/bottom border
|
|
else if (x == width - 1)
|
|
gfx_word |= 0x0001; // Draw right border
|
|
else if (x == 0)
|
|
gfx_word |= 0x8000; // Draw left border
|
|
write_word(gfx_word);
|
|
}
|
|
}
|
|
|
|
// Draw the percentage as text in DDRAM
|
|
#if EXTRUDERS == 1
|
|
set_ddram_address(DDRAM_LINE_3 + 4);
|
|
begin_data();
|
|
write_byte(' ');
|
|
#else
|
|
set_ddram_address(DDRAM_LINE_2 + left);
|
|
begin_data();
|
|
#endif
|
|
|
|
// Draw centered
|
|
if (value > 9) {
|
|
write_number(value, 4);
|
|
write_str(F("% "));
|
|
}
|
|
else {
|
|
write_number(value, 3);
|
|
write_str(F("% "));
|
|
}
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_fan_icon(const bool whichIcon) {
|
|
set_ddram_address(DDRAM_LINE_1 + 5);
|
|
begin_data();
|
|
write_word(whichIcon ? CGRAM_ICON_3_WORD : CGRAM_ICON_4_WORD);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool heating) {
|
|
set_ddram_address(
|
|
#if EXTRUDERS == 1
|
|
DDRAM_LINE_2
|
|
#else
|
|
DDRAM_LINE_3
|
|
#endif
|
|
);
|
|
begin_data();
|
|
if (heating)
|
|
write_word(whichIcon ? CGRAM_ICON_1_WORD : CGRAM_ICON_2_WORD);
|
|
else {
|
|
write_byte(' ');
|
|
write_byte(' ');
|
|
}
|
|
}
|
|
|
|
#define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 2)
|
|
|
|
static struct {
|
|
bool E1_show_target : 1;
|
|
bool E2_show_target : 1;
|
|
#if HAS_HEATER_BED
|
|
bool bed_show_target : 1;
|
|
#endif
|
|
} display_state = {
|
|
true, true
|
|
#if HAS_HEATER_BED
|
|
, true
|
|
#endif
|
|
};
|
|
|
|
void ST7920_Lite_Status_Screen::draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange) {
|
|
switch (line) {
|
|
case 1: set_ddram_address(DDRAM_LINE_1 + 1); break;
|
|
case 2: set_ddram_address(DDRAM_LINE_2 + 1); break;
|
|
case 3: set_ddram_address(DDRAM_LINE_3 + 1); break;
|
|
case 4: set_ddram_address(DDRAM_LINE_3 + 1); break;
|
|
}
|
|
begin_data();
|
|
write_number(temp);
|
|
|
|
if (showTarget) {
|
|
write_str(F("\x1A"));
|
|
write_number(target);
|
|
};
|
|
|
|
if (targetStateChange) {
|
|
if (!showTarget) write_str(F(" "));
|
|
draw_degree_symbol(6, line, !showTarget);
|
|
draw_degree_symbol(10, line, showTarget);
|
|
}
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
|
|
const bool show_target = target && FAR(temp, target);
|
|
draw_temps(1, temp, target, show_target, display_state.E1_show_target != show_target || forceUpdate);
|
|
display_state.E1_show_target = show_target;
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
|
|
const bool show_target = target && FAR(temp, target);
|
|
draw_temps(2, temp, target, show_target, display_state.E2_show_target != show_target || forceUpdate);
|
|
display_state.E2_show_target = show_target;
|
|
}
|
|
|
|
#if HAS_HEATER_BED
|
|
void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
|
|
const bool show_target = target && FAR(temp, target);
|
|
draw_temps(2
|
|
#if EXTRUDERS > 1
|
|
+ 1
|
|
#endif
|
|
, temp, target, show_target, display_state.bed_show_target != show_target || forceUpdate
|
|
);
|
|
display_state.bed_show_target = show_target;
|
|
}
|
|
#endif
|
|
|
|
void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) {
|
|
set_ddram_address(DDRAM_LINE_1 + 6);
|
|
begin_data();
|
|
write_number(value, 3);
|
|
write_byte('%');
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) {
|
|
#if EXTRUDERS == 1
|
|
set_ddram_address(DDRAM_LINE_3);
|
|
#else
|
|
set_ddram_address(DDRAM_LINE_3 + 5);
|
|
#endif
|
|
char str[7];
|
|
str[elapsed.toDigital(str)] = ' ';
|
|
begin_data();
|
|
write_str(str, 6);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) {
|
|
// We only have enough room for the feedrate when
|
|
// we have one extruder
|
|
#if EXTRUDERS == 1
|
|
set_ddram_address(DDRAM_LINE_2 + 6);
|
|
begin_data();
|
|
write_number(percentage, 3);
|
|
write_byte('%');
|
|
#endif
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_status_message(const char *str) {
|
|
set_ddram_address(DDRAM_LINE_4);
|
|
begin_data();
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
const uint8_t lcd_len = 16;
|
|
const uint8_t padding = 2;
|
|
uint8_t str_len = strlen(str);
|
|
|
|
// Trim whitespace at the end of the str, as for some reason
|
|
// messages like "Card Inserted" are padded with many spaces
|
|
while (str_len > 0 && str[str_len - 1] == ' ') str_len--;
|
|
|
|
if (str_len <= lcd_len) {
|
|
// It all fits on the LCD without scrolling
|
|
write_str(str);
|
|
}
|
|
else {
|
|
// Print the message repeatedly until covering the LCD
|
|
uint8_t c = status_scroll_pos;
|
|
for (uint8_t n = 0; n < lcd_len; n++) {
|
|
write_byte(c < str_len ? str[c] : ' ');
|
|
c++;
|
|
c %= str_len + padding; // Wrap around
|
|
}
|
|
|
|
// Scroll the message
|
|
if (status_scroll_pos == str_len + padding)
|
|
status_scroll_pos = 0;
|
|
else
|
|
status_scroll_pos++;
|
|
}
|
|
#else
|
|
write_str(str, 16);
|
|
#endif
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::draw_position(const float x, const float y, const float z, bool position_known) {
|
|
char str[7];
|
|
set_ddram_address(DDRAM_LINE_4);
|
|
begin_data();
|
|
|
|
// If position is unknown, flash the labels.
|
|
const unsigned char alt_label = position_known ? 0 : (lcd_blink() ? ' ' : 0);
|
|
|
|
dtostrf(x, -4, 0, str);
|
|
write_byte(alt_label ? alt_label : 'X');
|
|
write_str(str, 4);
|
|
|
|
dtostrf(y, -4, 0, str);
|
|
write_byte(alt_label ? alt_label : 'Y');
|
|
write_str(str, 4);
|
|
|
|
dtostrf(z, -5, 1, str);
|
|
write_byte(alt_label ? alt_label : 'Z');
|
|
write_str(str, 5);
|
|
}
|
|
|
|
bool ST7920_Lite_Status_Screen::indicators_changed() {
|
|
// We only add the target temperatures to the checksum
|
|
// because the actual temps fluctuate so by updating
|
|
// them only during blinks we gain a bit of stability.
|
|
const bool blink = lcd_blink();
|
|
const uint8_t feedrate_perc = feedrate_percentage;
|
|
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256;
|
|
const int16_t extruder_1_target = thermalManager.degTargetHotend(0);
|
|
#if EXTRUDERS == 2
|
|
const int16_t extruder_2_target = thermalManager.degTargetHotend(1);
|
|
#endif
|
|
#if HAS_HEATER_BED
|
|
const int16_t bed_target = thermalManager.degTargetBed();
|
|
#endif
|
|
static uint16_t last_checksum = 0;
|
|
const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target
|
|
#if EXTRUDERS == 2
|
|
^ extruder_2_target
|
|
#endif
|
|
#if HAS_HEATER_BED
|
|
^ bed_target
|
|
#endif
|
|
;
|
|
if (last_checksum == checksum) return false;
|
|
last_checksum = checksum;
|
|
return true;
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
|
|
if (forceUpdate || indicators_changed()) {
|
|
const bool blink = lcd_blink();
|
|
const duration_t elapsed = print_job_timer.duration();
|
|
const uint8_t feedrate_perc = feedrate_percentage;
|
|
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256;
|
|
const int16_t extruder_1_temp = thermalManager.degHotend(0),
|
|
extruder_1_target = thermalManager.degTargetHotend(0);
|
|
#if EXTRUDERS == 2
|
|
const int16_t extruder_2_temp = thermalManager.degHotend(1),
|
|
extruder_2_target = thermalManager.degTargetHotend(1);
|
|
#endif
|
|
#if HAS_HEATER_BED
|
|
const int16_t bed_temp = thermalManager.degBed(),
|
|
bed_target = thermalManager.degTargetBed();
|
|
#endif
|
|
|
|
draw_extruder_1_temp(extruder_1_temp, extruder_1_target, forceUpdate);
|
|
#if EXTRUDERS == 2
|
|
draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate);
|
|
#endif
|
|
#if HAS_HEATER_BED
|
|
draw_bed_temp(bed_temp, bed_target, forceUpdate);
|
|
#endif
|
|
draw_fan_speed(fan_speed);
|
|
draw_print_time(elapsed);
|
|
draw_feedrate_percentage(feedrate_perc);
|
|
|
|
// Update the fan and bed animations
|
|
if (fan_speed > 0) draw_fan_icon(blink);
|
|
#if HAS_HEATER_BED
|
|
if (bed_target > 0)
|
|
draw_heat_icon(blink, true);
|
|
else
|
|
draw_heat_icon(false, false);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
bool ST7920_Lite_Status_Screen::position_changed() {
|
|
const float x_pos = current_position[X_AXIS],
|
|
y_pos = current_position[Y_AXIS],
|
|
z_pos = current_position[Z_AXIS];
|
|
const uint8_t checksum = uint8_t(x_pos) ^ uint8_t(y_pos) ^ uint8_t(z_pos);
|
|
|
|
static uint8_t last_checksum = 0;
|
|
if (last_checksum == checksum) return false;
|
|
last_checksum = checksum;
|
|
return true;
|
|
}
|
|
|
|
bool ST7920_Lite_Status_Screen::status_changed() {
|
|
uint8_t checksum = 0;
|
|
for (const char *p = lcd_status_message; *p; p++) checksum ^= *p;
|
|
static uint8_t last_checksum = 0;
|
|
if (last_checksum == checksum) return false;
|
|
last_checksum = checksum;
|
|
return true;
|
|
}
|
|
|
|
bool ST7920_Lite_Status_Screen::blink_changed() {
|
|
static uint8_t last_blink = 0;
|
|
const bool blink = lcd_blink();
|
|
if (last_blink == blink) return false;
|
|
last_blink = blink;
|
|
return true;
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
|
|
#ifndef STATUS_EXPIRE_SECONDS
|
|
#define STATUS_EXPIRE_SECONDS 20
|
|
#endif
|
|
#if STATUS_EXPIRE_SECONDS != 0
|
|
static uint8_t countdown = 0;
|
|
#endif
|
|
|
|
/**
|
|
* There is only enough room in the display for either the
|
|
* status message or the position, not both, so we choose
|
|
* one or another. Whenever the status message changes,
|
|
* we show it for a number of consecutive seconds, but
|
|
* then go back to showing the position as soon as the
|
|
* head moves, i.e:
|
|
*
|
|
* countdown > 1 -- Show status
|
|
* countdown = 1 -- Show status, until movement
|
|
* countdown = 0 -- Show position
|
|
*
|
|
* If STATUS_EXPIRE_SECONDS is zero, then the position
|
|
* display will be disabled and only the status will be
|
|
* shown.
|
|
*/
|
|
if (forceUpdate || status_changed()) {
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
status_scroll_pos = 0;
|
|
#endif
|
|
#if STATUS_EXPIRE_SECONDS != 0
|
|
countdown = lcd_strlen(lcd_status_message) ? STATUS_EXPIRE_SECONDS : 0;
|
|
#endif
|
|
draw_status_message(lcd_status_message);
|
|
blink_changed(); // Clear changed flag
|
|
}
|
|
#if STATUS_EXPIRE_SECONDS == 0
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
else
|
|
draw_status_message(lcd_status_message);
|
|
#endif
|
|
#else
|
|
else if (countdown > 1 && blink_changed()) {
|
|
countdown--;
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
draw_status_message(lcd_status_message);
|
|
#endif
|
|
}
|
|
else if (countdown > 0 && blink_changed()) {
|
|
if (position_changed()) {
|
|
countdown--;
|
|
forceUpdate = true;
|
|
}
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
draw_status_message(lcd_status_message);
|
|
#endif
|
|
}
|
|
if (countdown == 0 && (forceUpdate || position_changed() ||
|
|
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
|
|
blink_changed()
|
|
#endif
|
|
)) {
|
|
draw_position(
|
|
current_position[X_AXIS],
|
|
current_position[Y_AXIS],
|
|
current_position[Z_AXIS],
|
|
#if ENABLED(DISABLE_REDUCED_ACCURACY_WARNING)
|
|
true
|
|
#else
|
|
axis_known_position[X_AXIS] &&
|
|
axis_known_position[Y_AXIS] &&
|
|
axis_known_position[Z_AXIS]
|
|
#endif
|
|
);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
|
|
#if DISABLED(LCD_SET_PROGRESS_MANUALLY)
|
|
uint8_t progress_bar_percent;
|
|
#endif
|
|
|
|
// Set current percentage from SD when actively printing
|
|
#if ENABLED(SDSUPPORT)
|
|
if (IS_SD_PRINTING) progress_bar_percent = card.percentDone();
|
|
#endif
|
|
|
|
// Since the progress bar involves writing
|
|
// quite a few bytes to GDRAM, only do this
|
|
// when an update is actually necessary.
|
|
|
|
static uint8_t last_progress = 0;
|
|
if (!forceUpdate && last_progress == progress_bar_percent) return;
|
|
last_progress = progress_bar_percent;
|
|
|
|
draw_progress_bar(progress_bar_percent);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::update(const bool forceUpdate) {
|
|
cs();
|
|
update_indicators(forceUpdate);
|
|
update_status_or_position(forceUpdate);
|
|
update_progress(forceUpdate);
|
|
ncs();
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::reset_state_from_unknown() {
|
|
_extended_function_set(true, true); // Do it twice as only one bit
|
|
_extended_function_set(true, true); // get set at a time.
|
|
_scroll_or_addr_select(false);
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::on_entry() {
|
|
cs();
|
|
reset_state_from_unknown();
|
|
clear();
|
|
clear_gdram();
|
|
draw_static_elements();
|
|
update(true);
|
|
ncs();
|
|
}
|
|
|
|
void ST7920_Lite_Status_Screen::on_exit() {
|
|
cs();
|
|
clear();
|
|
_extended_function_set(true, true); // Restore state to what u8g expects.
|
|
ncs();
|
|
}
|
|
|
|
// This is called prior to the KILL screen to
|
|
// clear the screen so we don't end up with a
|
|
// garbled display.
|
|
void ST7920_Lite_Status_Screen::clear_text_buffer() {
|
|
cs();
|
|
reset_state_from_unknown();
|
|
clear();
|
|
_extended_function_set(true, true); // Restore state to what u8g expects.
|
|
ncs();
|
|
}
|
|
|
|
static void lcd_implementation_status_screen() {
|
|
ST7920_Lite_Status_Screen::update(false);
|
|
}
|
|
|
|
/**
|
|
* In order to properly update the lite Status Screen,
|
|
* we must know when we have entered and left the
|
|
* Status Screen. Since the ultralcd code is not
|
|
* set up for doing this, we call this function before
|
|
* each update indicating whether the current screen
|
|
* is the Status Screen.
|
|
*
|
|
* This function keeps track of whether we have left or
|
|
* entered the Status Screen and calls the on_entry()
|
|
* and on_exit() methods for cleanup.
|
|
*/
|
|
static void lcd_in_status(const bool inStatus) {
|
|
static bool lastInStatus = false;
|
|
if (lastInStatus == inStatus) return;
|
|
if ((lastInStatus = inStatus))
|
|
ST7920_Lite_Status_Screen::on_entry();
|
|
else
|
|
ST7920_Lite_Status_Screen::on_exit();
|
|
}
|