You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

174 lines
11 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Russian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_RU_H
#define LANGUAGE_RU_H
#define MAPPER_D0D1 // For Cyrillic
#define DISPLAY_CHARSET_ISO10646_5
#define WELCOME_MSG MACHINE_NAME _UxGT(" Готов.")
#define MSG_SD_INSERTED _UxGT("Карта вставлена")
#define MSG_SD_REMOVED _UxGT("Карта извлечена")
#define MSG_MAIN _UxGT("Меню")
#define MSG_LCD_ENDSTOPS _UxGT("концевик")
#define MSG_AUTOSTART _UxGT("Автостарт")
#define MSG_DISABLE_STEPPERS _UxGT("Выкл. двигатели")
#define MSG_AUTO_HOME _UxGT("Парковка")
#define MSG_LEVEL_BED_HOMING _UxGT("Нулевое полож")
#define MSG_LEVEL_BED_WAITING _UxGT("Нажмите начать")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Следующая точка")
#define MSG_LEVEL_BED_DONE _UxGT("Уровень!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Отменить")
#define MSG_SET_HOME_OFFSETS _UxGT("Запомнить парковку")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Коррекции примен")
#define MSG_SET_ORIGIN _UxGT("Запомнить ноль")
#define MSG_PREHEAT_1 _UxGT("Преднагрев PLA")
#define MSG_PREHEAT_1_N _UxGT("Греть PLA Сопло ")
#define MSG_PREHEAT_1_ALL _UxGT("Греть PLA Все")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Греть PLA Стол")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки PLA")
#define MSG_PREHEAT_2 _UxGT("Преднагрев ABS")
#define MSG_PREHEAT_2_N _UxGT("Греть ABS Сопло ")
#define MSG_PREHEAT_2_ALL _UxGT("Греть ABS Все")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Греть ABS Стол")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки ABS")
#define MSG_COOLDOWN _UxGT("Охлаждение")
#define MSG_SWITCH_PS_ON _UxGT("Включить Питание")
#define MSG_SWITCH_PS_OFF _UxGT("Отключить Питание")
#define MSG_EXTRUDE _UxGT("Экструзия")
#define MSG_RETRACT _UxGT("Втягивание")
#define MSG_MOVE_AXIS _UxGT("Движение по осям")
#define MSG_LEVEL_BED _UxGT("Калибровать стол")
#define MSG_MOVE_X _UxGT("Движение по X")
#define MSG_MOVE_Y _UxGT("Движение по Y")
#define MSG_MOVE_Z _UxGT("Движение по Z")
#define MSG_MOVE_E _UxGT("Экструдер")
#define MSG_MOVE_01MM _UxGT("Движение XYZ 0.1mm")
#define MSG_MOVE_1MM _UxGT("Движение XYZ 1mm")
#define MSG_MOVE_10MM _UxGT("Движение XY 10mm")
#define MSG_SPEED _UxGT("Скорость")
#define MSG_BED_Z _UxGT("Z стола")
#define MSG_NOZZLE LCD_STR_THERMOMETER _UxGT(" Сопло")
#define MSG_BED LCD_STR_THERMOMETER _UxGT(" Стол")
#define MSG_FAN_SPEED _UxGT("Кулер")
#define MSG_FLOW _UxGT("Поток")
#define MSG_CONTROL _UxGT("Настройки")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Минимум")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Максимум")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Фактор")
#define MSG_AUTOTEMP _UxGT("Автотемпература")
#define MSG_ON _UxGT("Вкл. ")
#define MSG_OFF _UxGT("Откл. ")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_ACC _UxGT("Acc")
#define MSG_VX_JERK _UxGT("Vx-рывок")
#define MSG_VY_JERK _UxGT("Vy-рывок")
#define MSG_VZ_JERK _UxGT("Vz-рывок")
#define MSG_VE_JERK _UxGT("Ve-рывок")
#define MSG_VMAX _UxGT("Vмакс ")
#define MSG_VMIN _UxGT("Vмин")
#define MSG_VTRAV_MIN _UxGT("Vпутеш. мин")
#define MSG_AMAX _UxGT("Aмакс")
#define MSG_A_RETRACT _UxGT("A-втягивание")
#define MSG_A_TRAVEL _UxGT("A-путеш.")
#define MSG_XSTEPS _UxGT("X шаг/мм")
#define MSG_YSTEPS _UxGT("Y шаг/мм")
#define MSG_ZSTEPS _UxGT("Z шаг/мм")
#define MSG_ESTEPS _UxGT("E шаг/мм")
#define MSG_E1STEPS _UxGT("E1 шаг/мм")
#define MSG_E2STEPS _UxGT("E2 шаг/мм")
#define MSG_E3STEPS _UxGT("E3 шаг/мм")
#define MSG_E4STEPS _UxGT("E4 шаг/мм")
#define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Механика")
#define MSG_FILAMENT _UxGT("Пруток")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E в mm3")
#define MSG_FILAMENT_DIAM _UxGT("Диаметр прутка")
#define MSG_CONTRAST _UxGT("Контраст LCD")
#define MSG_STORE_EEPROM _UxGT("Сохранить в EEPROM")
#define MSG_LOAD_EEPROM _UxGT("Считать из EEPROM")
#define MSG_RESTORE_FAILSAFE _UxGT("Сброс EEPROM")
#define MSG_REFRESH _UxGT("Обновить")
#define MSG_WATCH _UxGT("Обзор")
#define MSG_PREPARE _UxGT("Действия")
#define MSG_TUNE _UxGT("Настройки")
#define MSG_PAUSE_PRINT _UxGT("Пауза печати")
#define MSG_RESUME_PRINT _UxGT("Продолжить печать")
#define MSG_STOP_PRINT _UxGT("Остановить печать")
#define MSG_CARD_MENU _UxGT("Обзор карты")
#define MSG_NO_CARD _UxGT("Нет карты")
#define MSG_DWELL _UxGT("Сон...")
#define MSG_USERWAIT _UxGT("Ожиданиие")
#define MSG_RESUMING _UxGT("Возобновление...")
#define MSG_PRINT_ABORTED _UxGT("Отмена печати")
#define MSG_NO_MOVE _UxGT("Нет движения.")
#define MSG_KILLED _UxGT("УБИТО.")
#define MSG_STOPPED _UxGT("ОСТАНОВЛЕНО.")
#define MSG_CONTROL_RETRACT _UxGT("Втягивание mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Втяг. смены mm")
#define MSG_CONTROL_RETRACTF _UxGT("Втягивание V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Втяг. прыжка mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Возврат mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Возврат смены mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Возврат V")
#define MSG_AUTORETRACT _UxGT("Авто Втягивание")
#define MSG_FILAMENTCHANGE _UxGT("Смена прутка")
#define MSG_INIT_SDCARD _UxGT("Иниц. карту")
#define MSG_CNG_SDCARD _UxGT("Сменить карту")
#define MSG_ZPROBE_OUT _UxGT("Z датчик вне стола")
#define MSG_HOME _UxGT("Паркуй X/Y перед Z")
#define MSG_FIRST _UxGT("первый")
#define MSG_ZPROBE_ZOFFSET _UxGT("Смещение Z")
#define MSG_BABYSTEP_X _UxGT("Микрошаг X")
#define MSG_BABYSTEP_Y _UxGT("Микрошаг Y")
#define MSG_BABYSTEP_Z _UxGT("Микрошаг Z")
#define MSG_ENDSTOP_ABORT _UxGT("Сработал концевик")
#define MSG_HEATING_FAILED_LCD _UxGT("Разогрев не удался")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Ошибка:Слишком горячо")
#define MSG_THERMAL_RUNAWAY _UxGT("ТЕПЛО УБЕГАНИЯ!")
#define MSG_ERR_MAXTEMP _UxGT("Ошибка: Т макс.")
#define MSG_ERR_MINTEMP _UxGT("Ошибка: Т мин.")
#define MSG_ERR_MAXTEMP_BED _UxGT("Ошибка:Т макс.стол")
#define MSG_ERR_MINTEMP_BED _UxGT("Ошибка:Т мин.стол")
#define MSG_HEATING _UxGT("Нагреваю сопло...")
#define MSG_HEATING_COMPLETE _UxGT("Нагрев выполнен")
#define MSG_BED_HEATING _UxGT("Нагреваю стол")
#define MSG_BED_DONE _UxGT("Стол разогрет")
#define MSG_DELTA_CALIBRATE _UxGT("Калибровка Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Калибровать X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровать Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровать Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровать центр")
#endif // LANGUAGE_RU_H