You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Scott Lahteine 9bf87aac6a
Merge pull request #3127 from thinkyhead/rc_core_babystepping
9 years ago
..
Configuration.h Send a Busy signal to hosts during long processes, wait for input, etc 9 years ago
Configuration_adv.h Implement BABYSTEPPING for COREXY and COREXZ 9 years ago
README.md added kossel xl example configuration 9 years ago

README.md

Configuration for Kossel k800 XL

This example configuration ist for a Kossel XL with a printable bed diameter of 280mm and a height of 385mm. It also has the auto bed leveling probe (with a endstop switch) and the heat bed activated.

Configuration

You might have/want to edit at least the following settings in Configuration.h:

  • MANUAL_Z_HOME_POS The hight of your printing space available, auto bed leveling makes this not as important as before
  • DELTA_PRINTABLE_RADIUS The printable radius
  • DEFAULT_AXIS_STEPS_PER_UNIT [http://zennmaster.com/makingstuff/reprap-101-calibrating-your-extruder-part-1-e-steps](The steps for the extruder to optimize the amount of filament flow)

Fine tuning

  • Increase DELTA_RADIUS when the model is convex (bulge in the middle)
  • Increase DELTA_DIAGONAL_ROD when the model is larger then expected

[http://reprap.org/wiki/PID_Tuning](PID Tuning)

  • DEFAULT_Kp (PID tuning for the hotend)
  • DEFAULT_Ki (PID tuning for the hotend)
  • DEFAULT_Kd (PID tuning for the hotend)

PSU Options

  • The power supply is configured to 2 (to use a relay to switch 12V on and off)
  • It is configured to be off by default