You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

249 lines
13 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Czech
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
* Translated by Petr Zahradnik, Computer Laboratory
* Blog and video blog Zahradnik se bavi
* http://www.zahradniksebavi.cz
*
*/
#ifndef LANGUAGE_CZ_H
#define LANGUAGE_CZ_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " pripraven."
#define MSG_SD_INSERTED "Karta vlozena"
#define MSG_SD_REMOVED "Karta vyjmuta"
#define MSG_LCD_ENDSTOPS "Endstopy" // maximalne 8 znaku
#define MSG_MAIN "Hlavni nabidka"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Uvolnit motory"
#define MSG_AUTO_HOME "Domovska pozice"
#define MSG_AUTO_HOME_X "Domu osa X"
#define MSG_AUTO_HOME_Y "Domu osa Y"
#define MSG_AUTO_HOME_Z "Domu osa Z"
#define MSG_LEVEL_BED_HOMING "Mereni podlozky"
#define MSG_LEVEL_BED_WAITING "Kliknutim spustte"
#define MSG_LEVEL_BED_NEXT_POINT "Dalsi bod"
#define MSG_LEVEL_BED_DONE "Mereni hotovo!"
#define MSG_LEVEL_BED_CANCEL "Storno"
#define MSG_SET_HOME_OFFSETS "Nastavit ofsety"
#define MSG_HOME_OFFSETS_APPLIED "Ofsety nastaveny"
#define MSG_SET_ORIGIN "Nastavit pocatek"
#define MSG_PREHEAT_1 "Zahrat PLA"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Vse"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Podloz"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " Nast"
#define MSG_PREHEAT_2 "Zahrat ABS"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Vse"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Podloz"
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " Nast"
#define MSG_COOLDOWN "Zchladit"
#define MSG_SWITCH_PS_ON "Zapnout napajeni"
#define MSG_SWITCH_PS_OFF "Vypnout napajeni"
#define MSG_EXTRUDE "Vytlacit (extr.)"
#define MSG_RETRACT "Zatlacit (retr.)"
#define MSG_MOVE_AXIS "Posunout osy"
#define MSG_LEVEL_BED "Vyrovnat podlozku"
#define MSG_MOVE_X "Posunout X"
#define MSG_MOVE_Y "Posunout Y"
#define MSG_MOVE_Z "Posunout Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Posunout o 0,1mm"
#define MSG_MOVE_1MM "Posunout o 1mm"
#define MSG_MOVE_10MM "Posunout o 10mm"
#define MSG_SPEED "Rychlost"
#define MSG_BED_Z "Vyska podl."
#define MSG_NOZZLE "Tryska"
#define MSG_BED "Podlozka"
#define MSG_FAN_SPEED "Rychlost vent."
#define MSG_FLOW "Prutok"
#define MSG_CONTROL "Ovladani"
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fakt"
#define MSG_AUTOTEMP "Autoteplota"
#define MSG_ON "Zap"
#define MSG_OFF "Vyp"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Vybrat"
#define MSG_ACC "Zrychl"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retrakt"
#define MSG_A_TRAVEL "A-prejezd"
#define MSG_XSTEPS "Xkroku/mm"
#define MSG_YSTEPS "Ykroku/mm"
#define MSG_ZSTEPS "Zkroku/mm"
#define MSG_ESTEPS "Ekroku/mm"
#define MSG_TEMPERATURE "Teplota"
#define MSG_MOTION "Pohyb"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E na mm3"
#define MSG_FILAMENT_DIAM "Fil. Prum."
#define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Ulozit nastaveni"
#define MSG_LOAD_EPROM "Nacist nastaveni"
#define MSG_RESTORE_FAILSAFE "Obnovit vychozi"
#define MSG_REFRESH "Obnovit"
#define MSG_WATCH "Info obrazovka"
#define MSG_PREPARE "Priprava tisku"
#define MSG_TUNE "Doladeni tisku"
#define MSG_PAUSE_PRINT "Pozastavit tisk"
#define MSG_RESUME_PRINT "Obnovit tisk"
#define MSG_STOP_PRINT "Zastavit tisk"
#define MSG_CARD_MENU "Tisknout z SD"
#define MSG_NO_CARD "Zadna SD karta"
#define MSG_DWELL "Uspano..."
#define MSG_USERWAIT "Cekani na uziv..."
#define MSG_RESUMING "Obnovovani tisku"
#define MSG_PRINT_ABORTED "Tisk zrusen"
#define MSG_NO_MOVE "Zadny pohyb."
#define MSG_KILLED "PRERUSENO. "
#define MSG_STOPPED "ZASTAVENO. "
#define MSG_CONTROL_RETRACT "Retrakt mm"
#define MSG_CONTROL_RETRACT_SWAP "Vymena Re.mm"
#define MSG_CONTROL_RETRACTF "Retraktovat V"
#define MSG_CONTROL_RETRACT_ZLIFT "Zvednuti Z mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Vymenit filament"
#define MSG_INIT_SDCARD "Nacist SD kartu"
#define MSG_CNG_SDCARD "Vymenit SD kartu"
#define MSG_ZPROBE_OUT "Sonda Z mimo podl"
#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test"
#define MSG_BLTOUCH_RESET "BLTouch Reset"
#define MSG_HOME "Domu" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "prvni"
#define MSG_ZPROBE_ZOFFSET "Z ofset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_HEATING_FAILED_LCD "Chyba zahrivani"
#define MSG_ERR_REDUNDANT_TEMP "REDUND. TEPLOTA"
#define MSG_THERMAL_RUNAWAY "TEPLOTNI SKOK"
#define MSG_ERR_MAXTEMP "VYSOKA TEPLOTA"
#define MSG_ERR_MINTEMP "NIZKA TEPLOTA"
#define MSG_ERR_MAXTEMP_BED "VYS. TEPL. PODL."
#define MSG_ERR_MINTEMP_BED "NIZ. TEPL. PODL."
#define MSG_ERR_Z_HOMING "G28 Z ZAKAZANO"
#define MSG_HALTED "TISK. ZASTAVENA"
#define MSG_PLEASE_RESET "Provedte reset"
#define MSG_SHORT_DAY "d"
#define MSG_SHORT_HOUR "h"
#define MSG_SHORT_MINUTE "m"
#define MSG_HEATING "Zahrivani..."
#define MSG_HEATING_COMPLETE "Zahrati hotovo."
#define MSG_BED_HEATING "Zahrivani podl."
#define MSG_BED_DONE "Podlozka hotova."
#define MSG_DELTA_CALIBRATE "Delta Kalibrace"
#define MSG_DELTA_CALIBRATE_X "Kalibrovat X"
#define MSG_DELTA_CALIBRATE_Y "Kalibrovat Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibrovat Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibrovat Stred"
#define MSG_INFO_MENU "O tiskarne"
#define MSG_INFO_PRINTER_MENU "Info o tiskarne"
#define MSG_INFO_STATS_MENU "Statistika"
#define MSG_INFO_BOARD_MENU "Info o desce"
#define MSG_INFO_THERMISTOR_MENU "Termistory"
#define MSG_INFO_EXTRUDERS "Extrudery"
#define MSG_INFO_BAUDRATE "Rychlost"
#define MSG_INFO_PROTOCOL "Protokol"
#define MSG_LIGHTS_ON "Osvetleni Zap"
#define MSG_LIGHTS_OFF "Osvetleni Vyp"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Pocet tisku"
#define MSG_INFO_COMPLETED_PRINTS "Dokonceno"
#define MSG_INFO_PRINT_TIME "Celkovy cas"
#define MSG_INFO_PRINT_LONGEST "Nejdelsi tisk"
#define MSG_INFO_PRINT_FILAMENT "Celkem vytlaceno"
#else
#define MSG_INFO_PRINT_COUNT "Tisky"
#define MSG_INFO_COMPLETED_PRINTS "Hotovo"
#define MSG_INFO_PRINT_TIME "Cas"
#define MSG_INFO_PRINT_LONGEST "Nejdelsi"
#define MSG_INFO_PRINT_FILAMENT "Vytlaceno"
#endif
#define MSG_INFO_MIN_TEMP "Teplota min"
#define MSG_INFO_MAX_TEMP "Teplota max"
#define MSG_INFO_PSU "Nap. zdroj"
#define MSG_DRIVE_STRENGTH "Buzeni motoru"
#define MSG_DAC_PERCENT "Motor %"
#define MSG_DAC_EEPROM_WRITE "Ulozit do EEPROM"
#define MSG_FILAMENT_CHANGE_HEADER "VYMENA FILAMENTU"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CO DAL?"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Jeste vytlacit"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Obnovit tisk"
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 "Cekejte prosim"
#define MSG_FILAMENT_CHANGE_INIT_2 "na zahajeni"
#define MSG_FILAMENT_CHANGE_INIT_3 "vymeny filamentu"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Cekejte prosim"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "na vysunuti"
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "filamentu"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Vlozte filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "a stisknete"
#define MSG_FILAMENT_CHANGE_INSERT_3 "tlacitko..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Cekejte prosim"
#define MSG_FILAMENT_CHANGE_LOAD_2 "na zavedeni"
#define MSG_FILAMENT_CHANGE_LOAD_3 "filamentu"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Cekejte prosim"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "na vytlaceni"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "filamentu"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Cekejte prosim"
#define MSG_FILAMENT_CHANGE_RESUME_2 "na pokracovani"
#define MSG_FILAMENT_CHANGE_RESUME_3 "tisku"
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 "Cekejte..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vysouvani..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Vlozte, kliknete"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Zavadeni..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vytlacovani..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Pokracovani..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_CZ_H