Marlin Firmware for a JTech Photonics Laser on a LulzBot TAZ 3D Printer https://www.forksand.com
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Bernhard Kubicek 79d1bfb5c0
made many possible variables static, so they cannot be used extern.
13 years ago
Marlin made many possible variables static, so they cannot be used extern. 13 years ago
README changed end of line to windows, which seems to be the majority of developers main platform. 13 years ago
README.md changed end of line to windows, which seems to be the majority of developers main platform. 13 years ago
merging still needs.txt changed end of line to windows, which seems to be the majority of developers main platform. 13 years ago

README.md

WARNING: THIS IN A PROCESS OF HEAVY OVERWORKING. DO NOT USE THIS ON YOUR MACHINE UNTIL FURTHER NOTICE!!!

===========================================

This RepRap firmware is a mashup between Sprinter, grbl and many original parts.

Derived from Sprinter and Grbl by Erik van der Zalm. Sprinters lead developers are Kliment and caru. Grbls lead developer is Simen Svale Skogsrud. Some features have been added by and configuration has been added by: Bernhard Kubicek, Matthijs Keuper, Bradley Feldman, and others...

Features:

  • Interrupt based movement with real linear acceleration
  • High steprate
  • Look ahead (Keep the speed high when possible. High cornering speed)
  • Interrupt based temperature protection
  • preliminary support for Matthew Roberts advance algorithm For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
  • Full endstop support
  • Simple LCD support (16x2)
  • SD Card support
  • Provisions for Bernhard Kubicek's new hardware control console and 20x4 lcd

This firmware is optimized for Ultimaker's gen6 electronics (including the Ultimaker 1.5.x daughterboard and Arduino Mega 2560).

The default baudrate is 115200.

========================================================================================

Configuring and compilation

Install the latest arduino software IDE/toolset (currently 0022) http://www.arduino.cc/en/Main/Software

Install Ultimaker's RepG 25 build http://software.ultimaker.com (or alternatively install Kliment's printrun/pronterface https://github.com/kliment/Printrun_)

Copy the Ultimaker Marlin firmware https:/github.com/bkubicek/Marlin (Use the download button)

Start the arduino IDE. Select Tools -> Board -> Arduino Mega 2560 Select the correct serial port in Tools ->Serial Port Open Marlin.pde

Click the Verify/Compile button

Click the Upload button If all goes well the firmware is uploading

Start Ultimaker's Custom RepG 25 Make sure Show Experimental Profiles is enabled in Preferences Select Sprinter as the Driver

Press the Connect button.

KNOWN ISSUES: RepG will display: Unknown: marlin x.y.z

That's ok. Enjoy Silky Smooth Printing.